Dose homepage does not access it from a web browser, completely very well traveled so where else within the site?

Similar Questions

• X 51 headset does not work after nearly three years of work very well

  I got my X 51 since August 2014 with no problems. Since a few days ago, the microphone on my headset (Vibration of genius) has stopped working. The headphones work fine.

  I tried the front of rear catch and two different helmets - even. Same headphones on different external co work very well.

  Manage Audio, micro devices has the default value. Nothing is cut according to the levels.

  Downloaded the latest drivers from Realtek, run the installer twice (which uninstalls and reinstalls) - no change.

  When I go to hardware and audio, he has his usual - manage Audio devices, where I did these things. There is also a NVidia control panel with a tab to Set Up Digital Audio, but that just seems to post a link to the Audio devices to manage. Under hardware and sound, there is also an Alienware Audio option (which I don't remember seen before), but still, nothing is cut.

  I tested the microphone on the recording of the acoustic window tab, but no green lines rise when I talk. I also tried a video game, with in-game talk (Mechwarrior Online), no luck there. I also tried the call sound test on Skype, no luck there.

  I'm not sure things:

  I have three listed under record on my acoustic window: Microphone, Line In and Stereo Mix - the other two are disabled...?

  I read something that suggested to uninstall the driver manually and reinstall, but I know not where to do. For example, according to uninstall programs, I see an Nvidia HD Audio Driver 1.3.34.3 which was installed a couple of days - very probably the same day that my microphone no longer works. There is actually a half dozen NVidia components installed so far-should I just uninstall all?

  I read a suggestion on these forums about ePSA running, so I did - and not that fast - and he said no problems.

  I tried the system restore to two days ago, has not always worked. (I'm trying to overthrow that now)

  Only options I can think are either use AlienRespawn to reset to the factory settings, and if it does not, in my view, that I still have the Alienware W7 install disc - could start all over again.

  Any other suggestions before I resort to that?

  cosmic55

  1. There were two jacks for headphones and microphone - which is analog?

  2. I plugged a microphone to the USB - a literal hand micro - and it worked!

  3 do suggest that material analog microphone is broken?

  4. maybe a USB headset work until I get fixed t?

  1 Yes
  2. right kind USB still works. Microphones and USB based headsets do not use the analog sound card hardware at all. They use the circuits of USB and USB-Audio corresponding to the device drivers.
  3. Yes.
  4. Yes. Apart from the replacement of the motherboard, it would be the solution. They make nice Helmets on USB gaming these days here.

• The lateset, 2015.5 edition, does not transfer data from the metadata, only the focal length objective. Disappointment when you want to know what that lens you used. (It allows to rename the files but after you create a second copy. "It's an improvement.)

  The last edition, 2015.5, does not transfer data from the metadata, only the focal length objective. Disappointment when you want to know what that lens you used. (It allows to rename the files but after you create a second copy. "It's an improvement.)

  Yes, copied files from Nikon NEF, DNG.

• Photoshop CS-6 does not open images from Lightroom 5

  I don't have Photoshop CS-6 and Lightroom 5.  Almost all of the images have been created in an environment Windows 7 (64-bit).  I moved to Mac platforms. I moved all the images and the catalog. I changed on Mac platform. I'm now using MAC OS - X (10.9.1).

  I am able to see images in Lightroom, I'm able to edit images in Lightroom. I can export the images to JPEG (for example) from Lightroom.  I have a warning to several images in Lightroom = ' metadata were changed - you want to replace the data or import?

  First time I tried to open an Image in Photoshop Lightroom (back) opens, but does not show a picture and no error message. But when I then look at the recently opened files, the image is in the list. When I click on this point, Photoshop displays, and the error message: "the datamodule can't handle the file format" (which is either RAW or jpeg).

  Another expirience is when I try to open any other image directly from within Photoshop, Photoshop skips the XMP and open the original unmodified file.

  Somehow, there must be a bug, I tried everything without success.  But now I have a good "workaround." I created an export preset in Lightroom that exports my psd image, the last step to open the image in Phtoshop. The only thing you need to do is to remove the psd file, when you don't need it anyymore (for example when I don't use a Photoshop export feature). But the "Workaround" is very uncomfortable.

  

• Update for Sierra and now my Apple music does not appear I have a subscription and I am unable to get my music on the cloud?

  Update for Sierra and now my Apple music does not appear I have a subscription and I am unable to get my music on the cloud?

  Hey there Scotchman2926,

  I understand that you are experiencing some problems with Apple music on Sierra. I have a few suggestions to help you solve this problem. First of all, if you are unable to access the iTunes Store as well as music from Apple, use the information in this article to help resolve this problem:
  

  If you cannot connect to the iTunes Store - Apple Support

  If this does not resolve the problem, you might try signing out of your Apple ID in iTunes and then connect again.

  Thanks to be come to the communities of Apple Support and let us know how it goes.

  See you soon.

• My Inbox to view the sender for each message and now it does not work... How do I get it back to where it was?

  My Inbox to view the sender for each message and now it does not work... How do I get it back to where it was?

  Right-click on the header at the top of the list of messages and select from the list of options.

• Menu to transfer the photos on my memory card does not appear, is there another way I can do?... Without using the usb cord...

  Menu to transfer the photos on my memory card does not appear, is there another way I can do?... Without using the usb cord... He lost. :/

  The following steps may be worth a try:

  Insert your memory card into your Media Player...

  Reach... Start / computer...

  What is the memory card show as a drive letter? (if your Media Player)
  has several slots, there will be several "hard drives" listed... the
  SD card will be one of them)

  If_Yes_right click on the drive letter correct and in the menu... Choose...
  Open... now you should see the directory of the memory card or to explore.

  From there you should be able to drag and drop or copy and paste the
  files in a folder on your hard drive.

  Also... the following items may be worth a visit:

  Windows Vista-
  Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  Windows Vista-
  How to change the auto run settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  Windows Vista-
  AutoPlay: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

• "The cutting tool does not work on your computer right now. Restart etc. "comes when I select the Snipping Tool icon.

  The error message "the snipping tool does not work on your computer right now. Restart etc. "comes when I select the Snipping Tool icon.  However if I select snipping tool in the menu start nothing happens at all.

  Original legislative:

  M.

  Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  -

  Microsoft has suggestions and offerings to

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  -

  Moderator Forum Keith has a few suggestions along this line to

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  -

  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

  -

  You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

  -

  Finally if all else fails, you can look at the rather cryptic system event log. To make, click Start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  `

  When you get your system in good working condition, I invite you to back up your system up to an external hard drive and make it regular periodic updates.

  -

  I hope this helps. Good luck.

• Firefox does not trust, a particular secure Web site I know is course trust but other secure Web sites

  Firefox does not trust, a specific secure Web site I know is safe, but there is no trust other Web sites secure. In addition, Internet Explorer trusted this website and Firefox on another computer trusts of the same site. When I try to connect Firefox tells me it doesn't have a valid certificate (even though I know there is one) and I have to make an exception for you connect. Is it possible that I can fix this and get the appropriate in this particular program of Firefox certificate?

  Be sure to select "All Files" and not "text files" type when you save the file in Notepad (text files add a hidden .txt file extension).

• How to find a specific voice memo file in the backup from my iPhone to my Mac? I know where to find the backup, but not how to recover specific files. Thank you.

  How to find a specific voice memo file in the backup from my iPhone to my Mac? I know where to find the backup, but not how to recover specific files. Thank you.

  You can't look "inside" a backup. Just use iTunes to sync with your iPhone, then you'll see a separate category for voice memos in the sidebar.

• Why not print anything from a web page?

  Why not print anything from a web page?

  Thanks Petstopman. I guess I'll have to go to IE when I want to print off the web. Looks like it would make FF take knowledge.
  Rowane

• The new version does not see my camera. But my cam works well with older versions. What should I do?

  The new version of Skype does not see my camera. But my cam works well with all older versions. And it works with any other programs as well.

  Try to uninstall the version 6.18 and install version Skype 6.14.0.104.

  You can use this download link for the 6.14.0.104 version:

  http://community.Skype.com/T5/Windows-desktop-client/ASUS-USB2-0-webcam-not-recognized-by-Skype-6-18...

  Don't forget to turn off the automatic updates:

  Tools-> Options-> Advanced-> automatic updates-> turn off automatic updates

• Messenger does not update and continues to fall. Have tried different things according to research on the web without success. Very frustrated!

  Messenger does not update and continues to fall. Have tried different things according to research on the web without success. Deleted Outlook connector, nothing helps.  Any ideas? OS is XP SP3.  Very frustrated!

  The message "network error has occurred. trying to read the file"C:\windows\installer\messenger.msi"

  Have removed Outlook connector, nothing helps.  Ran "msicuu2.exe" nothing helps.  Off Zone Alarm - No difference.

  All other programs except the AntiVirus closed during installation.  Would appreciate any help please.

  Hi a_wiseowl,
   
   
  It has a similar post here as well. Check if the advice given in the post will help you.
   
  Update MSN Messenger to Windows Live Messenger 2011, code error 80070643.
   
  If it does not help, post your query in Windows Live Messenger Forums for assistance on this issue.
   

  Kind regards

  Divya R - Microsoft technical support.

• The installation program does not ProPlus.WW\ProPlsWW.cab. Browse to a valid installation source and then click OK.

  I am trying to install the 2007 Office Suite on a computer windows vista laptop.  In the middle of the installation the following code appears:

  The installation program does not ProPlus.WW\ProPlsWW.cab. Browse to a valid installation source and then click OK.

  What should I do to complete the installation.

  Office:

  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

  Office newsgroups

  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Office.misc&lang=en&CR=us

  Discussions of general issues of the Office.

  They will help you with your office questions in the newsgroups Office above.

  See you soon.

  Mick Murphy - Microsoft partner

• My help and support is does not and same time erorr code 0 x 80070424 shows and I didn't do the fix on erroe code no chance

  My help and support is does not and same time erorr code 0 x 80070424 shows and I didn't do the fix on erroe code no chance

  Hello

  (a) don't you make changes to the computer until the problem occurred?

  (b) when was the last time it was working fine?

  (c) what are the troubleshooting steps you tried to solve the problem?

  I suggest you follow the steps in the KB article below and check if it helps:

  http://support.Microsoft.com/kb/968002

  Hope this information is helpful