Dotnet 4.0, cannot be upgraded - "Setup cannot continue because a previous installation requires your computer needs to be rebooted...» »
original title: Dotnet 4.0, cannot be upgraded.
I need help on problem mentioned below, the error obtained when upgrading to 4.0 on XP with SP3 dotnet even machines with and without the dotnet 3.5 installed.
"error: Setup cannot continue because a previous installation requires your computer needs to be restarted." Restart your computer and run the Setup again.
Hello
· Did you do changes on the computer before the show?
Follow these methods.
Method 1: Temporarily disable the security software.
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.
Method 2: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.
After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.
(a) click Start, run.
(b) type msconfigand click OK.
(c) the System Configuration Utility dialog box appears.
(d) click the general tab, click Normal startup - load all services and device drivers and then click OK.
(e) when you are prompted, click on restart to restart the computer.
Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.
http://www.Microsoft.com/download/en/details.aspx?ID=17851
http://www.Microsoft.com/downloads/en/default.aspx
For reference:
How to reset the Windows Update components?
Tags: Windows
Similar Questions
-
Original title: .net framework 4.6
I try to install the software and I get an error message saying
Setup cannot continue because a previous installation requires your computer must be restarted. Restart your computer and run the Setup again.
so I restart my pc and run it again and the same message appears
Try to perform a "clean boot" to start Windows by using a minimal set of drivers and startup programs. This will eliminate software conflicts that occur when you start Windows, install a program or an update or when you run a program in Windows.
http://support.Microsoft.com/kb/929135Perform a clean boot to determine if background programs are interfering with your game or other programs
http://support.Microsoft.com/kb/331796One by one add back an application both in the boot list to find the software application incriminated.
J W Stuart: http://www.pagestart.com
-
Hello
Recently, I injured my 9700's screen "BOLD" from blackberry to the point where it was cheaper to buy a new one, so I did and that you bought a new blackberry curve 9320. Now I need to sync my old bb "BOLD" for my mac so I can get all my old in my new bb curve information, because without it I have no information because it is stored on my bb bold and I never the saved... but I still get this error message:
Setup cannot continue, because not all OS requirements have been met. Please upgrade to 10.6.0 or later.
I don't know where to find this version that I downloaed later on the blackberry site. If not, how can I get my information off my old bb "BOLD" on my mac, then in my new curve bb...
If someone wonderful can come to my rescue?
Thanking you in advance
Yes, OK, now I see your problem... I didn't know that your screen has been damaged at this point.
You get this message because the current version of the "BB Desktop Manager" software claims a newer MAC OS on your machine!
Can't upgrade you your Mac OS to the newest? Generally, these improvements are very good markets in the Mac world.
That would allow you to install the software and then (hopefully) make a backup of your machine (blindly?) and therefore to restore the data on your new device!
So my advice would be to upgrade your Mac operating system. The other reason to do it, is that previous versions of the software BBDM are very difficult (does not say impossible) to find on the internet.
Good luck and we keep abreast
-
I'm trying to install windows 7 64 on a 32-bit with the custom installation option. All is well until that right at the end of the installation it gives me this error "Windows Setup cannot continue because a required driver could not be installed. I tried this several times but the same results. I used the windows Upgrade Advisor to see if my computer is compatible and it is no problem.
Error image: http://imgur.com/lOVj6eX
Restore the previous installation of Windows and do the following:
1 disable any security software before you attempt to upgrade or do a clean install.
2. make sure that your computer is updated (devices and applications)
3. disconnect all external devices before installing.
4. check your hard disk for errors:
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: chkdsk /r
When you restart your system, your computer will be scanned for errors and will try to correct them.In addition, run the Windows 7 Upgrade Advisor, it will scan your system and provide a report telling you if your PC can run Windows 7, and if there is no compatibility problems with your hardware or programs.
-
Hello
I try to install windows server enterprise on my hp proliant gen 8. I used smart supply and that everything was working fine, when switching to the windows installation it gets to 99% then comes up with the error:
Windows Setup cannot continue because a required driver could not be installed
I was wondering what I can do to solve this problem, I have tried several times without success. Thank you for your time.
Hello
Your Question is beyond the scope of this community.
I suggest that repost you your question in the Forums of SBS.
https://social.technet.Microsoft.com/forums/en-us/home?Forum=smallbusinessserver
"Windows Small Business Server 2011 Essentials online help"
https://msdn.Microsoft.com/en-us/library/home-client.aspx
See you soon.
-
I have windows xp 32-bit. I have a LifeCam VX-1000. I do not have the CD, but when I plugged it the first time, Microsoft Wizard found the driver and installed it without a problem.
Ran fine for 2 months, then I plugged it in today, I got the "new hardware found". First OFF... what happened to the driver? I have not installed anything new. And then, it will not re-intsaller driver. He invites me for a CD when I try to update the driver through the Device Manager, and when I try to run LifeCam 3.22, I've downloadedMicrosoft , he says "Setup cannot continue because the downloaded file was not signed digitally by Microsoft. "Please try again later." WTF? I downloaded from microsoft. How could he not be digitally signed by microsoft?
How to get back the 'life' in my LifeCam?
The LifeCam 3.22 file could have been damaged during the download process. Download a new copy. Boulder computer Maven
Most Microsoft Valuable Professional -
Setup cannot continue because an error unexpected ha has produced. LifeCam 1.4
Original title: try to download the software update for my LifeCam 1.4 I get: Setup cannot continue because an error unexpected ha has produced. http://support.Microsoft.com/kb/953691
How referring to aid site does not provide any what help, solution, or difficulty. While the help site provides various solutions and recommendations, none of them are actually available, nor work.
I am running 32 bit Windows Vista Home Premium.
Hi Tony Joa,.
Start your computer in a clean boot and try to install. Link below will help you to start the computer in clean boot:http://support.microsoft.com/kb/929135
Make sure that you reset the computer in normal mode (you can see step 7)
With regard to:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Original title: Microsoft LifeCam VX-3000 installation problems
On the insertion of the CD, I get an error message that says:
"Setup cannot continue because you are not connected to the internet or the server is unavailable. Connect you to the internet and run the SETUP again. During the installation process, accept all safety messages or a firewall. »
I am connected to the internet and have tried the setup.exe and allowing the CD auto load with the same error several times running. (Windows xp / laptop Toshiba - all system bus met...) Thanks for any help!
Hi kb11a,
The Knowledge Base article has many resolutions for this issue. Follow the steps. I hope that one of them will fix the problem of the installation.
Resolve the error "Setup cannot continue" when you install the LifeCam software
http://support.Microsoft.com/kb/973297Kind regards
Shinmila H - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think.
-
"SQL Server 2005 Setup cannot continue because the installation package could not be opened."
Hi, I use a 64 bit OS on my computer and I have a problem. AdminStudio gives an error message when running this program.
"SQL Server 2005 Setup cannot continue because the installation package could not be opened. The installation package has a missing file, or you run a single installer 32 bit on a 64-bit computer. To continue, verify the SQL Server 2005, you use the package is supported on WOW64. If you are sure that you are running a SQL Server 2005 supported packages, and you continue to see this message, contact the vendor of the application. »
What can I do about?
Thank you!
Hello again,
Thanks, I solved this problem. This program installs 32-bit as the default value in the path of the folder. This is why it does not work when everyone works beginning... But there is a solution for this topic...
Exactly the solution:
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=22625
Note:
SQLEXPR32. EXE is a smaller package that can be used to install SQL Server Express on 32-bit operating systems only.
The larger SQLEXPR. EXE package supports installation on 32-bit and 64-bit operating systems (WOW install).
-
Original title: 953691
Installation of webcam LifeCam HD-5000. I'm on Windows XP and you get to halfway through the installation and error message came through. Three times so far.
Error message reads
The installation cannot continue because an unexpected error has occurred
http / / microsoft.com//kb/953691 support
Any suggestions?
Hello
· Have you tried the steps mentioned in the article KB 953691?
· What service pack is installed on your Windows XP system and version, 32-bit or 64-bit, what has?
If you have not tried the steps mentioned in the article then, I suggest you try the steps and let know us if the problem is solved or not.
Troubleshoot installation of Intellipoint and IntelliType LifeCam software
http://support.Microsoft.com/kb/953691
If you use Windows XP 64-bit, then the LifeCam HD-5000 is not compatible.
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Visit ourMicrosoft answers feedback Forum and let us know what you think. -
When you try to install Acrobat Professional 11 the following came the installation cannot continue because some of the processes are running.
Installation failed
Setup has encountered an error that caused the installation to fail.
Contact the manufacturer of the software.
If the processes are listed, turn them off prior to launch the installation. Usually, these processes are something running in the background and may include virus protection. Here are some links that can help fill the background programs:
Programs interfere with the Installation of fence
----------------------------------------------Task Manager - PC: (CTRL-ALT-DEL)
http://support.Microsoft.com/kb/323527
Mac - Activity Monitor:
-
Microsoft fix it troubleshooting cannot continue because an error has occurred
Distressed it Center solutions Microsoft, I can't download patches without getting an error message saying "Troubleshooting cannot continue because an error has occurred."
I'm having the same problem. Microsoft does not seem to be interested. I don't buy anything else Microsoft until this is resolved.
-
just after the start of the desktop windows appears and then I get the error message "the application cannot continue because it cannot find the uncdms.dll file" I searched using windows search, nothing helps.
Hello
· Do you remember all the recent changes on the computer before the show?
· What is the service pack installed on the computer?
Uncdms.dll file is associated with the Application of desktop search in Windows that is used to find and view an overview of the different types of files, such as documents, e-mail, photos and music files on a computer.
By default, the uncdms.dll file is located in the folder C:\Windows\System32. The file is more common in 143 872 bytes.
Follow the methods below
Method 1:
To uninstall the Windows Desktop Search from your computer, you must complete the following two tasks:
Step 1: Remove Windows Desktop Search from the boot sequence
To do this, follow the steps below:
a. click on the start menu, click Run.
(b) in the Open box, type msconfig and press ENTER.
c. in the System Configuration Utility dialog box, click the Startup tab.
d. search and clear the check box for any option that is related to Windows Desktop Search or uncdms.dll.
e. restart your computer.
Step 2: Uninstall Windows Desktop Search applications
To uninstall the Windows Desktop Search using the Add / Remove Programs, perform the following steps:
a. click the start menu and select Control Panel utility.
b. double-click the icon Add / Remove programs.
c. in the Add / Remove Programs, locate and select the Windows Desktop Search.
d. press the button Delete.
e. restart your computer.
Method 2:
Run the verification and virus scan online if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx
NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)
-
Original title: run fix it tool center
When I download a Microsoft fix it center tools I get following error message when I try to run the program after downloading
TROUBLESHOOTING CANNOT CONTINUE BECAUSE AN ERROR OCCURRED SAID WERE SORRY, BUT THE PROGRAM HAS ENCOUNTERED AN ERROR TRYING TO CONNECT TO THE SEREVER 8007273DJ CODE
Hi Dave,.
Please send this query to Microsoft Fix it Center Forums. The forum is used to post those on the Microsoft Fix it Center automated troubleshooting tool.
-
I need to create a contact using Lightroom sheet. I get this error message when I try. I had just created one, and then when I tried to create another I could not. He always says "Adobe PDF creation cannot continue because Acrobat is not active."
Could you please install the trial version of Acrobat times compared to the creative clouds and then try to save the file in Jpeg format.
Maybe you are looking for
-
Why firefox doesn't include pages recently accessed menu drop-down with the 'back' button?
This feature is fairly common and useful instead of research in history or up one by one.
-
affect the quality of the thumbnails in fotos-app
iPhone and iPad have enough capacity for a better quality of thumbnails in fotos-app, but not enough for the original library. Is there a setting to affect the quality of the thumbnails? Synchronization by iTunes crates a library with sufficient stam
-
Dv7 ENVY: ENVY dv7 will not start
ENVY laptop computer dv7 will not start. It passes through the start-up phase, but when the office arrives, it shuts down and office back again, again, again, again, etc. never stops trying to load the desktop.
-
the above mentioned was allowed in the beginning.is it possible I need a new plugin stick.as I said this is supposed to contain 4 MB
-
original title: authorization I can't move a folder to another folder, because I 'need to permission' to do. How can I get permission... it's my computer, nobody else uses it.