Double exposure

Similar Questions

• You can adjust the opacity in Adobe video? My goal is to have a clip playing on top of another, similar to a double exposure. If not, is there an iOS application that can?

  You can adjust the opacity in Adobe video? My goal is to have a clip playing on top of another, similar to a double exposure. If not, is there an iOS application that can?

  I dug around and found that imovie 9 will do, not elegant, but looks like it will work for this experience.1

• How to create a photo striped double exposure?

  Hello!

  Does anyone know how to create a picture like that? (:

  

  Kind regards
  Lina

  First get the picture of how you want it to look with curves B & W, etc.

  Go view > presentation of the new Guide and increase the columns to give you the required width.  You need to do to keep him still, or it won't work.

  

  Make a new layer and make sure Snap is on. Then use the marquee tool to make a rectangular selection between each second guide and fill it with black.  This layer is there to allow you to reload the selection.

  

  The portrait layer must be above the layer of black lines.  CTRL, click on the black lines to load selection

  

  .. .and add a layer mask to the layer portrait

  

  Copy the layer of portrait

  Turn guides on (Ctrl);

  Drag the layer of picture copied to the left until it snaps to the guides

  Select the original layer of the portrait and drag to the right until it snaps

  

  Turn guides (Ctrl);

  Select the layer mask on the portrait top layer and invert (Ctrl I)

  

  The overal and contour shape will depend on the priginal portrait and the width of the columns.

  You can refine the alignment using free transform on the layers of two portrait but you must ungroup layer masks (where the red circles are).

  

• How to make a double exposure

  as a cut of my head then using a background of flowers say in my head where I cut.

  HOPE THIS MAKES SENSE

  christina4603 wrote:

  as a cut of my head then using a background of flowers say in my head where I cut.

  HOPE THIS MAKES SENSE

  1. Open the image with your head.
  2. Duplicate the background layer
  3. Close the visibility of the background layer by clicking on the "eye" icon in the layers palette
  4. Activate the selection tool, and then select your head. Once the selection has been completed, you should see a preview ("mobile dash"). Press Delete on the keyboard.
  5. Go to file > place, and then tap on the picture with the flowers. Place. Drag the layer with the flowers between the background layer and the background created copy to the step #2 layer
  6. Use the move tool to position the flowers, if necessary.

  

• How can I make a double exposure on two-sided mobile effect?

  I make a video and a face shot, but what I want to do is put another video inside the face as the face moves as well. I have to hide the face image by image or y at - it an easy way to run this situation?

  copy and make two layers of this video face. I put a mask of garbage near the half dark of the face, including the hair or not (your choice) and then include the video overlay with experimenting the Luma effect. If it makes no sense to you then start with the start after effects tutorials

• Mode of double chassis with a C8484 of Hamamatsu-05 and a PCI-1426

  Hello

  I use a hamamatsu camera CCD C8484-05 (http://sales.hamamatsu.com/en/products/system-division/machine-vision/part-c8484-05.php), with a PCI-1426.

  Despite the site NOR say they are compatible, Hamamatsu, tell me that the camera is compatible only with the 1426 to use drivers OR and not the vi Hamamatsu. (http://sales.hamamatsu.com/index.php?id=13200492&language=1&)

  I find the file .icd for C8484-05 on the Web site of NOR, and using IMAQ, I can control most of the settings using the camera fixed attribute vi.

  However, it doesn't seem to be an option to set the mode of double exposure for PIV (i.e. 2 exposure Framework 2 by using double buffering)

  I have to do it manually by using the low-level buffer commands? For a previous camera (IDT X 3), I was able to select this option in their provided VI.

  If so, could you point me in the direction of some good tutorials for using tampons?

  In addition, there is an easy way to get all the options without copying the text in each menu MAX and using several structures of matter?

  Kind regards

  Joe Sherwood

  Find attached the modified version of the. CIM file for this device (C8484 - 05 c). I saved as a txt to allow download the Forum of nor. Simply change .txt to .icd and place in > National Instruments\NI-IMAQ\Data

  This allows dual-mode frame/PIV using "quick repeat mode also affecting all standard features. The polarity of command is defined positive and the first exhibition is 4.5us, while the second is 81.7ms (without binning)

  I hope it's useful.

  Concerning

  Joe

• How to take photos of the moon with a rebel T5

  I had my camera for a very short period of time. I want to take some pictures of the Moon and I was wondering what I should use the settings.

  You will not see stars if the Moon is correctly exposed. (Remember, it was one of the 'clues' to the moon landings "rigged". The Moon is much brighter than stars and requires much less exposure.

  Note that in the example above, he used HDR, in this case, it is essentially a double exposure.

• Fillable form - "shadow" when entering data in a particular area.

  I have to fill out form where users have problems when they enter a value in the field. It appears as a 'double exposure' or with a shadow - which is the best way I can describe it. See the example below.  This is a required field, free form with the font size set to 10.  Any help would be greatly appreciated. Thank you!

  

  It seems that you have two fields, a right on top of the other, but with different font sizes.  It can be easy to accidentally duplicate a field.

• How to make objects appear as luminesent?

  Is it possible to make objects appear as luminesent as a 'sword of light, a Firefly, glowing light of plants, etc.  Also such an object lit up what ever he was nearby.  Or what about a garden as well as on the film Avatar.  I don't know there must be a way == I bought plug Fractalius, but still not getting what I want.  Can someone help me with this please

  Thank you

  Buxton

  A lot of this has to do with just using adjustment for light objects layers to make it look like the glow: addition of light bouncing off nearby elements, etc. Some are made in double exposure and luminous paint. There are many ways to do this, but it also requires a fair amount of work. For example the image below was made by using two exhibitions with a light hit the center of the flower, making it shine.

  

• How to get this look?

  I started to see more and more graphics like this lately and I really like the concept. Can someone tell me how to do this? I think a simple drawing layer mask or model (in this case, a person/silhouette) white covering the image below should do the trick? Are there ideas or other methods? Any help is greatly appreciated!

  

  Search for tutorials double exposure (it is really simple layer of mixture).

• Help on the realization of technicolor effect

  Hi guys,.

  I am a little confused and hoping that maybe someone has an idea to share. In fact, this should be relatively easy, unfortunately, I'm at a loss to get a similar effect of double exposure vintage technicolor. Attachment image shows what I was hoping to achieve.

  What is me stumping is how to achieve the RGB and CMYK mix colors of the WITHOUT. For example, the magenta and cyan do not mix to make blue. I am also having a hard time to make darker exposures (as in the picture) without losing details.

  Here is what I tried:

  -hide and then paint with a blending mode

  -paint directly with a blending mode

  -setting and each color separately masking

  -with a soft brush to paint the areas - but I still have a mixture

  If someone has encountered similar tutorials with distinct colors such as these with the help of a double exposure do not hesitate to pass it on. I searched high and low for something similar to ensure I have acceptable knowledge in double exposure and selections of color, but no dice.

  Thank you!

  

  Put all images on different layers and set the blending mode of all, but the wallpaper. Then, for each layer, go to the channels Panel and fill in the colors you want no black.

  

  In this screenshot, layer 1 is a copy of your image, I made three copies and then as I've described.

• visible slides behind the other slides

  Hello

  I had some problems for a while now with Captivate 6, when I recorded a demo and when reading it through F12 or after publication, I am faced with a kind of double exposure, where I can see parts of a previous slide and the current slide parts.

  I tried to clear the cache, close the program and restart and it is always the case.  The problem is that this is not the case all the time.  However he has spent too much time on this project that I am pulling out my hair with it.

  I also had the 'hidden' text boxes appear where they should not be during playback.  First of all, they shouldn't be on this slide, and secondly, the tip Action hasn't called yet lol.

  Any help would be appreciated, please see the image below.

  

  Hello

  Make sure that the full version of Captivate should be 6.0.1.240 or 6.1.0.319 (help > about adobe captivate)

  Click a slide in the film and change the quality of the blade to 24 bits or optimized, then do so for each slide.

  Then click on edit > Preferences > SWF size and quality > be of custom and uncheck compress SWF file and disable the advanced file compression.

  Then re publish once again and the release check "Force republish all slides.

  Thank you.

• EasySign: what I can or cannot change the fields to fill?

  Is it just me, or is Acrobat EchoSign a hostile user to the garbage piece? I use reader 10.1.3. This is a form that I would complete and perhaps 'sign' with a TIFF of my signature, but first I have to type in some areas. Arrived at this point took me 20 minutes this morning:

  

  (Sorry for the fur JPEG;) Forums Adobe informed me passively after that I tried to save three no-anti-aliasing 'content types' that he would only accept JPEG format.)

  If you examine the name under the section 'INFO' field, you will see three blue spots reflecting three multiple selections no region of text boxes in the list to the right. These objects are the result of my patiently left click the i-beam on my name in order to change the text that I entered in each field. Whenever I did, I would like to briefly see a blip appear under the i-beam, but he would not let me change my text. The blip, of course, was a text box of length zero being created. I persisted because at some point given, I swear I saw an arrow icon and it let me do a selection in blue on a parcel of my text, but then for some reason any when I typed nothing happened, then the apparition disappeared and I couldn't repeat it. And it is only after a few minutes, when I started to play with a right click on a text field, I discovered the "list of comments" so needless of me in frustration.

  There are now dozens of these mini boxes everywhere in the sheet (just look at how the "list of comments" has 86 entries instead of the 12 that actually contain text). But it means I can't change something when I finished a text, isn't it? If so, why not? Why is he not clear for me, a sophisticated user? Why the bizarre and unpredictable behavior? Or I'm a sort of silly, not having found the correct incantation? Maybe an Adobe firewing priestly programmers or myriads now will enlighten us all, tacitly suggesting that it's just my stupidity, because they knew the blessed Secret their first time.

  I have fairly exhaustive sought a solution to this and have so far found nothing, but maybe it's because I've budgeted only 45 minutes for this potential simple task. Am I'll have to check out this file in Illustrator, or print it out and post it?

  Twenty years ago, I was probably the first or second person outside mountain view to show the alpha of the carousel. Since that time - and despite having occupied hope repeatedly - I still can't easily fill a document online without heartache. Why can't I edit a field? What I have to do when I want to edit a multi-line field? My workaround over the years have range from every possible thing you can imagine, the scan in Photoshop or Illustrator, Quark or InDesign; in the fields of the blind and double-exposures on a printer laser. the glue; even to hack the fields the PostScript with setfonts and the movetos shows.

  I spent 40 years in the graphic arts; half of them I've struggled with Acrobat, on some products work quite complex with the features of questionable when delivery shoehorned in PDF format. When it comes to simple single-page monochrome form letter/A4 - the portable document more abundant on earth - we are now in Acrobat v10 and all I want to do is easily a form, sign and return by email and I still can't.

  Why is life so much harder now than when I could run that through a typewriter, Adobe? What you really do about it for billions? How much more precious moments of our lives that you're going to waste?

  (P.S. What difference is almost a day: hours after this - and just before submitting this article - I myself have discovered the cast with a few minutes more far experiments most already spent. Now, I can recreate the arrow and change the field. It's really not hard, but it's far from clear is the furthest thing of the good technique of the user interface. However, I know now the blessed Secret, or at least a part of it. But it does not change my position above. You can guess why, O Adobe priesthood of unbearable preachy? If it takes a programmer experienced hours to learn the combination, what makes you think to Grandma and Grandpa never go figure?)

  I have to say that a large part of the problem is due to the agency providing the form. This would have worked much better if they had taken the time to add real interactive form fields so that you wouldn't have to worry about the typewriter tool. It's actually good that Adobe provides that as an option of last resort for PDF files that look like forms. It of a little silly to provide a PDF of a form and makes it not to fill, especially since it's possible since Acrobat/Reader 3. This particular form would be easy to implement with fields.

  Regarding the file TIFF is not not qualify, it is worth looking at in more. Consider filing a bug report.

• How to cancel automatic exposure in develop module?  [double wire: locked]

  How to cancel automatic exposure develop module adjustments?

  duplicate thread: How to use auto exposure to develop the module automatically

• Extremely frustrating mouse double click when you use the docking station?

  I have a mobile workstation 15 zbook and love it.  I have a docking station at work and even from one station to the House.

  When I plug the docking to the mouse House will be double-click whenever I have one click.  Simple click, I have to quickly move out of the object or it clicks double in each time.   I tried a new mouse, to reduce the speed of double click and is NOT the case on my docking station at work or when the laptop computer use with the mouse connected locally.

  It of extremely frustrating and makes working at home a pain rather than productive.

  You ask if anyone has seen elsewhere, or have any suggestions?

  Hello @romatlo,

  I read your post about how how your laptop will be double-click everything you click once when it is attached to your docking station, and I would be happy to guide you to a resolution!

  I'm sorry, but to get your question more exposure, I suggest posting in the trade forums, since it is a commercial product. You can do it:

  http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/BD-p/BSC-274

  I hope this helps!

  Concerning