Double track

Similar Questions

• Redflagging spots of different time in a double track to record via the hearing

  I would really appreciate if you could help me. I have a record to double track. I'd be able to redflag point A in the left channel and point A' in the right channel? Hearing would be able to tell me precisely the difference in time between these two positions? Would I be able to put several redflags in the left channel and the corresponding number of redflags in the right channel? Hearing would be able to tell me each lag in each corresponding pair of redflags? "For example, the difference between A and A', B and B', C and C ' etc. If so, how should I proceed?

  I'm trying to use this feature to measure the large ear-voice of simultaneous interpreters. The left channel would contain the original, while the right channel contains the translated version. That's why I need to frequently different redflag in both channels.

  Thank you very much for you help anything that might offer.

  In the marker list (you can dock a pane next to the main editing window if you want to - which makes it easier to get to), highlight the two references you want to the Group (Ctrl-click selects more than one), and then in tools in the lower left corner, click the one-fifth of the six - this is the tool "merge selected." Timing results will be immediately displayed in the list, with the two markings showing now a unique range benchmark.

  For example, if you select 1 and 3 and combined marks, you would still have cue 2 left you could bundle it with 4. That would give you two marker ranges overlapping that, if you marked, you can refer to each side of the audio.

• Double track scanning with the help of Deskjet 3520

  Hi all

  I just bought an all-in-one Deskjet 3520 Pinter.  Far so good except that I can't figure out how to scan multiple pages into 1 PDF document.  I found a guide who said there was a button to add pages on the left side of the screen preview of the scan, but it doesn't seem to be there!

  I am running Windows XP.  And help greatly appreciated

  Scanning from the printer should actually encourage not to all other pages...

  Scanning multiple pages can be done via the software itself.

  Open the printer software, or scanning HP and then scan a Document or Photo.

  Select PDF, check the resolution is 300 dpi or less and preview it is checked, and then click Scan.

  change pages, and then click the Plus sign button to scan additional pages.

  Once you're done save the analytical work and it must be registered on a single PDF file.

  Shlomi

• Takes are silent when copied and pasted into the new track

  After recording several takes of a vocal part and a model gliding around how I like it, I decided to dub the voices and use another part of the (unused) takes.

  I created a new title in doubles (CMD - D) and pasted the vocal track (including), but the new double track is silent.  I can see the track and everything going out there and tried to remove plugins, copy and paste in different ways, but the track and just stay silent.  I can see them all here in the new track, and all that I can see, they should be heard.

  I tried this search anywhere online and cannot find any mention of this problem anywhere.  Is this just a bug?  I forgot something?

  What version of logic you use.

  It worked well here with 10.2.4

  Also how do you 'stick it '?

  After a screen capture of your page to organize with open mixer

• Is it possible after duplication of tracks to merge automatically?

  After duplication and slide on a track I always have to pick up the pieces, and then move the duplicate above so that it matches the original in piano roll. Is there a way in a double track to get automatically merge in time with the original? There is always a gap between the original and the copy, and I have to manually move the notes in piano mode so that it matches the original. Even if make a loop by dragging the region there is a space between the original and the copy. For me is not really a loop if there is a break between the original and the loop before it repeats. Thanks in advance for your help. I have searched but can't find the answer I was looking for.

  The notes should be moved is continuous.

  

• Scan of the file: path/data not in the format specified in double

  Can you get it someone please let me know why it does not work?

  It's just a piece of sample code, to write data in a txt file and then read it.

  First, if a file already exists when I want to write in it and I chose 'Replace the file', he says stop and double track.

  Second, if I write a new file, it says: error 85: Scan failed. The input string does not contain data in the expected format.

  Attachment VI.

  EDIT: see post.

  Just for reference, I solved it by using the match VI pattern in a loop and then using the table of indexes for individual values.

• problem syncing iPod touch with iTunes

  Hi, I had a problem syncing my iPod touch with iTunes. I get a message indicating that there is not enough free space to hold items in the iTunes library, which indicates that I need about 43 GB.

  I tried to take as much data on my laptop thinking it would make more space available to my iTunes library which is held on my laptop.

  I had a problem some time with the storage of data files and program files. I divide the hard drive and I have a Macintosh HD 2, but also a main drive of the HD. I find that I have an iTunes library in two HD players, so I think I have a duplicate library.

  My iTunes app shows that I have a size of music library of-33,40 GB containing elements of 6940. My iPod touch has 6920 songs and 33 videos, 15 photos, 14 applications. The ability of the iPod touch is 56.4 GB, with 2.8 GB available.

  If the problem is the duplication of library, can I remove in double track of the HD2, and how to change tp parameters to stop duplication.

  Duplication of audio content seems to be a concern for you. If you have a desktop Mac, open iTunes/library/display the duplicate items. You can view and edit tracks easily.

  If you do not have a Mac desktop computer, the question is a bit tricky; There is no way to detect mp3 duplicates except manually.

  The good news is that the majority of your data bloat is likely to be in the 33 videos. I could most of the videos of archives and see what happens. (I have banned all THE videos of my iPod Touch and I couldn't believe how much I got space).

• Unlock editing Audio and Audio for a movie

  Hi all

  Looking for help here. Try to change some audio of a movie in Garage band V.10.1 - how unlock the audio so that you can cut and paste the track?

  Thanks in advance for your help, Joe

  

  You cannot change the sound track directly.  Create a new track and copy and paste the audio region of the audio track with this new track. There, you can edit the audio clip.

  For example:

  

  I created a new audio track of basis in the title menu, then held down ⌥ key options all by dragging the soundtrack in an audio region for the new track. The copy of the double track is unlocked.

• Need help with iTunes duplicate Applescript.

  Hello

  I found this script that works great with iTunes automatically duplicates deleting. Something that I had wanted for a long time.

  I use Lion with the older version of ITunes, so I really need this script to work.

  It is an import script that helps me sync my music library to my home office with my nightclub iTunes library.   The only problem I have with this script is that it does not keep this last recorded double track.  I want to keep the last tracks because sometimes I replace a track with a better record of video or audio clip.  I would like to change this script to just base duplicates on the artist, Album artist, and name.   I hope that someone with apple great capabilities of script can check the script and help me adjust.  I tried to contact Randolf who created the script, but he did not.   Here is his magnificent scenario.   I'm sure that many people will find this useful.   I hope someone can help me.  I am very limited in my applescripting.

  -Ron

  _______________________________________________________________________________'

  Remove the Script duplicates ITunes

  (*

  This small script detects and removes duplicates in your iTunes library. Two tracks are considered duplicates if they share the same name of the track, the artist and the title of the album. If these 3 fields are the same, all the tracks except for one can be deleted. In addition, the game account and group entries are "merged."

  You can also use the account manager to remove duplicates in any other selection as the main library.

  You can enable or disable the registry deleted. Logging goes to the "logFile.txt" in your home folder.

  Any comment to

  Gmail.com

  *)

  property doLogging: false

  textlog property: missing value

  performance {}

  Tell application "iTunes" to the value plList library playlist 1

  hand (plList)

  end of race

  on hand (plList)

  -set up the recorder

  the value textlog makeFileLog (((chemin d'accès àle dossier de base) as String) & "logFile.txt")

  If doLogging logImportant then textlog ("start remove duplicates...")

  findDuplicates (plList)

  If doLogging logImportant then textlog ("completed the removal of duplicates...")

  end main

  on findDuplicates (plList)

  Tell application "iTunes".

  -find all artists

  the value artistList to the artist for each track of plList which the artist no lack of value

  Set actArtList to {}

  Repeat with an artistList in

  otherwise (actArtList contains (an AsString)) then copy (a string) to end of actArtList

  end repeat

  -find all the albums of a given artist

  Repeat with an actArtList in

  the value albList (album the album and each track of plList which the artist is a missing value)

  Set actAlbList to {}

  Repeat with al in albList

  If not (contains the actAlbList (al AsString)) then copy (al AsString) at the end of actAlbList

  end repeat

  -find all the titles with the artist one and al album

  Repeat with al in actAlbList

  the trList value (each track name of plList which the artist is an album is al and name no lack of value)

  Set actTrList to {}

  Repeat with tr in trList

  If not (contains the actTrList (tr AsString)) then copy (tr AsString) at the end of actTrList

  end repeat

  -manage these tracks

  Repeat with tr in actTrList

  the tracksWithThisComb value (all tracks of plList which the artist is an album is al and name is tr)

  If tracksWithThisComb > 1 then length

  My mergeTracks (tracksWithThisComb)

  Repeat with i of 2 all tracksWithThisComb

  the value of t to the point i of tracksWithThisComb

  If doLogging then

  the value of str (tr & "-" & al & "-" & a)

  Comment by TextLog ("Remove" & str)

  end if

  remove the t

  end repeat

  end if

  end repeat

  end repeat

  end repeat

  tell the end

  end findDuplicates

  on mergeTracks (possDupl)

  Tell application "iTunes".

  Set arrive in section 1 of the possDupl

  played playCount value number to arrive

  the grOfTrack group value to arrive

  "the gr value.

  the value compOfTrack compilation to arrive

  the value of comp «»

  -collect all of the information would

  Repeat with i of 2 all possDupl

  value tr to the point i of possDupl

  value played trPlCount number of tr

  If trPlCount > playCount then set playCount on trPlCount

  If (grOfTrack is equal to "") then

  the value trGroup grouping of tr

  If not (trGroup is equal to "") then the value gr trGroup

  end if

  If (compOfTrack is equal to "") then

  the value trComp compilation of tr

  otherwise (trComp is equal to "") then the comp trComp value

  end if

  end repeat

  game played count to arrive at playCount

  If (grOfTrack is equal to "") then set grouping of arrive in gr

  If (compOfTrack is equal to "") then set compilation to arrive in comp

  tell the end

  end mergeTracks

  on makeFileLog (\\server\share\file_path)

  script FileLog

  Category: "log file".

  property _linefeed: 10 characters id

  -Written records messages in a file encoded in UTF8 text

  on logMessage (the_text)

  the value of f to open for access file_path with write permission

  Try

  write (the_text & my _linefeed) f from folklore as 'class utf8 '.

  on error error_message number error_number

  Close access f

  error error_message number error_number

  try to end

  Close access f

  end logMessage

  on logImportant (the_text)

  logMessage ("*" & the_text & "*")

  end logImportant

  end of script

  end makeFileLog

  iMac, Mac OS X (10.7.3)

  < personal information under the direction of the host >

  iMac, Mac OS X (10.7.3), null

  Please... y at - there anyone out there that can help me?

  Ron

• iTunes fails a few pieces of cd import

  I'm putting a 7 - cd audiobook on my ipod touch via itunes.  Then I import the disks in a new playlist in itunes.  I used the button name identification information and number of my disks, which worked well.  But when I look at my playlist, I noticed that many of my discs start with track 3, 5, etc.  What I have to start over or can I import only the missing pieces.  And why did this happen?  Thanks in advance for any help.

  I tried to re - import one of the disks that worked, and then deleting the double tracks.  It's tedious, but it worked.  Then I tried importing only the piece missing from a different drive, stop importing after I get the green check mark.  That did not work.  Is there an easier way?

• W530 RAM Flex Mode?

  Hello

  I think of evolution my w530 of 2 x 4 GB RAM at 3x4Go. Anyone know if the version of hearts of media w530 flex mode? Also if run 2 sticks in double track and tracks the third single channel, are there so many performance hit as with 3 sticks running in a channel?

  Data sheet:

  2 x 4 GB will work to 1x4Go single channel and dual channel. My advice: get 2 x 4 GB, so you have 4x4GB.

• Open/create and write to multiple files

  I'm doing data acquisition high speed and save data in the file.  I will acquire a large amount of data, so save in one file would result in my file to jump in size.  This is why I would like to save my data in several files.  I'm trying to figure out how to open several files, then choose which of the file to write to.  My approach is to open/create multiple files and save their refnum into an array.  Then I would choose what file to write from this array.  I enclose my VI, everything I have so far.  It seems to me to get errors, the "Double-track" or "input parameter is not valid. For example if the input is a path, the path can contain a character not allowed by the operating system such as? or @. "How could start with this problem?

  Figured it out...

  Sorry for the inconvenience!

• Adding RAM to HP Touchsmart laptop 14-b109wm (REF E0X70UA)

  Hello!

  I need to update my RAM on my HP Touchsmart laptop 14-b109wm.  I'm on a virtual OS on my laptop via Hyper-V. In doing so, I'm running out of RAM available. I find myself trying constantly to adjust the amount of RAM in my virtual Session. I think that the ultimate solution is to upgrade the RAM.

  Currently, my laptop has 4 GB of RAM installed, provided with the laptop.  My questions are; the laptop comes preinstalled with one or two modules? Should what modules I buy to get a maximum of 8 GB installed? How to install the RAM modules in this laptop model?

  Thank you in advance.

  Rich

  RichFla wrote:

  Hello!

  I need to update my RAM on my HP Touchsmart laptop 14-b109wm.  I'm on a virtual OS on my laptop via Hyper-V. In doing so, I'm running out of RAM available. I find myself trying constantly to adjust the amount of RAM in my virtual Session. I think that the ultimate solution is to upgrade the RAM.

  Currently, my laptop has 4 GB of RAM installed, provided with the laptop.  My questions are; the laptop comes preinstalled with one or two modules? Should what modules I buy to get a maximum of 8 GB installed? How to install the RAM modules in this laptop model?

  Thank you in advance.

  Rich

  Hi RichFla

  It's your product user guide. Here is your product specifications.  It's your place of originprodut.

  You can upgrade up to 8 GB maximum. There are 2 slots available to customers & you can buy an identical plus 4 GB of RAM to upgrade both can act as configuration double track for better performance.

  Regarding the frequency of the RAM, the user guide gives no reliable information for Celeron processors. In order to better you find system through BIOS setup Diagnostics soon after off the laptop.

  See Page 66 Chapter 5 removal and replacement of the procedures of the user guide & you can see that, for installation of memory you need to remove the motherboard of the system. It's better to give you the nearest service center HP for the upgrade because they have all the necessary tools.

  Thank you

  Visruth

• UCS environment vSphere 5.1 upgrade to vSphere 6 with Nexus 1000v

  Hi, I've faced trying to get the help of TAC and internet research on the way to upgrade to our UCS environment, and as a last thought resort, I would try a post on the forum.

  My environment is an environment of UCS chassis with double tracking, tissue of interconnections, years 1110 with pair HA of 1000v 5.1 running vsphere.  We have updated all our equipment (blades, series C and UCS Manager) for the supported versions of the firmware by CISCO for vSphere 6.

  We have even upgraded our Nexus 1000v 5.2 (1) SV3(1.5a) which is a support for vSphere version 6.

  To save us some treatment and cost of issuing permits and on our previous vcenter server performance was lacking and unreliable, I looked at the virtual migration on the vCenter 6 appliance.  There is nowhere where I can find information which advises on how to begin the process of upgrading VMWare on NGC when the 1000v is incorporated.  I would have thought that it is a virtual machine if you have all of your improved versions to support versions for 6 veil smooth.

  A response I got from TAC was that we had to move all of our VM on a standard switch to improve the vCenter, but given we are already on a supported the 1000v for vSphere version 6 that he left me confused, nor that I would get the opportunity to rework our environment being a hospital with this kind of downtime and outage windows for more than 200 machines.

  Can provide some tips, or anyone else has tried a similar upgrade path?

  Greetings.

  It seems that you have already upgraded your components N1k (are VEM upgraded to match?).

  Are your questions more info on how you upgrade/migration to a vcenter server to another?

  If you import your vcenter database to your new vcenter, it shouldn't have a lot of waste of time, as the VSM/VEM will always see the vcenter and N1k dVS.  If you change the vcenter server name/IP, but import the old vcenter DB, there are a few steps, you will need to ensure that the connection of VSM SVS corresponds to the new IP address in vcenter.

  If you try to create a new additional vcenter in parallel, then you will have problems of downtime as the name of port-profiles/network programming the guestVMs currently have will lose their 'support' info if you attempt to migrate, because you to NIC dVS standard or generic before the hosts for the new vcenter.

  If you are already on vcenter 6, I believe you can vmotion from one host to another and more profile vswitch/dVS/port used.

  Really need more detail on how to migrate from a vcenter for the VCA 6.0.

  Thank you

  Kirk...

• MGCP Gateway help

  I have a site where they treat employees, from a point of view finance, as 2 companies.  For this reason, they had all their calls out different broken / taken while they can charge just every "company" on their part.  The last time that I am there I met a dealer and one of its engineers to voice said I could do this by creating 2 different MGCP gateways for the single router.  There may have been something that I missed in translation (Japanese), but I can't figure out how to make a second MGCP gateway for this router.

  Any ideas?

  Create a different set of CSS, partitions, drive from the bosses. Assign the new CSS for other users with access to the scores of new models in double track are assigned to and pointing to the ports dedicated the bridge.

  Chris

  Sent by Cisco Support technique iPhone App