Downgraded from VISTA to XP and RECOVERY no LONGER WORKS

Similar Questions

• Downgraded from Vista to XP and unrecognized sound card

  Any help would be appreciated. I spent from Vista to XP and now there is no sound, no sound card is recognized, and I download all drivers imaginable to try to get her recognized map and sound working again.

  Does anyone else have this problem?

  Vista seemed to slow down, and that's why I went back to XP. I don't really want reinstall using Vista if I can avoid it.

  Thank you.

  
  

• Downgraded from Vista to XP BUT AUDIO does NOT WORK!

  Hello ~!

  I have a HP Pavilion dv6500 laptop with an AMD processor. Recently, I got drowngraded of Windows Vista to XP by following the guide on this site, but not install the audio drivers (Conexant High Definition Audio Driver) and so I have no sound. It says "ERROR - Driver Installation Failed: could not be found for this driver MEDIA." The same for the Modem driver and the MS - SAU (I tried first by following the instructions). What should I do to fix this? =(

  You use the part 2 of the Guide Downgrade XP drivers? Did you install Conexant using Device Manager as described?

• After downgrade from Vista to XP, laptop camera is not working

  my laptop computer camera failed when trying to communicate with Skype.

  * original title - one VISTA and down the slope to XP my laptop camera is not working *.

  Hi maiwashie,

  You may need to update the drivers for your camera after decommissioning. Read the following article about the drivers for XP:

  http://www.Microsoft.com/windowsxp/using/helpandsupport/learnmore/finddrivers.mspx

  I hope this helps!

• Rescue and recovery no longer works

  I've been successfully using R & R to create weekly backups on my X-1 carbon (Win7, 64-bit Home Premium). However, when I tried to run yesterday, it wouldn't start - start for rescue & 4.5 screen recovery (which in the Task Manager reports as a program called display) stays on my screen indefinitely.

  Is it possible that I can diagnose what's wrong with it, or restore a previous version of R & R?

  (1) try to install RNR 4.52.005 for windows 7.

  (2) install visual C++ x 64 2010.

  (3) you must manually download 4.52 lenovo.com RNR. SU will not update.

  (4) how long have you been on win7? 64 bit?

• HP DV5 - 1235dx Downgrade from Vista to Windows XP start up problem

  Hi, I tried to downgrade from vista to XP and restarting the laptop after copying all the files from the XP CD, appears "Error loading operating system".

  After that I tried to restart my laptop and it freezes at the first screen which appears 'HP, press ESC to load BIOS' and I couldn t be able to access the BIOS.

  I Don t know what I can do! Please I need help.

  I tested my laptop computer with another HD and started normally but when I put my HD didn t do anything. I think the BIOS that my HD had a problem so I can´t use it.

  The specifications of my laptop are:

  Product number NB163UA #ABA

  Microprocessor 2.00 GHz Intel Core 2 Duo Processor T6400

  Microprocessor Cache 2 MB L2 Cache

  Memory 4096 MB

  Memory max 8192 MB

  Video Graphics Intel Graphics Media Accelerator 4500MHD

  Video memory Up to 1759 MB

  Hard drive 320 GB (5400 RPM) Western Digital (I bought a new)

  Multimedia player LightScribe SuperMulti 8 X DVD±R/RW with Double Layer Support

  Display screen 15.4 "diagonal WXGA high-definition HP BrightView Widescreen (1280 x 800) screen

  Fax/Modem Modem 56 k high speed

  Network card Integrated 10/100 Ethernet LAN

  Wireless connectivity

  • 802. 11 b / g WLAN

  Sound Altec Lansing speakers

  Keyboard 101-key compatible

  Pointing device Press the button with On / Off button and dedicated vertical scroll up/down pad

  PC Card Slots 1 ExpressCard/54 Card Slot (also supports ExpressCard/34)

  External ports

  • 5-in-1 Integrated Digital Media Reader for cards Secure Digital, MultiMedia Card, Memory Stick, Memory Stick Pro, or xD Picture Card
  • 4 universal Serial Bus (USB) 2.0, 4th port shared with eSATA
  • 2 headphone
  • 1 microphone input
  • HDMI
  • 1 VGA (15-pin)
  • eSATA + USB 2.0
  • 1 RJ-11 (modem)
  • 1 RJ - 45 (LAN)
  • expansion port for computer 1 cell 3
  • 1 consumer IR (remote receiver)

  Size 14,05 "(L) x 10.2" (D) x 1.37 "(min H) / 1.65" (maximum H)

  Weight 5.83Ibs

  Security

  • Location of Kensington MicroSaver lock
  • Turn on the password
  • Accepts 3rd party locking safety devices
  Power
  • 65W AC adapter
  • 12-cell Lithium-Ion battery

  What is in the box of

  HP Mobile remote control
  
  HP Webcam with integrated microphone

  Hi Daniel,.

  I tested my HARD drive in the other laptop and it starts normally, I did format and then I put in my laptop. I tried to install XP and everything was successful. I could install XP. I am very happy and I did not buy a new HARD drive.

  You are awesome!

  My problem was solved!

• Downgrade from Vista to XP [DV2740SE]

  Hi all. I do a downgrade from Vista to XP and I can not foud the drivers.

  Can someone help me plese?

  THX.

  This Conexant posted to Skydrive is the same as the file Mediafire post by Mariza... which is, btw, his own personal discovery and seems better to work for a microphone. Get it if you have problems to Mediafire, like that sometimes.

  I think that Mariza said the Install.exe can be executed from it rather than having to use the Device Manager.

  http://CID-3f10d7c1771f7efe.SkyDrive.live.com/self.aspx/public/Conexant%20High%20Definition%20SmartAudio%20221.rar

• Downgrading from Vista to Windows XP Home in Satellite P200-16 b

  Hi people!

  I wonder if someone has already tried to downgrade from Windows Vista to Windows XP. I have a Satellite P200-16 b.
  I was check in the support Web site and I found most of the pilots it but I think not all.

  Please post your comments here.
  Thank you
  E

  Hello

  I used the search option and found many threads on the downgrade from Vista to XP on Satellite P200 PSPB0E

  All Toshiba drivers are published on the European driver Toshiba page.
  Of course, you won't find additional software and programs like WinDVD, etc. insofar as these software are only a part of the Toshiba recovery image and as I guess are not to free them.

  An important note; you need to install XP drivers as mentioned in the installation instructions txt file. This doc is also found on the Toshiba driver page!

  Then you should not get any trouble of installation.

  Best regards and happy new year 2008 :D

• Satellite U400 - Downgrade from Vista to XP

  Hello guys,.

  I recently bought a laptop Toshiba Satellite U400/03 s with a pre-installed version of Vista business & do not like. It came with a recovery disk for Windows XP Pro product. This confused me a bit. Can I downgrade Vista Business with XP Pro?

  My next question is, if I can downgrade to XP Pro I need registry XP with Mircosoft?

  Also, if I do not need to register with Mircosoft XP, where can I get the registration key of?

  Greatly forward a response.

  Thank you very much.

  Normand

  Hello

  A downgrade from Vista to XP is possible. Why not?
  But as far as I know, so you need to reinstall the full specifications but in my opinion, this isn't a problem because you have the XP Recovery disk. Just boot from it and follow the instructions on the screen.

  But before that, you you should burn the Windows Vista recovery disk. How do you know this? You need to start only the Toshiba recovery disc creator and you need a blank DVD. Then the Vista recovery disk will be created, and if you want new Vista, you must start only on this disc. That s all because it contains the settings factory and if all the drivers and tools of Toshiba.

  If you have installed XP you must register it on Microsoft. It is not necessary.
  AFAIK, you must enter a product key. It of already on the recovery disk.

  Welcome them

• Need help with this problem without downgrading from Vista to XP pro.

  OK so I have a problem, but it is in a common category, it is a rare problem as given that everywhere I look I can't seem to find someone who has the same problem.

  Question #1: Heres Alright so my question downgrade from vista 64 bit of the month last to XP pro SP2... Well, I'm going through the process of installation very well, wipe the hard drive, make new partion (or how ever spell you it) etc. It starts the formatting, and it installs everything seems to be fine. Now when it comes to the reboot screen it counts down it restarts correctly now, this is where the problem occurs. During the restart of the process rather than continue through the installation process which should be, where it says "Press any key to boot from the CD" soon after that instead of going into the installation process it says "disc read error" or something of the sort just underneath. Help, please!

  Question #2 also now that I re installed vista I did all good also, erased the hard disk (even I tried to install XP on) just to make sure they had no data on this. Well now, during startup it asks if I want "a previous version of windows" or "Windows XP" as if I double started somehow. Vista loads still very well when I choose it however. If I managed to do an install own success of XP it should fix right?

  Thanks again.

  Hi Kevin112,

  Thanks for posting. Follow these steps on your XP disk.

  1. place your Windows XP installation CD and start to her...
  2. Press any button to start the Windows installation (don't worry... we do not actually use the installer at this point)
  3. wait a few moments for the installation program starts, when you see repair an installation of Windows XP using the Recovery Console, and then press the R key
  4. wait until you see this screen, enter the number of your master installation. (Typically 1 to C:\Windows)
  5. press ENTER.
  6. If you are prompted to do so, enter your administrator password. If you don't have one, leave the field blank and press to enter.
  7. from the command prompt, type: chkdsk/r (note the space between chkdsk and / r)
  Allow it to complete undisturbed.
  8. remove the disc, then restart.

  After completing this, then format it and try to reinstall XP again. As for your other question if completely format you your drive using XP you should not see the previous version of XP. The only reason you would see that it's the Vista BCD is located on a second hard drive in your computer. If this is the case and you want to do an install own format two readers please.

  I hope this helps! Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• x 200 Wireless does not work after downgrading from Vista to XP - please advise

  Information system: x 200 74553YG / Windows Vista business product key

  Question: Used the recovery CD to downgrade from Vista to XP - downloaded all the drivers and updates to the operating system. everything worked except LAN wireless. Tried all possible ways to solve this problem (re download drivers)

  Your support and recommendation are highly appreciated

  so, there is no unknown device in the list? go into your bios and see if the wireless is turned on there or not.

• Satellite L350-170 - downgrade from Vista to XP

  Laptop: Satellite L350-170
  Part No.: PSLD8E

  Heya I write about the downgrade from Vista to XP.

  I play world of warcraft online game, I think that my laptop is good enough to run it, but I get little FPS (Frames Per Second) I do belive Vista drains your computer and is no friendly case like performance than XP. I have Vista Home Premium, I was trolling internet reading how to etc... Some forums said that some manufacturers of computer/laptop can provide a Vista 2 XP disks. I was wondering does toshiba? If this is not the case, how it would be difficult to downgrade from Vista? Is there a risk of bricking my laptop? could u do a list of things that I would need and a guide step by step on how downgrade but remembering I'm not a computer very know how nobody so keep it very basic =)
  Also - what is void your warranty? I would be able to send my laptop for toshiba and they do?

  Take advantage of my wall of text
  Thanks in advance for the help
  * fruitsalad *.

  Hello!

  Downgrade from Vista to XP isn't very difficult and it should be possible that you can do yourself.

  You need at least one drive in Microsoft Windows XP with SP2. Boot from it and follow the instructions on the screen. But you need the SATA drivers, the computer can recognize the HARD drive. For drivers, you need Intel Storage Manager, which can be downloaded on the site of Toshiba and this is workaround step by step how to do this:
  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

  If you have installed XP, you must install all the drivers and tools for this. All what you need you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• Error message appears during the downgrade from Vista to XP

  I'm trying the last days to downgrade from vista to xp.
  Whe I try to do a clean installation Ikeep error 0x0000007b (0xF7A8A524, 0xC0000034, 0x00000000, 0x00000000).

  I also tried through the back (which I am not good at) repeat me something on the partion, which it is not.
  When I go through the windows if it says that the version is newer than the one you want to install.

  Hello

  If you want to use the Win XP instead of Vista, then you must do a clean install!
  The downgrade will not work because Vista is newer than XP.

  I put t know what laptop you have, but most of the new laptops support a SATA HDD controller and you must include the SATA drivers to install Win XP.

  In addition SATA drivers are a part of the Intel Storage Manager which should be published on the Toshiba page as well.

  Just a hint; Use the option search advanced this Toshiba forum there are a lot of discussions about this theme!

• Satellite A200-1NB: Question about downgrade from Vista to XP

  I bought a 1NB A200 and I intend to downgrade from Vista to XP.
  I would like to create a CD of tools and utilities, but do I need to do before the low grade or can I do after?

  Also, I have to change the BIOS for XP before you install on the system or install XP first and then modify the BIOS for XP after installation?

  Thanks for your help.

  *@Brown*

  Hello

  If possible, try to update the BIOS first, and then reinstall the operating system.

  I think you also need download all drivers Toshiba XP before installing XP on this OS. Without the LAN or WLan you will not be able to connect to internet ;)

  Good bye

• Satellite L300 PSLB8A - cannot locate the WLan adapter after downgrading from Vista to XP

  Model - L300 Satellite PSLB8A-01F004
  Australian model
  Place of residence current UK

  Happy new year to you all. I have a problem with the adapter wireless following a downgrade from Vista to XP Pro home. Device Manager indicates that a network adapter, which is the LAN and it does not work properly.

  I have two points with one exception - Ethernet controller and Modem on Bus High Definition Audio device.

  I find all the major engines of the Toshiba Australia but he lists three (I think) site possible WLAN - Atheros, RealTek, and one of the other manufacturers.

  I tried all three without success but am willing to acknowledge that I can have a mistake, perhaps by installing all three drivers at the same time for example.

  The indicator on the front of the box portable wireless lights on or off with the hard switch setting.

  I am also unable to locate the display of all available wireless netrworks, this can be a symptom of the driver is not installed.

  I tried to locate the wireless card, but it doesn't seem to be accessible through the background panels, including the Panel of RAM module.

  Any ideas please?

  > I have two Articles with one exception - Ethernet controller and Modem on Bus High Definition Audio device.

  The Ethernet controller is the WLAN adapter.
  I guess that the WLan driver is missing and so the wireless network card does not appear under network adapters

  Please check this Toshiba How TO:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=78

  This will help you find the right WLan driver for this chip.
  and here you can find the drivers:
  http://APS2.toshiba-tro.de/WLAN/

  good luck and good news 2011 ;)