Download after restoration

Similar Questions

• updates downloaded after restoring to a point of control-main issues

  I was told to post here for a response:

  restored to a control point. was having bad to hang on to a router. could not "Uninstall" so I restored.
  After vista came back, I downloaded updates. one was a CIP service.
  He doesn't have the first two times, then took. given market according to the instructions.
  computer turned on and acted like it was scanning or something. the black screen, white letters. then he stopped on a 'file ':! Oxc01a001d! 37482/98395 (\registry\machine\components\deriveddata...).
  stuck there for more than an hour. I pushed the button to close hard. computer is relit and recommended a system restore. I said yes, and the same thing happened. stuck on the 'message' above.
  help please. (I have Vista Home Premium 64)

  update this morning: turn off the computer this morning and turned back on - now, after 3 hours of what he's trying to "Startup Repair", it is always taken in some kind of loop. He said: it's tempting to repairs. I did not change but for the black screen.

  all the answers?

  You say that the last problem is that the power has been cut to 1/2 way when trying to load the files to use the Startup Repair disk.

  You have caused a failure of hardware in your computer by a power failure to him.

  About the State of the disk, you're here!
  We cannot see the disk, or judge what condition it is in...

  My advice is to contact the manufacturer of your computer, if under warranty.

  If it is under warranty, contact a local and trusted computer repair shop; NOT a great string of repair shops.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  You can try an installation clean back to factory settings before proceeding with what precedes, but we do not know if it will work.

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their way of doing recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  See you soon... Mick Murphy - Microsoft partner

• ITUNES WON'T DOWNLOAD AFTER RESTORE LAPTOP!

  I restored my computer I did several times in the past, since that, I try to download itunes but it keeps freezing... I looked on the internet and was told to remove the temporary files, which I can't do as its saying already open in another program, this is not the case, as I closed all the programs that are running... need help please, I can't be without my music

  Download gel or installing the program freezes?

  Did you use the OEM recovery to factory defaults, or did you do it from a backup, or maybe you have a DVD retail that you used?

  If it is a download problem try this thread and look for anything that might be interesting to try, some of the custom of applicable suggestions, but some.

  Unable to connect to specific sites & programs
  http://social.answers.Microsoft.com/forums/en-us/w7programs/thread/ed21eb64-71dB-44a5-9c75-b36108183bd3

  If it is an installation problem, try right-clicking on any downloaded .exe and selecting the option 'run as administrator '.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  First try checking not be (read-only) to see if it reports any problems file or hard drive.  If this is the case, start by checking the two boxes, in no other rerun.

• How to download after a restore of the computer

  Geek team had to restore my laptop after a repair due to a corrupted file linked to google that would not let me connect to the internet. They said that I can go to my adobe account and the restoration of photoshop and the room light but can not find how to download or restore

  Please see the link below for the installation.

  Download and install Adobe Creative Cloud apps

  Hope this will help you.

  Kind regards

  Hervé Khare

• After restoring the PC to factory settings because of the Trojan horse, unable to perform desk top applications (bad parameter).

  Windows XP in desktop HP 4 years.  After restoring to the original due to trojan settings, downloaded all the XP updates.  Applications always on the C:\ drive.  When to open the control panel: open / remove programs, none of these applications are displayed.  Program listed as "all users" in the icon property.

  After recovery, you must reinstall all of the programs that were previously installed using the original media.

  A recovery takes the computer to the settings at the start of the computer was first. Even if you have backed up your data, you will need to reinstall the programs such as the tax on the Turbo, Registry Mechanic.

  You will also need to install service packs and Windows updates your recovery CD unless has service pack included.

  Thank you

  Marilyn

• After restoring the factory network card settings will not start

  I have toshiba L300 satt he wouldn't start so after restore settings factory network card does not start so can't do updates cannot find wireless network and I tried plugging cable ethernet directly to the router still cannot be detected or nothing comes with the network adapter won't start not error code 10 tried to load the driver updates but it's so far has got no restore point or restore system disks completely made through bak right discso to normal, says its running vista 32 2006 windows looked everywhere no joy please don't help the driver is realtek rtl8101

  Hello

  go to toshiba and download the drivers for your model laptop

  There is a download tab at the top on the link below

  use the computer that you use to get here download and save to the desktop

  copy to a flash drive - transfer and install it on the other

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

• Unable to connect after restoring my computer

  Original title:

  Paul

  Why my tom tom used to connect after restoring my computer

  Hi Paul,.

  How do you try to download the drivers for your TomTom? He comes from a Web site?

  I suggest you run the peripheral hardware troubleshooter in Windows 7.

  You can see the help article following Microsoft on how to run the tool for troubleshooting hardware and devices:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  You can also make reference to article Microsoft help at the following address:

  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

  Try the above steps and get back to us.

  Thank you

• After erasing the iphone 6 will be triggering after restoration of restrictions?

  After erasing the iPhone 6 will be triggering after restoration of restrictions?

  Until you restore as new and does not use a backup which contained the restriction code, Yes, it will be gone.

• the "Show all downloads" button shows only a download after it's over

  In Firefox, the 'Show all downloads' button shows only a download after it's over. It is similarly of the dialogue download library. Downloads occur, but you do not see the status until it is complete. It started yesterday, using Firefox 27. I upgraded to 28.0 but it still happens. I have also reset Firefox, nothing happens. I am running Windows 7.

  The answer was... Conduit search malaware himself had installed on my PC. Uninstalling it solved the problem.

• I lose my apps apple makes such as numbers, pages, imovie, garageband etc after restoring backup from my iphone recently brought 6 s

  I lose my apps apple makes such as numbers, pages, imovie, garageband etc after restoring backup from my iphone recently brought 6 s why? I just brought a new phone and restore from backup, but after the restoration of my new devices I don't see it.and I pick up on the app store and its application to pay... its happened... there please help me anyone... Thanks in advance

  new phone iphone 6s 128 GB

  iOS 9.2.3

  Are you logged in using the same as before Apple ID? Under the "iTunes and App Store", you can check in the settings menu.

• iPhone 6 requesting an unknown Apple ID after restoring with itunes

  Hello. Then my sister bought this iPhone unused 6: 6-7 months ago. It was working properly until she changed the password and forgot it, we had to restore the iPhone via itunes 6. After restoring it, however, now upon activation it asks one Apple that wasn't a set - up on the phone ID. I am really frustrated because Apple ID it, she is supposed to be the first and the only one that was linked to this phone. But is not this user name. What is going on?

  She bought a phone that has not been released to find my iPhone. Only the person who configured iCloud on this phone can unlock. There is no way around that. See: disable find them my iPhone Activation Lock - Apple Support

• Weird Time Machine question after restoration

  Hi all

  First post here so go easy on me

  I'll try and make this as brief as possible.

  I've been running an iMac 27 "2010 end (still running Lion 10.7.5, but it is stable so I have not found the need to modernize) and NAS from Synology DS212j with TB 2 * 3 disks for the last 3 years. I've set up time service Machine through DSM on the Synology with a quota of 1 200 GB for my iMac which worked perfectly while all the time, during which I restored the weird file without problem.

  Recently, for a number of reasons, I felt the need to update the OS of El Capitan to provide specific features that only there, so I made sure that my last backup was not serious and went through the upgrade process. It took a while but seems fine, but in the end, I became artifacts of the screen during the exchange between the office computers and for the worse, completely locked Mail machine as soon as you have clicked on an email. A lot of research on Google and all the patches applied but no joy, I decided to restore Lion and watch a clean install of El Crappo thereafter.

  At through the process of full restoration without problem and he has restored from the DS212j without a single question (took about 14 hours but again, it worked) and my Mac was back as if nothing ever happened. Happy days!

  Shortly after that, although the problem started with Time Machine backups do not tell me that there is not enough space on the destination to save my machine...

  1. I look into my quota on the NAS (the bit you set to ensure that backups are not the entire disk) and it tells me that there are 820 used GB which I guess is my backups Time Machine original that nothing should have changed on the NAS.

  2. I don't seem to be able to see the Time Capsule shared queue Station disk even after display in shared folders, it should he appear?

  3. I unhid it and he could ride through cmd & k and using smb / / nom_lecteur/Time Capsule so I can now see the volume in the Finder.

  4. I can see there are 2 * sparsebundle files, one for my iMac and the other for Macbook Air my wife. The file for mine displays a last updated date/time of a few minutes ago, but no size of file. The woman shows well, last time/date and file size (he stayed very well throughout this btw).

  5. when I enter Time Machine on the iMac all my historical incremental backups have disappeared and the only backup who shows also available is the date to which I restored from, nothing before and obviously nothing after because there is no space.

  I have not a clue what going on here, but it seems to me like it after restoring my sparsebundle file (which is always on the NAS and must be intact) is there, but for some reason the iMac cannot see/index / register or see one of the backups that are contained in.

  Apple support tried to help but actually said that they don't support anything other than an official time Capsule and Synology must implement the Time Machine in a different way because he could not find the sparesebundle file, only the tf volume content when it is mounted by trying to start the backup.  From what I read and checked the forums of Synology and the sheets, they don't do anything outside the norm with regard to the Time Machine application, it's literally just a network volume that stores the sparesebundle in the same Apple so designed, then why on Earth after restoring my iMac do not see the content of this sparsebundle file , and why it consumes disk space?

  So, what I'm looking for help, is this (or questions):

  A. How do I look inside the time Capsule (this is what I call the Time Machine shared disk) to see how many files is there and if there is a GB 820 that contains all the data from my legacy?

  B. someone at - it an idea how the iMac see and recognize the original file should be here?

  C. If I were to remove the rare bundle that I peut see, will that potentially be old and will be that free space that is held open and allow me to perform a full backup from scratch?

  D. If C is not the original file remains hidden, no idea how I can find...?

  E. do I have other options that you can think of...?

  Sorry, that was supposed to be brief, but I wanted to make sure I had all the info there to allow people to understand what has happened and what I did to try to resolve so far.

  Thanks in advance

  See you soon

  Mark

  Mark, in my opinion, your questions can be answered by the great Pondini http://pondini.org/TM/FAQ.html

• I can't set it up as a new iphone after restor

  

  I can't configure my iphone after restor

  Find your Apple (the one that starts with the letter "and is a Gmail address) ID.  Enter the password for that Apple ID.  That will remove the activation lock and allow you to activate your iPhone.

• If I didn't save my iphone, is there a way I can get my data after restore?

  If I didn't save my iphone, is there a way I can get my data after restore?

  Unfortunately, no.

• iCloud problem after restore

  Hello

  I have problem after restoring my iphone 6

  1 or 2 weeks ago, I put my apple with this id * but ID not enable find my iphone, this time, my ios is 8.4.

  before that I didn't put everything on icloud my iphone apple ID 6.

  before restoring already disconnected my id not turn find my iphone

  I don't have any on my icloud iphone apple ID before the restoration, I restore my iphone after restoring my iphone need to active of the apple ID, but not my apple ID.

  the active apple ID my iphone [email protected] .it's not my apple ID, I don't have any apple with yahoo mail ID.

  Several months ago I restore my iphone with ios 8.1.2 after many months restoring at 8.4 and have no problem with icloud

  Apple please solve my problem

  Thank you.

  You bought the used phone? If so, you should contact the seller to sign out of their Apple ID.