Download Canon P215 scanner Driver problem

Similar Questions

• Scanner driver problems/communication HP Officejet 6310

  Background: buy new pc in 2006 (XP Pro)... Bought Officejet 6310 shortly after.  Installation of the software for printing (on the cd) was perfect and as directed.  Computer HP P7 portable bought in 2011, software downloaded from the HP website, installation was still perfect and according to the guidelines.

  This week, I upgraded the old pc from 2006 with new boards (re-used only the cases and the power supply).  Running Win 7 Pro 64-bit.  AIO_CDB_Net_Full_Win_WW_130_141 downloaded from HP, has begun to install.  Problem started when, during the installation process, I turned on the Officejet 6310 and plugged the USB cable as shown. The below screen appeared... not all devices have been installed.  He remained that way for several minutes... the photo below was my first indication something was wrong.

  

  After waiting for about 3 minutes, it appeared.

  

  Following the instructions, I unplugged and rebooted, uninstalled and reinstalled the software... I have downloaded and run the Print and Scan doctor... he could not solve the problem either ('Unable to communicate scanning pilot' was the last word of the doctor).  On my fifth attempt to re - install the software, I got this result.

  

  I sat and waited, and waited, and the software concluded that she had properly installed, even if the photo above also indicates.  At this point, I can print it, but it takes forever and hesitates when printing as if very little data is done by the intermediary.  If I try to use the scanner via the control center, I get the message not found 'HP imaging device.  Also, sometimes, my computer not turn off unless I turn the printer off (the "Shutting down" message remains on the screen until the printer is turned off).

  And this message was not present at the end of each attempt installation of the printer:

  

  Then... I followed all the instructions (I think), changed USB ports, tried the print and scan doctor... I don't know what else to do.  Been working with it for a day and a half and I'm out of ideas.

  Someone at - it suggestions?

  [Edited 14/07/12]

  One of my friends said that it might be that, since the printer is 6 years old, 64-bit operating system can cause problems and HP probably wouldn't need much resources, writing drivers for everything.  I hope that HP support for their products is better than that.  My Officejet 6310 is not ready to be retired!

  [Published 15/07/12]

  Stop the presses!  I'm a little red-faced now... at some point I have disabled Windows Update (I do not remember doing that, but anyway...) I saw that by accident, turned back on and installed the printer software.  I noticed that Windows Update several files and installation of the driver software window indicated that everything was successful.  BUT... I still have a problem with the scanner, but it's a different error... See the image below.

  

  I can print ok, I can copy ok, but I can't scan with the HP Solution Center or the physical button on the printer.  It is here where I am now.

  If you have spent any time trying to understand the first problem out, I apologize for my lapse in not ensuring that Windows Update has been enabled.  If anyone has any ideas on the situation as it is, please respond here.  Thank you all for research.

  I think I found the problem, although it seems so unlikely for me... I replaced the USB cable and installed the printer software and everything worked fine.  To prove that the cable was at fault, I close the printer down and installed the old cable... the State seemed yet, but when I launched a scan he loses communication before the scan is finished.  I turned off the printer and installed the USB cable replacement and performed the function of scan with no problems.  I repeated this scenario again with the same results... with the original cable (that came with the printer 6 years ago) I had communication errors at the beginning or after a scan.  Installing replacement cable took care of the problem every time.

  How can a cable go bad?  I don't understand this.  In any case, it seems to be fixed now... thanks to all that looked and perhaps thought about my problem.  I guess I'll leave the message here for reference.

• Scanner driver problem with - 8.1 to Windows and HP L7680 AIO

  Hey folk,

  I have a problem with my HP L7680 AIO.

  I did an upgrade to 8.1 Windows x 64

  I have install the driver real 14.8.0 version.

  The printer works but the scanner hurts.

  When I begin a scan I get an error message and the scanning process is cancelled.

  I have this error message with photoshop, HP solutions and any other scanner software.

  Printing HP and doctor Scan says I have to contact support.

  Here I am all idea?

  Either way, I disabled my Antivirus software during installation.

  Thank you very much.

  Greetings

  Markus

  Hello

  I solved the problem by myself.

  For people who have the same problems...

  It was the prevention of intrusions by more Portscanner antivirus.

  I could adopt new the situation with other systems, and this is the reason why I say that it was definitely the Portscanner.

  The fool is the AV-Suite of disabling showed no effect.

  Only after that I put the settings in the AV suite that IPS should not control the ports everthing works fine.

  Things difficult, but now it works...

  See you soon

  Markus

• Canon FB620U scanner driver needed

  Hello, I tried to make a cannon scanner FB620U to work in my computer which has windows 7 operating system, but I can't get the driver. Canon website says that the operating system will run but douesn does not happen. What can I do?

  It's not compatible win7

• Canon LiDE 700F scanner driver for OS10.11

  Since the El Capitan upgrade my Canon LiDE700f scanner is not recognized.

  I can't find a new driver for OS10.11 on Canon website.

  Any advice?

  Hi Alan_20,

  I understand that you are looking to get your Canon scanner to work with your Mac after upgrade to El Capitan. According to our records, there is software available for this device. It may help to check the software updates (via the Apple menu) before you connect your scanner.

  Look for software updates before connecting your printer or a scanner. This updates the list of the most recent supported on your Mac printer and scanner models. If you do not check the updates before trying to connect a new printer, you won't see the software available when you connect your device.

  Canon CanoScan LiDE 700F *.

  4.1.0a

  S

  Printer and scanner software available for download for your Mac
  https://support.Apple.com/en-us/HT201465

  If you are still unable to get your Mac to recognize your scanner, the next step would be to reset the printing of your Mac system.

  Mac OS X: how to reset the printing system
  https://support.Apple.com/en-us/HT201539

  See you soon!

• The scanner on my Lexmark X 2480 all-in-one does not work, is it a driver problem?

  Scanner on my all in one system will not work, all in a single system is a Lexmark X 2480 printer does not scan.

  Original title: driver problem

  Search for the latest drivers from the manufacturer's website.

  Support and downloads Lexmark
  http://support.Lexmark.com/index?locale=en&page=product&UserLocale=en_US&ProductCode=LEXMARK_X2480#1

  Is this the same driver problem also posted you on here ?

• HP officejet 9120 (all-in-one) does not No Scanner for driver problem.

   

  Mr. President is respected!

   

  I have a portable printer Hp officejet 9120 (all-in-one), but no scanner to work here for driver problem. I downloaded the driver from the Hp site, but not here.not updated driver does work on XP, win 7 please help me in this matter.

   

   

   

  Thank you

  (Munir Malik)

  Pakistan

  [email protected]

   

   

  Hello

  You might have more luck on the bussines forum, this is the forum of consumer and your unit is regarded as a bussiness unit, so bussiness forum could be a place where you get a better answer.
  Find it with the link below.

  http://h30499.www3.HP.com/

• How to download Canon imageCLASS MF8170c color driver for Windows 8.

  Title: Color Canon imageCLASS MF8170c
  Hello

  My Canon imageCLASS MF8170c color is not working with windows 8 to sit cannon. There is no driver for the OS Version you have selected. The driver can be included in your operating system, or you may not need to pilot. But I can't find the drive of windows 8 OS. What should I do?

  Mickzhang

  Hi Mickzhang,

  If I understand correctly you want to install the driver for Canon imageCLASS MF8170c color.

  You can download and install the driver for Canon imageCLASS MF8170c for Windows 8 from the link color. I'm sure this will help you to solve the problem.
  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/imageclass_series/color_imageclass_mf8170c#DriversAndSoftware

  Just reply to the State of the question.

• After the installation of El Capitan (Canon 4400F) scanner my driver fails

  After the installation of El Capitan (Canon 4400F) scanner my driver fails. Now it's a 6 lb paper weight. Tried to reinstall the Canon software and downlading new from Canon, but nothing.

  First contact Canon for a possible upgrade.

  Then try to use the printers and Scanners pane in the system preferences application to see if it will recognize your scanner. Many current scanners is recognized and you can scan with the application overview.

  If none of these help to look into Hamrick VueScan software. I use Vuewscan with my is further supported the scanner Nikon 4000ED.

  http://www.Hamrick.com

• DRIVER PROBLEM WITH CANON SMARTBASE PC1210D when INSTALLING ON WINDOWS 7 RC 64 - bit EDITION

  I RECENTLY INSTALLED WINDOWS 7 RC 64 bit EDITION, WORKS FINE BUT IT WONT LET ME INSTALL MY CANON PRINTER DRIVER SMARTBASE PC1210D I HAVE TRIED to INSTALL all THE DRIVER FROM THE CANON SITE, ALSO WINDOWS UPDATE cannot FIND ANY DRIVER.
  I ALSO INSTALLED THIS PRINTER ON ANOTHER PC WITH WINDOWS XP (IN NETWORK) IT WORKS FINE ON WINDOWS XP, IT SAME USED LET ME INSTALL AS A NETWORK PRINTER SHARE.
  ANY HELP WOULD BE APPERICATED
  Thank you

  http://social.technet.Microsoft.com/forums/en/category/w7itpro/

  Link above is for Windows 7 Forums.

  This is the place to ask your questions Windows 7 partners.

  The driver problem is not to do with Microsoft.

  CANON has written drivers for their products.

  If CANON does not write a driver for your model of printer for Windows 7, there's no.

  Try a Vista of CANON printer driver. If no available Vista printer, or it does not work, you are out of luck.

  And gently, do NOT enter capitals,

  Here is the Vista Forums.

  See you soon. Mick Murphy - Microsoft partner

• Windows 8 does not have a driver for a Canon 9950F scanner

  My Canon 9950 Scanner (Canoscan toolbox) worked on my XP and Vista OS, but there is no driver for my new system of Windows 8. Can anyone help?

  I hope this helps someone. I have a Dell XPS 8700 with 8.1 Win 64 bit on an SSD. As everyone knows the drivers Canon 9950f only go up to Win 7 64 bit. So I installed the twain driver for win 7 64 bit and the Canoscan for win 7 64 bit. I installed using the compatibility option. I rebooted and plugged my USB and it works! I love my 9950f and stressed it would not work on my new computer.

• Epson Event Manager cannot find the scanner driver. Epson said that the event handler is a windows thing, and so is the problem.

  I installed an Epson Stylus SX215. I can print, scan and copy if I use another way, but if I want to use the event handler it says that it cannot find the scanner driver may not use the event handler at all (cannot yet open the program).
  In addition, the scan option "attached to electronic mail" does nothing either. Don't know if this is because the event handler program or because he can not see e-mail programs I have.

  Hi bdelrio,

  Thanks for posting. Try running a System File Checker to find errors.

  Click Start.
  In the search box type cmd
  In the menu start right click on cmd.exe and select Run - As-Administrator.
  In the command prompt, type "sfc/scannow".
  Allow this to fill and run. Please let us know if this corrects and error, or if it reports errors, it cannot fix.

  Thank you! Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Scanner install problems - Windows 7 (64-bit)

  Recently upgraded to Windows 7 (64-bit) and everything was fine until I tried to replace my flat bed scanner and are now trying to get two scanners work. First scan was listed (as was the second on the compatibility Web site) Scanner Canon CanoScan LiDE200 USB. Went on Canon's site and downloaded the Win 7 scanner software and installed (after removing the previous version). Tried running the software and got a message "memory" and has been unable to act. Went to 'devices' and 'right click' the scanner and was able to scan using the windows software, so scan worked. Original printer took over and bought an Epson v30 scanner, same problem, installed new software (Epson Scan 3.04). Doulble click on the shortcut of Epson Scan, but nothing happens.
  A scanner does not and I think it's the materials, but both makes me think it might be something else, please notify

  If Irfanview doesn't mean that you are 'Twain' drivers are the problem.

  I have a Windows XP roceedure that usually fixes this kind of problem, but have yet to try it on Windows 7. I posted it below in case you are interested, but go forward with caustion. Note that some of the steps/information I already posted, but I'll post the procedure in his entirerty.

  ---------------------

  If you connected the printer multifunction/scanner to your PC and then
  installed the printer drivers/software, the chances are very high
  the printer can operate but function scanner will not.

  Most scanners or printers of multi use require
  that you install the software before connecting the scanner or printer/scanner.

  Step by step instructions:
  (1) unplug the MFP or scanner.
  (2) uninstall the printer/scanner software and two pilots to help
  the Add/Remove Programs option.
  (3) look/search folders associated with your printer/scanner model
  contains "Twain" files, if the files still exist after uninstalling.
  Delete these files and related files.

  Note: In the list of files that is found you can ignore everything
  files listed in:
  C:\Windows
  C:\Windows\system32\...
  C:\Windows\ServicePackFiles\...

  NOTE: In the C:\WINDOWS\twain_32 folder: you have
  one or more files. The one of "do not delete" is called: wiatwain.ds
  (wiatwain.ds is installed by Windows XP)
  All files in this folder were likely created when you
  installed the printer/scanner. Check each of the files 'Properties' and if has the
  brand of your scanner (Epson, Canon, HP, etc.), identified as the
  company/brand, these files can be deleted safely.

  On my PC I have my scanner HP twain file located in:
  C:\Program Hewlett-Packard\Precisionscan Pro 3.1\TwainCtrl.ocx
  There should be something similar on your PC, so in my case at least
  I would like to uninstall the software of Scanner HP and if it ' file TwainCtrl.ocx
  is still there after you have uninstalled the scanner software I would delete it.
  I have also a second that the file named "Twain_32.dll" TWAIN located:
  C:\Program Files\Adaptec\Easy CD Creator 5\PhotoRelay

  (4) check the Device Manager and remove all the entries if necessary.
  (5) create a Restore Point
  (6) analysis the registry using the name of brand/make of the scanner as a keyword for
  image search. (Remove all entries are, but make sure it's a connected scanner entry)
  7-restart the PC and check once more the Device Manager.
  It should not show any announces the printer/scanner.
  (8) now reinstall the software and two pilots.
  (9) shut down the PC.
  (10) the PC power turned off, connect the printer/scanner, then
  restart / Windows startup.

  Note: Sometimes there might help you try a different USB port if you
  printer/scanner is a USB device.

  An easy way to test your installation of the twain driver software work, s
  is to use a graphical editor named IrfanView.
  http://www.IrfanView.com/

  If you download, install and run this software,
  located in the menu bar is an option named "file".
  By selecting the 'File' option, you should find a
  (near the bottom of the list) option for named:
  'Select the TWAIN Source', click this option
  and then a popup should display valid Twain sources
  for scanner you. If you see your scanner from the list,
  Select it, and then try to scan an object (picture).

  By selecting the Twain Source in the file menu IrfanView should load
  your scanner software and then scan.

  If you choose the option "Copy Shop" also in the file menu you have the
  possibility to bypass your scanner software and directly scan a photo in
  IrfanView. Try the option "Copy Shop" and let me know what happens.
  Note that "Copy Shop" list of your Photo editing/scanning scanner
  software and hardware name (make and model) of your scanner when
  you click on the button "Select Twain Source" of the photocopy shop.
  You should choose the scanner hardware option.

  For example, on my PC the software Photo retouching/scanner is named:
  «HP Precisionscan Pro 3.1 "»
  The second entry "Twain list select the Source" Copy Shop is my scanner
  brand / model that shows that:
  "WIA-HP Scanjet 5470 C 1.0"

  So for me when you use Copy Shop, I select the second entry when
  prompt to select the Twain Source.
  I then check the 'Twain with the preview.
  (I mark this option if the scanned image does not directly)
  to the printer, but on the contrary is displayed in IrfanView).
  Then I click on the button 'start' location has the lower part of the photocopy shop
  window to start the search.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• address book deleted virus blocked access hotmail no Windows Update could not download the antivirus scanner

  OS Windows XP Anti virus Windows Defender attack 10/12/2011 Date. Started getting error messages telling me I had problems with memory and hard drive. I was responsible for carrying out the difficulty system for repair charges. Display shows failed to load segment, critical error of hard disk, hard drive damaged clusters, weak and delayed by ram reliability covered clerical errors screen. Update to Windows defender and attempted to update to Windows XP. Impossible to update despite following the instructions shown.

  Hello

  1. what tool to fix system did you run in order to solve the problem?

  2. what exactly happens when you try to run Windows Update?

  3. you receive an error message when you try to run Windows Update?

  4 you did changes to the computer before the show?

  5. have you tried to download Microsoft Safety Scanner?

  Method 1:

  Step 1:

  You can try the steps of troubleshooting provided in the link below to fix problem with Windows update in Windows XP.

  Cannot install Windows updates

  http://support.Microsoft.com/kb/555461

  Step 2:

  Reset the Windows Update components

  http://support.Microsoft.com/kb/971058

  Method 2:

  For the question with HDD, you try performing the control and verification of the disk if the problem persists.

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Note:

  Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

  Method 3:

  In case you haven't tried download Microsoft Safety Scanner, then try to download Microsoft Safety Scanner and perform a full scan of the system and check if the problem is caused by a Virus/Malware.

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note:

  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• Windows 7 64 bit will be hired not my Canon MF 5770 driver

  I try to install my Canon multifunction MF 5770 on my new Dell Latitude E5500 computer that works with Windows 7 64 bit operating system.

  I tried the driver on the Canon Web site, downloaded to my hard drive and it not compressed to a folder.

  When I connect the MF 5770 via USB it tries to find the driver and do not recognize the driver on my local computer and suggests to find the driver online. I searched it online again and returned to the Canon Web site and download another copy of the driver. Window still does not recognize the new driver.

  I tried the manually to add the printer via hdwwiz and navigate to the folder where the driver is stored. The installation in this folder information files are only 3 KB, 20KO and 3 KB for printer, scanner and fax, respectively. I tried to install the drviers and get the error message: error 0 x 00000002 "printer driver was not installed.

  Help, please.

  Have you followed the steps that have been described during the installation?

  Before you start installing the driver, connect only the LAN cable first, don't connect not the USB at the moment. This is necessary for your printer to acquire automatically IP address before starting the installation of the driver and activate the function of the driver installation. Driver and application software files have been compressed. The following instructions show you how to download the compressed files and unzip them. 1. connect the printer to your network using the LAN cable. (If applicable) 2. to download files, click [I Agree-Begin Download] icon, select [Save] and specify the directory where you want to save the file. Click [Save] to start the download of the file. 3. downloaded are saved in the folder specified in a self-extracting form (.exe format). 4. double-click on the file to decompress them. A new folder will be created in the same folder. New folder has the same name with the unzipped file. 5. install the printer driver according to 'Readme.txt' stored in the folder. 6. after have installed the drivers, plugged in the USB cable to the printer. (if necessary)
  Don