Download helper has stopped working and I'm already under FireFox 35.0

Similar Questions

• Download helper has stopped working on youtube today 08/08/2014

  Add on download helper has stopped working on you tube - was working fine then stopped gray became colored icon.

  And for the Mac, what other solution?

• Adobe Download Manager has stopped working. This is the message I get

  I still use google chrome with my Windows Vista PC. Usually plugin chrome automatically updates the latest version of adobe flash player. Sites, I will say that I have to update and head for the download of adobe. I deselect Mccaffee and then try to download. I have to Save it and then click on run, etc., but the installation stops with a message that "Adobe Download Manager has stopped working" and then another message "I want to report to Microsoft", etc..

  I have

  tried several times to install but I can't. I called Microsoft and they offered the Adobe phone number. (I always use my webrootsecure but I disabled it once to see if it would help the download/install new update of adobe Flash Player, but that did not work either) I don't have all the cover or subscription from Microsoft at the moment, btw.

  (I even know the category in which post this question)

  If Chrome Support/updates being arrested was not involved in your original question of Flash Player, that's what I would have advised you to do.

  Download and run the Flash Player uninstaller program.

  http://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Windows.html

  Then download and install Flash Player; After unchecking installing Chrome and Google toolbar option:

  http://get.Adobe.com/flashplayer/?promoid=BUIGP

  If the problem persists, you may want to ask in the Forums of community Flash Player:

  http://forums.Adobe.com/community/flashplayer

  See you soon.

• Why my 8 Adobe has stopped working and I am unable to download the latest updates?

  My 8 Adobe has stop working and now I am unable to open everything about Adobe. I tried to update to the latest cersion, but don't succeed.

  The most recent version is Adobe reader X (10)

  I do as suggested by Azam and uninstall the previous version. Have you tried a system restore to an earlier date and then tried to uninstall. If you click on "help" in the toolbar of the Adobe Reader there may be an option "repair Adobe installation".

  You could also try to reinstall Reader 8 and try once again an uninstall.

  If all else fails I try and install Reader X in any case if you have a corrupted version of the 8

• New Photoshop CC 2015 crashes when opening: I've just updated to 2015 for CC. The program seems to open, but in a few seconds, I get a message telling me it has stopped working and closes. Help please!

  I just updated to 2015 for CC in Photoshop.

  The program seems to open, but in a few seconds, I get a message telling me it has stopped working and closes.

  Help please!

  If you use Windows comp, you can check below links:

  https://forums.Adobe.com/thread/1864032

  https://forums.Adobe.com/thread/1881048

• Installer of Modules of Windows has stopped working and was closed

  Hello
  I have a laptop Toshiba Satellite (running Vista Home Premium) that I bought about two months ago.  When he tries to run updates, he routinely gets through a few and then up pops the message "Windows Modules Installer has stopped working and was closed."  I have already reinstalled Windows Updates and Microsoft Updates, nothing helps.  Recently, she was immobilized on the KB958623 update, so I tried to install that separately, but the same message popped up and it did not work.
  Help?
  Thank you!

  Greetings mollypopsicle,

  I see that we have always had problems with this update.  This leaves me with the question about the possibility of fi computer update auto is damaged during download.

  I would like to have you create a folder on your desktop.  Right-click on an empty spot on the desktop / new / file - name of the folder KB958623.

  If you have a download manager, please use it to download the KB958623 update from this Web site

  http://catalog.update.Microsoft.com/v7/site/search.aspx?q=958623%20

  Make sure you use the version of Windows Vista that applies to your system.

  Once the download is complete and before running the update

  1. Restart your system in safe mode with networking, as described in the above post from Brian.
  2. Once the system is booted in safe mode with network, run the update from the file that is downloaded on.
  3. If this does not properly complete, were there a pop-up Windows indicating that an error?  If so, what were these errors?
  4. Maybe it's that the error you receive is that this update does not apply to your system.  If so, this update can be hidden in your list of updates.

  Here is a link on how to hide the update

  http://windowshelp.Microsoft.com/Windows/en-us/help/5a319824-5cb5-493d-9151-9a97d0f565b61033.mspx#EZH

  Select only the I'm getting offered an update from Windows that I don't want.

  However, before you do, check which version of Windows Vista is ran - home edition, Premium, Ultimate, it is 32-bit or 64-bit edition.  Also, if there is an error of execution of this manual update mode safe mode with networking, include this information in the forum.

  Thank you and continue to keep us informed of the State of this update.

  Best regards

  Debbie Microsoft Support Engineer answers visit our Forum of Microsoft answers Feedback and let us know what you think.

• Desktop Window Manager has stopped working and was closed

  One of our machines (HP Pavilion dv7 Notebook PC running Windows Vista x 64) will receive the error "Desktop Window Manager has stopped working and was closed" with lots of close error. He reappears (as well as all windows flasher to non-aero, then back to aero) in a few minutes, spends about 5 times per hour.

  I did some research on this and have already taken the following measures without a bit of luck:

  1 run the command chkdsk / SFC scan - nothing found via chkdsk, SFC found some issues fixed, and some, it did not set. Them that it solves not all related to Windows Sidebar, which I do not / does not start.

  2. put updated drivers for ATI Radeon 3200HD - this had a lot of new questions. Installing caused newer drivers ATI catalyst to no longer work with errors during installation and popup errors at startup. After trying several solutions workaround to try to get installed it, I ended up coming back to the driver that came with the laptop, that are properly installed and working without error. I am skeptical of update of this stable driver as a solution to the dwm.exe error.

  3. this problem just started yesterday, that occur with not a lot of changes. Other than updates of windows (I think that .NET framework and a few other updates installed), I replaced NOD32 antivirus with Bitdefender antivirus. The system was stable with bitdefender for about 2 weeks, so I'm not convinced that this program is causing the error.

  4. the event viewer shows the following:

  Failing application Dwm.exe, version 6.0.6002.18005, time stamp 0x49e02696, failed module ntdll.dll, version 6.0.6002.18881, time stamp 0x51da3d16, exception code 0 x 80000003, offset 0x00000000000461f0, process id 0 x 124 error, start the application time 0x01cea0365a457adc.

  Offset, process id and start on time all vary, but there are a lot of these application errors in the viewer all screaming Dwm.exe like the failing application.

  What should be my next course of action?

  You do not receive an error but a caveat. NTStatus results (the set of codes execption used by ntdll - the failed module) begin to 0 for no error, 4 for information (you should never see this), 8 for putting guard and C for error.

  It's your specific error.

  //
  MessageId: STATUS_BREAKPOINT
  //
  MessageText:
  //
  EXCEPTION {}
  Breakpoint
  A breakpoint has been reached.
  //
  #define STATUS_BREAKPOINT ((NTSTATUS) 0x80000003L) / / winnt

  Problem is, you shouldn't have breakpoints. Breakpoints are set by debuggers and stop the execution of the program to the State of the program can be examined. There should be no breakpoints in a retail system. More breakpoints are inserted into memory during execution of the program in a debugger. They tend not to do in the actual file.

  So here are two assumptions, either you have no exit code, IE test code (driver?). Or you have a running program that behaves like a debugger (which is suspect).

  Each of the three towers of programs, services, and drivers in increasing amounts. So restrict the possible culprits.

  Clean boot

  Click Start - all programs - Accessories - run and type

   

  msconfig
  

   

  Then go to the Startup tab uncheck everything. Then go to the Services tab check hide all Microsoft Services and uncheck everything that is left.

   

  Reset. If this resolves your wake problem ½ of services / of startup items until you find that one.

  
  Tip clean boot

  If the above does not help.

  Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx

  Start the program by right-clicking and choosing run as administrator and click on the menu Options - Filter Options and check hide Microsoft entries and disable include the empty slots. Uncheck the box just to the left.

  Reset. If this resolves your wake problem half of the items until you find the one that.

  Safe mode

  If the above does not help.

  Click Start - all programs - Accessories - run and type
   

  msconfig
  

   
  Go to the Startup tab, and then click Start. Reset. Come back here and uncheck the box secure start to return to normal mode.

• NService Application has stopped working and was closed to popup on the desktop, when I first boot my computer.

  Original title: NService Application has stopped working and was closed

  Recently, I see this popup on the desktop when I start my computer first – 'NService Application has stopped working and has been closed. "

  What is - this and why I am see?

  Thank you!

  Hi Lee,.

  1. have you made a recent software or hardware changes to the system?

  2. is your system connected to a domain?

  Nservice.exe seems to belong to IBM Lotus Notes / / Domino from IBM.

  Method 1:

  If you use applications such as Lotus, then you can try to uninstall and reinstall to fix the problem.

  Note: Make sure that you have the CD or downloaded installation files to reinstall the program.

  For more information, see the articles:

  Uninstall or change a program

  Install a program

  Method 2:

  Otherwise, you can perform a clean boot and check if that helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: Make sure that you put the computer to a Normal startup once you have completed troubleshooting.

• I got this error message "winrscmde has stopped working and was closed".

  ERROR WINRSCMDE

  I got this error message "winrscmde has stopped working and was closed".

  Program WINDOWS SECURITY ESSENTIALS download, which found the horse of TROJAN ALUERON in my system. Also, he explains that he keeps duplicating itself and the only way to get rid of it is to download WINDOWS DEFENDER on a CD/DVD or the key to a processor that has the same operating system as the infected CPU offline. I want to know if this Trojan horse attaches to the BIOS? Please tell me the other options...

  Thank you

  Bruce

  Hi Bruce,.
  Your computer is still infected by malicious software. Try the sequence of steps 1 and 2 in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guide/
  It provides simple instructions on how to remove malware from a computer. If you have any questions, just ask. I hope this helps you.
  Brian

• I was doing a pop-up error box that says: Winrscmde has stopped working and was closed.

  Original title: Winrscmde error message

  I was doing a pop-up error box that says: Winrscmde has stopped working and was closed.  A problem caused the application to stop working correctly windows will notify you if a solution is available.  How can I stop this, I don't know what is Winrscmde or what it does?

  Hello
   
  1. do you have this pop-up at starup?
  2 have you made any changes to the computer before the show?
  Winrscmde errors are usually due to the corruption of registry files.
  Method 1:
  
  Put the computer in a clean boot state, see if that helps.
  How to solve the problem by running the clean boot in Windows Vista:
  http://support.Microsoft.com/kb/929135
  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.
  Method 2: Run the checker system (SFC) scan files and check if it helps.
  How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista: http://support.microsoft.com/kb/929833
  Method 3:
  
  I suggest you make a system full scan just to be sure.
  Here is a link that will give you information on how to perform a full scan of the system:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest anti-malware
  definitions, download and run the Microsoft Safety Scanner again.
   
   
  , Note 1: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• I get a message saying that Windows Explorer has stopped working and when I restart it pop again.

  Hi I have windows vista basic and it worked very well until yestaday and I got a message saying windows Explorer has stopped working and when I click on restart 3 seconds later, he appears once again?

  original title: Windows Vista Basic worked fine until yesterday and now I get messages saying that Windows Explorer has stopped working.
  Hello

  Use the startup clean and other methods to try to determine the cause of and eliminate
  the questions.

  ---------------------------------------------------------------

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Windows Vista. Setup.exe has stopped working and I can't get the program to load.

  I have a Gateway laptop with Windows Vista.  I put Norton anti-virus on it last year.  Now I am trying to run the new disk of Norton and the computer tells me that setup.exe has stopped working and I can't run the program. Norton 2008 has been removed.

  http://Service1.Symantec.com/support/tsgeninfo.nsf/docid/2005033108162039

  Download/run their abovelink Norton Uninstall tool to ensure that all "Norton" is deleted.

  Then, right-click on the setup.exe Norton > run as admin.

  If the above does not help:

  http://www.Symantec.com/en/AU/Norton/support/index.jsp

  Contact the Norton Support for problems with their software.

  See you soon. Mick Murphy - Microsoft partner

• Display multiple instances of NTDVM. EXE running in Task Manager and get error ntvdm.exe has stopped working and was closed

  There is also another problem of ntdvm that I meet where the file ntdvm.exe continues to the multiple (i.e. numeorus ntdvm.exe files are running in the Task Manager) to the point where my computer slows down and ends by crashes.

  Very grateful for any solution for every problem!

  I am running vista.

  * original title - ntvdm.exe has stopped working and was closed...?  Recurring problem! *

  Hello

  1. don't you make changes to the computer before that happened?

  2. Once you get this error message?

  I suggest you to try the steps below and check if it helps.

  Method 1: Try scanner SFC [SFC system] on the computer that would be a system file corrupt on the computer search and replace.

  http://support.Microsoft.com/kb/929833

  Method 2:

   Also try to set up your computer in a clean boot state, and check if the same issue occurs.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 3:

  Try to scan your hard disk from the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Hope this information is useful.

• Skype has stopped working and windows is looking for a solution.

  original title: problem with Skype

  I have been using Skype on my laptop for 12 months with no problems, all of a sudden, I get a message that Skype has stopped working and windows is looking for a solution.  I checked my firewall, windows updates and downloaded Direct X, as suggested by Skype. I've uninstalled Skype and downloaded again to make sure that the version lasted. IHAVE had also my whole system recharged but it did not work. I am at a loss to know what to do next. Someone at - it ideas

  Hello
  
  It is a possibility that a third-party application is causing the conflict with Skype. We can perform the clean boot troubleshooting and check which program is causing the conflict.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Trend Micro Internet Security has stopped working and was closed

  Original title: manages all components of Trend Micro, __Internet security. has stopped working and has been __closed. __

  Have you tried to disable my windows firewall and am always get error message (manages all components of Tred Micro Internet security has stopped working and was closed)

  Hello

  You should check with the support of TrendMicro.

  Frankly it seems to ask a lot of questions, so I remove it and replace it with other more
  compatible methods. To uninstall it, and then use the removal tool from
  TrendMicro.

  TrendMicro - removal tools
  http://eSupport.trendmicro.com/pages/how-do-I-remove-old-or-new-versions-of-trend-micro-products-in-my-comp.aspx

  How can I uninstall my Trend Micro program removal tools fail?
  http://eSupport.trendmicro.com/pages/how-do-I-uninstall-my-trend-micro-home-and-Home-Office-program-if-the.aspx

  ------------------------------

  Here's what I use and recommend: (these are all free and very effective versions.)

  Avast and Prevx proved extremely reliable and compatible with all I have
  launched on them. Microsoft Security Essentials and Prevx have also proven to be very
  reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

  Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
  Operation of the network.

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (It may temporarily turn off with the little icon to the left of the + bottom
  right of IE)

  Two versions of Avast are available 5.x and 4.8 x

  Avast - home - free - 5.x stop shields you do not use (except files, Web, network, &)
  Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
  Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
  Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
  disabled - click OK
  http://www.avast.com/free-antivirus-download

  Avast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
  and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
  Finish those you don't use).
  http://www.avast.com/free-antivirus-download#TAB4

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
  or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
  would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
  (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
  never find anything of note that I started to use this configuration.

  http://www.Malwarebytes.org/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.