Download profiles of correction lenses not referenced in Lightroom for PC?

Similar Questions

• Profile of correction does not account for Sony brand

  Profile correction automatically recognizes some make Hasselblad. My pictures are taken with Sony Nex - 5R. If I manually select "Sony E' that make LR recognizes the lens properly. Is it possible to fix this or is it a bug? Found a topic on the forum of the year 2007, but there is no solution (at least at the time).

  Thank you

  I found a few examples of raw images NEX - 5R at PhotographyBlog.com and has tested them with PS - CC / ACR 8.4.1.

  There is a purpose built, but only for Chromatic Aberration profile, so the external profile that you see when you select Sony E to do may indeed be correct, but so is the profile of Hasselblad, because it gives a nearly identical correction, with slightly more vignetting correction flashes in the corners, even if in the example below there is the flash fall It is difficult to say which version of the correction of vignetting is more correct.

  Hasselblad detected using Auto as the correction of the goal of installation, as well as the ToolTip describing the embedded profile:

  

  Profile of Sony E detected using as the default setup of the lens correction after having been defined as default profile:

  

  The raw image came from here:

  http://www.PhotographyBlog.com/reviews/sony_nex_5r_review/sample_images/

  So my interpretation of the behavior of LR, based on this one objective I found samples with Hasselblad profiles are correct for your camera, but if you set the Sony E profiles using the default lens profile process, described above, the corrections will be also correct.  Without knowing if Sony made Hasselblad lenses or Hasselblad makes Sony E lenses, and without knowing if their electronics is the same, it is difficult to know if LR is something wrong to recognize the Sony E lenses like Hasselblad objectives.

  Don't you see the same corrections for your lenses you opt for Hasselblad or Sony E?

• Support for profile lens corrections are not not in Lightroom 3.2

  I installed the Lightroom 3.2 update, which includes the list of support for the 'Canon EF 50mm f/1.8 II' lens.  I pulled a number of pictures with this lens (using a Canon T1i) and load them into Lightroom.  In the metadata for the photos, the lens was called "EF50mm f/1.8 II.

  Within the "Lens Corrections" section of Lightroom, the option 'Auto' reports "Could not find a profile matching automatically."  I tried manually to the list of Canon lenses, and it is not on the list.

  In the folder
  / Library/Application Support/Adobe/CameraRaw/LensProfiles/1.0/Canon/
  I see a file corresponding to this objective
  Canon EOS 5 d Mark II (Canon EF 50mm f1.8 II) - RAW.lcp
  but it is not with only one specific body.
  I tried to manually install the update to Camera Raw 6.2, but he noted "update is not applicable."  Given the above file, I suspect that it was already installed.
  In the release notes, which entered the Canon EF 50 mm f/1.8 II lens, it does not mention that the support was limited to only a certain camera body.  Could someone help me please?  Thank you!

  http://forums.Adobe.com/message/3105679#3105679

• What should I remove adobe cs3 to enable enforcement creative cloud to download and work correctly or not?

  I currently have indesign cs3, do I have to remove this application to download the creative cloud app?

  CC No. doesn't care for legacy versions and they can co-exist.

  Mylenium

• Edit images do not recharge in Lightroom after Photoshop

  A recent issue, which is really hindering my work flow. Images do not reappear in Lightroom for additional editing - but there is when I look at the file in Explorer. Any suggestions why it doesn't work anymore?

  Hi rachelm,

  Do I know what version of Photoshop and Lightroom are you using?

  This problem can be solved by resetting the preferences for Photoshop and Lightroom.

  * back up your catalog in Lightroom and Photoshop settings before you reset

  Refer to retrieve the catalog and images after the reset of the preferences and

  How to remove/reset the Photoshop preferences

  Concerning

  Assani

• I trashed my mimetypes.rdf file to restore stocks of download, and now Firefox will not open because profile missing, please notify

  Until very recently, when I want to download a pdf file, it will open automatically, and recently, for some reason, it stopped automatically opening and just downloaded on my desktop where I wanted. I found the instructions on Mozilla if files uploaded but not display, displaying my profile and then folder to delete. I've trashed (different from delete?) and now if I try to open Firefox, I get the message that Firefox cannot open/load because the profile is missing. Please tell us how can I get the profile folder in.

  Thank you

  Create a new profile as a test to see if your profile is the source of the problems.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile in the new profile, but make sure not to copy corrupted files.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• Correction lenses for Sigma 24 mm f/1.4 Art profile?

  The new lens of art 1.4 Sigma 24 will be here soon, and even if it is as good as its competitors, it should produce a heavy vignetting.

  No one knows when the profiles of correction in Lightroom will be released.

  Lars cordially

  Adobe does not release dates announce new profiles. You can however, except that the next minor version update after the release of the lens will give profile to LR.

• I downloaded red CS6 plugin and added to the contents of the package, replaced the existing files with the new without saving, now my thumbnails images RED and the color correction do not WORK! How to bring back my old file importerRed! ?? Help!

  I downloaded red CS6 plugin and added to the contents of the package, replaced the existing files with the new without saving, now my thumbnails images RED and the color correction do not WORK! How to bring back my old file importerRed! ?? Help!

  Try asking in the forum Premiere Pro seems to be an Adobe first Pro Lab

• Error message: the user profile service has no logon. Profile of user was not found.

  Just after that Microsoft updates yesterday we received the following message: the user profile service has no logon.  Profile of user was not found.

  The user is locked.  I tried the system restore, but the computer does not. I don't have a disk of Vista to re - install.  Peux-I re - install online?  I have the product key.

  Thank you

  Joe R.

  ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  See if the information in the above tutorial will help you.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s since the Partition of recovery in case of hard drive failure or System Crash, when you are running correctly.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• Manual lens correction works not properly.

  I am trying to correct the perspective of an image in lightroom or in the vertical and horizontal manual lens corrections are not working properly, they are extending to the image in a weird way. I used these cursors repeatedly but I don't know why sometimes, they stretch the image. Here's a video that shows the effect of cursors: Lightroom: manual lens correction works not properly - YouTube. I would like your opinion on this is that you know how I can solve this problem. Thank you

  Controls LR Vertical and Horizontal Correction lens are designed to 'fix' the perspective distortion. What is the perspective of "normal"?

  Normal lens - Wikipedia, the free encyclopedia

  Lenses wide angle move the vanishing points more far and telephoto lenses get the close.

  https://en.Wikipedia.org/wiki/Perspective_distortion_%28photography%29

  LR Vertical and Horizontal controls use the focal length and camera metadata from the image file and adjust the image based on its effective focal length. A goal of 200mm if on a 1.5 crop body factor has an effective focal length of 300mm, resulting in an extreme telephoto perspective. That's why you see more "stretch" the image when you adjust the Vertical control, with a focal length lenses below)<>

  The image file video YouTube has vertical converging vertical very light, slight clockwise rotation and distortion in light pad. You should be able to correct the image for parallel verticals with small values of Vertical and Rotation adjustment. I suggest using "Activate profile Corrections" (profile tab) to fix the small amount of lens distortion.

  So always questions please post the image file on Dropbox or other filesharing site and I'll take a look. Thank you.

• Profile lens Corrections problem

  I recently dug a Sigma 70-300 APO lens (supported in LR 5.3) that I have not used for some time and imported some photos taken with this lens in LR 5.3.

  I have an import preset that a Lens profile verified Corrections. However, after importation, the lens correction is not applied - the 'allow the Correction profiles"box is checked, but under"Lens Profile"'Make' it shows just 'None '. If I manually select Sigma in the box ' Do ' the good lens is then applied to the boxes 'Model' and 'profile '.

  As I said, the lens is supported and shows herself to be taken care of after I chose to do.

  I tried to screw up the "Préférences" folder

  Can anyone throw any light on this? It's kinda a drag to have to manually select something that should be automatic.

  Hi KevetS,

  Unfortunately, choice of automatic objective profile does not always work with lenses non - OEM (it has to do with poorly matched metadata).  On the plus side, we anticipated this and provided a way in Lr to customize your default lens profile settings so that you must manually switch the selection process of profile for each of your images.  Here's what you do:

  1. open an image taken with the lens.

  2. go in the goal to develop Correction, then select Activate profile Corrections.

  3. choose the manufacturer suitable for the lens in the popup to Make (Sigma in this case). LR will try to automatically find the correct profile now.

  4. If Lr cannot find the right profile automatically after step 3, then choose the appropriate model for the lens in the popup of model and the desired the profile popup profile (it looks that you need not do so in this case).

  5. choose Set new lens profile by default from the context menu.

  In the future, newly imported images taken with this lens should automatically get matched with the right profile. In this way, that you don't have to go through manual selection. Basically you are "teacher" Lr what metadata (ID information) is your goal, using an example image.

  You can repeat these steps for each lens that has this problem.

• Impossible to activate the correction lenses for images

  I try to get all the JPEGs, shot with a particular camera to have profile lens corrections applied to them. So with a jpeg that is selected in the development module I check on "Enable lens corrections" click setup and click "save new lens correction default profile." But it does not work. The next jpeg that I select is not activated lens corrections. Or it does not work if the setting to develop, I click on set default settings > update current settings. I think I have to activate the lenses to each image corrections. What I am doing wrong?

  Settings that you did for images should apply to others or the images differently than what I understand, you were doing:

  You say that you update to current settings >.

  This means that you update your lens correction parameters (that you developed earlier) with the parameters of the new image (which does not have lens applied correctioons).

  Instead, try the following - in the develop Module:

  Once you have the frame for a picture, select more images without deselecting the first image (ctrl + click on the images more).

  Your first image should have a light gray frame, other images, a slightly darker gray frame. This means that all images are selected, but your first image is active.

  At the bottom of the right pane, click . A dialog box appears that allows you to check the settings you want to apply to the other images.

  Check or anything that applies in the case of sub-options of lens correction.

  Click . Your lens correction should now be applied to other images - and also other parameters of development if you checked them.

  WW

• When I press the download profile it keeps giving me an error message and I don't know what to do

  When I press the download profile it gives me an error that says safari could not install a profile on an unknown error and I don't know what to do

  You cannot download files via Safari. Files PDF is the only exception I know.

• Unable to get copy of targeting DAQmx.dll 4.5 / / the type 'NationalInstruments.ISynchronizeCallbacks' is defined in an assembly that is not referenced.

  I inherited a software project that uses the NationalInstruments.DAQmx.dll library. I currently have the 13.0.40 32-bit version of the library. I rewrite the 64 bit .NET 4.5 and have found problems when you use the 13.0.40 version. Namely the two errors below

  Error    1    type 'NationalInstruments.ISupportSynchronizationContext' is defined in an assembly that is not referenced. You must add a reference to assembly ' NationalInstruments.Common, Version = 13.0.40.190...
  
  Error    2    type 'NationalInstruments.ISynchronizeCallbacks' is defined in an assembly that is not referenced. You must add a reference to assembly ' NationalInstruments.Common, Version = 13.0.40.190...

  Research mistakes online, I think that the problem is that my current DAQmx.dll is the .NET 4.0 framework and my new project target .NET 4.5.

  I went on the Web site of NOR and downloaded the NI DAQmx 15.1 "Downloader" (found here http://www.ni.com/download/ni-daqmx-15.1/5617/en/). This executable, once executed, then downloads ~1.7GB compressed files, once unpacked there are a large number of software and current documentation. After speaking with an engineer application OR on the phone he asked me to launch the NI DAQmx setup in the top level of the unpacked files folder. He then installed what I would call the Suite OR software... (Front flip, after I did an uninstall, the uninstall program me notified that I'm removing 224 pieces of software.) So why I call it the Suite OR).

  After installation, I was tasked to search for a similar folder installation directory to MStudio / / DAQmx / / DotNET / / assemblies / / current for the new version of the DAQmx.dll but only found dll starting with NationalInstruments.Common and anything ending with DAQmx. I also did a search on the full installation for the dll directory and found no NationalInstruments.DAQmx.dll. I decided to try the . Common.dll suggests that the naming convention may had changed, nothing helps.

  (Just some extra info) Finally, I went to the machine that has the old version of the Suite OR on it (I develop on a separate computer from the one using my instrument NOR) and looked under the same folder I mentioned above. Under this folder I locate a NationalInstrument.DAQmx.dll if this is the one I currently use. I also find a 64-bit version of the 13.0.40 dll, which is nice, but still has the same problems as the 32-bit version.

  So I guess my questions are now

  • Do I have reason to think that I need a newer dll? The one with the XX naming convention. XX.45 (15.1.45, I hope)?
  
  
  • If so, a DAQmx.dll who target 4.5 is of NEITHER?
  
  
  • If it does not exist, where can I find it? ...

  Well, I think I have mislead you again NYC. It seems that my problem has not been resolved. I tried all the libraries for each version, Measurement Studio from 2010 to 2013.

  The folder structure I have is as follows.

  \MeasurementStudioVS2010\\DotNET\\Assemblies\\Current\\NationalInstruments.DAQmx.dll
  \MeasurementStudioVS2010\\DotNET\\Assemblies\\15.1.40.61\\NationalInstruments.DAQmx.dll

  \MeasurementStudioVS2010\\DotNET\\Assemblies (64-bit)\\Current\\NationalInstruments.DAQmx.dll

  \MeasurementStudioVS2010\\DotNET\\Assemblies (64-bit)\\15.1.40.61\\NationalInstruments.DAQmx.dll

  \MeasurementStudioVS2012\\DotNET\\Assemblies\\Current\\NationalInstruments.DAQmx.dll

  \MeasurementStudioVS2012\\DotNET\\Assemblies\\15.1.45.61\\NationalInstruments.DAQmx.dll

  \MeasurementStudioVS2012\\DotNET\\Assemblies (64-bit)\\Current\\NationalInstruments.DAQmx.dll

  \MeasurementStudioVS2012\\DotNET\\Assemblies (64-bit)-15.1.45.61\\NationalInstruments.DAQmx.dll

  \MeasurementStudioVS2013\\DotNET\\Assemblies\\15.1.45.61\\NationalInstruments.DAQmx.ComponentModel.dll

  Obvious all directories not marked 64 bits fail because they are not 64-bit. Directories marked 15.1.40.61 do not work gives me the original error. because they target DotNET 4.0. Under the VS2013 directories are not NationalInstruments.DAQmx.ComponentModel.dll only NationalInstruments.DAQmx.dll. Directories marked with 15.1.45.61 highlighted give the same error, namely

  Error 1 the type 'NationalInstruments.ISupportSynchronizationContext' is defined in an assembly that is not referenced. You must add a reference to assembly ' NationalInstruments.Common, Version =15.0.40. 49154...

  Which I guess means that the name of the 15.1.45 directory does not coincide with the 15.0.40dll version. Am I misunderstanding this error, or am I wrong that the dll under 15.1.45 are not what they are labeled as?

  For reference, here are two snippits of code I'm trying to do work.

  using (NationalInstruments.DAQmx.Task analogWriteTask = NationalInstruments.DAQmx.Task (()) new / / errors arise here using task
  
  {
  
      String [] channels = DaqSystem.Local.GetPhysicalChannels (PhysicalChannelTypes.AO, PhysicalChannelAccess.External);
  
      analogWriteTask.AOChannels.CreateVoltageChannel (channels [1], "aoChannel", MIN_VOLTAGE_OUT_THEORETICAL, MAX_VOLTAGE_OUT, AOVoltageUnits.Volts);
  
      AnalogSingleChannelWriter writer = new AnalogSingleChannelWriter (analogWriteTask.Stream);
  
      writer. WriteSingleSample (commandValue, true);
  
  }

  
  

  using (NationalInstruments.DAQmx.Task digitalWriteTask = NationalInstruments.DAQmx.Task (()) new / / errors arise here using task
  
  {
  
      String [] channels = DaqSystem.Local.GetPhysicalChannels (PhysicalChannelTypes.DOPort, PhysicalChannelAccess.External);
  
      digitalWriteTask.DOChannels.CreateChannel (channels [1], "port1", ChannelLineGrouping.OneChannelForAllLines);
  
      DigitalSingleChannelWriter writer = new DigitalSingleChannelWriter (digitalWriteTask.Stream);
  
      writer. WriteSingleSampleMultiLine (commandValue, true);
  
  }

  EDIT: So the real problem is that I have not included NationalInstruments.DAQmx.Common.dll in my project.

• Cannot create a new user account, the user profile service service does not log and cannot install a program

  I can't create a new user account (Windows 7): the user profile service service has no logon.

  I have an administrative account which is the only account. I have problems with the installation of Autodesk Inventor so I need to create another user to see if I can solve the problem. But when I want to make a new user account and I get the following message: I can't create a new user account (Windows 7): the user profile service service has no logon.

  I haven't added new programs in a long time and I don't know when this question has been raised as I've had my laptop for 3 years and this is the first time I create another account than my original. I don't want to reset my computer manufactured settings.

  I also followed the http://support2.microsoft.com/kb/947215/en-us but I can't find any registry master in the list of profiles. In fact, I am the only user in there...

  It seems that my computer does not have a record in the system registry.

  In fact, the problem started when I tried to fix the "C:\windows\system32\config\systemprofile\desktop refers to a location that is unavailable. It could be on a hard drive on this computer.or on a network. Check to make sure that the disc is inserted correctly, or that you are connected to the Internet or your network, and then try again. If he can't always find the information could have been moved to another location. "I was at least able to connect in the new user but will load a default profile and therefore do not load the profile properly. It seems I've done worse the problem after doing

  gpupdate/force

  at the prompt as an administrator.

  The very initial problem started all this was when I was running from Autodesk Inventor, it gives me the following error: Mismatched Ole32.dll and Comcat.dll. And the support2.microsoft.com/kb/201364/en-us is to say that since I am under Win7, the solution is not applied. So I'm stuck. And the next move was trying to see if a new user profile may solve the problem.

  Any suggestions will be greatly appreciated.

  And if possible, please also suggest a "repair" method so I can get Win7 function correctly without reinstalling the whole machine. "" I use a laptop so I do not have installation media.

  Thank you.

  Hello

  Thank you for your update on the issue.

  I suggest that you try to run the file system (CFS) Checker scan to check all the corruption of .dll files.

  1. Go to Start, click all programs and open the Accessories.
  2. Right-click on command prompt in the list programs, and then select run as administrator. If you are prompted for an administrator password or for confirmation, type your password, or click OK.
  3. In the command prompt, type the following command and press ENTER:
     sfc/scannow

  For more information, see this link:

  http://support.Microsoft.com/kb/929833/en-us

  Please post back your results for assistance.