Dragon 11 installation needs of Visual C++ 9.0 Runtime

Similar Questions

• Need a visual cue for the status of Plugins

  Need a visual cue for the status of Plugins:

  . . . "Ask to activate" - these are light gray - it's good

  . . . "Always enable" - should be in light green

  . . . 'Never turn on' - should be in red light - it currently goes to a slightly darker shade of grey

  Be able to sort them based on the State

  The above would make it easier to verify that they are the way you want

  There is only a ' true/false' = active tribute to work with, so you cannot always distinguish between activate and ask to activate.

  .addon-view[type="plugin"][active="false"]{box-shadow: inset 0pt 0pt 100px rgba(255,144,144,1.0)}

• Error: This installer needs to access 'My Documents'

  Hello

  When my installer has been installed on Windows 7 Professional (64 bit), I got the following error:

  Error: This installer needs to access 'My Documents'... (see attached screenshot).

  The installer is already successfully installed on Windows 7.

  I did the Setup program on Windows XP (32 bit), LabVIEW 8.6.1

  Someone knows this error arise? And someone knows a solution?

  Thank you

  Nick

  _nick_ wrote:

  Hello

  When my installer has been installed on Windows 7 Professional (64 bit), I got the following error:

  Error: This installer needs to access 'My Documents'... (see attached screenshot).

  The installer is already successfully installed on Windows 7.

  I did the Setup program on Windows XP (32 bit), LabVIEW 8.6.1

  Someone knows this error arise? And someone knows a solution?

  Thank you

  Nick

  Yes to one of these government sites where users are prevented access to their desktop. The workaround is to plan a person to MAKE their installation to enter the admin password.

  Ben

• Installation of Windows 8: the Windows installation needs administrative privileges to continue

  Try to install that my digital upgrade newly downloaded to Windows 8, my installation was arrested whith error message "windows installation needs administrative privileges to continue" and the closed facility.

  I am upgrading to Windows 7 64 bit and I use a laptop Asus N80VC.

  Right-click the Windows 8 Upgrade Wizard, and then click Run as administrator.

• I use display spectral pitch to analyze changes people´s speech (for research purposes). I need the visuals of interesting changes to the basic blue line to document my results in the articles. It is a more sophisticated way to th

  I use display spectral pitch to analyze changes people´s speech (for research purposes). I need the visuals of interesting changes to the basic blue line to document my results in the articles. It has more sophisticated way to do than to take a screenshot? It is very short sequences consisting of a few words I need to visualize somehow on a scale of hertz.

  Hearing is not really adapted to the analysis of speech on a very basic level, I fear. He does not have analysis by Wavelet, or something like that and certainly won't break down whatever it is complex in its components. What you really need is a software dedicated at the end of the analysis of speech, and some of it is free - try this: Praat: doing Phonetics by computer

• I want to install Adobe Audition 3.0 (freeware) on my PC - Installer needs a series

  I want to install Adobe Audition 3.0 (freeware) on my PC - Installer needs a serial No. - which I don't because it is freeware.  Please advise!

  It's not freeware.  (legally), you are authorized to use the adobe 3.0 hearing who needs no activation only if you have purchased a license hearing 3.0 (long ago).

  If that fits your situation, download the installer of audition 3 and use the serial number posted error: Activation of the unavailable server. CS2, Acrobat 7, pass a hearing 3

• Received the error during installation because of Visual C++ is not installed

  Hello - I had a very hard time with Adobe Pro every step of the way. I have install at this time, but - although he does - he informed me that an MSI installation would not install Visual C++ 2013 and try to Setup.exe. I tried from there and got exactly the same message. I forged ahead anyway, and the installation is complete. I can open the program, open a file and save an email in pdf format (which so far I've had, because after the problems of today with Adobe, I need holiday...). In any case, there are a lot of things on my computer that has a name with 'end' in there, so I can't believe that I have not itself if I may not have the right... I am on Windows 10, and I'm a newbie total to it (even if, so far, it has not been as bad as I expected, except that nothing is where it was under WIndows 7). Windows 10 would be the problem? Is there something I can do? And what loss of functionality can I expect? Thank you.

  "Download and install the latest Microsoft Visual C++ 2010 Redistributable Package (x 64) Microsoft Web site - www.microsoft.com."

  After you have uninstalled both of these special runtimes of the VC (VC ++ 2010 (x 86) and (x 64)), reinstall it from http://support.microsoft.com/kb/2019667. Also, make sure that you do not install the security update as well to: http://www.microsoft.com/en-us/download/details.aspx?id=26999.

  If the above fails, rename folder caps caps-former...

  Note: You need to maybe uninstall and reinstall applications CC except CC Adobe app.

  Geographical area:

  C: > Program (x 86) > common files > Adobe.

  Inside the Adobe folder, you can locate the Caps folder.

• I use comodo dragon and ice of comodo dragon. I need to know how to import my profile/settings of effortless ice dragon dragon? Help, please!

  I want / need to get my bookmarks, forms, etc. of the dragon of comodo to the comodo dragon of ice with help. I don't know how because I tried to import from Chrome from ordinary dragon is based on that, but obviously it did not work. I need help please.

  Probably best to use an intermediate file to HTML format. I found these directions on the Comodo website:

  (1) the export of Dragon of Comodo

  • Click the Comodo Dragon icon located in the top left corner
  • Select "Bookmark manager" in the menu.
  • Click on "Organize" and select "Export bookmarks" from the menu.
  • Choose a location where you want the bookmark to be saved and click on the Save"" button.
  • The bookmarks are saved in an HTML file.

  Source: Comodo Dragon - import and export bookmarks. Web browser

  (2) import into Comodo zefa

  • Click on the zefa button in the upper left corner:
  • Select "Bookmarks" menu > show all bookmarks.
  • Click on the "Import and backup" tab on the "library" window
  • Click "import bookmarks html import."
  • Navigate to the HTML file that is saved on your computer, then click 'open '.

  Source: import and export bookmarks, history | Web browser and Internet Solutions

  It work?

  If you have already used Firefox, I'll be curious to hear your comments on how zefa is different.

• 10 Windows Installer needs re install SoundMAX...

  Maybe it wasn't the smartest computer decision that I've ever done, but I have an old HP nw8440 Mobile Workstation that I installed Windows 8.1 on and then installed Windows 10 Technical Preview on. So far so good. But last night Microsoft installed upgrading of version newest and he needs to re - install SoundMAX inorder to give back me my audio. What drivers and do I use to thios OS, because HP has only drivers for this model of laptop until Windows Vista? If anyone can help, I'd appreciate it.

  Thank you

  Randy McPhie

  Hi, Randy:

  I would try the Vista audio driver from support of your PC and driver page.

  You may need to install manually if auto installation does not work.

  It's fun to experiment with operating systems.

  I currently hit a brick with the latest version W10 wall on my HP Elitebook 6930p.

  Everything worked great until the latest version is out.

  Now I get a Code of 12 on my reader (not enough system resources).

  I pointed out the error, as well as not being able to get rid of the lock screen, even if I set group policy to disable.

  When the next generation comes out, I'll give it another shot.

• 10.11.1 full installer needed for 5K 27 "iMac end 2015

  I bought a new iMac Friday (probably my 8th iMac).

  I did a restore to Time Capsule and Mac has been randomly turn off several times a day, today it was happening about every 30 minutes.  I did some troubleshooting and was not able to solve, so I decided I need to reformat and reinstall and I won't do a full restore to Time Capsule, because there must be some system file incompatible that causes the problem.  I tried to install on a USB and Firewire drive, but for some reason 10.11 any, that the new iMac won't start them (but other iMacs don't start them).

  BTW, followed instructions online to make my own and USB not boot a MacBook Pro and older iMac, but not the new iMac.

  I think the iMac nine requires 10.11.1 at startup, but it looks like you can download installer 10.11.

  Apple told me to bring it and they he will wipe away so I can start over, but it's a chore.  I have done several times before.  Anyone know where to find the 10.11.1 full installer?

  You can reinstall OS X without an OS X flash drive or a CD by pressing command + R when you turn on your iMac, this will open the recovery mode and allows you to reinstall a new copy of Mac OS X on your iMac 10.11.1! More details available here:

  https://support.Apple.com/en-us/HT201314

  Let me know if this helped!

• Cannot install streets & trips 2011, error: Microsoft streets & trips 2011 requires the installation of Microsoft Visual C++ 2010 Redistributable

  Original title: streets & trips with GPS Locator 2011 install problem

  I try to install Microsoft streets & trips with GPS DVD positioner 2011 and it fails at the beginning of the installation.  My environment is a workbook of Elite HP 8560w running teacher of Win 7 and Microsoft Office 2010 Professional (8 GB memory, 500 GB disk space).

  I want to emphasize that I will not be plugging the GPS stick on a USB port until the installation process or the installed software requires it.  The installation begins with the display:

  "Microsoft streets & trips 2011 requires the installation of the Microsoft Visual C++ 2010 redistributable. To install the component now, click OK. If you want to stop the installation and exit the Setup program, click Cancel. »

  I clicked on OK to proceed with the installation. Another message was displayed:

  "Please wait while the Microsoft Visual C++ 2010 redistributable is installed."

  After a fairly short period of time, a final message was posted:

  "One of the prerequisite components failed to install. The installation program will now exist. »

  I check that my list of installed programs in programs and features, and Microsoft Visual C++ 2010 is already installed, listed as:

  Microsoft Visual C++ 2010 x 64 Redistributable - Version 10.0.40219
  Microsoft Visual C++ 2010 x 86 Redistributable - Version 10.0.40219

  I tried to start the installation several times but still, he fails and ends at the same point.

  What must I do to properly install Microsoft streets & trips with GPS Locator 2011?

  William Allen

  I thank all participants for their contributions on my problem captioned.

  As I mentioned in one of my previous answers for myself, for me, this issue is now closed.  Microsoft support has accepted my MS Streets & Trips w / GPS for a full refund.  At least, support staff, that I spoke acknowledged that ST2011 was known to be incompatible with W7P SP1 and they offered a full refund.

  A number of responses I received offered possible solutions that I had tried and has said on this subject in previous updates (for example, to run the installation of the data .msi on the installation CD).  Then I still had possession of the ST2011 software, I don't was not informed of Microsoft resetting tool mentioned by Mike L. Robbins, so I can't say if that than me by my installation problems.  Be it, everything is sent to Microsoft.

  I can only hope that if Microsoft releases streets & trips 2012 which does not inherit problems, I lived.  In my view, this thread can be closed now.  Thanks to you all.

  Certainly continue to reply to this topic, if others could benefit from your proposed solutions to ST2011 installed.

• stop the automatic installation of Microsoft Visual C++ redistributable.

  I recently started using a new pc in the office.

  and installed MS visual C++ 2008 express on the PC.

  but when I try to compile a program, I found a problem.

  I checked the "programs and features" in the control panel

  There are many redistributable packages VC ++ in the system, IE. VC ++ 2005, 2008, 2010 redistributable...

  I try to uninstall all the redistributable packages, just keep the VC ++ 2008 Express and its components.

  but when I turned on pc a few days later. all versions of redistributalbes are installed back again. It's really annoying.

  is this a way to prevent this auto/silent install these redistributable packages VC ++? because it messes up my programming environment.

  Thank you.

  Cyberion

  Others are installed only if an installed application needs them.  Every application needs a specific version.

  You aren't the only one with multiple versions (see figure).  I do not know Cmake, but is there a way to 'say' it which one to use?

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

  

• Windows SDK 7.1 not installs on Microsoft Visual C++ Redistributable 10.0.40219

  I try to install the 64-bit from the Windows SDK 7.1 compiler.  But the installation fails with an error (empty) useless.  I tried various fixes suggested in various forums online, but my research suggests that the problem is likely to be the C++ Redistributable package has already installed more recent than the version in the SDK, and he therefore moved not on them.  Unfortunately, I can't seem to uninstall the redistributable files: there no option to uninstall them in programs and features, probably because they were put there as part of the installation of another program.  But I don't know which and have not been able to understand.  I can't just go remove programs at random, so I don't think that kidnapping will work for me.

  Is it possible to get the compiler installed without removing the redistributable files? Microsoft plans to release an updated SDK to update anytime soon?
  For what it's worth, I'm on Windows 7 Enterprise SP1, 64-bit.

  Hello

  The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums for further assistance:

  Development of Visual Studio forums

• Problem with the installation of Microsoft Visual Studio 2010 Service Pack 1 (KB2635973) and (KB2645410)

  Hello

  Enjoy views of expert here since I was a newbie in the Windows servers.

  I have an Exchange Server (Windows Server 2008 R2 SP1 Standard (the one used for the 2003 Server Migration) and now having issue to install 2 security updates below;)

  Update for Microsoft Visual Studio 2010 Service Pack 1 (KB2635973)
  Installation status: failed
  Error details: Code 66A

  Update of security for Microsoft Visual Studio 2010 Service Pack 1 (KB2645410)
  Installation status: failed
  Error details: Code 66A

  Tried to install and restart twice, but always failed. Did some research and found this link.

  https://TechNet.Microsoft.com/en-us/library/security/MS12-021

  However, with my basic knowledge, seems that I'm not sure the article.

  Grateful if someone could advise me on this.

  Kind regards

  Sir Kon.

  Hello

  Your question is beyond the scope of this community.

  Please post your question to the MSDN Visual Studio Forums.

  https://social.msdn.Microsoft.com/forums/vstudio/en-us/home?category=VisualStudio

  See you soon.

• Installation need help Pls: CS6 DVD "license revoked".

  Greetings-

  I really need a solution and am so worried, I'm sick.  Everyone here probably knows already what I discovered: there is no support phone or chat on this product. so this is my only hope for help.

  Product and system:

  Adobe CS6 Design & Web Premium DVD (original purchaser 9/2013)

  New laptop Toshiba L55 - C Windows 10. Intel core i5; 8 GB of ram; 64 bit

  Account admin & privileges

  History of the issue:

  My first installation went well past that I can remember.  In September 2014, my hard drive crashed and had to reinstall.  I remember having a problem of 'permission', called, and a living human being has solved the problem.  Unfortunately, I don't remember the exact error message, but I know that it is only installed a time (9/13) before the crash (new hd 9/14) - the same ip address, if adobe could have detected or if she was important.  I was always under the impression that we could have 2 existing facilities from a dvd.  I got the phone call on 9/14 report that the software was a reinstall on a hard drive crashed and said when I tried to install my second copy, there should be no problem.

  My laptop original has always software asset on that.  I want to be able to use two laptops (where the two copies) if possible so I can get the other oldest with me and leave a new home.  Question: The buyers are not entitled to a "free-over" when a computer falls down, such as my lost original installation + my later resettlement would not mean I'm stuck?  (I suspect that my recording software does not get connected properly as a "Reinstall due to a computer failure" at the time, I called to report - so a poorly connected two active facilities limit error the revocation.)

  It is my understanding that I have the right to have - at all times - both legal and legitimate copies for my own use, on my own computers.  Right?

  I can uninstall 'nothing' which is currently where I stayed flat with 'no' software whatsoever!  I don't have that brave.

  Error message when you install today on the new computer:

  "You have entered the serial number has been revoked." Cannot install this product. Please contact customer support. »

  Thank you in advance for your help!

  Volume License https://helpx.adobe.com/x-productkb/policy-pricing/volume-licensing-site.html