Dreamweaver does not start when it is installed on the second disk

Similar Questions

• Vista 64 Bit Home Premium does not start when a disc is in the optical drive

  I tried to understand this for a long time, but I thought I might as well ask for help.  I use Vista 64 - bit Home Edition Premium and the problem I have is that I cannot restart my machine if a disc is in the optical drive. Specifically, if I have a DVD or Bluray disc in the optical drive (IE a BD - ROM drive). When I restart my computer and a disk is present, the startup process is going past the initial windows screen, but that's how far it goes. My desktop (I don't have a password to connect). Initially, I thought it was a matter of priority to boot but the boot process starts from the hard drive but stops at half way through. Then, I went into the BIOS and removed the optical drive completely from the boot priority list.  But there is no change in behavior. The process stops with the only thing visible on the splash screen is a black screen and the hard drive light flashes and goes out from time to time.  I use this computer as my Home Theater PC and sometimes I have to restart my machine when a movie DVD or a Bluray movie is in the optical drive. I would appreciate any response that can help me solve this problem...

  Thanks in advance...

  There may be something wrong with the files on your hard disk.  We will try to update to see if it helps:

  Do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not resolve the problem, try the following:

  To run the Bootrec.exe tool, you must start Windows RE. To do this, follow these steps (I believe you need a disc for Installation of Vista to do that, even if some Installtion OEM disc might work, but probably not all the recovery discs).

  1. put the Windows Vista installation disc in the disc drive, and then start the computer.

  2. press a key when you are prompted.

  3. Select a language, a time, a currency, a keyboard or an input method, and then click Next.

  4. click on repair your computer.

  5. click on the operating system that you want to repair, and then click Next.

  6. in the System Recovery Options dialog box, click command prompt.

  7. type Bootrec.exe, and then press ENTER.

  Note If rebuilding the BCD does not resolve the startup problem, you can export and delete the BCD, and then run this option again. In doing so, you ensure that the BCD is completely rebuilt. To do this, type the following commands at the command prompt Windows RE:

  ·        bcdedit/export C:\BCD_Backup

  ·        c:

  ·        Boot CD

  ·        BCD attrib s h - r

  ·        Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  If this does not work, or if you do not have the disk, try EasyBCD http://neosmart.net/dl.php?id=1 and see if that works and does everything well.  Make sure what you are doing or you could mess up your boot files and you'd be in a lot of trouble.

  I don't know if the problem is even caused by startup files (but it is possible if it is not the BIOS), but you'd better check and if the procedures are followed to the letter as stated there is no harm in trying.

  Good luck and I hope this helps!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Acer Aspire E1 471 does not start. "no boot device, insert the boot disk and press any key".

  Acer Aspire E1 471. 8 64-bit Windows.

  It does not seem to recognize any boot device.

  Already tried:

  -F2 for configuration of the bios F9 to restore the default settings, F10 to save and exit and restart.

  -boot from usb, dvd... the screen turns black after the screening.

  -forcing safe mode or windows recovery screen (System Restore, auto repair, cmd, etc) the screen goes black, too and after about 20 minutes. the blue screen with the unhappy face appears (pc must be restarted)

  Any suggestions?

  Hi FerminSampo,

  We will try to repair the startup entries, I suggest you follow these steps and try to solve the problem of Windows 8 start.

  a. starting from hirens CD.

  b. try these commands from the command prompt.

  Bootrec /fixmbr

  Bootrec /fixboot

  Bootrec /rebuildbcd

  c. restart the computer and check if the problem persists.

• Satellite C660 does not start when it is connected to the battery

  Satellite C660. I can only start with the battery disconnected and connected charger.

  Since when you noticed this problem?
  Is the battery that you always use original one you have with your machine?

  When Windows is fully charged and you put the battery in addition is recognized correctly battery?
  What happens when you unplug the AC power supply

• When I try to start Dreamweaver CS6, I get a pop up window asking me to start a trial of CC. If I close that window, cs6 dreamweaver does not start as he did yesterday. What can I do?

  When I try to start Dreamweaver CS6, I get a pop up window asking me to start a trial of CC.

  If I close that window, cs6 dreamweaver does not start as he did yesterday. What can I do?

  I webxite who has problems, and I get to him because I can't start Dreamweaver.

  Help! Help!

  If you bought it, you have the version under license.  You have not forever.

  Creative products of cloud is not the serial numbers.  You enable product Cloud by logging in with your Adobe ID and password.

  Nancy O.

• AiOSoftwareNPI (* .ms) the Setup program does not start when I start my computer.

  original title: AiOSoftwareNPI

  I'm having a problem with a software AiOSoftwareNPI problem (* .ms) the Setup program does not start when I start my computer.

  I know it's a Windows Installer but I don't have a disc with this route. I even tried to reinstall the windows xp disk and it does not work, I still

  get the same box when I shutdown and restart. The box allows me not to leave him continues to appear.

  Thank you

  Ms. C

  After doing a Google search for AiOSoftwareNPI and followed by the reading of many different threads in various forums, I found that it is for drivers for an HP all-in-One printer.

  You have an HP printer?

  If so, the usual suggestion was to place your HP printer disk in your CD/DVD drive and restart. After reboot would be installed the necessary files and the pop - up would more appear at startup. I don't know if it will actually work because in all the discussions I've read, none of the original poster never responded by saying that it worked or not.

  The next most common suggest was to download the latest driver for your HP printer to your version of Windows (including at the level of the ILO) and install it. Yet, not a single original poster has responded.

  In fact, if you have an HP printer I suggest to visit the web site of HP support below the link to get the latest drivers and their installation. Visit the support for the correct installation method and if you need to remove the old driver first. You can also visit the communities of Support HP for assistance (a link for communities is also on the next page).

  Support HP & drivers
   http://WWW8.HP.com/us/en/support-drivers.html

  Kind regards

• Msconfig does not start when typed into the starting box?

  Msconfig does not start when typed into the starting box?

  Original title: windows

  What is the listed program in 'C:\Windows\System32' if you look in Windows Explorer?

  If this is the case, it starts if you click on it?

  Update your anti-virus software and run a full scan.

  Then download, install, update and run a full scan with malwarebytesfree. (Keep free, no need to enter in any trial etc.).

  Then run a sfc/scannow to see what that brings.

• Newly purchased Dreamweaver does not start

  Hi, everyone, hope, will help here, as do not have access using Dreamweaver simply because it does not start... Just purchased the program yesterday and today installed with Photoshop, but Photoshop is correct and just showed Dreamweaver pop with the Preferences file and Windows has reported an error and closed Dreamweaver... Again he started later... Tried to uninstall and install again and it's always the same, what can I do? Really frustrated at that... and my laptop meets all the conditions...

  Have you looked in the Dreamweaver FAQ? There are here, both of which may help you:

  • CS4 installation issues
  • Dreamweaver crashes at startup

  If your computer is an Acer, the answer is in the second.

• PC does not start when you press the power button, after that starts automatically as a ghost!

  I have HP Pavilion a6030in, my pc does not start when I press the power button / stop ther, but she starts automatically after some time after that, it works fine.

  Even once when I closed and leave it for a while and still the problem is not resolved.

  Help, please

  I solved the problem

• Sound does not work when it is connected to the TV with HDMI

  I have a HP Pavilion Notebook PC, DV7 - 6813EV, running windows 7 Home Premium 64-bit SP1. My problem is that I have no sound when connected to my TV HDMI connection and press. Please could someone help me? Thanks in advance

  Hello gematz,

  The sound does not work when it is connected to the TV via HDMI.

  Go to start.

  Type sound.

  Click sound

  On the playback tab, click with the right button on the HDMI interface, and then select set as default device.

  If you do not see the HDMI, right click and select devices see off, then set as default.

  I would like to know how everything goes.

• Windows XP does not start. Can I boot Windows from a disk so that I can recover the data?

  Windows XP does not start. Can I boot Windows from a disk so that I can recover the data? This should be a CD because it doesn't have a floppy disk on my laptop drive. It is maybe that my hard drive has begun to fail and therefore cannot locate XP startup files. I can not start using one of the other methods of starting for example. Safe mode. If I can recover the data, I can then reload Windows and check the surface of the disc etc etc. Thank you all for your comments. Steve

  Lately, I'm leaning toward the Hiren's BootCD you can download here:

  http://www.hirensbootcd.NET/

  On the left, click on download, scroll down, choose the most recent version

  The download link is a little hard to see.  It is at the bottom of the page, above the drop for older versions and looks like this (click this component to download the ZIP file):

  Direct HTTP mirror + Torrent, Torrent Magnet

  Click the "Live HTTP Mirror" link to start the download and save the ZIP file on your desktop of somewhere that you can remember.

  The ZIP file is large, so the download will take probably some time to complete.  Then unzip the download to extract theHirens.BootCD.ISO file that will be used to create your new bootable CD.

  Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD.  You must use software that includes how to burn a. ISO to a CD to create a bootable CD.

  File ZIP the Hiren is the file BurnToCD.cmd that you can double-click to launch it.  The BurnToCD.cmd will use the file BurnCDCC.exe to burn the. ISO file onto a blank CD using your existing CD burner.  You can also use your own burning software as long as your software is able to create a bootable CD. ISO file.  More modern burning programs can create a bootable CD. ISO image.  Create a CD from an ISO image bootable is not the same as just the file on a CD burning.

  If you need a simple and CD burning, this is a free software popular software:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your new bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.
  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When starting on the Hiren's CD, you will see a menu of options.  Choose Mini XP.

  It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.  You will feel at home.

  Using the Mini XP, you can access the Internet, maneuver around your system, copy files, replace the files, run the scans for malware, etc.  There are dozens of free and useful tools included in the CD that can be used to repair your system, or copy files to another device such as a USB device or an external drive if drop in trying to repair your system.

  If you want to see if you can fix your system, describe what is happening when you try to start and to answer these questions:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

• I have a new computer running windows but 10, 13 photoshop elements disc.  Insert the disc does not start something going and looking at the files I do not see an installation executable.

  I have a new computer running windows but 10, 13 photoshop elements disc.  Insert the disc does not start something going and looking at the files I do not see an installation executable.  I don't know what to do.

  Download from Download Photoshop Elements | 14, 13, 12, 11, 10

  Install and enter your serial number.

• Here's a strange. I have a HTML page with this time a wmv video. It works perfectly from a USB stick or SD card, but does not work when they are copied to the hard drive

  I have an HTML page created with web expression 4. It contains only a wmv video. It works perfectly when it is called from a USB stick or SD card, but does not work when they are copied to the hard drive. The results are the same with IE and Firefox. It don't make no difference if I use Media Player V9 or V11. He has no control on the page Media Player. Video and html files are in the same directory. Here is the code snippet:

  LIFT, DRAG, THRUST and GRAVITY

  
  

  
  
  

  If I run it on a machine with Win 7 there is no problem.

  Richard Grosser

  Hi Richard c. Grosser,.

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Microsoft Expression forums.

  http://social.expression.Microsoft.com/forums/en-us/categories

• Error - Connection Internet Service does not start when try to start Windows Security Center.

  Original title: Windows security center usually run in windows XP.

  When I open the control panel and click on security, Windows Security Center indicates that it is not executed and wont run then when I try to turn it on I say error message does not start internet connection service. Also, my computer has been slowing way down lately and it takes forever to do even the simplest taskes. I just uninstall norton because my subscription ran out and then I installed MSE and malwarebytes MSE runs even slower, so I got rid of him.

  -Edit
  I also tried to use FixIt, but he said that there was an error during installation.

  Thank you. I had security work center. That's how I did it.

  I wen to your link and found that I needed to go to start-my network places - view the network (in the sidebar) connections - click Properties (click on) Local Area Connection 2 - click on the Advanced tab - click settings (skip this step if who does not appear)

  now, here, he said that there is an error and that I needed to start a process. I think it was 'Windows management instrumentation' but whatever it is, click Activate and change the startup type to automatic, and then click Start. then try to then you should do the same thing with

  • Application Layer Gateway Service
  • Network connections
  • Knowledge of the network (NLA) locations
  • Plug-and-Play
  • Remote Access Auto Connection Manager
  • Remote Access Connection Manager
  • Remote procedure call (RPC)
  • Telephony

  Then Security Center. When you press OK in the properties, you should see a small lock appears on the network connections icon. now Security Center should work.

  useful articles:
  http://support.Microsoft.com/kb/919291
  http://support.Microsoft.com/kb/827328
  http://TechNet.Microsoft.com/en-us/library/bb457029.aspx

• Windows 7 Enterprise does not start successfully after re - install

  I have just reinstalled Windows 7 Enterprise 32-bit with SP1 on my laptop HP 6715 b. (I use 32 bits for any software that I develop is always compatible 32-bit.)

  After you have re-installed however, it does not start correctly. What came with windows announce "Starting Windows", but the following animation never - start the four lights that turn and turn into the "Flying Windows Icon.  It then crashes right there - do nothing, no matter how long wait.

  If I can put the machine power off and re - start, we are at the "Windows Recovery screen" - because it has not started correctly the last time.  From there, I can choose to make a recovery and return to the last Point of good restoration, i.e. on a freshly installed system before the update of Windows, of course.

  If I select "Start Windows normally", it starts however. But it is not 'Normal '. For example I can't finish my "Windows Easy Transfer".  It says that it cannot connect to my domain name - even if I am connected to my area and have been using it to install other software.

  Or I can do a Windows Update "normally". The last time I tried, it is gone for hours without finding what be - so I left it overnight. In the morning he had apparently found nothing yet.  However when I turned off the machine and then turn it again - he told me there are 211 updates installed.  WHO has literally all day.

  I'm not happy to come back to the last good Restore Point.  I did once.  He has NOT fixed the problem.

  I also tried:

  • Using MSCONFIG to disable all the startup and Services, apart from Microsoft and Kaspersky - no improvement.
  • Do a CHKDSK - revealed nothing.
  • Start in Safe Mode, did change his behavior.  This time I do not have the Herald "Starting Windows".  But turn the machine works again once, return me the 'Windows Recovery screen '.

  Ideas anyone? I'm at my wits end.

  It's OK guys.  I have it sussed.

  He was objecting to the fact that I had my USB with my "Windows Easy Transfer" files on it, plugged during the initialization of the system.

  Also, I was wrong in my thinking on how "Windows Error Recovery".  I assumed that he would do all that it checks before proposing to do a system restore.  It is not, it suggests a restore of the system first.  If you say NO to that, then he makes his audit.

  What is finally here, is that I finally chose an option before he went into the system recovery.  Then, I waited until he was asked to do a system restore.  I said NO, so he went in it checks.  He went through his analysis and finally concluded it was some "system unspecified device" recently added.

  Well I haven't nothing added to my machine for years.  So, I was puzzled.  Then I thought ' well, I don't normally have my key USB is plugged. "  I wonder... ».  I therefore disconnected the USB drive and rebooted the machine.  The rest they say is history.

  Hope this sorry tale helps someone else.  It just cost me four days!