Dreamweaver no longer sees my model

Similar Questions

• Vista no longer sees my nvidia 8600gt video card

  Vista no longer sees my nvidia 8600gt video card, I didn't add or uninstall new programs or hardware, antivirus is up to date, and on a side note the pc stops by itself (when you click on the start menu) this day 1 began after my video card problem

  I went to the website nvidia web and downloaded the drivers for this vista said after downloading that peripheral is not found, the pilots were incompatible with the video card, (not a direct quote and the video card was referring to shit a stock)

  The map went kaput

• You are running an operating system that Dreamweaver no longer supports.

  You are running an operating system that Dreamweaver no longer supports. so I can not download a trial version that I am operating windows vista, how do I get this trial version

  Thank you

  For CC, you can not. It is not supported.

• ID no longer sees my iPad via Folio Builder

  I ran into a problem where InDesign CS6 no longer sees my iPad via Folio Builder.  It was working perfectly for weeks in my version of the app.  Was able to perform unit tests throughout the construction, but for some reason any InDesign no longer sees the iPad.  When I connect the iPad to my macbook pro via USB, iTunes detects and recognizes.  I have all the recent software updates that are installed.  I even reinstalled Adobe Viewer app.  I make sure the viewer Adobe is running on my iPad and the cable is connected.  Any suggestions or advice would be greatly appreciated.

  Please visit http://status.adobedps.com/ and http://forums.adobe.com/thread/1175754.

  Neil

• Help! Dreamweaver keeps automatically 'putting' my model on the server every time that I save it.

  For some reason, Dreamweaver retains automatically 'putting' my model on the server every time that I save it, replacing the model that was originally there and I don't know why. It is never used to do this, and all my other sites work fine and do not have this problem... I don't want that to keep overwrite files I have on the server... does anyone know how to stop him from doing this you? I would greatly appreciate any help that anyone can give.

  If it helps, I'm using CS4.

  Thank you

  Catherine.

  Ok.  It looks like an incomplete installation.  Nevertheless, DW think that you have a local test server.  Every time that you save the files, he put copies in your C:\Users\Catherine\Pictures\tailormadeart folder.

  Except if you create dynamic web sites that use databases and scripts server side, you don't need a test in DW server.  All you need is a Local site and your remote server.

  For static HTML sites, I recommend you remove or clear the definition of testing server.  See screenshot.

  

  Nancy O.

• Error message during the download of dreamweaver for Business Catalyst Server model

  I have created several models of Dreamweaver and I get an error message when I try to upload to the server of business catalyst. I created a very simple model with the basis for this code and it will not download.

  I use Dreamweaver CC 2015.

  Here is the error message.

  Path is: /Templates/template-mar9-basic.dwt
  Models: model-mar9 - basic.dwt - error - FTP an error occurred - cannot put the model mar9 - basic.dwt. Access denied. The file exists may not, or there could be a permission problem. Make sure you have permission on the server and the server is properly configured.

  Activity of the incomplete file. 1 file (s) or folder (s) have not been filled.
  Files with errors: 1
  Models: model-mar9 - basic.dwt

  Business catalyst support told me to contact the support of Dreamweaver.

  You close DW & restart your computer yet?

  Nancy O.

• CLIQ XT: Phone no longer sees photos or audio files

  After a reboot, all of a sudden my phone shows no media on my sd card.

  Gallery shows all zeros, music app says no music on sd card, videos do not appear as

  I put the card in a reader and the pc sees all.

  I copied all the files on the computer and let the phone re - format the card and then copied all the files on the card, still nothing.

  If I download a 3rd party app to see the photos you can see, I can even see in the quick Office, cannot the native phone application, ranging from the camera to the Gallery shows nothing.

  I even did a factory reset on my phone and it did not help either.

  I tried using other sd cards and copied the files and still nothing.

  I thought that maybe all the files were hidden under properties, I checked, is still invisible to the native phone apps.

  I would really like to be able to see my pictures and my music and use my own ringtones, without using any 3rd party applications.

  I have beautiful widgets installed and he sees his own clock and icons of the weather on the card sd and other applications which have data stored on the sd card see of its own data very well, just all the images and audio files can't see the phone.

  Does anyone know what I can do to fix this?

  I now seem to have it fixed.

  There was a file named .nomedia, I deleted my sd card and all my media is now visible again to my native apps for phones.

  I don't know what this file was for or how it on my phone, but I'm happy again

• E4200 no longer sees my 1 TB Iomega external hard drive

  Hello - I got an Iomega 1 TB external hard drive connected to my router E4200.  I got confgured actions and they have been correctly running on the network.

  As of yesterday, all that has stopped working. The router does not see the disk; It is as if she is not plugged in.

  I rebooted the router and it still does not work.  I connected the hard drive directly to my PC to check that it works, and it does.

  The router is running Ver.1.0.03 (Build 14) of the firmware (the last).

  Any suggestions?

  Thank you!

  OK - I found a place to move my files and did a re - format drive.  Now he sees the player very well!

  Yes.

• My PC no longer sees my HP Photosmart C4340

  My situation recently:

  I had the HP Photosmart C4340 long already. Good machine. I've never installed color ink cartridge since I never need color printing and use only black ink for black and white printing.

  I don't print much, only about 3-10 pages per month, but I still need this small print (Laser printer or all-in-one is too big for me).

  Its always the same says display: error. Print cartridge is damaged or missing. The green light continues to blink and the machine can never be controlled only from my computer but its buttons. Normally, the machine can print in black and white and scanning the computer. When the black ink is empty I just fill up again and continue my work normally for years.

  The problem:

  Several times in the past my laptop with Windows 7 said that he did not design it, but after a reload of the computer or turn on the printer, all the problems have disappeared until last week. Now, he does not see the printer and nothing helped.

  My question:

  What can I do to make my PC with Windows 7 review the printer?

  Best regards

  Annatol.

  Hi Annatol,

  I understand that you have a problem getting your printer works with your computer again. I'll try my best to help you solve this problem. In this document for 'unit was not found HP imaging device' displays when analysis of messages in Windows are steps that may solve your problem of communication.

  In this document for "Incompatible cartridge" or 'print cartridge is missing, improperly installed, or not intended for your device' Message appears on the computer are steps which can resolve your ink cartridge error. HP does not support ink cartridges refilled and this problem can be resolved by the purchase of genuine HP ink cartridges.

  I hope this information can help, let me know how it goes.

• My windows media player no longer sees my flash drives or portable players for synchronization.

  This has never been a problem before. I tried several cards without success. other media programs see the card, but not windows media player. Computer TRhe himself sees the card as well.

  Im running windows 7 and of course media player 12. Of Macedonia Ive system restore, shut down the media player and turn it back on nothing.

  OK, the RCA player finally started working after that I discovered that its pilots were in need of update. But it's something, I tried on all these points, including readers of thumb without success so far for some reason any. Cela and swearing and threats of physical violence against the computer, it finally seems to work again. Since there was no clear reasoning for this failure or mysterious recovery, I'm sure hurt being here again with this same * problem.

• 13 under El Capitan elements no longer sees my camera

  Updated my iMac with El Capitan today and I tried to use 13 elements Organizer to import my photos from a Canon Rebel camera, as I have many times in the past (of which there are two days).  However, now things don't see my camera.  The "get Photos from:" drop-down list remains empty (< none detected >).  Photos Apple application sees the camera and starts automatically, as she normally does.  But no matter what I do, Photoshop Elements does not see the camera.  I also tried on my MacBook with the same results under El Capitan.  Any suggestions?  I was able to load my photos using Apple's Photo app and exporting so I could read in the elements.

  This work around for cards SD high capacity (64GB & more) does the job for people using Photoshop and import with bridge.  It may work for the EP as well

  (1) Insert the SD high capacity in a card reader connected to your Mac.

  (2) insert a USB key which has sufficient capacity for the files you want to download

  (3) copy the files from the SD card on the memory stick

  (4) open Bridge (or organizer PSE?)

  (5) click on Files | Get files from camera

  (6) select the USB key on which you copy the files

  Bridge reads the files and is completely functional - able to rename files, convert them to DNG, delete them when finished. etc. Maybe the same thing will happen with PSE.

  A PITA that you add the step of copying the files on the memory stick, but it's running.

• Dreamweaver no longer opens. Error said "Adobe Dreamweaver CC 2014 has stopped working" and stops later.

  I use this software very well for about a year or two. Today I started to receive the error message in the title. I tried to delete the cache file, rename the config folder, delete the config folder. No luck. Also, I reinstalled during the previous installation that does not work yet. So I uninstalled, rebooted and then installed again. Even if the re-Setup seems to go well, when I run the application that I continue to make the same mistake. I also tried holding alt + ctrl + shift while launching the application. Nothing happens.

  The complete error I get regularly is:

  "Adobe Dreamweaver CC 2014 has stopped working: a problem caused blocking the program working properly." Please close the program. »

  I'm on a laptop 64 bit Windows 7. It is a working machine and my support to my company Department does not support for this application. I learned to communicate directly with Adobe. I don't have the full suite of CC. Just Photoshop and Dreamweaver.

  Any other ideas besides those that I mentioned, I tried already?

  If the license has expired? Is it possible for me to check that outside of the application because it will not open?

  Thanks in advance for any help.

  Harlan CAyetano says:

  If the license has expired? Is it possible for me to check that outside of the application because it will not open?

  Go to the main Adobe site and log in using your identification code Adobe select Manage account. And then under the Plans and products, select manage the Plan. He will tell you at the end of your subscription.

• I am on a network to change the code on a web server in my office. CC of Dreamweaver no longer answers.

  ... Whenever I record. The change is made, but the program freezes, whites, and I have to stop it in the Task Manager... FOR EVERY SINGLE CHANGE THAT I DO. I am ready to return to DW CS5. Is this a common problem? Am I missing an update? Is this possible with CC?

  HI Nancy O

  I wanted to update you. I uninstalled and reinstalled DW. The first time I open a file after the launch and save it, it hangs still room for probably 4 or 5 minutes. Then, it seems to work. Any subsequent cases are slow but within 1-2 minutes, and local files are now saved almost instantly. I don't know if it's a good solution, either because of sentencing to reinstall the software, or if it is acceptable to always wait that long to save the files, BUT at least that happens. It is a bit painful, and I hope that Adobe prioritizes these issues quickly.

  Thanks for your help!

  Traci

• Hand coded CSS, Dreamweaver CSS, long hand, short hand CSS palettes?

  I am new to CSS and coding by hand am and my hand coded CSS works but I got it from a book and it was coded in hand short syntx.

  I tried to write the CSS in Dreamweaver and it dose not work... so I tried using the palettes of DW that dose also do not work.

  I think the DW dose does not have the background color and background image at the same time but hand coded thi is also not allowed why?

  / * My HTML code * /.

  < ! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd" > ""

  < html >

  < head >

  < title > < / title >

  < link rel = "stylesheet" type = "text/css" href = "test.css" / >

  < / head >

  < body >

  < form id = "comment form" action = "/" >

  < fieldset >

  < label for 'name' = > name < / label >

  < input id = "name" type = "text" / >

  < / fieldset >

  < fieldset >

  < label for 'Email' = > Email < / label >

  < input id = "email" type = "text" / >

  < / fieldset >

  < fieldset >

  < label for 'comment' = > comments < / label >

  < textarea id = "Comment" rows = "10" cols = "10" > < / textarea >

  < / fieldset >

  < / make >

  < / body >

  < / html >

  / * My CSS that works * /.

  fieldset #comment-entry form,

  Comment # form textarea {} fieldset

  width: 400 PX;

  padding: 5px;

  -font size: 1.4em;

  border: none;

  background: #e2e1d7 url(img/input-bg.gif) top of horizontally to the left.

  }

  / * CSS that the dose does not work * /.

  fieldset #comment-entry form,

  Comment # form textarea {} fieldset

  Width: 400 PX;

  padding: 5px;

  font size: 1.4em;

  background-color: #e2e1d7;

  background-image: url(img/input-bg.gif);

  background-repeat: repeat-x;

  background-position: left top;

  }

  Hello

  I forgot the explanation (it's the problem with cut - paste - post).

  In the dreamweaver dialog box to select all the items, but if you start to type ahead of the dialog box displays the following selections do not appear.

  Try adjusting the delay time of code hints in your preferences.

  PZ

• BI in 12 is no longer default blank model format in pdf format

  Model formats fore left empty in 11i used by default in PDF format. In version 12, this is not the case. Tested internally and it default to EXCEL with the execution one request competing bi. Is there a way to make blank default formats to PDF?

  Try to set the ' FND: default Template output Type ' profile for 'PDF' option.»