drive not ready _ stopped system

Similar Questions

• Drive not ready. Have you ever seen this happen before?

  I'm new to vmware and I have installled just vmware tools for I can have a full screen. Now whenever I'm starting my Ubuntu VM (my only), I get this message:

  "Tvmware - vmx.exe - drive not ready".

  The drive is not ready for use; its doors can be opened. Please check the A: drive and make sure that a disk is inserted and that the door is closed. »

  I can click on Cancel, Try Again or continue. Each option takes me to the same place, namely my Ubuntu vm... It is not cause real problems I know. It is more an annoyance.

  So has anyone seen that happen before or know how to fix? Thanks in advance!

  Welcome to the community,

  Take a look at the virtual machine settings and disconnect the virtual disk. If this does not resolve the problem, please provide the latest vmware.log file of the virtual machine file. Maybe this can help.

  André

• drive not ready message "the drive is not ready for use check the a drive, etc.".

  as soon as I connect my camera to transfer the photo I get following message

  The drive is not ready for use: the door can be opened. Please check the a drive; and make sure that a disk is inserted and that the door is closed.

  I can't get rid of this meaasge if I have to cancel it reappears 10 seconds later it just won't close very boring

  Hello

  What is the number and the model of the computer?

  You have the computer floppy drive?

  Were there any changes made on the computer before the show?

  Follow the steps:

  Method 1:

  Remove all external devices connected to the computer such as printers, scanners and external USB hard drive and check if the problem persists.

  Method 2:

  Check the BIOS setting and also, I suggest you to update the BIOS. To update the BIOS, contact the manufacturer or the manufacturer of the access Web site.

  Note: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• Windows drive not ready

  plurarite of windows disc is not ready

  Hi Superolga18,

  ·         You did it of any material changes or software on the computer before this problem?

  ·         Exactly when you receive the error message?

  You try to run chkdsk on the computer and see if the problem still occurs.

  How to perform disk error checking in Windows XP

  Hope the helps of information.

  Please post back and we do know.

• bug: 'drive not ready' which was already fixed bug is back

  When you try to start VMware so that you have mounted a vmdk with vdk.exe jobs appears an unnecessary error message / false.

  It is harmless but annoying as it prevents automatic start of virtual machines

  The bug was present in the earlier version but had been fixed with 6.5.0, if I remember correctly.

  Now with 7.0.0. He's back.

  Whereas from VMware seems to check all drives available - and it merges if it finds something unexpected.

  Suggestion: ignore all this. It is not really important if a vmdk is mounted everything by starting the workstation.

  See screenshot of the error message-
  
  ___________________________________

  VMX-settings- VMware-liveCD - VM-infirmary

  Maybe this indication could be useful for you: http://pavlovich.org/musings/?p=3

  ---

  Paul Svirin

  Software developer StarWind ( http://www.starwindsoftware.com )

• When I copy to the disc, I get the following error message: Windows – drive not ready

  Below it this box is a red emblem with a X white.  The message is: Exception Processing Message c00000a3 parameters 75b6bf7c 4 75b6bf7c 756bf7c and option buttons here's this message: Cancel try again continue no matter which option I choose, the box disappears for a few seconds and comes back with the sound "attention".  I am usually able to to copy, but sometimes the file will freeze when I try to use the data.  I can't close the message box.  Anyone know what is the problem and how can I fix?

  Hi tbenton1946,

  What application you use to burn the data?

  What is the service pack installed on your computer?

  1. you can access the link below and run the automated Troubleshooter to fix the CD and DVD, read and write the questions and check if it helps.

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  2. try the steps from the link below: how to troubleshoot problems that occur when you copy data on a CD - R or CD - RW optical disc in Windows XP:http://support.microsoft.com/kb/324129

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error - DRIVE - no IS NOT READY - the SYSTEM IS STOPPED after having installed a hard drive.

  Original title: need HELP just installed new HARD DRIVE.

  I adjusted has installed a new drive WD Desktop Hard in a Pent III; TRIED to raise the HD; computer and then tells me that the TRAINING SYSTEM - no IS NOT READY - IS INTERRUPED. I checked all cables & connections; & Yes by turning the hard drive. What am I missing or very probably wrong. Any HELP.  Sincerely of Merlin

  Hi Merlin,

  Thank you for the information.

  Have you tried to run a check disk from the BIOS (Basic Input Output System)? If this isn't the case, you can try to do a hard drive from the BIOS test & see if the problem still occurs.

  If you are not comfortable with the BIOS, you you contact the manufacturer of your computer for help.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Battery, not supported by the system and the display driver stopped responding with Dell Inspiron 1564 laptop

  Hello

  I had my laptop dell inspiron 1564 about two months ago and today when I turned on my laptop a message appeared on the screen the battery is not supported by the system . Can someone guide me through this question please?

  I have another question as well... the second day of my purchase of this product, that the screen is empty, n when I tried to turn on the key to the power of the laptop, a message appeared that the display driver has stopped responding earlier and it happened recently in a few days back as well. I will be very happy if someone can help me please on these two problems. In the hope of a solution in due course.

  Thank you

  Amira.

  2 months old?

  It is under warranty.

  Contact Dell and file a claim of guarantee on their records. as it may be the precursor of coming problems with it.

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_technical_support

  See you soon.

  Mick Murphy - Microsoft partner

• After the 24 Firefox update, Windows 7 64-bit breaks on reboot. The network in the taskbar icon is not ready (blue circle stopped).

  After 24 of Firefox update, Windows 7 breaks after the reboot. The network in the taskbar icon is not ready (blue circle on the wireless network icon). But I can't do much. I can't open the network and sharing Center (never opened). Even the Task Manager hangs when I click to show processes from all users. I have to do a system restore for a network working again. I never even launched Firefox.

  Wow... I finally have the solution. Windows updates have been applied at the same time I updated Firefox. Bluetooth driver is what broke (which is part of the Centrino wireless). I ended up installing the latest driver from Intel, Windows Update, and then update Firefox... and all is well.

  I thank very you much for all your help. Take care.

• NI LabVIEW driver for the SRS DS345 function generator generates error "(Hex 0xBFFF0011) insufficient location information or the device or resource is not present in the system."

  Hello

  We have a generator function SRS DS345.

  I just downloaded the driver NOR for the instrument on http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=E3B19B3E9149659CE034080020E748....

  After installation, the DS345 appears in MAX, and I can well communicate with him.

  However, if I run the srds345 to Started.vi, I get an error "location information insufficient (Hex 0xBFFF0011) or the device or resource is not present in the system" from initialize it with Options.vi srds345 sub - vi.

  The only change I did Exchange address GPIB 14 to 19, which is our function generator GPIB address. In addition, the

  Functions of SRS DS345 generator of function palette is empty, even after you restart LabVIEW (see attachment). I'm using LabVIEW 8.5.1.

  Your help in resolving this issue is appreciated. Thank you.

  Best regards

  Peter

  Have you installed the driver from LabVIEW or copied directly from inst.lib?

  The first is easier, and you don't have to restart LV more...

  Error in a not filled gpib address points. I have not checked if this driver has a resource name visa or a string of gpib address old but in the first case, try the little triangle on the right at the slect address instead of by hand.

• Cannot access the disk in the drive E:, please make sure that the drive is ready and the disk is not write protected.

  When I try to backup Quicken, I received the error: cannot access the disk in the drive E:, please make sure that the drive is ready and the disk is not write protected.  My last backup of Quicken was 16/07/2010.  I don't know why I can't back up now.  Is there a way to fix this?

  Why not save to a folder on your hard drive and burn them to a CD - R from there? I can't tell from the little you wrote if the problem is with Quicken (not work or you have incorrectly backup location) or with your CD - RW drive. How about more details to work with? This will give you an idea of what to write:

  The first Question of troubleshooting: If the problem is new, what has changed between the time things worked and the time they do not have?

  http://www.elephantboycomputers.com/page2.html#Tech_Support - See the article "how to write a Post.
  http://support.microsoft.com/default.aspx/kb/555375 - how to ask a Question

  MS - MVP - Elephant Boy computers - don't panic!

• (Redirected) Dell audio drivers will not load when the system is turned on for the first time after his stop.

  Dell audio drivers will not load when the system is turned on for the first time after adoption of Windows 10. I have to reboot every time. So what I'm doing puts the system into sleep. in this way, I don't need to stop and restart the system. It is Dell Inspiron N5559. Audio drivers are installed and up-to-date. Equipment works correctly.

  Hi akilesh.sharma18,

  Please repost this in the Audio forum from the laptop to help.

  http://en.community.Dell.com/support-forums/laptop/f/3517

• IOException: File system is not ready

  Hello guys '

  I have a problem. It's playback of files with the *.txt extension.

  Right now: net.rim.device.api.io.file.FileIOException: filesystem is not ready

  What is the problem here?

  long skipByteNumber = 800;
  
          FileConnection fconn = null;
          InputStream inputStream = null;
          try {
              fconn = (FileConnection)Connector.open(filePath);
              inputStream = fconn.openInputStream();
              InputStreamReader isr = new InputStreamReader(inputStream);
              long skipNum = isr.skip(skipByteNumber);
              System.out.println("Skip : " + skipNum);
              if(fconn.fileSize() > skipNum) {
  
                  int readlen = (int)(fconn.fileSize() - skipNum);
                  char[] readData = new char[readlen];
                  isr.read(readData, 0, readlen - 1);
                  StringBuffer sb = new StringBuffer();
                  sb.append(readData);
                  StringBuffer tmp = new StringBuffer();
                  int **bleep**num = 0;
  
                  ......
  
              }
          } catch(IOException ioe) {
              /*final String str = filePath;
              UiApplication.getUiApplication().invokeLater(new Runnable() {
                  public void run() {
                      Dialog.alert("File is missing : " + str);
                  }
              });*/
              System.out.println("Ex1 : " + ioe.toString());
              System.out.println("Ex1 : " + ioe.getMessage());
          } finally {
              if(fconn != null) {
                  try {
                      fconn.close();
                  } catch(IOException ioe) {
                      System.out.println("Close : " + ioe.toString());
                  }
              }
          }
  

  I found the error code. If your code uses InputStream object, u should close this object '

  Code:

  Ins InputStream =...

  ....

  ins. Clode();

• I just installed Windows 7 on a part of the Dell Vostro 1500, l features notebook.__In control, I have two mistakes "Device Base system has not a driver" __There is no driver installed for the Base system device. _ No fixed

  I just installed Windows 7 on a Dell Vostro 1500 laptop.
  In the pane control, devices of l, I have two errors "device Base system has not a pilot.
  There is no driver installed for the Base system device. Not fixed
  Apply the solution to the complete driver problem
  Install a driver for this device does not work

  Troubleshooting gives me two messages:
  The first is: there is no driver installed for the Base system device.
  The device information
  Name: Base system device
  ID: PCI VEN_1180 & DEV_0592 & SUBSYS_02281028 & REV_12\4 & 1F967EE5 & 0 & 0BF0
  Error code: 28
  The second is: there is no driver installed for the Base system device.
  The device information
  Name: Base system device
  ID: PCI VEN_1180 & DEV_0843 & SUBSYS_02281028 & REV_12\4 & 1F967EE5 & 0 & 0AF0
  Error code: 28
  I cannot locate a driver through web search - how do I know what are the devices? and where can I find a driver?

  Try to update the drivers using Windows Update.  If this does not work, try the versions of Vista of Intel and Ricoh under Chipset drivers on the website of downloads & drivers for Vostro Notebook 1500 . Make a restore point first.

• I am trying to open samsung pc studio and it givesme an error message and windows then told me my flash drive is not compatible with my system... this after I downloaded the flash player im told is compatible with my system

  I am trying to open samsung pc studio and it givesme an error message and windows then told me my flash drive is not compatible with my system... this after I downloaded the flash player im told is compatible with my system

  In general, when the desktop software uses Flash Player, it's because they're incorporating an Internet Explorer window in the application.  If you do not have Flash Player for Internet Explorer (aka. the ActiveX Flash Player) installed, then the desktop app is not going to work.

  Then, launch Internet Explorer

  Go here: http://get.adobe.com/flashplayer/

  Follow the prompts and then relaunch the application after you have completed the installation in Internet Explorer.  I hope this sorts for you.