drive seems to be missing

Similar Questions

• Satellite Pro A10 does not start (HARD drive seems to be missing)

  Hello, I hope someone can give me some advice on this problem: I have a 2 years Satellite Pro A10. Recently, it starts not at all and I noticed that if I look at directories on the C: drive using the command prompt, it said "file not found". Cannot start Windows at all, not even in Safe Mode.
  Using the recovery disks is I help spread messages as no such fixed disc and 'Extraction impossible '.
  is - that say I have:
  1 a hard drive damaged
  2. defective connections on the HARD drive? -If Yes, how I fix that?

  the system didn't crash before it happened, she doesn't have to load up when I started it.
  Would appreciate any help.

  Thank you
  SCL

  Hello

  Well, it could be a hardware malfunction of HARD drive. Yes, it is possible. But I don t think that there is a bad connection. You used this HARD over the last two years and you n t change the settings of connections on this HARD drive. Is this good?
  If it possible s so I suggest you of to completely format the HARD drive.
  Then try to start the recovery procedure.

  However if the HARD drive has a functioning default (ie. crushing of the head), so the only way is to replace this device.

• Some VPCSE Windows 8 drivers seem to be missing

  My VAIO, model VPCSE16FX, is supported by Sony to upgrade to Windows 8. However, some Windows 8 drivers seem to be missing:

  1. the video drivers Windows 7 are a combination of AMD & Intel drivers while the only driver video Windows 8 listed is "Graphics of Intel® driver." I know that there is a combo for WIN8, driver for switchable graphics. I do not know how to interpret this: Will Windows Installer the driver AMD? Must I download direct from AMD? Should I install the Windows 7 video driver instead?

  2. the other drivers are missing completely from the list of Windows 8; for example, no audio driver doesn't appear, which is a concern that I found that Dolby drivers are essential to make the usable internal speakers. Also conspicuous by their absence in WIN8 list are a number of drivers of Intel/apps as well as the driver for the Synaptics touchpad. I have the same questions here; WIN8 will install these missing drivers? Should I upload them directly from their manufacturers? Can I install the versions of WIN7 instead?

  Thank you!

  Hello
  Thank you for your message
  We know, it lacks the Windows 8 drivers, such as the AMD graphics driver, Audio driver and touchpad for your VPCSE16FX and this driver have referred for consideration.
  We recommend that you check back the Page drivers VPCSE16FX occasionally in the coming weeks, as many models is updated driver that will be posted soon.

• In the latest versions of FireFox, there's a display option which allowed a change in the size of the fonts and objects on the screen temporarily on the fly. This seems to be missing from version 6.

  In the latest versions of FireFox, there's a display option which allowed a change in the size of the fonts and objects on the screen temporarily on the fly. This seems to be missing from version 6. It was very useful and should be added to version 6.

  https://support.Mozilla.com/en-us/KB/how-do-i-customize-toolbars

  If you mean the - and + Zoom control so it is always there in Firefox 6.0

  or
  View-> Zoom

  Edit: I see that you are using Windows 7 where the menu bar is hidden as a Firefox orange button by default. Some menus objects much may not be visible in the menu of the Firefox button. Show the Menu bar or use the - and + Zoom controls buttons.

• WindowServer []: GPU Driver seems to be suspended (more than 5 continuous seconds of reluctance)

  Hello

  I have a huge problem with my iMac to year < 1 5K. It seams it is not capable of running tools. At least that is the statement that the Apple dealer gave me the excuse followed, I expect that Apple updated sound driver and hope that the problem will disappear.

  But one after the other. I bought this iMac I have a configuration with the best available (i7) CPU and 16 GB of RAM in April. When I asked if the least performing graphics card is sufficient to run application oll but games, they assured me that this is the case. Then all year there was seldom behavior with this mac, because after a while, he started to suspend for a period at the beginning a few seconds and after some time a little more until it becomes completely unusable because of the high frequency of gels. These gels has disappeared, especially when the focus of the application has been changed (cmd + tab), but come back more and more.

  The first thing I did, I even if this thing is broken and got a new logic board installed, but the ramains problem.

  After all, I discovered that the log is full of statements like:

  WindowServer []: GPU Driver seems to be suspended (more than 5 continuous seconds of reluctance)

  When the application is frozen. So I got the iMac to the dealer. Just today, they called me and told me that this problem is related to all THE tools of creation as Photoshop, but also of music like Ableton and same logic X programs! They told me I have to wait for Apple to arrive with a new driver of the logic board that hopefully solves the problem. I mean that literally, they confirmed that the iMac 5K is not able to run any creative Application at the present time for a longer while.

  My question is, what should people like me do, when the sole purpose of this computer was creative tools. Is there a program to switch to another machine like MacBook or Mac Pro or are the iMacs postum declared as not usable for creativity and buyers, and even less in the rain?

  Sorry, but my last post was so full of typos, I was really offset after the retail bank and need some time to get down. I'm sorry. This is a rewritten version, with most of the corrected errors:

  I have a huge problem with my iMac to year < 1 5K. It seams it is not capable of running tools. It's at least that the statement that the Apple dealer gave me the answer to my problem followed by the suggestion I should expect that Apple updated sound driver and hope the problem goes away.

  But one after the other. I bought this iMac with the following configuration: the best (i7) processor and 16 GB of RAM, Fusion drive and the simplest card in April.

  When I asked if the less powerful graphics card are sufficient to run all applications next to the actual 3D games, they assured me that this is the case.

  Then all year long this mac rarely showed a behavior. Initially, he started to suspend for a period of a few seconds and after some time a little more until it becomes completely unusable because of the high frequency of the freezes. These gels has disappeared, especially when the focus of the application has been changed (cmd + tab), but come back more and more.

  First I though that something is broken and brought it to repair apple, where I got a new board installed, but the problem remains.

  After all, I discovered that the log is full of statements like:

  WindowServer []: GPU Driver seems to be suspended (more than 5 continuous seconds of reluctance)

  When the application is frozen. So I got the iMac to the dealer. Just today, they called me and told me that this problem is related to all THE tools of creation as Photoshop and also music like Ableton and same logic X programs! They told me that I have to wait as Apple launches the new driver of logic board, which hopefully will solve the problem. I mean that literally, they confirmed that the iMac 5K is not able to run any creative Application right now for some unknown time - perhaps always.

  My question is, what should people like me do, when the sole purpose of buying this computer was creative tools. Is there a program to switch to another machine such as the MacBook Pro or Mac Pro or are the iMacs postum declared as not usable for creativity and buyers, and even less in the rain?

  I'm really curious since the sill site Web of Apple announced the iMac as a creative Monster.

• the drive seem to have been partitioned by another utility and cannot be erased

  I have a MBP with 2 SSD. Yosemite is running on the SSD that has been partitioned 1 TB to a 150 / 850 GB volumes.

  I wanted to install Windows 10 using Boot Camp but after succesfully download Windows software support that I can not go to the next step where I have to choose a volume (Pluto). Wizard Boot Camp shows my SSD and when I chose the following warning is displayed:

  "the drive seem to have been partitioned by another utility and cannot be erased."

  I see that Pluto isn't GUID and maybe that's the problem, but there are already some data on the volume of 850 GB that I can't erase. Is there a way to fix this without destroying the data? I don't even know why Pluto doesn't have GUID in the first place...

  Thnx,

  G

  

  You have two entries 'Pluto '. The outermost is a volume CoreStorage group, which has two volumes, one is named Pluto, the other is TerraNova. The 512 GB of Samsung is your second physical disk. The Pluto in the BC Assistant is the complete LVG, not only the volume of Pluto, which contains also of Terra Nova.

  BCA does not support such a configuration on your MBP. You will need to backup your data or manually partition the disk and do a little terminal work, if you want to install Windows in this configuration. The second SSD will complicate it further. You may need to physically remove the disk non-windows in order to install Windows.

  Your end of 2011 Mac does not support Windows 10 as described in using 10 Windows on your Mac with Boot Camp - Apple support . You will encounter problems of pilot.

• S.o.s. Keychain seems to be missing after that put 10.11.2 updated!

  I had some keychain problems since the 10.11.2 updated and decided that I would try S.o.s. Keychain but it seems to be missing from the menu. Anyone else seeing this?

  Yes, me too?  everyone knows this change?

• A range of editing seems to be missing a few options.

  It's so weird... I'm trying to add a library by editing a set palette (following the signs linked here). However, I seem to be missing a few options, namely the possibility of changing the set... What don't get me?

  I tried 'right click' everywhere to see if there are hidden menus. So far I have not found...

  I've attached a screen shot here.
  Thanks for the help.

  So it's fun... it seems that when Labview is spawning new windows containing editible functions... they caused partially off the screen.

  According to me, who did. Thank you.

• DVDRW driver is corrupted or missing

  I have a tss-ts-u633f dvdrw which won't work, say driver damaged or missing. Tried new driver down load that it did not work. I need help.

  Thank you

  Hello

  You don't specify your Windows Version. Please ask in the Forums of Windows of answers for your
  version of Windows.

  Answers - Windows Forums
  http://answers.Microsoft.com/en-us/Windows

  -------------------------------------------------------

  It's for Windows 7, if you have XP or Vista, please ask in the forums

  Code 39 means that the driver is corrupted or missing.

  -------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• HP Deskjet 3526: Received Message that ink "seems to be missing or damaged.

  Nice day.

  I received the message in cartridge "seems to be missing or damaged.  I bought and installed

  a new HP cartridge and the error message remains.  I tried blocking down and cutting off the current, but cannot

  do change.  Any ideas?

  Thank you

  George

  Hi @Gjedlicka1

  Sounds like the cartridge and the printer does not communicate. I suggest to remove the cartridges and contacts metal bit wiping on the cartridges. Also take a look inside the printhead to see if there is any obvious damage where the cartridges sit in.

  Here is a link to a document with instructions for troubleshooting (that's for a different model of printer than the one you have, but the recommended steps are the same): http://support.hp.com/us-en/document/c04313139

  Hope this helps, good luck

• Network adapter and the driver of the mini missing hp!

  Network adapter and the driver of the mini missing hp!

  I have a new computer, hp mini 210 and had to get windows 7 on it hard. Then I played the cd on it Windows 7 Home Premium, and there is no wlan more! He's now getting WARNING pilots are missing when I try to install it, it's the: no available network card what do I do?

  Netzwerk und Treiber von hp adapter mini there!

  I have a new hp mini 210 bekommen und windows 7 starrer is had. Dann habe ich windows 7 home Premium uber die cd is yet und're fand kein wlan mehr! ES kommt nun immer die Warnung Treiber wenn ich installieren is die there will be steht is: keine netzwerkadapter available was soll ich tun?

  Hello:

  Here is the link for the drivers you need for this card...

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5060882&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_105197_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• I had to restore my windows XP and my mail to my email account seems to be missing, but my contacts are intact.

  I had to restore my windows XP and my mail to my email account seems to be missing, but my contacts are intact. How can I recover my old emails.

  See www.oehelp.com/OETips.aspx#4 as the Bank of likely messages of lost.  If all goes well, he is still there.

  Steve

• my computer does not recognize the Device Manager cd/dvd/rom drive says corrupted or missing code 39

  my computer does not recognize the Device Manager cd/dvd/rom drive says corrupted or missing code 39

  Try following the steps under "Windows 7 or Windows Vista" in the MS KB article:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• HP Officejet 6700 Premium - printhead seems to be missing

  Seems to be a common problem with these printers - me too I got the error message "the print head seems to be missing, not detected or badly installed"-I tried all the suggestions of troubleshooting with no results.

  I have never had any problems with HP in the past, and since 1999 have bought only products HP - when things had to be repaired under warranty, that these were always made in a very quick way - HOWEVER...

  This time is a totally different story - please someone at - he found a solution yet or is that a case of replacing the printer - can someone help!

  Welcome to the @debz143 forums, I hope you're well

  I read your post about the error "Missing or has no print head", you receive on your Officejet 6700. If you have tried all the troubleshooting, including a power reset (see below), give us a call directly to see what your replacement of the printer or trade options are with HP.

  A "Missing or doesn't have a printhead" Error Message is displayed on the printer or on the computer

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Have a great Tuesday!

• RALink driver bluetooth pcie is missing in windows 8.1

  bluetooth does not work after update of windows 8 to 8.1, and the ralink pcie driver bluetooth display is missing. Help, please

  Hello:

  Here is the link to the latest Mediatek (Ralink) bluetooth driver for W8.1...

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D2%257CswItem%253Dob_130262_1%257CswEnvOID%253D%257CitemLocale%253D%257CswLang%253D%257Cmode%253D4%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken