Driver de CD DVD Writer model SH-S222
Hola
Tengo a problema, asunto el are voy a instalar a WiFi receiver y caja trae UN CD y mi CD-ROM no porque sucedio algo works con el driver y he tratado otros drivers instalar y not me works, alguna sugerencia o ayuda por favor linking?
Gracias
Hello
See this page to select your language:
http://support.Microsoft.com/common/international.aspx
====================================
Or sorry that it is area English.
Left click at the bottom of the Microsoft Community page
English and set your language.
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
Tags: Windows
Similar Questions
-
Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) has .dvd rw ad - 7530 ata
Hello
Code 39 means that the driver is corrupted or missing.
Please make all below even if you have done some before as it is often the set of operations which solves
the question.Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.
Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.--------------------------------------------------------------
Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
are you can reinstall the 'old'. Many use Windows default drivers however some special aura
ones. Also check the website of the manufacturer of the car.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHope these helps.
Rob - bicycle - Mark Twain said it is good. -
DVD HP dvd200i drive: HP DVD Writer dvd200i installation software
I removed my OEM HP DVD Writer dvd200i from HP Win XP machine died at a Win 7 machine. It is not recognized, so I guess I need s/w installation. Am I correct, and where can I get the s/w? I searched HP support and can't find any s/w installation it for HP DVD Writer dvd200i model.
What you need is not the installation software, but a driver.
To appear in Device Manager? If so, clidk right it and update driver. It must install at least one generic driver.
This isn't a young unit and unfortunately HP only provides drivers for it up to Windows XP. You try to install the driver compatibility by right click on the downloaded exe file then compatibility mode.
http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=81681&
-
My CD/DVD drive cannot read or write media.
I get a message to insert a disc, but it is already in it. When I reinsert the disc, I get the same message.
Hello
Looks like the drive has a problem, possibly a cleaning disc might help if he and the
below are questionable solutions to what sounds like a hardware problem.Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
-
CD / dvd drives will not read / write to any disk
Hi, can someone help (first timer) I have two cd/dvd drives will read / write to disk get them all is a window pops up asking me to insert the disc. all my drivers are up to date, my Device Manager shows two active drives and works correctly, I use service pack 2 and I have installed a new software/hardware. my computer is a dell XPS 420 that is now three years old and this is the first time that I had any problem that I have not been able to solve. Help!
Hello
Its not unusual for the same problem have an impact on both drives, in fact its very common.
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps and happy holidays!
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Need driver DVD writer for my Satellite L300
Hi guys that I really need help.
For some unknown reason to myself I have sewing to have deleted the drivers of my laptop DVD writer.
It won't play or write disks, I have tried every disk there.Its saying the _archive is missin or corrupt_,
I'm not sure that I now need to address this issue the drivers or so i ' l'll have to reset the settings of factor.* Can anyone please help, thank you *.
Optical disc drive using the standard Microsoft driver and there is no special driver for this device. Optical drive should be automatically recognized by the operating system.
What is the STRANGE situation in Device Manager?Of course, for getting new factory settings is simplest and easiest way to get it working again, and it can be done very simply - http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm
-
The DVD Writer driver is missing
Hello
I use HP Pavilion laptop g6 and it has the same windows 7 Home Edition I got when purchasing the laptop.
I inserted a DVD that had some photos, and then my antivirus has warned that there is a virus. I clicked on "move to the Vault", but he said something like 'located in the optical drive.
Now my DVD writer not bed not any disk. I tried to restart, but it was not successful. Device Manager says "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »
Help, please!
It seems that your antivirus has played a role in the present. What anti-virus do you use?
You had considered using the system restore Windows to upgrade the operating system of your laptop computer to a restore point dated to before this happened?
The following video shows you how to use the system restore. You don't need to go in Mode safe mode system restore is accessible from within a normal Windows desktop.
-
LG GH22NP20 dvd writer driver is unable to start on Vista
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- Programs ywhen I start my computer, the DVD Writer driver does not start.I checked my device manager and it shows up with an errorThis device cannot start. (Code 39) Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.and when I click on "Find solutions" it loads just a little while and then disappearsthe dvd is a LG GH22NP20
help would be greatly appreciated.ou have problems with
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
http://support.Microsoft.com/kb/982116/en-AU
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.Microsoft.com/GP/cd_dvd_drive_problems
See if the information above solves the problem.
See you soon.
Mick Murphy - Microsoft partner
- Programs ywhen I start my computer, the DVD Writer driver does not start.
-
My CD or DVD drive cannot read or write media
Both my cd/dvd readers do not read the discs, they say just please insert disc when it is already inserted.
Hi Metalmick,Method 1:Try running the fixit from the link provided below >
Reference:
Your CD or DVD drive cannot read or write media.
http://support.Microsoft.com/GP/cd_dvd_drive_problems
Method 2:
I recommend you to uninstall and reinstall the drivers and see if it makes a difference, also check the firmware updates.
You must be logged on as administrator to perform these steps.
a. open the Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
b. in Device Manager, look for the CD/DVD and then double-click the device name.
c. click on the driver tab and then click on uninstall the driver, and then follow the instructions.
Reference:
Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctlyThank you, and in what concerns:
I. Suuresh Kumar - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
-
driver se-208 samsund dvd writer for windows 8
I have a samsund dvd writer is 208 as worked well until I have install Windows 8 Pro. There is no software driver for windows 8?
If you can read data cd and DVD, it works well. There is no video dvd player in no win 8 and also no dvd burning software not included with windows 8. You need to find a video player. VLC is a free dvd player.
-
DVD drive - no read or write DVD + R discs, works with CD - R discs
XPS 410, XP SP3 Media Ctr
DVD + R/RW C - RW Combo Drive 'HL-DT-ST DVD +-RW GSA-H13N ".
Drive DVD-ROM "Philips DROM6316 DVD - ROM".My DVD player has been working flawlessly for over 2 years and all of a sudden, without apparent reason, is no longer read or burn DVD - video or data discs. After inserting a disk (blank or recorded) I get a message 'no disc' about a minute later.
This DVD Player PEUT read and write any CD - R disc, without difficulty, the problem occurs only with DVD + R discs.
My second drive, only a DVD-ROM works fine. And nothing out of the ordinary, as far as I know, on the properties of disk in the control panel.
Any help would be appreciated.
Message edited by zonie776 on 01/08/2008 17:32
-
DVD writer will not realize any sound recording
I can burn the video portion of the DVD very well, but there is no audio data. all retired to device mgr. When I run the HP optical drive test, get a 'mistake' contact support '.
Hello peter47,
There may be a problem with the DVD writer into the computer.
What make / model of computer are you using?
What operating system?
What program do you use to burn the DVD and have you tried multiple?
You can burn CD which is just audio or do they have the same issue? -
HP Pavilion g6-1310ex: HP Dvd Writer problem
Hello Sir/Madam
Please help me I have a problem in my DVD - RW drive when I insert a blank dvd shows 1.31 1.31 GB instead of 4.7 GB GB. What I can do. How can I solve this problem?
As for kinglord55
I contacted Princo technical engineer and I described the problem to him and provide him with my laptop model and other info, so he found the idea... their message for me is the following:
"We have investigated your problem and summarized our end as follows:
* Our DVD Slim 24 X is very thin, so that your computer laptop DVD - RW burner is recognizing our DVD Slim Mini DVD-R (8 cm 1.5 GB).* This can be happen because of the incompatibility of firmware DVD - RW writer or ancient writers of DVD - RW model.
DELL N5010 is little bit old model, we tested with DELL N5110 and most of the writers for laptop / desktop model DVD - RW and it gives excellent performance. Already said some model PC computer and other portable computers, he's working with a capacity of 4.7 GB. It's the same reason.
We recommend to contact your laptop vendor to update the firmware of your DVD - RW burner or try to use the new template writers. Reference DELL always have their latest firmware. »
I think that my DVD - RW is old as he said and will never recognize the slim DVD-R that I updated its firmware, but nothing happens.
Add I used another brand of discs that are not thin and it gives me the full capacity of 4.7 GB with no problems and that make sense and confirms the notion of engineering technique.
-
Where can I find a driver for cd/dvd rom for a hp compaq presario f700 laptop. ?
MY PILOT JUST DISAPPEARED AND I can't READ DVD, S or CD or BURN MUSIC /.
Hello
Check with HP, their drivers support and documentation online and ask questions in the forums on
known issues.Support HP & drivers
http://welcome.HP.com/country/us/en/support.htmlContact HP
http://welcome.HP.com/country/us/en/contact_us.htmlHP forums
http://h30434.www3.HP.com/PSG/=================================================================
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Save now don't read do not HP DVD Writer 1140r as recordable legacy
Save message now says no compatible recordable legacy found on the system. Do you have all the troubleshooting & uninstalled, restarted, new message material found, always the same. Legacy Bishop reading drive HP DVD Writer 1140r but Record now sees him only as a player, not registrable as it used to.
Hello:
I thought that maybe your model needed a storage controller driver so that the registration program could see the drive. But your PC will not need this.
Have you tried another DVD burning software program?
I love this one. It's free and easy to use.
Download the 32-bit version without Open candy (click on the blue, that more download link Options).
http://CDBurnerXP.se/en/download
Paul
Maybe you are looking for
-
Dynadock fit to the TV 3.0 does not not from Win update 10
Hello I'm having a problem with my Dynadock 3.0 since the upgrade to win 10. The adjustment to the TV won't work.The screen is now too large, I do not see the scroll bar on what whether when the window is wide open. I tried in vain to turn off was on
-
Some issues with the new facility on Satellite A100-691
Hello yesterday, I received the laptop from a friend of mine.He had a troyan horse program, so we decided to install everything again. We use the product recovery CD for the Installation of XP, then 'Tools & Utilities CD Rom', but there are now a few
-
What happened to the chapters in ATV4?
I used to be able to jump between chapters on ATV3 by now that the function went on the ATV4. If I slide up (where I see chapters for purchased videos) - chapters for my videos torn do not exist. Y at - it a fix/work-around? Thank you!
-
Design pattern using queues and notifiers and problem with sync
Hello I'm rearchitecturing a 4-channel data acquisition system which includes data acquisition, indexing of data between four channels, signal processing and recording of data. All processes are placed in a single loop, and I have subdivided by the f
-
700 - 210xt envy: adds browser
Suddenly my browsers have adds adds. Anyone know what is happening & how to correct? TIA