Driver: driver USB embroidery personalization VIP v6.2 system d/card reader/writer

Similar Questions

• Kit from d-card reader/writer driver for 4 d

  Hello, I install 4 d embroidery on my pc, I did all necessary updates, I try to connect my recorder to map to embroidery pour put my creations, this always says that there is nothing of connector. I see my recorder in my devices and I install tests but he tells me that there is no driver install on my pc. I don't know what to do please help me.

  Thank you! Lucy...

  Hello

  See this page to select your language:

  http://support.Microsoft.com/common/international.aspx

  ====================================

  Or sorry that it is area English.

  Left click at the bottom of the Microsoft Community page

  English and set your language.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Windows thinks flash drive memory card reader - will not let me import the photos.

  I have Windows XP on my lap top. When I plug my USB memory card reader, Windows thinks that it is a flash drive, and if I try to open it, it just says: "insert in the drive. There is no drivers for the memory card reader - it was designed that way, I think. The memory card reader used to work fine with my laptop, but no more.

  Can someone tell me what's happened and how to fix it? Thank you.

  I have Windows XP on my lap top. When I plug my USB memory card reader, Windows thinks that it is a flash drive, and if I try to open it, it just says: "insert in the drive. There is no drivers for the memory card reader - it was designed that way, I think. The memory card reader used to work fine with my laptop, but no more.

  Can someone tell me what's happened and how to fix it? Thank you.

  ====================================
  Just guess... could this be a hardware problem?

  If you have more than one port... try USB to another.

  Maybe you can connect the camera to your laptop via
  USB cable and see if you can download your photos.

  Maybe the following article offers some ideas:

  (310575) advanced troubleshooting tips for
  General problems of USB in Windows XP
  http://support.Microsoft.com/?kbid=310575

  Good luck finding the solution.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• external usb card reader will not read anything beyond 2 GB cards

  my computer is running Vista Edition home premium 64-bit.  When I plug my digital concept 51-in-1 play/recorder card the computer will recognize, if I put in my mic of 1 or 2 GB sd he sees.  But if I insert anything bigger that that the computer sees the card, it does nothing.  So I don't know the card reader works.  I have another computer running the same OS but 32 bits and I have no problem at all.  Could there be a problem with the 64 bit?  Please help... very irritating!

  What is the EXACT make and model of drive?  It is Digital Concepts CR - 75 USB 51-in-1 Card Reader/Writer (if not, why)? So no matter where you had drivers, firmware or software for this devicce or did you just plug it and expect it to work with anything else required (which may indeed be the case, but I suspect not - I just want to know if you have anything to make it more compatible with the system).  Where did you get these files and where is the technical support (web site help - is it Sakar, http://www.sakar.com/contactus.aspx?)  If so, consult the following site:http://www.bestpriceaudiovideo.com/digital-concepts-cr-75-usb-51-in-1-card-reader-writer/.  You'll notice that it includes Vista as OS compatible.  Yes, I know, is to find work on the other Vista machine and it works even partially on this one - but he may still have some problems. "

  I would contact Sakar support http://www.sakar.com/contactus.aspx and discss the issue with them.  They have a simple solution, or they can tell you that you need to install some additional things (and I hope that tell you where to get them) or they can say that there is a problem with Vista 64-bit.  In any case, they know better than we do, and since you are 'install' as plug-and-play, then the issue is not Vista but the device and/or drivers, firmware, or software required for the unit (even if this wan't necessary in Vista 32-bit computer) of the product.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Y50-70 - USB Reader and card reader no longer recognized

  I have Lenovo Y50-70 (running Windows 10) and my WD My Passport Ultra external drives are more recognized (they worked fine until 3 days ago). My card reader CF is no longer recognized either. My Samsung Galaxy S5 works well.

  The WD My Passport drives Ultra both my card reader still work with my older ThinkPad, which works in Windows 7. This isn't a disc problem, or a cable problem.

  When I look in devices and printers, the WD My Passport Ultra appears. It has the following warning sign for troubleshooting option. When I troubleshoot it comes back telling me that the driver is not installed. Continuing, he finds the driver, install it and asks to restart the computer. After the computer restarts, the drive still does not appear.

  When you look at the properties of the drive, it says that the driver is not installed and an error code 28 the list.

  Comment to Moderator: The model is added to the object for clarity.

  fgossieaux wrote:

  Thanks Bill - Sorry for not being specific. Both my WD drives (which have no external power sources) that my card reader does not work. I tried to remove the drivers and rebooted the computer, but none of it works.

  You can try to restore to a date (three or four days before the problem) and see if you have the problem solved.

• External hard drive USB on Time Capsule

  Hello

  I have an external USB hard disk and plug it into the USB port of my Airport Time Capsule makes it accessible wireless (if on the sidebar of the window under the section 'sharing' I click on the Time Capsule to enter airport name next to his record 'data', I also have a folder with the name of my USB HD and I can access).

  Now the problem. I have a USB external hard drive, I can access normally connect my iMac or iBook portUSB one, but, if connected to the time Capsule... nothing happens.

  So there must be a difference in the two external hard drive. What a difference creates the problem, why and what I can do is my question.

  Can someone help me?

  So far, here is what I found to be the similarities and differences:

  The two serial ATA, 2 to, partition GUID mapped external USB hard drive.

  In disk utility, one that is visible on the Time Capsule is displayed as 'external HARD disk support' physical disk with OS X extended physical volume. One who isn't appears as physical disk 'external media' with logic extended OS X volume.

  TX

  Hi Ranmaboy,

  I understand you have two external hard drives USB that you want to connect to your airport Time Capsule via USB, but one who is not recognized by the Capsule from the airport. Given that this player connects to your iMac without problem, I would recommend that you backup all data stored on the disk, and then follow the steps here to re - format the drive using disk utility:

  Backup disks, you can use with Time Machine - Apple Support

  Format a drive connected to an AirPort Extreme 802.11ac or Time Capsule

  If you are using an AirPort Extreme 802.11ac or Time Capsule, you can connect an external drive to the USB port on these devices for use with Time Machine. Follow these steps to reformat the hard disk in the first place, it is ready for use.

  1. Connect the hard drive to a USB port on your Mac.
  2. Open disk utility.
  3. On the left side of the disk utility window, select your external drive (or one of its partitions).
  4. Click the delete or delete button on the toolbar.
  5. On the Format menu, choose Mac OS extended (journaled).
  6. Type a name for your drive, and then click clear.
  7. After that the drive is deleted, close the disk utility window.

  Once the disk has been reformatted, try to connect this back to the airport Time Capsule to see if it is now recognized.

  Have a great rest of your day!

• New driver USB on my laptop Portege of loading

  I have problems with a site I subscribe to who went through an upgrade.

  The website said that the problems were because he was a blocker adware on the cell, preventing the load correctly the site.

  I deleted all suspicious looking for programs, and although the site now works perfectly when I go to eject a USB device instead of seeing the listed devices I see...

  To work around this, I tried to reload the driver USB from Toshiba, but I get the following message:

  A later version of Renesas Electronics USB 3.0 host controller driver is already installed on the machine.
  The implementation cannot continue.

  I need to remove the driver completely then re - install?

  > when I go to eject a USB device instead of seeing the devices listed, I see...

  I'm afraid that your message isn't clear enough of m.
  What problems do you have exactly with USB ports?
  You can use all the USB devices connected to USB ports?

  What Portege laptop and how Windows system you have exactly?

  The USB driver that you found seems to be already installed on your laptop and the new facility isn't necessary.

  However, please answer my questions above for more information on the issue.

• Mini Toshiba external driver.usb 2.0

  I bought a mini PC 7 android.
  I also bought a mini external pilot, when I put the USB in the mini PC
  It connects fine to the TI says it is u-disc. It's a (mini Toshiba external driver.usb 2.0)
  I put a few pictures to test, but he says always the same.
  in the settings it says (not available)
  could you please help me
  Thank you

  system: mini PC 7 android
  version 2.2
  kernel version 2.6.32.9 - default
  build number froyo generic - Eng2.2 ver1.5.5 - 20110920.103830

  Hello

  Do you have the same connection error an another USB 2.0 external HARD drive or a USB flash memory stick this laptop?
  Test this
  Maybe this problem of HARD drive.

  USB 2.0 provides a power of 500 my if an external USB HDD or USB device needs more power, a problem may appear.
  In such cases its recommended to connect a USB hub with an external power supply between the laptop and the USB device

• problem with driver usb controller pavilion g7

  I need driver usb controller pavilion laptop g7

  PCI\VEN_184B103C & REV_03\3 & 2411E6FE & 1 & 80

  PCI\VEN_184B103C & REV_03\3 & 2411E6FE, 1 & 81

  Hello:

  You must install the AMD chipset driver and reboot.

  You want the first file on the Web page.

  http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

• Need driver USB 3.0 for my Satellite L755-1J9

  I'm from the Spain and after doing format C: in my Satellite L755-1J9, I can't install the driver USB 3.0 instead of Toshiba drivers download in this Web page.

  Someone who has this driver can help me please?

  Hi Enrique

  According to the specifications of the computer laptop your machine was shipped with preinstalled Windows 7 64 bit and this original recovery image contains all the necessary drivers, including the driver of USB 3.0.

  The question is: what did you do exactly? Did you install original version of the OS that you got with your machine or clean version of Windows and which one.
  If you're still using Win7 64 bit driver for USB 3.0 you can find here.

• Satellite A30-514: no driver USB

  Hello, first post here so be gentle please...

  Just re-formatted your laptop Satellite of friends as he managed to corrupt the windows, but we have not formatted to a non-original disc so no drivers etc - my problem is the USB driver. I'm using this link USB Driver
  Microsoft Windows 2000 5.1.2600 support page, but I cannot get his execution.

  When I click on it or run I get a set of icons, but none of them are setup etc., and when I click on the icons of all kinds of strange data appear.

  To sum up: no driver USB; has got the folder but cannot run files - help me please :-)

  Thanks - Mamoun

  Post edited by: Mamoun

  Found http://askiris.toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=ex&bbid=bb55&url=& dialogid = 11350459 & stateId = 1% 200% 2011352178 on the forum here and it works - thank you. BB

  Hello

  Thanks for the information and it is nice that you have solved the problem.

  PS: Welcome to our community ;)
  Good bye

• Need Driver USB for Satellite A30 921

  Need Driver USB for Satellite A30 921.
  I can't find.

  Please help me

  To be honest I really don't understand why you need the USB drivers?  :|

  Is it all the USB drivers are one included in the OS. It s no matter what operating system you have. Win XP or Vista.
  Operating systems use the own Microsoft USB drivers and installation of the USB driver is unnecessary. By the way; There is no 3rd party USB drivers ;)

  So now, it would be useful to know what operating system you have installed.
  If you are using XP then you should install SP2 and should update the operating system to the State.

  Furthermore, you shouldn't t forget to install the utility of chipsets Intel (pilot).
  You can find these drivers on the European driver Toshiba-> Sat A30 page area download.

  Hope that this information could help you get the USB port works again

• My flash drive which was a backup of my system windows has been accidentally immersed in water. When it is dry can still be used without destroying my USB port?

  My flash drive which was a backup of my system windows has been accidentally immersed in water.  When it is dry can still be used without destroying my USB port?

  Hello

  Put it in a bag of rice for a few days or more. -seal the bag.

  If you remove all the moisture, it shouldn't affect the USB ports if nothing is
  possible. Usually it is not a problem if the moisture is removed.

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• sick it be an app or driver USB available for down load Martin Light Jockey?

  OT: SERATO & Martin Light Jockey.

  Is simple, every time I get the upgrade is a problem, not so much with SERATO, but with Martin Light Jockey, it is difficult to obtain the application for the new high grade, I make a living on the programming of lighting and as much as you (Microsoft) make changes is a scramble for weeks or months also

  Is great that up grade and is simple for the majority, but the PC by far for me is better than MAC, I go to always give props, but my question is: is there an app or driver USB available to down load Martin Light Jockey on your new high grade with out need to have someone make you a BETA version be available or (Microsoft) will take care of those who use the items here daily life

  Hello

  What version of Windows are you using?

  LightJockey2 is compatible with Windows 7 and Windows 8.  Check the compatibility of the software in the Windows Compatibility Center.  Just type the name of the software in the search box.

  http://www.Microsoft.com/en-us/Windows/compatibility/CompatCenter/home

  Ex: compatibility Serato

  Software (s) compatible with Windows 8.1 is compatible with Windows 10.  But, as I said above, use the Windows Compatibility Center.

• No drive letter for USB PCMCIA card reader

  I use a card reader Addonics AEPUDDU Digi - PCMCIA (USB for PC connection) drive with a desktop XP computer.  Now, when I plug in any card memory PCMCIA (I tried several), the card reader recognizes the insertion of the card (the Green led lights up), like the PC (the icon appears in the system tray), but it does not affect no matter what drive letter to the map, so I can't access it all (through Windows Explorer).  If I click on the icon to eject, I get the usual pop-up message ("Remove USB mass storage device"), still only refers to a drive letter.  Clicking on this message gives the 'Safe to Remove Hardware' popup normal.

  Moreover, this habit of work very well, and then several weeks ago began this strange behavior.  Some days it works OK, a few days would not work.  Sometimes restart would fix it.  Today, it doesn't seem to help.

  Why XP will not assign a drive letter to this device, and how do I fix?  Thanks for any help or suggestion...

  Moreover, this habit of work very well, and then several weeks ago began this strange behavior.  Some days it works OK, a few days would not work.  Sometimes restart would fix it.  Today, it doesn't seem to help.

  Assuming you are trying to read of the same type and media memory size that used to work and other USB devices plugged into the same USB taken work, it seems that the device failed.  That means Addonics offers technical support?

  I guess that you tried to connect the unit on different USB Sockets.

  Open the Device Manager (start > run > devmgmt.msc > OK).  I don't know where this device will be displayed.  Look in the hard drives and the Bus USB controllers.  Are there error icons?  If so, double-click the name of the device and see which appear under the heading "status of the device.

  If nothing is reported as bad, it is possible that uninstalling and reinstalling might help.
  Double-click the Device Manager entry and select uninstall.
  Then disconnect the device and reboot.
  Then plug in and let Windows recognize it and install it.