Driver HP 2000 Notebook PC - DVD-RAM missing UJ8D1

Similar Questions

• Media in the CD/DVD drive is not readable (MATSHITA DVD-RAM UJ - 841S)

  my email

  Hi mohammedhamass,

  You did it all change hardware or software on your computer before this problem?

  You can follow this link completely & check if it helps.

  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD

  Hope the helps of information.
  Please post back and we do know.

• Portege A600 - need driver for MAST * A DVD-RAM UJ 862AS

  Please, where can I find the driver for:

  CARPET * A DVD-RAM UJ 862AS

  Thank you in advance.

  Sabre - Italy

  Hello

  Why do you ask for it? The drive is not visible?

  I mean that the driver is not required for ODD (optical disc).
  Windows uses the Microsoft own driver who is still part of the Windows System.

  You see a yellow exclamation point in Device Manager?
  I recommend the removal of the STRANGE in Device Manager. Then, you will have access to the registry and should remove the Upperfilters and Lowerfilters completely from the following registry key values:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  After that, you have to restart the device.

  Check and I think that the STRANGE should reappear.

• Need driver CD/DVD RAM for Satellite L20 - 206

  Could someone please tell me where I can get a download of the driver for the carpet * a DVD RAM UJ - 841S?

  Hello

  just a quick question: why do you need drivers for a player that is automatically recognized by windows and doesn´t need to separate all drivers?

  If your reader is not working properly, then there may be another reason for. Have you encountered problems, which then you lead to the conclusion to the research
  for some drivers?

  welcome them

• Satellite P30 - DVD-RAM drive will not write DVD

  I have a Satellite P30 - 145 running XP Home Edition with a carpet * a reader of DVD-RAM UJ - 831S. I am able to read and write CDs and read DVDs, but am unable to write DVD. In 'My Computer', the drive is marked as a DVD - RAM drive, but if I insert a DVD r or DVD R, the label changes to CD drive, and I am not able to format the drive, I just inserted.
  Clues as to what is happening and what I can do about it?

  Hello

  Since when is this problem here? Is your unit pre-installed with your own operating system or with the recovery image? DVD - RAM Driver Software V3.1.0.0 is also pre-installed correctly? Burning application you are using?

  Try to remove the drive from Device Manager, reboot the device and check if the drive is recognized correctly again. As far as I know that your device comes with fixed burner DVD Super Multi (Double Layer) and you should be able to create all formats.

  What is DVD format?

• P20: cannot use the DVD - RAM drive after installing a trial software

  Hi members,

  I am using Toshiba satellite P20 - 604 model - load with windows xp prof - SP2. I wasn't able to use the software from burning DVDs successfully, so I tried to install cyberlink Power2Go software (trial ver) in there and ended up with "No. DVD RAM DRIVE APPEAR" in my computer. I could see the device dvd - ram with a yellow exclamation point in Device Manager. (the drive model is MAST * A DVD-RAM UJ-811). I tried to update the driver for it, no use. No idea how to recover the original driver and make it available for use dvd - ram drive? waiting for your valuable solution.

  Thank you & best regards

  M.Kanagaraj

  Hello

  The easiest way is to use the system restore option if you have created a restore point before you have had an experience with the trial version of Power2Go. If this is not the case, check if there is a system restore point has done in recent days.

  Good bye

• Errors in device IO & DVD - RAM UJ-811

  Hi all;

  I am writing to ask support for CD-ROM/DVD-ROM for my Toshiba Laptop/Notebook drive. I have a Satellite P20-504, Windows XP Media Edition and as you probably know, the drive is a carpet * a DVD-RAM UJ-811. When I insert any type of disc, Nothing happens. The same car doesn t spin and sometimes I get the slightest glimmer of a drive next to my hourglass icon but then nothing. The problem occurred this morning, (21 November). I used the laptop and the DVD - RAM drive, I stopped the laptop after completing the work. 30 minutes later I restarted the laptop and the DVD - RAM drive is no longer worked, simple as that. There were no new downloads or updates within 48 hours before the breaking of this device. The computer laptop and DVD - RAM worked several times since a lot of new updates and downloads without problem. I can open the draw of disk by right-clicking on the icon for DVD - RAM in my computer so messages are going.

  I now get the following error message:

  D:\ is not accessible. The request could not be performed because of an i/o device error.

  Things I did to try to solve the problem including:

  1. Uninstalling the driver after reboot, the computer recognizes the new hardware and re-installed the driver automatically. Driver still does not.
  2. I have restored the laptop to a pilot to date earlier still does not.
  3. I ran Norton Anti Virus, (after the recent updates.) Driver still does not work.
  4 scratched my head a lot. Driver still does not.

  This is the second time I had this problem with the same notebook and I had to return the laptop to the shop for repair, and this problem seems very much the same as before.

  I understand there are UJ - 811b, an upgrade of the DVD-RAM driver that I currently have. After have been searching the net for advice on the resolution, it appears that masts * one readers get a bad press.

  Computer Toshiba laptop, Satellite P20 - 504 Windows XP Media Edition (Service Pack 2).

  Carpet * a DVD-RAM UJ-811 version 5.1.2535.0

  I just need a DVD-RAM that works, please.

  Appreciated all the support and advice.

  Thanks in advance.

  Kind regards

  Rob Winter.

  Hello Rob

  I use my Satellite P20-303 over two years and nave no problems until now. My camera has been bundled with DVD-R/RW drive and drive TEAC DV-W22E (DVD-RAM), I bought and I am very satisfied.

  It of a little slower but works perfectly.

  All that you have done so far is right, but I believe that this error message indicating that it is a hardware problem. It is possible that unit has power and you will be able to open it but it is not recognized by the system and cannot be used at all.

  In my opinion, you should contact the service partner. I hope that the warranty is still valid. If this isn't the case, you have to check if this problem persists after installing recovery complete. On this way, the device will be preinstalled clean and it works properly. If this is not the case, there is certainly some malfunction of the equipment.

  As I mentioned with my camera I use TEAC DV-W22E and I can just recommend to use this player.

  Good luck and let me know if you will be able to solve this problem.

• DVD recorder is not read/write discs DVD-RAM on Satellite A200-1GH

  Hello!!

  I have the problem as the topic - my DVD drive is not read/write DVD-RAM discs (recorder: HL-DT-ST DVDRAM GSA-T20N). Unfortunately, there is no any drivers (more recent than I've got) for this recorder on the Toshiba, not even site on LG or Microsoft. What should I do?

  Greetings

  Hello

  To be honest, it's quite strange. If the laptop is preinstalled with recovery image, it should work. I tested it on my laptop 5 minutes ago and it works. The DVD-RAM disc is readable and different documents can be saved on the disk too.

  Do you use your own installation of OS, or you still have some factory settings?

• Re: Mat * a DVD - RAM UJ-850 s ATA - Satellite P

  Hello world

  My laptop - Satellite P 160 does not read and does not recognize my CD/DVD readers. In other words, it's like there is no such thing as "D".

  It seems a problem with the carpet * a DVD-RAM UJ-850 s ATA... or the driver of it. I'm not sure to be honest.

  I tried to find a driver for the carpet * a DVD-RAM UJ-850 s ATA, but I couldn't find it.

  Anyone help me, please?

  Thank you very much.

  MW13

  Hello

  First of all I must say that there is no such thing as the P160 Satellite
  Then perhaps you could post a right cell phone model.

  Secondly I recommend to follow this short statement to solve this;
  -go to Device Manager and remove the ODD (optical disc) of the list of devices
  -Then go to the registry and remove the
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  -then restart the device and check how it works

  Good luck

• Carpet * a DVD-RAM UJ-820 s does not recognize blank DVDs

  My laptop recently stopped recognizing blank, or I burned when I put them in the DVD player.
  The drive is a CARPET * a DVD-RAM UJ-820 s and it was working fine until last week when I tried to use the ASHAMPOO Burning software.

  He does not even recognize any MOVIE DVD I put in the drive, but it doesn't seem to have a problem with a music CD, I tried.

  Someone to help they could offer cause I'm running out of space and I really want to delete my files.

  Thank you

  Hello

  It looks a bit like a malfunction of the equipment. Maybe the lens of the drive can not calibrate correctly.

  Another clue;
  Have you tried to delete the upper and lower filter registry entries?
  Try it. Sometimes such procedure can simply bring the reader to life.

  The detailed procedure and description has been published here in the article Microsoft Knowledge base:
  http://support.Microsoft.com/kb/314060/en-us/

  Good luck

• DVD writing error Mat * a DVD - RAM UJ-850 s on Satellite L30-113

  I have Toshiba Satellite L30-113 psl33 with Mat * a DVD - RAM UJ - 850 s. operating system is Windows XP SP2.

  This drive read and write CDs, play DVDs, but don't write DVD the last time.
  After inserting DVD the status of the device in 'My computer' change to 'DVD RAM' on 'CD RAM.
  After the attempt to write, the errors are "Gage power error" and "not full disk at a time.

  Writing at the beginning of the DVD is OK.

  In your opinion, is it soft or hard error?
  Must I update DVD-driver or the replacement of the DVD player?

  Hello

  > I need I update DVD-driver or the replacement of the DVD player?
  Usually the ODD driver is part of the Windows operating system.
  Windows uses the internal Microsoft driver that controls the ODD.

  In any case, the European driver Toshiba page contains a DVD - RAM driver. This driver gives you more support for your DVD RAM drive.
  I m not very good if it will help you, but try to reinstall and check if the drive will be CD - RAM DVD-RAM

  See you soon

• Re: SA80 cannot find DVD - RAM drive

  A client gave to a backyard tech because the DVD player was not working. Apparently, he got working and formatted and reinstalled the computer - thus leaving without a driver. In addition, it has formatted wrong, messed up the MBR a bit.

  In any case, I've completely wiped the HARD drive and got to halfway through the installation of windows XP Pro before I realize that I was installing the wrong for his key. Cancelled, and the installer threw a bit of one-piece - so when I got back home, he tried to start the setup of pro at the disk - it was just a big mess.
  Issues and blue screens. Then I jumped in Vista and used the disk to format the computer (under Vista read a driver error with regard to the discs and hard drives has not bothered to install it and I simply used the recovery console and the words "Format C:").

  And now the DVD player does not work yet. Anyone with bright ideas that will save me an aneurysm?
  It is not displayed under BIOS (it's a laptop, so it could not be supposed to.),
  And when I changed the boot order to go drive it jumps directly to the disk drive - what is more a BONE and so informs me that BootMGR is missing. Through PXE, and he can't get the reader either.

  The drive seems to be spinning, but then faints.

  I don't know how the previous technology solved. I could tear this laptop apart looking for a broken cable, but I doubt that's the problem.

  Info; Satellite A80 1.86, 1 GB RAM, 60 GB HARD drive. disc is a DVD-RAM. And it's a P006andsoonandsoforth.

  So, any ideas?

  > Update - got the drive working again. I'm going to operate under the theory that the drive is sensitive and that the owner must have hit it on some - as I have been set a little wiggle.

  Great! Thanks for this feedback

• Help with the driver DvD Ram for satellite P10

  On my laptop (satellite p10) is Windows 2000 Professional running, but the driver DVD Ram of the Toshiba Homepage does not...
  Where can I get a driver that works on my laptop?

  Hi Val,

  The correct driver for your laptop running Wnidows 2000 should be version 3.0.8.0 and is available for download from the Web from Toshiba website.

  I presume that it is the one that you tried, so I don't know what you mean when you say that "it doesn't."

• Equium L10 needs a driver for DVD - RAM drive

  It's rather embarrassing, but these days, I found that somehow, the driver for my DVD RAM (Mat * un UJ830s) is somehow damaged or missing.

  I searched high and low on the net to find the right driver to reinstall, but I can't find a single thing.

  Do not can someone help?

  Do you mean simply common driver for the carpet * a UJ830s?
  Windows generally use the common Microsoft OS driver and usually you will not find a Toshiba driver for this device.
  OK, on the page you will find a DVD - RAM but it s only for reading and writing to DVD-RAM media.

  Attention if you use DVD-RAM disks in the drive of DVD MULTI data cannot be written to a DVD-RAM disk, while the function to write data on discs CD-R/RW standard Windows XP is enabled.
  A message is displayed when this function has been enabled, so when using a DVD-RAM disk, take into account the teaching given in this message by unchecking "enable CD writing on this drive.

• Driver for Matshita DVD-RAM UJ880AS Vista does not refresh

  DVD does not, the driver updates

  Matshita DVD-RAM UJ880AS

  Toshiba Satellite A500, Windows Vista

  The DVD will be able to, but it won't play.  Device Manager says

  "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) »

  the button "Check for solutions" does not solve the problem

  Tried to update the drivers, but it says I have the most up to date.

  Microsoft fix - it didn't resolve the problem, or the other.

  What's next?

  http://support.Microsoft.com/kb/982116/en-AU

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  See if the information above solves the problem.

  See you soon.

  Mick Murphy - Microsoft partner