Driver HP 6735 s Windows 8.1 problem display

Similar Questions

• Aspire driver V3 - 772 G Windows 8.1 USB 3.0 problem

  Hi all

  I bought my V3 - 772G 1 months ago about.

  Yesterday everything worked well and today, I noticed that none of the 4 USB ports were working (laptop was suspended since yesterday)

  No USB not connected, nothing. Key/mouse USB/hard drives /... does not work.

  I noticed that in Device Manager, I had problems with the ' USB 3.0 eXtensible Host Controller Driver "that the driver was not loaded. I've seen people online saying to uninstall and restart the computer. That and once again no operation USB, Device Manager, the device with problems was now "Compliant Host Controller xHCI USB".

  I tried WITHOUT success to the following:

  -Downloaded ' USB 3.0 eXtensible Host Controller Driver "Intel has failed (available only for W7) - Web site

  -Restart windows full - same

  -Disconnecting the battery and power for a few minutes, restarted - even

  -Remove all USB devices (hubs and so forth), restarted - even

  -Uninstalled all updates of 2 days before (to the point that I know that it worked) - pilot months before change - same result dates

  -Tried to search the BIOS to disable USB3.0 and put 2.0 - not found

  -Tried to get back to another restore - point na not work, complained that the disc is maybe damaged

  -Widnows run chkdsk/r several times - no error found - nothing resolved

  -Run chkdsk/r - stuck at 16%, but I guess that needs all night (TODO) - solved anything

  -Tried to do a repair without losing files (using recovery partitions) - always guess how

  Any idea or any help? They just stop working. I plug laptop already with windows 8.1 and they worked for 1 month

  Thank you

  -UPDATE1-

  I used the command-line (via recovery windows at startup) and copied all the files from backup drive (I assume) X:\Windows\System32\Drivers\usb* on the local drive C:\Windows\System32\Drivers

  Rebooted - still nothing

  [Solved]

  Here's what you can try:

  (1) ensure that the ntbtlog.txt file located in C:\Windows it is removed (to clean the logs)

  (2) to activate the startup log check which driver loading fails:

  Option A:

  (1) open administrator command prompt

  (2) write "bcdedit/set {default} bootmenupolicy legacy" to allow the start of legacy with F8 (don't forget to change the settings after this guide)

  (3) reboot and press F8

  (4) select this option to start with active log

  Option B:

  1) press "WIN + R" and write "msconfig".

  (2) in the Startup tab, select the option "Startup journal."

  (3) to apply the changes and reboot (remember to change the settings after this guide)

  (3) check the drivers failed in the log (C:\Windows\ntbtlog.txt) file (in my case I got "ucx01000.sys" driver failure)

  (4) after researching online (Source) I saw the USB3.0 stack consists of 3 files of accommodation with the xHCI Host Controller: Usbhub3.sys, Ucx01000.sys and Usbxhci.sys.

  (5) restart the laptop and press 'ALT + F10' to enter in the menu ACER recovery

  (6) select "Troubleshooting", then "Advanced Options", then "Command Prompt"

  (7) you will be located in the "X:" drive and the folder "system32" of the recovery unit

  (8) write "cd drivers.

  (9) "copy write Usbhub3.sys C:\Windows\System32\Drivers\" (if you are asked to overwrite, answer "Yes")

  (10) "copy write Ucx01000.sys C:\Windows\System32\Drivers\" (if you are asked to overwrite, answer "Yes")

  (11) writing "copy Usbxhci.sys C:\Windows\System32\Drivers\" (if you are asked to overwrite, answer 'Yes')

  (12) write 'exit '.

  (13) restart your laptop, and you should be able to use USB again

  (14) disable the startup option if you used Option B.

  In my case, the "Ucx01000.sys" file was missing in the drivers folder.

• After installing windows optionally updated my display driver is the cause of problems

  I have DELL Inspiron 14 with windows 7 home preium

  After installing windows optionally updated my display driver is the cause of problems
  Ran troubleshooting it says "material changes could not have been detected.
  Help, please
  Thank you

  Use the function "restore" to restore your system to a point before installing optional updates in windows.

  After that, go to Windows Update and 'hide' the update that caused the problem.

• HP655 update for windows 8.1 problem with Realtek driver

  Need help with the problem addressed in another forum HP.

  http://h30434.www3.HP.com/T5/wireless-Internet-home-networking/HP-655-update-to-Windows-8-1-problem-...

  The last message point far on this forum to get help.

  -----------,

  Install the new Bios and the network works

  655 HP

  Updated HP Notebook System BIOS (AMD processors)

  Version:

• Windows 7 installation problem: device driver cd/dvd not found___

  I am running Windows XP 32-bit and just bought the Windows 7 Home Premium 64-bit. I ran the update Advisor and I can run the 64-bit version - I'm running a 3gig dual-core rig.
  When I start the computer from the windows disk it says above (job title) after waiting ages in the installation program. It is not also take me to a page to do a clean install, as in windows XP when you went blue screen startup. All I want to do is to format my C drive and install Windows 7 above, but happens as if I want to that I don't have.

  I don't want to format my hard drive to find that Windows 7 does not correctly or the other? Any suggestions? Why what is happening and why can't I just do a clean install - i.e. Delete partition, format partition etc and install Windows 7?

  There are 2 main threads for this issue, which seems to be related to the retail drives (and others):

  http://social.answers.Microsoft.com/forums/en-us/w7install/thread/48cdc51e-AFFC-40EC-a0ba-62d37948843c#c96e2c40-5d0a-45df-BF47-a6eff30c5d2b

  And the other is a general discussion thread:

  http://social.answers.Microsoft.com/forums/en-us/w7install/thread/c211ce29-8e5c-4A2F-AEEE-fc2a6e62aef5

  I posted a few solutions in the first thread, so I would check everything first.

  Also, can you let me know if your machine is a gateway?

  I hope this helps. If you find my answer was what you're looking for, remember to click on the box "mark as answer" below!

• My external drive thunderbolt causes 10 Windows to reboot into Bootcamp. Normal?  Difficulty?

  I have an imac of retina.  I use Parallels to begin Windows 10 without any problem at all.  Unfortunately, due to a problem of graphics card, one application will not work properly.  They advised me to install Windows 10 using Bootcamp, repeat this application and see if it works.  This resolved the conflict with this software.

  Unfortunately, Windows kept re-booting and ultimately would crash and must be put back in place (at least it seems).  I did this same process several times.

  Process of elimination, I found that if I unplugged the external drive thunderbolt, it resolved 100% of the problem.  No more problems with the re-start.

  I tried researching and I see people have problems with the Thunderbolt and Windows 10 screens, but really nothing else mentioned.

  My understanding is that this is not a conflict when you use Parallels because I am still running off the Apple ecosystem, but thanks to bootcamp with Windows only running, it gets confused by the thunderbolt connection.

  I know that this may be more a problem of winner - snoozing, but is there any work around this other disconnect me the Thunderbolt disc whenever I want to use the version of Bootcamp for Windows 10?

  Thank you.

  What is the year/model of your iMac?

• My explore menu does not display the drives. How can I solve this problem?

  Original title: hard drives

  My explore menu does not display the drives.  How can I solve this problem?

  Hello fpiraro,

  Thanks for the return of the response.  Please visit the link below and let us know the status.

  My drive does not appear in Windows Explorer

  http://support.Microsoft.com/kb/330140

  • Microsoft Windows XP Professional
  • Microsoft Windows XP Home Edition
  • Windows Vista Business
  • Windows Vista Business
  • Windows Vista Home Basic
  • Windows Vista Edition Home Premium
  • Windows Vista Starter
  • Windows Vista Ultimate Edition
  • Windows 7 business
  • Windows 7 Home Basic
  • Windows 7 Home Premium
  • Windows 7 Professional
  • Windows 7 Starter
  • Windows 7 Ultimate

• Error message so that the installation of windows and windows xp, a problem has been found was arrested to prevent damage to your computer

  I currently have a HP g4 with an AMD Phenom x 2 p650 (64-bit) 4 GB of ram and a 500 GB HARD drive. It has windows 7 Home premium on it, and I'm double starting with windows XP. However, whenever I insert the windows XP disk it says:

  If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:
  Check for viruses on your computer. Remove any newly installed hard drives or disk controllers.check hard drive to ensure that it is correctly configured and completed. Run chkdsk /f to check for hard drive corruption, and then restart your computer.
  Technical information
  STOP: 0x0000007B (oxF78D2524, oxc0000034, 0x00000000, 0x00000000)
  I tried the 32 bit and 64 bit and followed the instructions above.

  Hello

  I suggest you follow the link to fix the problem and check if it helps:

  Error message "STOP 0x0000007B" when you restart your Windows XP-based computer

  http://support.Microsoft.com/kb/316401

  Reference: Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP

  http://support.Microsoft.com/kb/324103

• Error: «Please insert a blank disc into the CD drive (E :).» Once Windows Media Player detects a new disc, it will start automatically burning"

  Hi, we are currently running Windows XP SP3.  My daughter tries to download a song from Windows Media Player, she needs for her class dance.  It just download the song bad by accident without problem.  Now she's trying to download the song using the same CD (CD - R80) and it gives sound this error: «Please insert a blank disc in the CD drive (E :).» Once Windows Media Player detects a new disc, it will start automatically burning."  Someone please help.  She needs this to practice his senior dance solo.

  As I understand it, the CD was already burned once, and now she's trying to burn on the same CD again? This is not possible, as the CD - Rs can only be burned once. She will need a new blank CD - R, like the error message.

• Cannot install windows XP it said hard drives are not connected & windows can not find the hard drives

  I got an asus computer notebook windows vista, upgrade from vista to windows 7, now I'm not able to do a clean install of windows xp, when I try to install XP, it says that hard drives are not connected & windows cannot find not the hard drives, so once again installed windows 7, is there a way to overcome this problem Why do I get the message windows xp does not detect hard drives? I even formatted the hard drive & tried to install Xp, but still, I get the same message.

  The answers will be appreciated...

  Thank you

  Because the Windows XP installation CD does not have the necessary disk controller drivers.  You will need a floppy drive to provide the drivers of controller for the installation program, or you will need to burn a CD of Windows XP with the controller drivers slipstreamed into the installation.  A CD of Windows XP with SP2 included may have the necessary drivers.

  John

• Windows XP Backup problem, cannot find the backup utility

  original title: windows xp backup problem

  I have a system with windows xp, I tried to backup the drive c: to the top, when I click on start, all programs, accessories, System tool, I see how to do anything else but up... i back cant find utility backup click on... then save my c: drive?

  Hello

  I suggest you follow the steps mentioned in the article given below to install windows on the system backup.

  How to install backup from the CD-ROM in Windows XP Home Edition

  http://support.Microsoft.com/kb/302894

  Also, I suggest you return the article mentioned below to learn how to use the backup utility.

  How to use the backup utility to back up files and folders in Windows XP Home Edition

  http://support.Microsoft.com/kb/320820

• User-mode Driver Framework Host Process has encountered a problem and needs to close...

  I have an e280 and have been using Napster to Go for a few years. Computer running XP. All of a sudden, we get this message when you plug the Sansa in MTP mode:

  Windows Driver Foundation - User-mode Driver Framework Host Process has encountered a problem and needs to close.  We are sorry for the inconvenience. 

  the error signature:

  szAppName: WudfHost.exe szAppVer: 6.0.5716.32 szModName: WudfHost.exeszModVer: 6.0.5716.32 offset: 000130f5

  technical information about the error report:

  C:\DOCUME~1\EARLDA~1\Locals~1\Temp\WERb6aa.dir00\WudfHost.exe.mdmp

  C:\DOCUME~1\EARLDA~1\Locals~1\Temp\WERb6aa.dir00\appcompat.txt

  Sansa works very well in MSC mode, but then I can't synchronize with Napster. WMP 11 has updates. I tried many tips from Device Manager that have been mentioned, but it will not be installed successfully.

  Any thoughts?

  Thank you!

  You can try to go back to WMP 10, remove the driver framework user-mode (on the Panel-> Add/Remove Programs) and then update back to WMP 11.  It might even work with WMP 10, so try before upgrade to WMP 11.

• Windows 7 installation problem Pavilion dv6-6c45eg

  Since I have a free license for windows 7 Professional at home, I decided to install it on my new Pavilion dv6-6c45eg that came with Windows 7 Home Premium.

  The problem is that the installation process stops at the beginning and said something like: "A required CD/DVD drive driver is missing... ", then he gives me the choice to load a driver. I googled a lot since yesterday and there seems to be something related to the SATA driver, however even load the SATA driver installation is not moving forward, after loading the driver it say that no new units have been detected.

  What I tried:

  * Install Windows 7 x 32 and x 64
  * Install from a USB flash drive

  * Install Windows 8 (same problem in Windows 7)

  * Check the SATA in the BIOS (not possible to see or modify on the BIOS F.19)

  * Search for the shortcomings of HD (even changed the HD)

  I'm sure it's something related to a driver, because I also installed Linux (OpenSuse, Fedora and Ubuntu) operating systems and they work fine.
  So, I would appreciate help to solve this problem.
  Thank you very much.

  Marcio

  Hi B Mista, thanks much for your reply, but I finally solved the problem, as described in this link:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/a-required-CDDVD-device-driver-is-missing-USB/61eda679-66cc-4512-B175-d02871394461

  Kind regards

  Marcio

• HARD drive not recognized by Windows Vista Home Edition (32-bit with Service Pack 2)

  Windows stopped to recognize external 500 GB drive external HARD on my Ascer Aspire 5610Z attached via the USB port.  Have tried two USB ports, but won't recognize the device.  Seeing of the device lights up and the device can be played on another laptop.  OK worked until a week or two ago, but cannot restore because it's on this unit that the backups are done!   Windows is 'unknown material' and trying to find the driver, without success.   Device Manager reflects an unknown device but gives no description, etc.

  Hi Peter St Clair,.

  1. did you of recent changes on the computer?

  2 are you able to access other USB devices on the computer?

  Method 1

  See the link below and run them the fixit tool available, check if it works.

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

   

  Also, check if the drive is detected and letter drive affected by the management of the disks on the computer.

  Change, add, or remove a drive letter

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-add-or-remove-a-drive-letter

  Method 2

  If the previous step fails, then I suggest you reinstall the USB controllers on the computer and check if it works.

  Note: If you use a USB mouse, please follow the steps of "Using the keyboard" to reinstall the USB controllers. Windows 7 will reinstall all the controllers automatically after restarting your computer.

  Use the mouse

  --------------

  First of all, please disconnect all USB devices and then perform the following steps:

  (a) click on 'Start', type 'Device Manager' (without the quotes) in the search bar and press "Enter." If necessary, click on continue.

  (b) in Device Manager, double-click to expand the "USB Bus controllers", right-click on the "host controller", click "Uninstall" and click "OK".

  (c) repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and Windows Vista will automatically reinstall all USB controllers.

  Use the keyboard

  -----------------

  First of all, please disconnect all USB devices. Then go through the following steps:

  (a) press "Ctrl + Esc" to open the Start Menu.

  (b) Device Manager to type in the search bar and press "Enter." If necessary, click on continue.

  (c) in the Device Manager, press Tab and use 'Up' and 'Down' to move the selection from 'de Bus USB controllers '.

  (d) press 'Right' and expand it.

  (e) press 'Down' to move to the first item, and then press "Delete" to delete.

  (f) repeat step 5 and uninstall everything under 'controllers of Bus USB '.

  I hope this helps!

  Halima S - Microsoft technical support.

• Can't get the driver for 32-bit windows 7 HP DeskJet 5440 via windows update.

  Original title: driver HP DeskJet 5440 windows 7 32 bit

  I was unable to get the driver for 32-bit windows 7 HP DeskJet 5440 via windows update.  I also was unbale to find your compatibility Center.  Is there a link were I can down-load the driver directly from.

  Tony,

  In fact, I assumed that yours was always supported by HP * but I understand now that it's not [so I guess that it is more than 10 years because it is their general support period].  {* Mine is a DJ 2540 and is only a few years so I thought a 5440 DJ must be more recent}

  I see that HP gives you general instructions on installing drivers in http://support.hp.com/gb-en/product/hp-deskjet-5440-printer-series/445466/model/445467/document/c01796879/ I checked Microsoft update catalog service and nothing found for HP Deskjet 5440, that's why you're not having any success with the generic instructions, giving you these instructions seem to presuppose the existence of a Windows driver for this specific model.  {HP must have given up your specific model before that this catalogue has been compiled, because hardware manufacturers are those that connect to their drivers inside}

  However, my suggestions may solve your problem or maybe not.  They are simply the steps that seem more likely to be successful.  Personally, I'd a system image before you try each of these suggestions so that you can go back to square one if something goes terribly wrong.

  Suggestion 1 - go to the devices & Printers dialog box, click Add a printer, select HP then select HP Deskjet 5400 series [the sequence in the list is awkward, this entry is about 10% of the way to the bottom of the list], click on Next and follow the procedure of menus at its conclusion.  Even if it's completely successful, plan to run my Suggestion 4 below as well in case of future need.

  Suggestion 2 - out whatever the driver that shipped with your printer in the first place, try to install in compatibility mode [right click on its executable, click on the tab compatibility , the value of the check box for run this program in compatibility mode for... and select a BONE the printer worked correctly with.]  Then go to the executable, right-click and select run as administrator.  This idea is not frivolous, until he blew something internally, I was using my 1999/2000 HP Deskjet 1220C successfully on Windows 7 x 64 for four years [despite the HP user forums which implies that this was not possible].

  Suggestion 3 - go back to the HP site to http://support.hp.com/gb-en/drivers/selfservice/hp-deskjet-5440-printer-series/445466/model/445467 but select 10 Windows as your operating system.  In the results, the Diagnostics Utility Tools point contains now a setup generic [hppiw.exe] who described "HP for Windows printer setup wizard was created to help users Windows 10 download and install the software solution most appropriate for their printer and newer HP HP Windows 7 and Windows 8/8.1.   Simply run the tool and follow the on-screen instructions. " Download & run [run as Admin] of this file.

  Suggestion 4 - Connect to an Admin-level account first, then, using IE [there than IE], date back to the Microsoft update service catalog and search for HP Deskjet 5400 series.  It will give a lot of results, then click on the driver name in the left column of title to see details for each potential choice [especially if it is 32 or 64 bit].  The top of the list is [32-bit] Microsoft Update for HP Deskjet 5400 Series driver dated June 21, 2006.  [You might also download & file the second element, the 64-bit version, just in case you change computers in the future]  Add the chosen driver [s] to the "trash" then download - you will be asked to select a file to download first {it is at this stage that the process would be a break without further explanation or any error if you had not been connected to an Admin-level account before launching IE}.  I think that these drivers also work with Windows 10 thus, in the hope that your printer works for the years to come, it would be well worth your copies of maintenance of them filed there ready for your next computer use.

  Proposal 5 - go [back] to the forums of user HP Deskjets & find 5440.  See if any of the other suggestions can help you - unless you have already looked through them all the more relevant [I realize that you have been here once already as one of the threads that I just watched was of you].

  We know, in advance, which of these suggestions will lead to the best possible solution.  So please come back to this forum to explain what happened when you tried the.  Your experiences will benefit all users of HP Deskjet 5440 who come here looking for advice.

  Good luck