Driver HP PSC 1317 wont install on windows 7 - please help

Hi, I really hope that someone will be able to help me solve this problem. I tried for more than a week to try to install the drivers for this printer and nothing has worked!

I am running windows 7 (64-bit).  I downloaded the driver from the HP website, I tried to install, uninstall, reinstall, I tried all the troubleshooting options (disable the start up programs, firewall, remove temporary files, etc.).  I tried to use windows update, which fails to install updates for the driver as well.  I tried windows update troubleshooting, HP print and scan doctor and everything else that I found online.  but nothing has worked.

I tried to install the driver from the hp website and it installs everything other than the driver, if I try to install just the driver fails, I get the error message 'Fatal error' no code error with it and there is a check mark next to any other than the driver, which has a red x next to it.

When windows update tries to install the printer when I connect the usb port of the printer to the computer it finds the driver, try installing and then only comes up with "unable to install the driver"

another message, that I had on the numerous attempts to install is 'error 0x000003eb', but none of these options of troubleshooting the problem.

Please someone is able to help me solve this problem?  its driving me crazy!  I just want to be able to print documents, im not bothered about scanning or something else

Thank you

Jodie

Unplug the printer, run Disk Cleanup, uninstall any software of HP printer via programs & features, restart the PC

Download/save the full software features of HP, then run the Setup and follow the instructions

http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=374584#n187

If you see then the error msg 'error 0x000003eb.

Then refer to this http://social.technet.microsoft.com/Forums/windows/en-US/86cc6755-e245-46d7-9fb9-5f7d8f1b74a1/cannot-install-printers

Tags: Windows

Similar Questions

  • How can I recover my data from my hard drive? or continue to install my windows 8 with no loss of data?

    I have deleted (formatted) my windows 8.1:

    Disk 0 Partition 1: Recovery, and

    Disk 0 Partition 2

    A single disk rest "Drive.
    I tried to install my windows 8 8.1, now I'm stuck with a Dell Inspiron that cannot load it is current windows and I can't afford to format because it locates all my data.

    Please help with possible recovery options, that I may have? The last thing I tried was buy an enclosure and place my 500 GB HD inside, how ever I saw the first two aforementioned HD

    Help, please

    Hi, I found the solution, I had to plug my hard drive in a case then:

    1. restart the machine with Windows 8.1
    2. determine the parition of "EFI system" with the disk management utility
    3. Run as administrator command prompt
    4. typediskpart
    5. type select disk 0 then select partition 2 thenassign
    6. He will appear in my computer that he did as a player
  • I need driver audio windows enterprise 8 for asrock g41m-vs3 r2.0 motherboard.my new windows is loaded, but not his driver .other that I got take advantage of windows 8 Please help.

    I need driver audio windows enterprise 8 for asrock g41m-vs3 r2.0 motherboard.my new windows is loaded, but not his driver .other that I got take advantage of windows 8 Please help.

    According to this site:
    http://www.ASRock.com/MB/overview.asp?cat=download&OS=all&model=G41M-VS3 R2.0
    There is no driver Win8 MB for. You can try to install the Win7 audio driver in compatibility mode.

    According to VIA, this Windows 8 driver:
    http://www.via.com.tw/en/support/drivers.jsp
    supports the VT1705 chipset, which is what your MB.
    (Step 1 - Windows
    Step 2 - Windows 8 bits - xx
    Step 3 - audio
    Step 4 - VIA HD Audio codec VT1702S, VT1705 VT1708B, VT1708S, VT1716S, VT1718S)

    SC Tom

  • I bought Adobe Master collection CS6 and accidentally damaged installation disc, but I have the serial number and need a software to download to install on my computer please help me where to download the software from?

    I bought Adobe Master collection CS6 and accidentally damaged installation disc, but I have the serial number and need a software to download to install on my computer please help me where to download the software from?

    Available downloadable Setup files:

    Download and installation help links Adobe

    Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  • Windows 7 error 14001 while using iTunes on my windows XP, please help

    Windows 7 error 14001 while using iTunes on my windows XP, please help

    Please ask your question on the forum from iTunes here: https://discussions.apple.com/community/itunes/itunes_for_windows?view=discussions

  • K015dx m6 ENVY: envy m6 k015dx - no hard drive detected on a clean install of windows 10

    Hello, after upgrading fromwindows 8 to 10, windows starts not more and I can 't repair.

    the only option is to reinstall windows 10 (new installation).

    The problem now is that windows 10 does not see the hard drive, I'm trying to install the driver of intel rst but not at all, the hard drive and partition are not seen. I have successfully test the hard disk with bios diagnostic.

    No idea on how to solve this problem is welcome?

    Thank you in advance

    I have me there final put another hard drive and it is detected by all the different operating system installer.
    It seems that Windows corrupted 10 hd, I use a usb adapter TO connect the old one on another computer, hard drive was visible, but not initialized. I m not the only one having this problem, I received a call from someone Salinger for help.
    Thank you for your support

  • Creative Cloud Wont install on Windows

    Hello

    I have a PC with Windows 7 Pro. 8 GB of ram, to open space and Norton 360 installed and LR and PS

    I had installed creative cloud and he refused to be updated.

    I had to remove and reinstall.

    OK, so I tried to uninstall it. Nope

    OK, I had to use the app tried to uninstall it, success having failed, I tried again, having failed, once again, I tried... uh OK.

    Downloaded the installer of creative cloud for PC,

    its opening, dbl click, click 'Run'... nothing... no indication that something happened. Now, remember, I installed it and LR and PS, the last 2 are still installed

    Tried to download again, open, double click, click on 'Run'... nothing, once again, downloaded it... Open in it, double click, click 'Run'... nothing

    Rebooted, downloaded, opened, double click, click 'Run'... nothing.

    Reboot again. Firewall removed, open, double click, click on 'Run'... nothing...

    Large. No idea at this point.

    Any indication that something happens to all except the frustration and nothing was found in the forums it's similar.

    Hi duck % 20Warrior,.

    Please reset your Host file. See, Advanced solutions to errors in connection with Adobe Creative Cloud and Creative Suite applications

    After that follow the steps below:

    • Please check if you have installed browser security extensions, please disable them. (For example: AD BLOCK, Advisor to Mcafee website, toolbar of internet security etc.)
    • Disable the firewall on your machine.
    • Turn off the firewall of the security program installed on the computer Internet. (Norton 360 - disable the following in it: Surf safely, firewall, browser protection, download intelligence)

    These changes are temporary you can restore these changes back to normal once your creative cloud application is in place and functioning *.

    (1) uninstall Creative Cloud Desktop Manager:

    Using creative cloud | Uninstall the creative cloud desktop application

    (2) delete following folders: (if you do not see any folder skip this step)

    C:\Program Files (x 86) \Common Files\Adobe\OOBE

    C:\Program Files (x 86) \Common Files\Adobe\Adobe Application Manager

    C:\Program Files (x 86) \Adobe\Creative Cloud files

    C:\Users\\AppData\Local\Adobe\ MAA UPDATER and two OOBE (App data & Program Data is folder hidden please see, Show files and folders hidden in Windows 7, 8.x, 10, or Vista)

    \Adobe\ DONNÉES C:\Program rename SL-STORE like SL-STORE_OLD

    3 - Click on the link below and download Creative Cloud Installer file and use them to install the creative Cloud Desktop application.

    Download Adobe Creative cloud apps | Free trial of Adobe CC

    Let us know if that helps.

  • Canon mp280 series PRINT DRIVER cannot be installed in my Windows7 please help me :(

    Hi everyone Im having a problem with my new printer which is MP287 CANON.

    The application of canon was installed and I've also corrected the problem 0 x 00000709 (default printer), but the error 0x00000002 always appeared whenever I go to printer properties and add the driver(from windows) I tried many times but it always says that there is that my printer was not installed.. I also downloaded the driver from the canon website, but it doesn't really seem to work :( This is my 3rd day solving this problem... I honestly don't really have enough knowledge with this stuff. Please help me guys :'(((

    But you have installed the drivers before connecting the printer? Otherwise, windows can install its own drivers for the printer, if you connect to the printer and then turn it on

    You can try what this guy did in the last post

  • Wireless driver do not install for HP - D107TX, please help?

    Hello

    Recently I bought HP D107TX laptop and I tried to install the form of driver WLAN on your site. But it is not installed. When I click on the setup.exe it unpacks the pilots and shows a message "this program installed correctly" and "to Reinstall recommended setting using". So far, Wireless does not work on my knees. Please help me solve this problem.

    Thank you

    Concerning

    Andrée

    You are the very welcome.

    Here is the link for the driver for the usb controller 3, you must...

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127803-1&cc=us&DLC=en&LC=en&OS=4063&product=6521374&sw_lang=

  • I want driver software for network and ethernet, controller pci devices, please help me

    my pc is g6-1130se

    Windows 7 32 bit

    I reinstall my operating system.

    I installed all the drivers.

    problem but on my internet and wifi

    When I went to the Device Manager, it says that it has not installed the drivers from, network, ethernet, pci conrtroller, pci communication controller.  so please help me for the device software appropriate to give me the link please.

    and the hardware id

    Ethernet controller

    PCI\VEN_10EC & DEV_8136 & SUBSYS_166F103C & REV_05
    PCI\VEN_10EC & DEV_8136 & SUBSYS_166F103C
    PCI\VEN_10EC & DEV_8136 & CC_020000
    PCI\VEN_10EC & DEV_8136 & CC_0200

    network controller.

    PCI\VEN_14E4 & DEV_4727 & SUBSYS_1483103C & REV_01
    PCI\VEN_14E4 & DEV_4727 & SUBSYS_1483103C
    PCI\VEN_14E4 & DEV_4727 & CC_028000
    PCI\VEN_14E4 & DEV_4727 & CC_0280

    PCI device

    PCI\VEN_10EC & DEV_5209 & SUBSYS_166F103C & REV_01
    PCI\VEN_10EC & DEV_5209 & SUBSYS_166F103C
    PCI\VEN_10EC & DEV_5209 & CC_FF0000
    PCI\VEN_10EC & DEV_5209 & CC_FF00

    PCI simple communication controller

    PCI\VEN_8086 & DEV_1C3A & SUBSYS_166F103C & REV_04
    PCI\VEN_8086 & DEV_1C3A & SUBSYS_166F103C
    PCI\VEN_8086 & DEV_1C3A & CC_078000
    PCI\VEN_8086 & DEV_1C3A & CC_0780

    Please help me with this, send me a link for the driver.

    Thank you, waiting for you

    Hello

    They are all on the following link:

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062 & LC = on & CC = US & DLC = in & sw_lang = & Product = 5119128

    Please first install the first list of chipset driver, then restart your computer. To use Broadcom wireless driver Realtek and Realtek LAN card reader then.

    Kind regards.

  • new netbook, old windows version please help!

    I just bought a netbook inespensive for my son he runs windows os6.0 .i have a desktop and laptop with windows xp, is anyway to upgrade a new without a disk, see how it doesn't have a hard drive? I have the product key of portable and desktop that are xp that we have purchased.on the new netbook, we can not access e-mail, because it is not supported by the OLDER VERSION, AND I can't FIND a WINDOWS UPDATE ICON ANYWHERE, so if anyone could please help me that would be wonderful.thank you.

    You can download and install Windows Live Mail for the new netbook.

  • Crash of Windows 7 - please help on recovering files

    I have a HP dv7 laptop that when I uninstall Kaspersky anti virus in order to install Kaspersky Security Suite my system froze requiring a reboot.  But now all I get is blue screen projection system errors.  I ran the Recovery Manager to back up my files, but when I try to retrieve the files on another computer recovery stops working on the 90% mark.  I'm afraid my documents of this laptop until I re - install all software.  I have thousands of slides that I scanned into the computer I need to record and also a file from a scrapbooking software product that I am in the middle of creating a dvd of all the slides which took me several months to do.  Is there a way to backup my files from the command prompt?  Or is there something else I can do?  I went to Best Buy, where I bought the laptop in October 2009 and they tell me that my warranty through them does not have software issues.  The cost for them to retrieve my files would be $150.00 without reinstalling everything.  I don't really have the funds to make them so that any help would be greatly appreciated.  Please give your contribution.

    If you can start to try Windows copy files on a DVD or an external drive.

    If you cannot start Windows repair:

    Try to repair the Installation of Windows 7

    1. Insert the DVD of Windows 7 and restart your computer
    2 boot from the DVD.
    3. choose your language and click Next.
    4. click on repair your computer, select the operating system you want to repair.
    5. click on the link to repair list system in the System Recovery Options recovery tools.

    If this does not solve it:

    1. Insert the DVD of Windows 7 and restart your computer
    2 boot from the DVD. If you are prompted, press any key to start Windows from the installation disc.
    3. choose your language and click Next.
    4. click on repair your computer, select the operating system you want to repair.
    5. Select command prompt and try the following commands (one command might work, or you may need to use several commands according to the exact problem):
     
    Bootrec /fixMBR
    Bootrec /fixBoot
    Bootrec /rebuildBCD

    Note: there is a space before the /.

    If none of these works use a Linux live CD to access/copy something in Windows 7

    If Windows does not start you can use a Linux live CD to access it - but be careful and know what you are doing. You can mess up your Windows installation if you remove things from the computer - if you are not sure that someone else do it.

    If you do not have a most popular LiveCD is Ubuntu. Download and burn to a CD using a different computer, then put it in your computer and start him - don't forget to choose the option of trying Ubuntu not make changes to the computer. Then find the files and copy them - you need to search your files in one of the file systems, they will not be in the 'My Documents' folder in Ubuntu. It has a built in CD/DVD burner, or you can copy on an external drive. Confused? That someone else do it.

    DOWNLOAD:
    http://www.Ubuntu.com/getubuntu/download

    How to:
    https://help.Ubuntu.com/community/LiveCD

    Questions about installing Windows 7?
    FAQ - Frequently Asked Questions from Installation Windows 7 & responses

  • HP Pavilion 15-p225na: product number Unknow Driver Hp Pavilion 15-p225na ACPI\HPQ6007: M3H44EA #ABU Please HELP! =(

    Hi I have a problem with a missing driver for something on my laptop, it just says: Unknow driver in Device Manager, the hardware id is ACPI\HPQ6007 and my laptop model number etc. is the product number Hp Pavilion 15-p225na: M3H44EA #ABU Please HELP someone! =(

    Please click the watch link below to download and install the driver

    http://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67280.exe

    Hope this helps, for other queries in response to the post and feel free to join us again

    Kind regards

    GBL84

    -------------------------------------------------
    Although I am an employee of HP, I speak for myself and not for HP

    If my POST helped you, please click on the 'button white Thumbs Up' to say thank you!
    Make it easier for others to find solutions by checking a response "accept as Solution" if it solves your problem

  • Cannot get windows 10 please help

    Hello, I recently built a PC after my laptop broke so I used the recovery disks on my new PC, but it does not install the necessary drivers then I hit the windows key and close, it is when I turn on my PC it pops up every time I tried to Sysprep was not working when trying to upgrade to windows 10 is not national work I'm in mode "check". , I tried to delete the value of the image, it just resets please help if you have an idea thanks.

    OEM of Windows versions are identical to the versions commercial full license with the following exception:

    -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

    -OEM Licenses are tied to the computer first you install and activate it on

    -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

    -OEM versions does not move directly from an older Windows operating system

    You must purchase a license of full version Windows 10 and perform a clean installation:

    Homepage Windows 10: upgrade or purchase - Microsoft Store

    or

    Windows 10 Pro: upgrade or purchase - Microsoft Store

    review

    How to: perform a clean installation of Windows 10

  • Lost the program Office 2003 Windows Vista - please help

    I lost Office 2003 from my laptop Windows Vista Home Premium - I know not how--I still files of Word, Outlook etc, but nothing in them - I really need to get to word files I have, but they opened used - please help - I can not afford to buy it. I'm sure it's still in the material somewhere, but how can I reinstall it?

    Help please

    Office:

    http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

    Office newsgroups

    http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Office.misc&lang=en&CR=us

    Discussions of general issues of the Office.

    http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Word.docmanagement&lang=en&CR=us

    Discussions of general issues of Word.

    http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Outlook.General&lang=en&CR=us

    Discussions of general issues of Outlook.

    They will help you with your office questions when repost you in the Office discussion groups above.

    See you soon.

    Mick Murphy - Microsoft partner

Maybe you are looking for