Driver installation problem

Similar Questions

• HP 802. 11b / g wireless network: HP 802. 11b / g wireless network adapter driver installation problems

  After installation of Windows 10 does not work me wi - fi, I can not find a compatible driver. The search I found one, but it gives me driver installation problems

  Hello @fede95,

  Thanks for posting on the Forum of HP and welcome!

  I'd be happy to help you with wireless driver problems you encounter since the upgrade to Windows 10.

  I will need to know your product number. You can follow the steps here - http://ow.ly/XnZL300dhzo - to find.

  I'm looking forward to hear back and work towards the resolution of this problem.

  If these steps solved your problem, please click "Accept as a Solution." You can also click on the "congratulations, Thumbs Up" on the right to say "thank you!"

• Creating a program the evolutionary IVI driver installation problems

  I have problems when you try to create an upgrade for an IVI driver installation.
  I created the installer by using the creative installer included with LabWindows/CVI 2010 IVI. In my case, I have two versions of the IVI driver DLL and configuration (1.0 and 1.1).
  1.1 - the installation program was created using the option "install existing rebuild" of the creator of the installer.

  My problem is the following:

  • If the driver of the IVI is not installed the 1.1 - installation is completed without error.
  • However, if the 1.0 driver is present, the 1.1 installer gives me the error message following just at the beginning of the installation:
    "Setup has detected a third party IVI driver in the directory C:\Program Files (x 86) \IVI Foundation\IVI\Bin. Please uninstall the existing driver before proceeding with this installation. »

  I noticed the things so far:

  • The UpgradeCode MSI remains the same for both configurations (as expected). This seems to indicate that the installation program supports upgrades.
  • The installer contains a DLL (NiIviDriverDetection.dll) used in a CustomAction to the 3rd party.
    What this DLL seems to do, is to perform a control version of the currently installed driver IVI DLL (1.0 in my case).
    According to the results of this audit, the installation process is abandoned.

  If everyone has noticed this behavior or anyone has any suggestions on how to create an IVI driver installer which can be upgraded without uninstalling the old version first?
  Maybe I put just an evil version information field, but I do not know that which (if any)...

  Advice would be greatly appreciated!

  I seem to have found a solution:

  The problem is that the MSI CustomAction, seeking a third drivers IVI (DetectAction.C1C4DD2F_AD86_44E6_BA47_FC41E5C0DAAF) is performed before the FindRelatedProducts Action.

  So the DetectAction is not ignored if an older version of the IVI driver is located (looking at the MSI tables clearly was NEITHER).

  Move the sequence numbers of the 103 to 107 behind the FindRelatedProducts Action InstallExecuteSequence shares both InstallUISequence tables (for example starting at 370) will make it possible to do an upgrade of an IVI driver installation.

  This can be accomplished using the Orca tool included in the Windows SDK.

• Driver installation problem Windows XP Home on Satellite L450D-11 t

  I bought a laptop SATELLITE L450D-11 t with windows 7 and I want to use a USB stick for internet, but it requires a previous version of the operating system.
  So I installed windows xp, but on this site, it is not all drivers (motherboard, video, audio, network) compatible.

  Analysis of the situation, I found the driver for audio on the Realtek site but on the mother/video card driver, I have a few problems:
  the AMD 780 G chipset and the display hardware is an ATi Radeon HD 3200. On the AMD website, I found a package with all the necessary drivers, but during the installation of the system restarted itself each time I start the installation. I opened the event viewer to see if there is an error, but nothing.
  I restarted the pc mode provvisional: he can't complete the installation, but it gives an error "Unable to open driver for tracking" or something like that.

  Is there something wrong? I forgot to do something?
  Thank you

  Hello

  Why you n t take an another USB compatible with Windows 7? In my opinion, it would be easier to reinstall the whole laptop but ok, it s your decision ;)

  As far as I know the drivers on page AMD intended for office use only, so I think that they will not work on mobile chips. But maybe the only corrupt the downloaded driver files, then try to download again.

  As I've already said, I would choose another USB key. This laptop is designed for the new Windows 7 and everything should work properly on the new operating system.

• driver installation problem 9171 with LV 8.5.1 and NIDAQ9.3

  Hello
  I just bought a NI9171 with a NI9477 DO Board chassis after checking the compatibility (driver, version LV). Everything seems to be ok, but I can't seem to get the right driver installed in NIDAQ 9.3. I tried with NIDAQ 9.4. Here, the driver has been installed correctly and I have done some tests in MAX, but my DAQmx LabVIEW library has been completely eliminated during the installation of 9.4... Re-intsllation of NIDAQ9.3 brought down the DAQmx library, but the driver no longer works. A thought is to copy the library addition and reinstall 9.4... but when it worked, it is not the right way to solve the problem. Could someone tell me if there is a problem with the Readme of 9.3 or suggest a solution to this problem? Unfortunately I have no shared services provider more and can not get direct support by OR ;-(
  Here you can find the Readme file:
  http://download.NI.com/support/softlib//multifunction_daq/nidaqmx/9.3.0/Readme.html#OS

  Thank you for any suspicion!
  Olli

  Hi Olli,

  Sorry for the inconvenience, but DAQmx 9.3 does not support 9171. There is mistake in our documentation. First, it was submitted to 9.4. However I have a solution for you. It is to install DAQmx components 9.4/9.5's to kernel with support for LabVIEW 9.3 DAQmx:

  (1) uninstall all versions of DAQmx

  (2) install DAQmx full 9.3 and restart

  (3) run the installer DAQmx 9.4/9.5

  a. Select custom, then click Next

  

  b. "Application Development Support", select "do not install this feature.

  

  c. click on through the next few menus until you reach "Start Installation". Make sure that Application Development Support is NOT under the upgrade section

  

  d. continue installation as usual and reboot.

  (5) the DAQmx palette should be in LabVIEW 8.5.1

  Please let me know if you have any question. Again, I apologize for the error.

• Any driver installation problem

  Hello

  I have a problem with installing the drivers for my HP 6360 b - WIN 7 64 bit.

  Fix to what USB, mouse, phone, turn on bluetooth adapter, drivers moved.

  I tried to update the chipset driver with no luck. (installation has not been successful because the driver could not installed)

  Tried Device Manager of hollow manual installation with the result "access denied."

  The event log shows information:

  Driver management concluded the process to install the FileRepository\ driver for the device... instance with the following status: 0 x 5

  I tried installing on domain admin, local admin, account by default. With UAC turned on and off.

  Tried this: http://www.techsupportforum.com/forums/f217/usb-devices-not-loading-in-device-manager-647213.html

  Do you an idea how can I continue to investigate this problem?

  Thank you for all the ideas.

  Tomas.

  Hello Yann,

  Thanks for your help.

  Ownership and permissions allowed.

  Guided by Rami steps solved my problem, even I have not found what it was caused by.

  Just to get through boot and then put under services and applications stratup in order of their importance. After turning on each other, everything works fine.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/error-device-driver-software-was-not-successfully/f1d234f2-d14c-4b0a-A2ac-53fb72fb5357

  Thanks to you all.

  T.

• Optimus driver installation problem

  Hello

  I have a T410s with NVS3100, running Win7 (64). I tried several ways to install the driver:

  -Lenovo Auto Updater

  -Manually run the update download

  -Download directly from http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-76280

  -Right click in the Device Manager, select Update driver, manually choose one of the extracted downloaded drivers

  except for the last one, the installation process works fine, but after the required reboot, the nVidia does not appear be installed to the right. In Device Manager I see graphics card Intel HD and a standard VGA card. It has an error code 10 (could not be started), choosing to update the drivers automatically returns the standard VGA driver is up-to-date.

  What is the normal procedure how (re) install the drivers for all of Optimus (Intel + nVidia)?

  Optimus.

  I was able to solve the problem by using the data in cdrivebackup.wim who came on the recovery partition. I copied the content related to Nvidia in the Windows\System32\DriverStore\FileRepository\ folder and then installed the drivers again.

• HARD drive installation problems

  I have an old Dimension 4600 that recently failed to initialize.  (BSOD appears just after the start screen)  The IDE Diagnostics from Dell (result: failure) indicated that the drive was dead, which was not unexpected - it was the hard original supplied with the system that I've had for 3 years, and I had also been do the BSOD in too many occasions in recent weeks.  The failed drive was the boot drive (master) - the system also has a second IDE HDD (slave) who did pass the diagnostic test.

  I installed a new hard drive and proceeded with the installation of Windows XP.  Installation stops during formatting, with an error message indicating that the installation could not continue and that the HARD drive may be bad.  I have run the Dell Diagnostic and failure of the drive.

  I then pasted the new drive in an other Dimension 4600 (also XP) as the slave drive and it meets the diagnostic test.

  Can anyone shed light on what may be the problem with system #1?

  Thank you all...

  
  

• Satellite A300-24 x: display Win XP driver installation problem

  I can't install the display driver.

  I received the message:

  + This computer does not meet the minimum requirements for installing the software.
  + installation will exit.

  All other drivers are installed.

  Hello

  Satellite A300-24 x belongs to the PSAGQE series.
  It supports the Mobile Intel GL40 graphics chipset.

  On the European driver Toshiba page, you can find the Intel driver v6.14.10.4953.
  Have you installed this?

  Have you installed the Chip Set Utility?
  If this isn't the case, then this!

• Satellite C660 - M21G SM bus controller and display driver installation problem

  Hello

  I recently bought toshiba Satellite C660 laptop M21G with windows 7 32 bit installed (not not licensed) and I installed all the hardware drivers except the SM Bus controller and driver of Nvidia GeForce graphics card, this because it will not terminate on the web site of toshiba, or other medium there but when I try to install the Chipset utility or the display driver (driver VGA) an error message appears in the two installation indicates that I have not matched the software requirments of minimum requirements for the installation of the display adapter and chipset.

  I don't know why these requirments does not include in the error message?

  I have more than 12 hours, trying to find a way to install the display driver, because the standard VGA driver that installed windows 7 (32-bit) is very poor and I can't run any games or smooth video game
  I'm hurt and I need help

  Best regards

  To my knowledge, the Satellite C660-M21G belongs to the series of PSC1SE.
  I m wondering where did you get the right driver for this series display
  The laptop seems to bear the NVIDIA GeForce 315 M card

  I checked the page European Toshiba and not all driver Win 7 32 bit drivers are available on the European driver page I think you tried to install the wrong graphics driver or is not compatible and that's why this error message during the installation of the drivers.

  But it seems that Win 7 64-bit driver is available for this series, that's why I recommend you to test the driver for Win 7 64 bit.
  In this case, you need to install the Realtek card reader controller driver SM bus controller can be the card reader There is also a version of driver Win 7 64 bit on the European driver page

  Simply test the

• Graphics driver installation problems - Qosmio G20 PQG21

  Try to install the latest graphics driver (available on the website of toshiba in the United Kingdom) produces an error message this file NV4_mini.sy is unreadable, even if it's there. Any ideas?

  I tried several times to download and decompression in various places. Incidentally, do toshiba have no technical support at all, or is it left to their customers to provide free of charge to each other - they don't seem to have any method of contact on their site?

  Have you downloaded the graphics driver on the right for the right OS and you're sure you Qosmio G20's series of PQG21?

  Try to download the driver from this page:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  The installation process is very easy. After the decompression of the files, you must start the setup.exe or if missing the setup.exe, you can install the diver from the Device Manager.

• Windows 8 HP LJ2030 Driver installation problem

  I have a HP Laserjet P2035 printer and a brand new Windows 8 computer.  The printer was purchased several years ago and has been used with a Windows XP box. When I joined the printer to the new computer via a port USB<->USB cable, it was not recognized. Manually, I downloaded the driver on the HP website and tried to install it several times without success. I finally found the log associated with the installation procedure.  The following are entered during my last attempt to install the driver by clicking on the app "ljP2035-gdi-pnp-win64 - in .exe:

  [11/08/2013 13:51:35:112] - LOG (1110): PRODUCTInst -.
  [11/08/2013 13:51:35:112] - LOG (1110): InitProperties - retrieve the accessories of the file "C:\Users\Zeke\AppData\Local\Temp\7zS2BFD\properties.ini".
  [11/08/2013 13:51:35:112] - LOG (1110): the Installer version: 1.0.5.3
  [11/08/2013 13:51:35:127] - LOG (1110): - Language ID -
  [11/08/2013 13:51:35:127] - LOG (1110): language of the UI by default = 1033, 0 x 409
  [11/08/2013 13:51:35:127] - LOG (1110): language of the UI system default = 1033, 0 x 409
  [11/08/2013 13:51:35:127] - LOG (1110): user language = 1033 default ID, 0x409
  [11/08/2013 13:51:35:127] - LOG (1110): language = 1033 default system ID, 0x409
  [11/08/2013 13:51:35:127] - LOG (1110): ID of the language to use = 1033, 0 x 409
  [11/08/2013 13:51:35:127] - LOG (1110): Is64BitWindows()
  [11/08/2013 13:51:35:127] - LOG (1110): compiled as app 64 bit so must be on 64-bit Windows.
  [11/08/2013 13:51:35:143] - LOG (1110): operating system is 64-bit
  [11/08/2013 13:51:35:143] - LOG (1110): cmdline "PRODUCTIVE."
  [11/08/2013 13:51:35:143] - LOG (1110):--/-/ \-proprietes-/------------------/.
  [11/08/2013 13:51:35:143] - LOG (1110): PRINT_INFNAME = HP2030. INF
  [11/08/2013 13:51:35:143] - LOG (1110): PRINT_VERNAME = HP2030SU. WORM
  [11/08/2013 13:51:35:143] - LOG (1110): SHORT_PRINTER_NAME = HP LaserJet P203
  [11/08/2013 13:51:35:143] - LOG (1110): PRINTER_SERIES_NAME = HP LaserJet P2030 series
  [11/08/2013 13:51:35:143] - LOG (1110): PRODUCT_VIDPID = vid_03f0 & pid_5d17
  [11/08/2013 13:51:35:158] - LOG (1110): REG_INSTALLKEY = HP LaserJet P2030 series
  [11/08/2013 13:51:35:158] - LOG (1110): ISRUNNING_MUTEX_NAME = HP2030Installexists
  [11/08/2013 13:51:35:158] - LOG (1110): INSTALL_DIRECTORY = HP LaserJet P2030 series
  [11/08/2013 13:51:35:158] - LOG (1110) :-/-/-/--properties-------------/------.
  [11/08/2013 13:51:35:158] - LOG (1110): PRODUCT installation program.
  [11/08/2013 13:51:35:158] - LOG (1110): InstallSequencer()
  [11/08/2013 13:51:35:158] - LOG (1110): InstallSequencer() = 0 step
  [11/08/2013 13:51:35:158] - LOG (1110): InstallSequencer() step = 1
  [11/08/2013 13:51:35:158] - LOG (1110): - InitializeStep -
  [11/08/2013 13:51:35:174] - LOG (1110): GetLandDir - English
  [11/08/2013 13:51:35:174] - LOG (1110): printer inf: C:\Users\Zeke\AppData\Local\Temp\7zS2BFD\\HP2030. INF
  [11/08/2013 13:51:35:174] - LOG (1110): file printer verion: C:\Users\ZekeAppData\Local\Temp\7zS2BFD\HP2030SU. WORM
  [11/08/2013 13:51:35:174] - LOG (1110): name of the printer series: series HP LaserJet P2030
  [11/08/2013 13:51:35:174] - LOG (1110): GetPrinternamesFromINF()
  [11/08/2013 13:51:35:205] - LOG (1110): InstallSequencer() step = 3
  [11/08/2013 13:51:35:205] - LOG (1110): - LicenseStep -
  [11/08/2013 13:51:35:205] - LOG (1110): license file: "C:\Users\Zeke\AppData\Local\Temp\7zS2BFD\\license.txt".
  [11/08/2013 13:51:35:221] - LOG (1110): IDLCDialog:nInitDialog() m_positionOnBottom = 0, m_topmost = 1, m_followPosition = 0
  [11/08/2013 13:51:35:237] - LOG (1110): IDLCGenericTextDlg:nInitDialog
  [11/08/2013 13:51:35:237] - LOG (1110): chaines(): stringsDllPath: C:\Users\Zeke\AppData\Local\Temp\7zS2BFD\strings.dll
  [11/08/2013 13:51:35:237] - LOG (1110): IDLCGenericTextDlg:nInitDialog - text to load the file "C:\Users\Zeke\AppData\Local\Temp\7zS2BFD\\license.txt".
  [11/08/2013 13:51:35:237] - LOG (1110): text is clear
  [11/08/2013 13:51:39:141] - LOG (1110):-[IDLCGenericTextDlg 1 BUTTON pressed].
  [11/08/2013 13:51:39:141] - LOG (1110): StartProgressDialog() g_progressDlgRunning = 0
  [11/08/2013 13:51:39:141] - LOG (1110): StartProgressDialog() from dialog progress thread...
  [11/08/2013 13:51:39:141] - LOG(13A4): IDLCProgressDlg:nInitDialog()
  [11/08/2013 13:51:39:141] - LOG(13A4): IDLCProgressDlg:oDataExchange
  [11/08/2013 13:51:39:156] - LOG(13A4): IDLCDialog:nInitDialog() m_positionOnBottom = 0, m_topmost = 1, m_followPosition = 0
  [11/08/2013 13:51:39:656] - LOG (1110): InstallSequencer() = 4 step
  [11/08/2013 13:51:39:656] - LOG (1110): - PreInstallStep -
  [11/08/2013 13:51:39:656] - LOG (1110): IsDriverInstalled (List)
  [11/08/2013 13:51:39:656] - LOG (1110): IsDriverInstalled (HP LaserJet P2035)
  [11/08/2013 13:51:39:656] - LOG (1110): FindInstalledDrivers()
  [11/08/2013 13:51:39:672] - LOG (1110): PrinterDriver?  HP LaserJet P2035? = Microsoft XPS Document Writer v4
  [11/08/2013 13:51:39:672] - LOG (1110): PrinterDriver?  HP LaserJet P2035? = Microsoft shared fax driver
  [11/08/2013 13:51:39:672] - LOG (1110): PrinterDriver?  HP LaserJet P2035? = drive compatibility point and print more Microsoft
  [11/08/2013 13:51:39:672] - LOG (1110): PrinterDriver?  HP LaserJet P2035? = HP LaserJet P2035
  [11/08/2013 13:51:39:688] - LOG (1110): found driver
  [11/08/2013 13:51:39:688] - LOG (1110): PrinterDriver?  HP LaserJet P2035? HP ePrint =
  [11/08/2013 13:51:39:703] - LOG (1110): current verion printer file: C:\windows\system32\spool\DRIVERS\x64\3\HP2030SU. WORM
  [11/08/2013 13:51:39:703] - LOG (1110): file Web bundle printer verion: C:\Users\Zeke\AppData\Local\Temp\7zS2BFD\HP2030SU. WORM
  [11/08/2013 13:51:39:703] - LOG (1110): ===>>> (gle = 2, 0 x 2) ERROR: Msg: the system cannot find the specified file.

  Context: Could not open the file of version ' C:\Users\Zeke\AppData\Local\Temp\7zS2BFD\HP2030SU. WORM '
  [11/08/2013 13:51:39:703] - LOG (1110): Web bundle is older than the current 20120627 (3.0.1.52444)
  [11/08/2013 13:51:39:703] - LOG (1110): driver currently installed, but newer than the web package.  NEED NOT UPDATE!
  [11/08/2013 13:51:39:703] - LOG (1110): InstallSequencer() step = 7
  [11/08/2013 13:51:39:703] - LOG (1110): TerminateProgressThrd (0x44a110)
  [11/08/2013 13:51:39:719] - LOG (1110): _PostProgressMessage hWnd = 0x1402c2 msg = 1124, param = 0
  [11/08/2013 13:51:39:719] - LOG(13A4): IDLCProgressDlg:nTerminate()
  [11/08/2013 13:51:40:235] - LOG (1110): - FinishStep -

  The log entry indicates the driver already installed but the Windows Device Manager seems not to think (see attached image). By clicking on 'Properties', then on 'Events', I saw the following message (see second image). I have no idea what this error code means. Can anyone provide some ideas of what I can do next? I hate the idea of making a new printer, if there is a software solution. The printer still works fine.  For what it's worth, through the Windows Device Manager, I uninstalled the printer and driver once already in order to get a clean installation of the driver.

  Thanks for any help,

  Zeke

  Fixed. "Follow-up"clean boot"as described here: 'http://support.microsoft.com/kb/929135 ' Windows recognize it now and I can use my printer.".

• Range of printers HP C4860/driver installation problems - no driver? / will not scan

  Yesterday, after some small problems printing and indications that there may be a driver problem, I reinstalled the full software and drivers from the HP website.  When installing to the step where you plug in the usb cable, the software would not recognize the printer (even though XP recognized it and it was listed in the hardware of the system).  I downloaded the troubleshooting program and ran the scan.  He stopped at the level "pilot" and would go no further.  I tried to reinstall the software several times on the site (full and short versions and also on the CD) but still no luck.

  Symptoms: I can print from a variety of programs (Open Office, web, Notepad, MS Paint, etc.).  Can not scan from printer touchpad or computer.  Screen HP Solution Center shows only the option "transfer of images.  Help!

  wbyberg

  Hi wbyberg,

  Can you run a restore point back to a date before the execution of this solution to see if the printer is working correctly?

• HP Officejet software 4620e Windows XP SP3 and the base driver installation problems

  I am running Windows XP SP3 and installed the software the printer HP Oficejet 4620e and, when it is finished installing, all I see are two pages of text of the code.  In addition, the printing software disables my wireless network connection and I need to fix the adapter wireless network at regular intervals.  I uninstalled the printer software and installed 4620e HP basic driver software that HP offers as an alternative for computers that cannot use the full package.  I get the same results with the HP basic driver package 4620e as with the complete software package (two screens of text of the code).

  Please help.

  _________________________________________________________
  JOHN

  The reason why the pages are open as code is because something has changed to the association of files of these types of files.  The discussion below describes the problem on a 6520 and offers a solution for it.  Try this patch and let me know what happens.

  HP Photosmart 6520 "printer assistant" will not work

  The problem with the printer lock up your computer is caused by ink alerts defined as always, and because the analysis of the functionality of the computer is turned on.  The document below will guide you through fixing the problem.  Let me know what happens.

  Printer loses the network connection in Windows XP after the computer is turned on for four to 12 hours

• The HP printer driver installation problems

  I downloaded the driver for my HP Photosmart 7760 printer on my Acer Aspire, but it will not run or recognize my camera, even with the USB plugged in. I was able to do this a month ago, all I need, it was the USB cable to connect to print. Recently, I had my phone reset to factory due to a problem of camera settings. Now I can't install the driver of printer as before, and the same diagnosis he didn't work. Anything else I can try?

  Hi Tiana_XC,

  Welcome to the HP forums!

  I see that you are working with a Photosmart 7760 and having problems to print now, but a month ago, it was printing OK. I'm sorry to hear that, but I'll certainly do my best to give a helping hand

  What version of Windows is on your laptop?

  It is possible that you need to run your Windows updates to get the printer installed correctly after being reset to the factory settings. The method that this printer is installed through the most recent operating systems is through the updates of Windows, so I'll propose to run those and try to hook the printer again.

  Hope to hear from you soon... If all goes well with good news