Photosmart 6520 scan

Similar Questions

• HP Photosmart 6520 printing/scanning: how to transform pdf option highlighted in photosmart 6520 scans

  I have pdf scans successfully using HP Photosmart 6520 printer/scanner but can't find and cannot activate highlight when I read them in Adobe Acrobat Reader ms. I do not know if 32 or 64 launches WIndows 10. Thank you

  Hello

  No, you can't. You need to analyze as searchable text and your photosmart 6520 does not have OCR software (when you bought this printer) in support. You can buy an OCR software.

  Kind regards.

• Photosmart 6520: Scanning several pages in PDF

  I'm trying to scan multiple pages into a single PDF. I read the help document - which States that to add pages, click on the button '+' to the left. However, my software does not display the button «+» I have the latest version of the software. What is happening with this?

  Hello

  It seems that the software is not completely installed. My suggestion: re - install the full feature software and drivers for your printer.

  Kind regards.

• HP 6520: HP Photosmart 6520 does not scan to e-mail. Also does not seem to update the PIN code

  I have scanned in the mail in the past but cannot now to. I get a 403 error. Also the printer doesn't seem to change the PIN code I was sent. Empty the password, it displays about 10 asterisks

  Hi @cjmrnanp

  Welcome to the HP Support forums. I understand that you get a connection error message when you try to use your printer Photosmart 6520 scanning e-mail.

  Please define Manual of the printer an IP address manually and DNS servers. If you do not know how to this I have included a link to another post which has measurements, including screenshots, on how to do it. Please do not worry that the screenshots show a printer Photosmart 7510, the steps are the same.

  Once you have set the IP address manually, you still have the same problem with by entering the PIN code?

  Please let me know the results.

• Toshiba Satellite C55-B5362: how to scan multiple pages in a 1 paper for printer HP Photosmart 6520?

  I use Windows on a Toshiba Satellite C55 B5362, 64-bit version 8.1 and have printer HP Photosmart 6520.  This is a new printer for me.  I have scanned multiple documents to discover that they were recorded on the computer individually instead in a single document.   How to scan multiple pages in 1 document?

  Thanks for any help!  Please let me know if any additional information would be helpful in order to answer you.

  Hello dru98,

  Please click HERE to access the procedure which should solve the problem.

  PS: Expand ""How to scan with HP software " and"How to scan an original of several page into one file " "

• Photosmart HP 6520 all-in-one: Photosmart HP 6520 Scan to computer function doesn't work is not after the driver download

  After that our latest operating system updated, our HP Photosmart 6520 had scanning problems.  Usually a reboot or as part of the scan on the HP computer would work.  Today, I downloaded the latest driver in the hope that could solve the problem.  Now the scanner is not recognize the computer, and I can't enable analysis of the it function with HP on my Mac utility.  The print feature works very well.   This message I see in the HP utility:

  "The HP software required for the Scan of the computer could not be located on this computer. Please download and install the latest HP recommended software for your device to http://www.hp.com/supportand then try again. »

  I searched HP website, but I can't find anything other than the driver I downloaded for Mac OS X 10.10.

  What can I do to get my scanner up and running again?  Thank you very much for your help!

  Hi @kjnowicki

  I want to help you with your scanning device.

  We will reset the printing system, repair disk permissions, add the printer using the driver and try to start a new search.

  Reset the printing system

  1. Click on the Apple icon ( ), then click on System Preferences.

• Can not scan to computer w/new HP Photosmart 6520

  -New HP Photosmart 6520 was installed 2 days ago. ePrint successfully as well done. I can scan to an email via eprint, but cannot parse the document to my computer. The message of the printer tells me there is a USB connection error.

  -J' quit and connected a new USB cable and still nothing!

  -Also, I see that in my programs that the only thing listed in the HP 6520 folder series is the product of the studies and nothing else.

  -Is the reason why I can't scan to computer?

  Hello

  Please turn on your computer (Windows) computer analysis:

  (a), double-click on the icon on the desktop.

  (b) select the Scan of the computer,

  (c) click on Enable

  d click OK/apply.

  You can also click Start with Windows.

  Kind regards.

• How to scan color PDF with Photosmart 6520

  How to scan color PDF with the Photosmart 6520? They only appear on my Mac in black and white and I don't see any option to specify the color on the device.

  Hello
  The workflow default scanning set up to scan documents in black and white. Be sure to change the settings for scanning to scan color documents:

  1 open the HP utility and select your device.
  2. based on Scan Settings open the "Scan to Computer".
  3. click on the tab scan tasks.
  4. Select the affected shortcut and click on change... (or double-click on the shortcut).
  5. in the section of scanning from an HP device, click the blue triangle or button view details to expand the menu.
  6. in the expanded menu now, open the drop-down next to the Mode
  7. now select the color option, and then click OK to save the changes. The next scanned using this workflow is displayed in color.

  Kind regards
  Shlomi

• Photosmart HP 6520: HP 6520 scanning in black and white

  Hello

  My HP 6520 scans in color black and white docs.  I read the various messages from others who have similar problems and have downloaded the latest drivers on the Apple site.   When I open the HP utility and navigate to "Scan to computer" and 'Modify tasks analysis' I find the menu only 2 items I can interact with are "Document (PDF)" and "Photo (JPEG).

  When I press the button Edit, I get a submenu that I can develop to show the type of device, the presets and exit.  When I select the "show details" button, I get only one bar for me to choose the quality in which items can be scanned.  I don't see the Mode option that should allow me to select Save in both black and white.

  Please can you help me with a few tracks here - thanks in advance.

  Hi Waterboy71

  I carried out the tasks that you recommended and there is a degree of progress, while getting only not in a fully satisfactory place.

  Certainly the HPScan shortcut on the desktop icon will allow the scans for color photos but the documents in PDF format are in black and white.

  However, if I take the longest walk around the system, select the printer in the printer options and select scanner in that, a submenu opens and I can propose to scan in color, if its for documents or pictures.

  Is not as simple as it used to be, as I didn't have to do that before - maybe it's a result of a system of 'upgrade' somewhere along the way.

• Photosmart 6520: New computer, Windows 8, need to put a shortcut on the desktop just to scan

  I just installed my printer on my new computer, windows 8.1 software.  I want a separate desktop icon just to access my scanner.  How can I do that.  I had a separate on my Vista Home Premium.

  Help!

  Hello

  Open Windows Explorer and navigate to the C drive.

  Navigate to C:\Program Files Photosmart 6520\bin for a 32 bit OS, or C:\Program Files (x 64) \HP Photosmart 6520\bin for a 64 bit OS.

  Right-click on the HPScan.exe file and then click Sendto > o your Office Desktop, a shortcut will be added.

  Kind regards

  Shlomi

• HP Photosmart 6520 assistant printer error

  I have the printer Photosmart 6520 on the ip address and running windows 8.1

  When I run the wizard of the printer for scanning on side Windows everything works fine

  BUT when I do the desktop option and then try and run the option of analysis (using the Printer Wizard) he wants to re-setup every time.  I went online and downloaded the whole printer for windows 8.1 and still get the same error.

  It was working fine and all of a sudden it started to happen, and I have not loaded something new lately.

  No one knows how to fix?

  Thank you

  Hello JonHayward.

  I understand your concerns. It seems that your printer software has a conflict. Please follow these steps to try to solve your problem:

  Uninstall your software from the control panel of your computer. I'll give you a document here, HP to help achieve these steps.

  Then clean your Temp folder on your computer. I'll give you a YouTube video on this step here.

  Before installing the software on your computer, please follow this HP document using Microsoft System Configuration. Only perform the Figure 2, Figure 3 and figure 4, but exclude number 5 in the present document. Perform no other action.

  Now, install the full software features from the CD or the Web HP heresite. Please choose your operating system that is appropriate; 32-bit or 64-bit.

  Subsequently, perform step 5 in the document "using Microsoft System Configuration ' . This will allow the normal start upward.

  Please send me your troubleshooting steps.

  Good luck.

• Photosmart 6520: windows 10 and photosmart 6520e

  Y at - it an update of the pilot of the aircraft photosmart 6520 for Windows 10.

  I would like to download the driver before upgrading the OS.

  When I try to download a driver from your support page (which seems to be a pkg to win 8), it won't download - unless I have install the GWP of solution of support I don't want to do.

  I want just the pkg of drivers and software

  Hello @maxie987,

  Thanks for posting in the Forums of HP.

  I want to help you in your investigation of Windows 10 drivers for e-all-in-one printer, HP Photosmart 6520.

  Windows 10 has the same functions of basic Windows 8.1 operating system, so you can actually download and install the drivers for your system Windows 10 8.1 Windows.

  Please note : If your device had fully supported (not just basic printing or scanning) in Windows 7 or 8 then your device is supported, but may not immediately appear on hp.com for Windows 10: Please download Win8.1 drivers and use them (they have been tested and have worked with Win10)

  -Source

  If you are having problems with the installation package, try to download and run the HP printer installation wizard and it will download the correct software for you.

  I hope this helps!

  

• Photosmart 6529: Scan to a folder

  Please excuse my lack of knowledge, but seem to be going round in circles trying to find an answer!  It may be a coincidence, but since upgraded my PC to Windows 10, I don't seem to be able to scan to a folder.  The only way is to scan to e-mail, receive email, and then save the scan.  Can someone explain in simple terms how can I select a folder to scan to or even just go in the scanned Documents folder.

  Thanks in advance.

  Thank you very much thank you for getting back to me. I would like you to follow the steps below:

  1. disconnect the USB key if you use a direct connection.

  2. remove the HP Software PS 6520 uninstall from the control panel of your computers an option of the program.

  3. restart the computer.

  4. make sure that all them that software PS 6520 has disappeared from the list of programs, but also your HP folder listed under all programs in your Start Menu.

  5. now, go ahead and download the software and drivers for your PS 6520 (DO NOT connect USB until the software prompts you to):

  http://support.HP.com/us-en/drivers/selfservice/HP-Photosmart-6520-e-all-in-one-printer-series/5169038/model/5169040

  6. go ahead and print a test page.

  7. do not forget to re activate the computer Scan-to-option

  8. If you are unable to print a test page, run the HP print and scan doctor > www.hp.com/go/tools

  -It has been designed by HP users troubleshooting and problems characteristic needed to solve many common problems encountered with HP print and scan products related to Windows computers.

  Thank you for being a part of the community of HP. Please let me know if this helps solve the problem by marking this message as "accept as Solution" . If you need more assistance let me know and I will gladly do whatever I can to help. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

• Photosmart 6520: can't get 2 sides Preset to save

  I use this printer connected by USB to an iMac running OS 10.9.5,, but this isn't a new problem.

  I want to print my bank statements using this configuration: double-sided and odd pages only.  I can't get this save as preset. It seems that when I try to save the current settings as a preset, the margins of Destination Size:U.S Two-Sided Letter paper nor the duplex option are registered.  I also tried to use Long Edge binding and which will not save either.  The same problem occurs if I print in a Safari window or if I save the document in PDF format and try to print from an excerpt.

  I have no problem getting the desired result for a single document, but I don't want to change the settings every time I want to print.  Isn't this why we have Presets?

  Is this a bug of driver?

  Hello @TigerMO,

  I would like to help you today with presets for printing problem you encounter when you print to your HP Photosmart 6520 e-all-in-one printer Mac OS X 10.9 operating system. Because your driver is unable to "Save" Presets for future use, I'll run you through a series of software and driver TROUBLESHOOTING steps below to resolve this issue.

  Step 1: Resetting the printing system:

  To begin, I will have you reset the printing system on your Mac. Please click herefor instructions on how to perform the reset. When the site opens, follow the steps under"Reset printing in OS X Lion system" because the steps are the same for Mac OS X 10.9. This Reset deletes each printer on your Mac. However, it does not uninstall printers. Therefore, if use you other printers on the Mac, once the reset is complete simply make sure printers are attached via a USB cable or connected network and (+) add hide them po do add not your HP Photosmart back in right now.

  Once the reset is complete, proceed to the next step.

  Step 2: Uninstall the drivers and software:

  Please click here to find out how to properly uninstall your printer. Once the site opens select the drop down menu 'Mac OS X v10.6, OS X v10.7, OS X v10.8 and OS X v10.9' and follow the steps to complete uninstallation.

  Once the uninstall is complete, please continue on.

  Step 3: Check and repair your Mac disk permissions:

  1. Open Macintosh HD and go to Applications
  2. Go to the Utilities folder
  3. Open disk utility
  4. Select the hard disk volume, you use (usually on the left)
  5. Select verify disk permissions
  6. Once this process is complete, select repair disk permissions

  Step 4: Check the Apple updates:

  1. Go to the Apple
  2. Select System Preferences
  3. Select software update
  4. Click update now
  5. Install your available updates
  6. Computer restart

  Step 5: Reinstall your software and drivers:

  Finally, please click here to download the driver package for your printer. Once the site opens, select the download button at the top left. Once the download is complete, please follow the instructions on the screen to install your printer.

  Once your printer is added in, check the driver to make sure that the driver of the HP Photosmart camera is used and not the driver Apple AirPrint.

  1. click on the menu of Apple , then Preferences System.

  2. click on Print & Scan and then check if the name of your printer appears in the printer list.

  3. click on the name of your printer, click the sign minus (), then remove the printer.

  4. click on the plus sign (), click Add a printer or a Scanner, click the name of your printer.

  5. click on the area of use or with the help of Print and then select the name of your printer on the shortcut menu. Ensure that the Photosmart driver is selected.

  

  6. click Add to add the printer to the list.

  Once the printer is properly added to, please try to save printing Presets again to check if the settings to stick this time.

  Please reply to this message with the result of your troubleshooting. Good luck!

• Photosmart 6520 disorder registration for eFax

  I just bought a Photosmart 6520 and try to install eFax.  I clicked on the control panel of the product and have found the button setup eFax tab printing & scanning (as directed by the instructions included with my printer).

  When I click on the eFax Setup button, my browser opens on the creation screen / connect you account for eFax:

  https://www.eFax.com/promohp?v=1&TP=HPSW&locale=en-us&Eid=2E59A7DADE79BD7E76D7B50DD2D4133001B0ACA2

  The 'Create new account' button is grayed and I'm unable to create an account.  The button "Connect to eFax" is red (active) and I am able to click on it to log-in. However, since then I've yet to be able to create an account in the first place, there is no account for me to connect to.

  Product: HP Photosmart 6520

  Operating systems: Windows Vista 64-bit

  Browsers:

  Google Chrome Version 25.0.1364.152 m

  Internet Explorer Version 9.0.8112.16421

  Mozilla Firefox Version 3.6.22

  NONE of the browsers all worked differently

  Help, please!

  Thank you.

  After much research, the only solution I found was to call HP Cloud Services @ 1-855-785-2777.  HP then degenerates the Efax number.  They then plan a time to remind you of your fax number and the password to use.  This has probably happened to 6520 users.  It was set long rather than having the customer go through research, emails, phone calls and waiting for a fax number.