Driver instruments CVI import in LabView 8.6

Similar Questions

• How to use Extech Instruments model 407123 with Labview 7.1

  I'm pretty new to Labview.  With the help of this forum, I was able to configure my DAQpad 6020E with my Labview 7.1.

  Now, I'm looking at using an Extech Instruments Thermo-anemometre to hot wire (407123) in my experience and it works through Labview.  According to my research, I was led to believe that I have to use the Instrument i/o Assistant and NI-Visa, but I'm having a lot of difficulties.  First, the thermo-anemometre is wired for a RS232 interface and I connected to an interface RS232 converter USB, which is then plugged into my computer.  I have the driver for the converter.  When I plug the thermo-anemometre into my computer, MAX it reads as a serial port and it is listed as COM3.  MAX argues that the device works properly.  However, when I run e/s and Labview Instrument wizard say to read the data, I get an error of bff0015 and it says that the device has expired.  I tried to change the time and I still get the same error.  I guess that means that Labview and my device are not communicating.

  I saw a mention of the pilots of the instrumentation, but I could not find my particular device.  I guess that's the root of my problem and that if I had an instrument driver to run my device in Labview that it works correctly.  So here are my questions.

  (1) what should I take data by a third party thermo-anemometre in Labview?

  (2) am I correct in thinking I need some kind of driver instruments?  And if so, where could I find one (I have already searched for one and he did not)?

  (3) is possible and practical to take data through an instrument of party DAQpad Labview and a third at the same time?

  (4) are there guides or tutorials that I could use that can show me how to do what I'm doing?

  Thank you.

  
  

• How can I get Windows 7 to read RAW hard drives without having to format the hard drive due to important work on this subject?

  Original title: the file format of external hard drive is the RAW and not NTFS. How can I get Windows 7 to read RAW hard drives without having to format the hard drive due to important work on this subject?

  I put the hard drive on an XP and Vista machine and can read the hard drive, but not with Windows 7

  Hi Zling,

  It works on other OS? When did you finally read the disc and with what OS? If you can read the drive and make a backup of the data on this subject, I you suggest to backup the data on the drive and then put it in using the NTFS file system.

  I hope this helps! Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Action Center reports an error that reads "reconnect your drive, it is important."

  Action Center reports an error that reads "Reconnect your drive, it is important," the history of your files was disconnected, too long. to keep save copies of your files, reconnect your player an n, then run a backup.  Any help?

  Thank you

  I noticed that my D drive (sd card) drive back unknow question under him? I can put it is not to back up files from the file history and I don't get an error, but I prefer to have connected and backup my files... I hope someone can help.

• I installed lightroom on a new computer (windows 10) cc. I copied all of my original photos on a hard drive and them imported by adding them on the new computer using the import function. I have a catalog update saved on thehard d

  I installed lightroom on a new computer (windows 10) cc. I copied all of my original photos on a hard drive and them imported by adding them on the new computer using the import function. I have a catalog to date backed on thehard drive and have tried to insert into the new folder to lightroom. Unfortunately none of my changes, collections etc. seem to be present on the new computer. I still work lightroom with any changes on the old computer where all the photos. Help

  He seemed to have solved this problem - the catalogue of the old computer has been saved as a zip file. Once extracted, it could be used as the primary catalog for lightroom on the new computer

• To the installation of custom (my) Labview drivers created using system driver instruments LabView 8.2

  I spent the day writing a driver for my new general i/o board for LabView using the creator of project pilot such Instrument indicated on the latest LabView tutorials. It works fine on my computer, even incorporated in the Panel 'Instrument i/o' on the toolbar. Really great.

  But! This must obviously be something that I can publish on a Web site or email to people for them to install on * their * computers! I tried to use the configuration settings as described in another tutorial in order to produce a zip file, a source folder and a Setup program. However, none of these export options seems to produce a labview library that can be opened without nasty error message on the files being found. Of course, the files are present in the directory, but it is looking for them in the * original * folder instead of either the file installation or a folder in a directory from the file to the library. It's really quite absurd, so I guess I'm doing something wrong... but I can't find information on how to do this right. When I followed the instructions I can find, it does not at all.

  What I * should * was that, if I created an installer, when an end user with LabView installed ran the installer it would integrate the new Instrument of e/s vi in their panel of LabView. But this does not happen. In addition, when you look in the installation directory (by default not the LabView directory), but a directory in Program Files/driver-name all the files are there. But if you open the library in the directory of the Volume, he complains about the vi being in the wrong place, then load them in the wrong place.

  It seems clear that the behavior of the installer must be to put the appropriate files in the location where LabView research instrument drivers. That is not that this disturbs the bajeezus out of me. Can someone explain me or give me a link to the instructions how to accomplish this feat apparently obviously necessary? I can possibly download my driver to the network NOR, but I want to at least test it out first!

  I've attached a zip file of the installation directory, which I do not understand in the runtime environment for reasons of size. I've also attached a zip file of the original directory. It won't work unless that place in the correct location in the folder of LabView. He probably has an older version of I've been using the build options.

  I think I got this figured out, maybe, others may use the solution.

  On the "Source Files" category in the specifications of construction for an installer, [LVDIR] represents the LabView installation directory. So, if you create the directory instr.lib under [LVDIR], you are installing in the root directory of the instr.lib. Then, create another folder named identically in your project source directory (so that it can find the files) and mark in the installation directory. On the side of the project view, open 'My computer', choose your lvlib on the left and your installation on the right directory and click on the right arrow between the two panes. This will create an installation directory structure in the correct location on the target.

• Attend for Instrument i/o for Labview 2009 trial?

  I use the Evaluation Version of LabView 2009.

  Unfortunately, the Assistant of the Instrument-I/O is not currently available.

  If I try to add an Assistant for Instrument-I/O-Express-VI (exit), I get an error message telling me that the Measurement & Automation Explorer or assistant for Instrument-I/O has not been installed correctly. The Measurement & Automation Explorer is installed.

  Is it possible to use this Express VI into the evaluation version?

  Hey,.

  The Instrument of e/s assist is part of the VISA driver.

  Just look for the latest Version of NI VISA or the DeviceDrivers under ni.com (drivers and updates).

  Christian

• How to search a file .csv for data using its timestamp, then import into labview

  Hi, I am currently get density, viscosity and temperature of an instrument, adding a timestamp data and write to a .csv file that I can view in Excel. It works very well (see attached code) but reimport what I have to do now is search this csv file of data that has been obtained at one time, temperature, density & the values of viscosity at the moment in Labview to do some calculations with them, so that the data acquisition process is still ongoing.

  I found several examples on how to import a CSV together in labview, but none on how to extract data at a specific time. Also, every time I try to do anything with the file .csv for my data acquistion VI is running, I get error messages (probably because I'm trying to write and import data from the .csv file at the same time). Is there a way to get around this, perhaps using the case structures?

  If you need to know my skill level, I use LabVIEW for a few weeks and before that have basically no experience of writing code, if any help would be great. Thank you!

  TDMS is a little more complex than that.  Here is a proof of concept quickly lifting together:

  

  You should look at some of the examples of read/write TDMS to get a better handle on the tool.  While I should...

• Copy of photos and vidoes on external hard drive to Windows import

  Hello world

  & Thank you in advance for your help!

  I want to export my external library from the Photos App on a hard disk and then import them under MS Windows.

  The library contains photos and videos. So far, I have tried two ways:

  1 copy the entire library on an external hard drive

  2. in the Photos app, select all the pictures and videos to YouTube and copy on the external hard drive

  However, no matter what I tried not all my photos and none of my videos have been exported.

  Can someone help me please!

  Thank you

  Alex

  Here you have a guide for moving files from Mac to Windows PC: http://www.laptopmag.com/articles/move-mac-files-windows-pc

  Make sure that your external drive is formatted in BOLD ex.

• Intel pro wireless driver fix security - important or not?

  Dear Sir, on the Dutch version of zdnet.com (www.zdnet.be) are advised to users of computers laptop centrino with pro wireless hardware intel to protect the driver with a security patch. Can you advise us on that? Do you really think it is necessary to use this patch?

  Thanks in advance

  I use a tecra M, 1.8 Ghz, WXP pro, intel BG2200 wireless pro

  I understand the English version of this article: http://news.zdnet.com/2100-1009_22-6101488.html
  Dr. Weekx R

  Hello

  I m only a Toshiba user engaged and I don t know if this patch could be important. But I think that each update of Intel or Microsoft should make the software better and safely.

  But I don t found the officer on the page information this update Toshiba.
  However if, after this update, something goes wrong, so you can use the Windows XP System Restore utility to reduce the BONE to this early time

• Collection of data from more than an instrument via the same labVIEW program

  Hello

  I have a program whereby I collect data on a scale of and save the data in the text file. Now, I need to collect data of three identical scales and save the data. I wonder if it is possible to do so in the same program? I mean how to manage three ports and save three different text files?

  I enclose the current program. Communication with the scale series and I use VI:s. thanks in advance for the help = VISA)

  

  This is easily possible with a single program, and there are several ways to do so.  I recommend the following:

  1. Take data from these devices in a separate loop (this could be in a separate - VI, as well).  These loops should be state machines if you can start and stop the acquisitions in a clean way.  This assumes that the instruments are on separate ports.  If they are on the same port, you probably want to use the same loop.
  
  
  2. Write to the file in a single loop.  This, too, should be a state machine.
  
  
  3. Queues to send data from the acquisition of loops to the loop of file I/O.
  
  
  4. Use still another loop for your user interface.  It must contain a structure of the event.

  To do this, you will need to learn more about the State machines and producer/consumer architectures.  Start with the help of LabVIEW, then search these forums.  There are a multitude of implementations of State machines and producer/consumer architectures.  If you have the time, I highly recommend you learn and to use the classes in LabVIEW (requires LabVIEW 8.2 or later).  This will facilitate your work in the long term.

  Let us know if you encounter any problems...

• Excel string cannot be imported into labview

  I want to import column names in excel in labview by copying strings excel and after sticking to the string constant and to convert an array of strings. But labview out a digital picture. I checked the format type. It is just but labview show them all 0. Why? What's wrong?

  It is here,

  Let me know if you need help

• NI DAQ driver for several versions of LabVIEW

  Hello

  I installed 8.0 LV and LV8.6 in my PC. I installed DAQ 8.8 and this is is detected at LV 8.6 and not at 8.0 LV. So I tried to install DAQ 8.6 supporting LV 8.0.While installation appears that a more recent version of the data acquisition driver is already installed.

  I want the DAQmx functions in LV8.0.

  Is to uninstall the latest version of the only option for the acquisition of data?

  Anyone outthere facing this kind of problem?

  Thank you

  Niju

  Yes, you will need to uninstall the higher version. The drivers do not simultaneously work with several versions such as LabVIEW.

• music past PC from XP to Vista PC and more will no longer play in the drive media or import into itunes

  I transferred a large amount of music from my work (XP Dell) computer to my home laptop (Dell Vista) via an external hard drive.  About 3/4 of the music now will not import into itunes (nothing happens at all when I try to add or drag the files on), and Windows media player will not play them.  He complains about the codex or file extension.  I is not the exact message at the moment but you can get it later.
  The songs will play in another free player I downloaded (I don't remember who it was but can find out (I'm not on my laptop now)).
  I've had this problem for a year or two and thinking of upgrading to Windows 7 just if I can access my music again, but don't know if it will even work and prefer not spend this money if there is a solution under Vista.
  The files are a mixture of types, some were given to me and others that I transferred via CD myself.  I have all the original CD or files. Each of them has played without problems on the XP PC.  When I got this problem, I sent one of the files from my Vista computer on an XP machine and it played smoothly on this point, so it seems not that files have been corrupted.  It seems to be a Vista problem that also affects good windows media player and itunes.  I want to be able to get the songs in itunes, so I can listen to on my Ipod.
  Any help gratefully received.

  Hi Rachael_964,

  I suggest that you follow the section provided below and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

  Because of itunes, you can contact itunes support for more help and information.

• Is it possible to copy my original files with a backup hard drive with re-import them?

  I'm doing a copy of external backup everything on a hard drive, I can work from. I saved the backup catalog on a new hard drive and I can copy my originals to the new hard drive outside of lightroom, but I don't know how to get lightroom to be able to work the new copy. What I have to re-import everything? I also tried 'Find missing folder' but then she moves the folder to the new hard drive and I don't have two copies of work.

  I use Lightroom4. My original files are stored on an external hard drive. I don't know of anyway to copy files into lightroom.

  Thank you

  Since then, we discussed backups... I think it's a mistake to use your backups of your photos and use your backup catalog files. In my opinion, when you perform a backup, you should leave here on intact and unused backup disk, for ever and ever, except in the case where your originals get destroyed or damaged somehow.

  So, if you really want to use your backups in the way you described - don't. Very bad idea. And if you go ahead and do it anyway, then Yes, you must re-bind the missing files every time you go.