Cannot start in normal mode.

Similar Questions

• infected file ndis.sys deleted by AV. system cannot start in normal mode

  Recently has been infected by the worm. I cleaned my system using AVAST! 5 using startup scan. After the cleaning, some system files have been marked as being infected and I sent them in quarantine. NDIS.sys was also one of the files including kernel.dll and the other two dll files I could not remember the exact names. Shortly after my system can start is no longer in normal mode. What should I do next from here? Should I try and replace the files quarantined or should I just reinstall my OS? Or there are other options I can try? My OS is XP Pro SP3. Laptop barans is ACER TravelMate 4150.

  Recently has been infected by the worm. I cleaned my system using AVAST! 5 using startup scan. After the cleaning, some system files have been marked as being infected and I sent them in quarantine. NDIS.sys was also one of the files including kernel.dll and the other two dll files I could not remember the exact names. Shortly after my system can start is no longer in normal mode. What should I do next from here? Should I try and replace the files quarantined or should I just reinstall my OS? Or there are other options I can try? My OS is XP Pro SP3. Laptop barans is ACER TravelMate 4150.

  NDIS.sys probably wasn't a legitimate file. See the links below.

  http://www.systemlookup.com/search.php?type=filename&client=malwaresearch-FF&search=NDIS.sys

  http://www.Microsoft.com/security/portal/threat/encyclopedia/search.aspx?query=NDIS.sys

  You say that your system may no longer boot into normal mode. That means he can start in safe mode? What happens when you try to start it in normal mode?

  I do not vote for me I'm not here for points. If this post helps you, vote. Visit my forum @ http://repairbotsonline.com/

• Cannot start in normal mode - will start in safe mode.

  Original title: laptop does not charge on CD only works in safe mode

  Laptop will not load on CD only works in safe mode

  I have a compaq presario c700 laptop computer does not load the operating system and goes directly to the start of the repair screen. From the start, I have Windows could not start. A recent hardware or software change might be the cause of the message... I tried the system restore. I can only access it through safe mode. I can't solve the problems with one of my CDs such as fix it utilities, Hi Jack this etc... I copy everything on the drives to an external drive. Suggestions as to how, I can start over with this laptop?

  Hello

  If you have backed up your data, press F11 at startup to start the process of recovery back to factory settings

  It is normally the button in HP products

  and read the information on the usual ways to reinstall vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• T510i cannot start in normal mode (safe mode of work only)

  Hi all

  As the title, when I turn on my laptop, it come to the logo of the window and then restart all of a sudden. And screen come to choose Safe mode. My computer can work in safe mode. After I restarted several times, it may come to Windows successfully. Then, he suddenly restart and return to select the safe mode screen. (Windows 7 installed).

  Please help me find the solution. Thank you very much

  Dear all,

  My problem is solved already. Mainbroad now is repair.

• Why I can't get online in safe mode with networking? Does not start in normal mode.

  I can't get my computer starts in normal mode.  It starts only in safe mode.  I can choose the mode safe mode with networking so I can get online, but that's all... just safe mode.  Can I do to solve this problem?  I don't have a lot of money and a new computer is not an option at the present time.  Any help out there?  I have also no sound.  I tried to reinstall my windows xp, but it won't let me.  I have XP Pro and SP3.

  Hello splunk2011,

  Please contact the Microsoft Answers forum with this problem!

  After reading your post, my understanding of the issue is that you are unable to start in Normal Mode and as such, cannot be online within Mode safe mode with networking.

  Because we can start in Mode safe mode with networking, this tells us that a driver or a program from loading at startup may cause the problem.  To solve this, I would try a clean boot.

  More details about this is located at the following link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Let us know if this helps solve your problem.

  Best regards

  Matthew_Ha

• My 8 victory... infected with the virus cannot start in safe mode...

  recently, my computer of windows 8 has a virus... (miss click an ad pop up and it's on the computer)

  I already got Malewarebytes Anti Maleware and installed AVG, but this virus that bypassed and infected my computer. I tried the standard F8 during startup to go into safe mode and run my anti virus scanners, but apparently it does not work in windows 8. Some say SHIFT F8, that does not work either. Also any other method of setting up safe menu starting boot or mode does not work as it should connect on the desktop to go threw the settings and activate it for the next boot upward. This does not work for me since the virus I have apprently made my fall display driver, after I get my user password to start the desktop computer, so I don't see anything but the pointer of the mouse, everything is black. Y at - it another way to start in safe mode or trigger a recovery system or restore without actually being on the desktop?

  Why windows might change?

  I already ordered a recovery disk as that seemed to be my only option. But the works of windows 8 way I will NEVER buy a computer with it again. Cannot start in safe mode and can't do the simplest task without being a great test. It's crazy. I thought that windows 8 was supposed to be simple and easy to use!

  Please reset your PC. The procedure is given in the link below:

  http://support.HP.com/us-en/document/c03546603

  If this does not help, recovery of the system to the factory settings. Consult the following document:

  http://support.HP.com/us-en/document/c03489643

• my computer does that in safe mode, it does not start in normal mode, my Security Center opens not or my updates of the widow.

  Hello

  my computer has stopped working on normal mode. I have to use my computer on safe mode.

  My Security Center lights.

  Windows dates won't turn on.

  I think having a consistency of disk.

  Can someone help me?

  Hello

  1. what exactly happens when you try to start in normal mode?

  2. do you receive any error messages?

  3. don't you make changes to the computer until the problem occurred?

   

  Method 1: Perform a system restore

  To get the procedure perform system restore, open the site mentioned below

  http://windows.microsoft.com/en-US/windows-vista/What-is-System-Restore.

  Method 2: Perform a clean boot in safe mode

  For the procedure to place the computer in a clean boot, open the site mentioned below

  http://support.microsoft.com/kb/929135.

  Note: To set the computer back to start normally, use the step 7 in the same link.

   

• my vista operating system continues to run in a loop, saying: Configuring updates 3/3 0 full. Cannot start in safe mode or the other amounts to the same configuration problem

  System downloaded 2 of 3 updates. the third will not update and continues in a loop. Failed to start in SafeMode either. Don't know what to do.

  Hello

  as you cannot start in safe mode, try this

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  or repost in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Cannot start Windows 'Normally' or in 'Safe Mode '.

  A lot of problems with USB drivers, I found an answer in the forums here, who directed me to the site to download the appropriate drivers for my chipset from Intel.  Download seemed to go OK; When asked "reboot now?" I selected Yes.  In about 30 seconds, I had a window (similar to the command prompt) asking if I wanted to start the computer in the last good known?  He also had options to start in Safe Mode, Safe Mode with networking, and Safe Mode with command prompt.  I first tried to start normally, but without success.  I then tried the other option (several times), none were successful.  I turned off the computer using the power button and then it starts again, but nothing helped.  The four options have failed once again.  The main thing is I'm unable to get the computer started in any Mode, so that I might be able to fix the problem.  I'm afraid I might have to reinstall Windows, once again.  The computer is running Windows XP Home Edition, SP 3.  I use my wife's cell phone to access the forums.  Any help will be greatly appreciated.

  WOLLAM

  Well, if you some drivers day and now have a problem in your Startup Options menu, you must first choose the option best suited for these kinds of my system does not start after an update types of problems:

  Last good known Configuration

  Last good known Configuration is the configuration XP saved the last time that Windows starts successfully and choosing that option can allow you to start long enough to undo (roll back) what that either got your first distressed system.

  If the system starts with the last known good Configuration, uninstall (restore) the update of the afflicted driver and get the right drivers for your system.

  If you still can't boot from your Startup Options menu, choose the option:

  Disable the automatic restart in the event of system failure

  Then you can see a Blue Screen of Death with information that will help solve your problem.

  Here's a BSOD example showing information you provide:

  http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg

  Please vote my posts as helpful so I can get a lot of points. I'm saving for a pony! Everybody don't like Raymond.

• Cannot start computer in mode normal mode only safe

  When I start my computer it only starts in safe mode. I can't boot into normal mode. What can I do to change this? I tried to start it normally, but it won't let me. Another thing is that I have a problem with is the resolution. I have a 19 "monitor and it will not stay on 1280 x 1024. I don't know what the resolution would be better, but is the 1600 x 900, I think that before the problems started.

  When I start my computer it only starts in safe mode. I can't boot into normal mode. What can I do to change this? I tried to start it normally, but it won't let me. Another thing is that I have a problem with is the resolution. I have a 19 "monitor and it will not stay on 1280 x 1024. I don't know what the resolution would be better, but is the 1600 x 900, I think that before the problems started.

  RE: starts only in Mode safe

  Find out if a check mark is set to boot in Safe Mode.
  Start button > in the search box, type msconfig > press the Enter key > uac prompt > click on Startup > make sure that no checkmark found nowhere > click OK when finished.
  See screenshot:

  

  RE: resolution
  If you go to the view window, can not move you the cursor down to the left until you see 1280 x 1024?

  Right-click in an open office space > personalize > display settings... For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Vista could not start in normal mode and the relocation of scores of hidden factory settings also failed.

  NOTE: THE PROBLEM WAS MY POWER SUPPLY WAS LOW, NEW POWER ADAPT SOLVED MY PROBLEM.   Read more if you are interested in what happened prior to my tent a different power adapter.

  Original title: vista 32 does not start

  After a reboot could enter the mode safe mode with internet connection.  able to restore good boot known beforehand.  But what normal start attempt would not start completely.  tried to reinstall from hidden factory partition.  07:34 minutes, the installation progessed.  then the machine stop.  When you restart get the message "error during installation, restart the computer, and then restart the installation."  When you try to start in safe mode, get error ' cannot install frrom SafeMode ".". "  I have no bootable cd.  to know about a 'platform of recovery' still tells CD also cannot install from this cd.   can I boot from a "devils of recovery" in safe mode and use the hidden partition to reinstall to factory settings as I tried the first time?  or do I need a full installation CD to get the machine to boot?   My question is should I at this stage of start-up during installation seems to have failed?

  as for what caused this problem?  I recently gave a USB external hard drive, but had not written for her.  did a chkdsk of the external hard disk without error.   When the problem was first happening, I removed the battery and the power cord of the acer laptop then pressed the power for 30 seconds to perform all memory the power button.  He got rid of a problem that I had been meet in which received start-up error message not "adapter acer". with battery removed, laptop power problems have disappeared.

  as the system is now, when I try to start everything now alt F10, I get a screen that reads "change windows startup options for: microsoft windows vista ' ' path: \windows\system32\winload.exe" "partition: 2" "HDD;". " d404533e' "[/ noexecute = optin /deteecthal]"

  When I press ESC the next screen "windows boot manager" bed "choose an operating system to stat, or press TAB to select a tool:

  Microsoft windows Vista (single choice)

  "to specify an option fo this choice, press F8."

  "Tools:

  "windows memory diagnostic"

  (diagnosis of memory showed no problem) by pressing TAB toggles between Vista and the diagnosis.

  I tried to boot with external USB hard drive connected and not connected.   the touch pointer was not working, but was erratic.   Sometimes, I could use a USB wireless mouse when it is started in safe mode.   recently the media player would not charge unless I restarted.  (before the system does not at all which is the theme of this original problem).

  When I try to start using f10, I get a screen that seems to ask for entry. the cursor is held after the detecthal of the line as below. What could of entry to enter the boot to continue?

  Winload.exe

  / noexecute = optin /detecthal

  me. surprised... the problem was that my power supply was low.   the adapter provided enough power for the laptop, most of the time.  but sometimes for laptop needs more power that the adapter could supply... so the laptop would be closed.   When I tried a different power adapter in a store, the fully charged laptop and my problem was solved.  lost a lot of time because I didn't know that the power supply was the problem!

• Vista will not start in Normal mode or safe.

  When starting, my login is stuck after that I entered my password. The spinning loading circle just keeps going. I tried to start in safe mode and I tried to do the repair but it still does not. Ive heard that incoming by the command prompt works but how? Any help at all is necessary and greatly appreciated. Thank you!

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• After Malware that my login is disabled cannot start in safe mode

  Hi if anyone can help.

  A friend tried to watch movies online, I'm not sure of the site they visited, but were asked to install MacKeeper and I believe that they did, as I noticed it was to download and installed the following day and I asked them why they did this and they said it was the only way to watch movies!

  Anyway to cut a long story short my friend then called me to say they received a "pop" window to say that my computer has a virus and call a number of 1800... I told them to do nothing certainly not call the number and I would like to sort.

  So basically since then that then I can not connect to my main account at the start, the section where you type your password won't let me type into it and there is a symbol of the brand of 'question' next to it. If I hold my mouse over the question mark I get a dialog box stating "Please enter your password to iCloud as... as well as the date. I can only login as a guest and I cannot connect in 'safe' mode by holding down the SHIFT key.

  I deleted the MacKeeper Application (and also another OS player application that is newly installed the same day!) and empty the memory cache of my browsers and also now upgraded to 10.11.6

  I also run disk utilities, but still I'm getting this problem trying to connect to my main user account!

  I think that it is some kind of malware, does anyone have ideas how to solve at least the connection problem?

  If I could stamp out to see if there is any malware stuff going on behind the scenes it would be too great!

  All suggestions welcome.

  Thanks, Ciaran

  

  How did you uninstall the MacKeeper application? Please be as specific as possible, unless you have followed the steps, I suspect that your system has installed to uninstall. If this is the case then you will need to re-install and uninstall immediately by following the instructions of developers. Otherwise, the best thing to do is to do a wipe and installing OS X and then manually install your applications and restore your data from your Time Machine backup.

  I'm sure you probably learned to not let this 'friend' enter the 100' of your computer.

• Firefox 4.0.1 shows almost all of the text in bold. I start to record mode and sound fine, but when I disable all the addon then start in normal mode it broke again.

  So I updated last night, this morning I noticed that a lot of the text on Web sites are in bold.
  For example when doing web yahoo mail unread messages must be "BOLD", while read messages shouldn't be now, they are all "BOLD" anything.
  I started in safe mode, thinking that an addon was broken and at the normal search that seemed to confirm that.
  So I disabled all the addon and manually restarted in normal mode, the problem was back.

  I confirmed all was the addon still handicapped and restarted in safe mode once again, fixed... so I disabled both the plugin and extensions... still broken in normal mode.
  At one point I thought it might be the default aspect so I downloaded one that looks like 3.6 and this one broke... again.

  So that's what I'm wondering, what is not loaded in safe mode which is always loaded when you manually turn off all extensions and plugin?

  This could be a problem with the new features related to the police who are trying to use your graphics card. You can enable those here:

  Tools > Options > advanced > [disable] "use hardware acceleration when available.

  (It's one of the things that turn off safe mode.)

  I don't know if you'll see results immediately, or if you must restart Firefox.

• Windows XP does not start in normal mode or safe. Download page_fault_in_nonpaged_area error message. Any help or suggetions? Thank you.

  It seems that the boot sequence is just circling himself. No matter if I try to start XP normally or in Safe Mode I go back to the screen that ask you how I want Windows XP to open. Any help would be appreciated.

  Hello Michael,

  Often, we see crashes as a result of a program from loading at startup. To solve these, we use the clean boot troubleshooting. The following describes this process: http://support.microsoft.com/kb/310353 http://support.microsoft.com/kb/316434

  Best regards

  Matthew_Ha