Driver M1136 MFP does not not in Windows8.1 64-bit

Similar Questions

• Drive DVD W520 does not not with Windows 10

  After the upgrade to Windows 10, the DVD drive no longer reads disks on the W520. It still works under Linux, so it's probably a driver issue. I checked the drivers on the Lenovo site and there is no DVD driver. The power player and opens but nothing is read off the drive. It does not appear in 'my computer '. Device Manager shows the drive with a caution triangle icon. Attempt to automatically update the pilot says that is already the newest one installed. Solutions Center Lenovo says that the driver is disabled. Deactivation and reactivation of the reader do nothing. How can I solve this problem?

  Looking for more in the Device Manager, I found that there is a registry error (code 19). Follow this guide and it fixed it.

  https://support.Microsoft.com/en-us/KB/929461

• I installed my USB drive but it does not recognize my imac. Only allows me to insert a disc.

  I installed my USB drive but it does not recognize my imac. Only allows me to insert a disc. I'm on OS 10.6.8

  The requirements for the SuperDrive Apple USB are:

  The system configuration required

  Compatible with the following computers:

  MacBook Pro with the Retina display

• Vista, how can I know when service pack 1 is fully downloaded, I have service pack 2 on the drive, but it does not load until service pack 1 is fully downloaded.

  Vista, how can I know when service pack 1 is fully downloaded, I have service pack 2 on the drive, but it does not load until service pack 1 is fully downloaded.

  I manual installation, it currently seems to be so many downloads, I might switch to automatic installation but I don't want to start the download service Pack2 because it could take forever and I have it on disk.
  Please notify
  Graham

  Hi Graham,

  Thanks for the reply and happy to know that the problem has been resolved.

  If you have problems with Windows in the future, please do not hesitate to post in the Microsoft Community Forums and we will be happy to help you.

• After you insert the disc in the drive, the system does not recognize f

  * Original title: Windows Media Player Windows 7 problem

  After having inserted the disc in the drive, the system does not recognize f indicating that a disk has been inserted.  Rattling coming from player. HP Pavilion Notebook g series

  (Moved to music, photos and video)

  Hello

  Welcome to the Microsoft community.

  According to the request, I understand that your system is unable to recognize the F: drive after inserting a disc. I appreciate your efforts to solve this problem.

  The issue could be due to one of the following reasons - the drive might be bad, might have a cable loose or slight corrosion on the contacts (usually for a laptop) and other issues.

  Given the clicking of the drive I suggest you to clean the optics on the drive by wiping with a barely damp q-tip.

  If there is a possibility of cables in bulk. I suggest to remove the power supply, then make sure that the cables at both ends. Remove and replace firmly. For laptops, you can often clean power and contacts data with a pencil eraser.

  1. Open the Control Panel.
  2. Click on Device Manager and select CD/DVD.
  3. Double click on the drivers tab.
  4. Click update drivers and right click on the Uninstalldisk.
  5. Reboot- it will refresh the default driver stack.

  See the following Article in the Microsoft helps solve problems with CD or DVD drives.

  https://support.Microsoft.com/en-us/mats/cd_dvd_drive_problems

  See the Microsoft support Article for CD or DVD drive not recognized by Windows or other programs.

  https://support.Microsoft.com/en-us/KB/314060

  Try these steps and let us know the results for assistance.

  Thank you

• Had to reinstall my CS3 because of faulty hard drive. It does not accept my serial number as it says it is already used the maximum number of activations and says I should turn off. I can't as the hard disk failed! Please help.

  Had to reinstall my CS3 because of faulty hard drive. It does not accept my serial number as it says it is already used the maximum number of activations and says I should turn off. I can't as the hard disk failed! Please help.

  Have already tried to contact Adobe and they told me to reinstall the program. I did this and the same issue. It's crazy. I can not turn off something that I did not more...

  Thank you.

  No - I had, of course, tried all these things. Finally, I had someone (after several days) on the personal chat group that could fix and it did it in a few minutes. Too bad that nobody else seemed to be able to do. Adobe is very soft.

  I can't thank enough the other person - it was amazing.

• Added raw lun mapped as a new hard drive, but VM does not see it.

  ESX 4.0 with two Windows Server 2008 virtual computer running.

  Created with SAN volumes and put at the disposal of the ESX host.

  I went in with my client vSphere virtual machine settings and added a new hard drive > mapped raw lun, stored with VM, physical and everything seems to set up correctly after hitting good. I also increased the size of the other two disks on this virtual machine. I rebooted the VM and connected to the server to find that he does not see the new drive, or he does not see the new size increases for other readers. I rebooted the host and yet, nothing new.

  What have I done wrong? Why these changes are not recognized by the virtual machine?

  After the increase in the size of disk or adding new disks, you must go the the VM Windows disk management and resize or format/partition/boot disks.

  André

• Zoo Tycoon 2 does not work on Vista 64 bit Ultimate

  When I start the game it gives an error saying that I have 0 MB of RAM installed.
  I also have a stub GPF.

  I tried to turn on DEP for all programs and added ZT.exe in exceptional cases.
  I edit "MSCONFIG" to show only 2 GB of ram.

  The issue of ram 0 MB goes, but I still I get a stub of protection error when I start the game.

  The thing is my old Zoo Tycoon 1 full collection works very well.
  ZT1 was released around 2001-2002. Whereas ZT2 came out around 2006.
  How can and more old-fashioned work fine but not the new version. I expect it to be the other way around.

  Someone at the helpdesk said MS the ZT2 game does not work on Vista 64 bit and I should install a virtual machine so that it can work in 32-bit.
  Is really the only way? Help, please.

  Hi orbit17,
   
  Thanks for posting on Microsoft Answers.
   
  Try to turn on DEP for "Windows programs and services only" and then restart the computer and check with the game.

  Here is a link to a KB which deals with the minimum requirements of the system and the compatibility problems with Zoo Tycoon 2: http://support.microsoft.com/default.aspx/kb/889368

  Please make sure that your computer meets the requirements for the game and that your computer is compatible

  Also how much RAM do you have installed on the computer?
  Did you add extra RAM since the purchase of the computer?

  You can also try to run the memory diagnostic tool by using the Windows Vista DVD.

  I hope this helps.
  Kind regards

  Niranjan | Microsoft Answers Support Engineer

• Lightroom trial does not say (0xc000007b) is 64-bit free btw. What should I do?

  Lightroom trial does not say (0xc000007b) is 64-bit free btw. What should I do?

  Hi Darcy,

  Please follow the steps mentioned in the article.

  https://helpx.Adobe.com/Lightroom/KB/error-Unable-start-correctly-0xc00007b.html

  Please post on the Adobe Forums.

• VMware does not start - guest xp 32 bit SP3

  Running vmware guest 32-bit xp SP3 will not start not host is mac os x 10.6.4

  See zip files in next post according to Woody comments

  You still have not edited your original post and removed the copy and pasted the contents of the log file...

  Well I can start a Virtual Machine Window XP with your configuration so .vmx file at least, good sound, however, you will need to provide adequate information to help diagnose your problem and while the vmware.log file may be useful is not always tell the whole story, so take a look at HOWTO: ask (and answer) Questions as a guideline , then provide additional details and then just "vmware does not start - guest xp 32 bit SP3.

  Remember to change the message original and deleted the copy and paste the contents of the log file.

  (Just in case...) On the right side upwards under Actions click on Edit thread.)

• Satellte C870 (PSC8EE) - display driver for Win8 does not install anything

  Hello

  I have a Satellite C870 bought in October last year.
  I have level of Windows 7 to Windows 8 a first time just before Christmas and has worked well.
  (A few small issues suchas as necessary before installing the display driver, but all Bios Update worked fine)

  A few days ago I had a system crash and the HARD drive died.
  Send the Sateite to replace HARD drive and came with Windows 7

  Has started the last installation of evening back to 8 64 window.
  But the display of the Toshiba site driver does not install anything? Catalyst still not...
  Just get the request to confirm if I want to install the product and then nothing...

  Tried the two drivers offered from the 19/02 and 26/02, but with the same result...
  Tried to install the driver directly from AMD announcement was a message my card was not supported
  I tried Windows 7 driver from Toshiba site for my machine and got the same message...

  Graphics card is an AMD 75610 M

  And of course I have admin access and also tried to run the installation in administrator mode files.
  And other drivers install normally (Lan Drivers, drivers Wifi, Tempro, mode eco etc.)

  Thanks for your help

  Hello

  The driver that you downloaded is a zip package.
  Unzip everything first.
  Then you will see a single .exe file in the unzipped folder.
  This exe file is also a package.
  Therefore, unzip the .exe file too.
  Right click on the exe file and select unpack here
  Now, you will have access to the files together. Now choose Setup.exe or Install.exe

• Tecra A7-202: Touchpad driver virtual scrolling does not work

  Hello, I have problem with Synaptics touch pad driver version 9.1.0 (laptop Tecra A7-202).

  When I run any program as administrator, virtual scrolling does not work.
  When I run the program as a normal user, everything is OK.

  Hello

  What's your Tecra preinstalled with designed Toshiba recovery image?

• Tecra A9: HARD drive write Cache does not work

  Hello!

  When I try to activate your hard drive write cache, it does not work:
  I can check the box and press OK, but when I go back to the dialog box the box is unchecked.
  The event log shows a warning: "the driver disabled the write on the device \Device\Harddisk0\DR0 cache.

  This slows down my laptop. I don't want to work without the write cache.
  What can I do?

  Greetings,
  Christian

  Hello

  did restart you your machine after checking the box? Usually, you must first reboot the system when certain changes.
  On the other side, you know this microsoft article? You should read:

  http://support.Microsoft.com/kb/332023

  This could probably explain why windows leaves the box unchecked...

  Welcome them

• HP Pavilion Slimline S5: Internal HARD drive failure, PC does not start

  Drive HARD internal of my HP Pavilion Slimline S5 failed and died recently (bought in 2011). My HP warranty is long gone.

  The splash screen has shown this message:

  1720-SMART hard detects an imminent failure

  Due to lack of player: SATA0

  Failed attributes: # 05

  I have several questions about this:

  1. Is it only caused by HARD drive failure? I want to replace it myself, but I don't really know if there are other parts to replace. Or it will be better to bring it to the computer shop to do carefully check?
  2. I can replace it with Seagate Barracuda 3.5 "(7200 RPM, 1 TB, SATA 3 or 6)? I think that the current HARD drive is Hitachi.
  3. I still need to transfer Windows OEM once the HARD drive is replaced?

  Thanks in advance.

  According to the packing of the Seagate, it might come with the software.  But if it is OEM drive then found the software by clicking HERE.  In general, I use a USB adapter for hard drive to clone if the PC will not support an additional drive.  Given that a number of incomplete model for the PC, it is difficult to find accurate info, but the Pavilion Slimline S5 I checked all have a motherboard with additional SATA ports.  Just have a spare SATA cable and power on the power port and try the cloning software.  Make sure that the drive is not touch a conductive element.  Usually, I place the additional reader on a cardboard box.

  Install the new drive as a replacement for the existing drive and connect everything as it is now.  Then connect the old drive in the manner discussed.  Boot from the CD created with cloning tools.  If the old drive is cloned stll, then when the software is finished, remove the old drive connections to see if the drive can start the computer.  If this is not successful, try to run the recovery screen (F11) BIOS boot manager.  If that does not work, use the Recovery DVD set brand when the computer was new.  If you did this, or lost them, then see THATto order a series.

• Pavillion 2132tx g6: Ralink wifi driver installed but does not work in my hp Pavilion g6

  My wi fi connection worked properly. But when I reinstall the ralink wifi driver, then the driver is installed but does not appear any wireless device. In Device Manager, it says sign exclaimation. How can I solve this problem?

  Hi Raj1813,

  Uninstall the driver that you installed, download & install 1 of these drivers in place: Intel Wireless drivers for Microsoft Windows 7, Ralink 802.11 b/g/n WiFi Adapter

  AFTER THE INSTALLATION OF ANY KIND OF DRIVERS, RESTART YOUR COMPUTER FOR DRIVERS TO WORK ON YOUR COMPUTER.

  Yours faithfully,

  Ryan