Similar Questions

• Printer error ' ' the installed print head is not intended for this printer or is damaged.

  Original title: printer does not print

  I have a hp photosmart B110a all-in-one printer and the following warning came on the screen. "the installed print head is not intended for this printer or is damaged" useless to Sam the printer now does not work. can someone advise on how to remedy the situation. Thank you

  I have a hp photosmart B110a all-in-one printer and the following warning came on the screen. "the installed print head is not intended for this printer or is damaged" useless to Sam the printer now does not work. can someone advise on how to remedy the situation. Thank you

  Hello

  You will need to contact the HP Support for this hardware problem.

  HP drivers & support | United States:
  http://WWW8.HP.com/us/en/support-drivers.html

  You can also check on the Forums of HP Support for other users who may have solved that problem.

  HP - HP Support Forum Support Forum:
  http://h30434.www3.HP.com/PSG/

  Concerning

• When you try to import photos, I get an error that says that the preview is not available for this file.

  When you try to import photos I get an error that says: Preview is not available for this file. Then when I try to download these files, a gray box returns for each photo with the name of the file, and this error message -Preview is not available for this file but no picture. The files are JPEG files. I use Lightroom CC help?

  Some additional information. I received these photos of my granddaughter of my son with Dropbox. I checked the files under properties and found that they were listed as "some blocked properties" so I checked the box to 'unlock' and click on apply. The blocked message went away. Then, I took the original photos out of the folder of file they were in. I went back to LR and made sure those grey boxes with the Preview is not available for this file was missing. Then I went to the new files with the status of unlock in a new folder and tried to import into LR... same thing happens again! UGH

  Hi rsobieski,

  Could you please copy the images of Dropbox in a new folder on the computer/pictures folder.

  Also, then try again to import images into Lightroom and also please check if you have read and write permissions on the images.

  Kind regards

  Tanuj

• HP 2300 error "cartridge not intended for this printer.

  Hello

  I recently completed a 94 black ink cartridge and when I installed it, a message appeared: "black cartridge inserted now is not intended for use in this printer."  First and only time I had a reflilled of the cartridge.  How to operate?

  Sounds like a user related error message. Unfortunately, some machines can detect if the cartridge has been tampered with or reused. For various reasons, reload a cartridge is not recommended because it may harm your machine. This error message indicates that the power connection is damaged, and probably the error will remain until a new cartridge is bought to replace the old.

  I assure you that although the reloaded cartridges work much of the time, they have a failure rate much higer and the factors that can affect the mechanics of the machine at all times.

  I would like to know if this is the information that you need!

  -Spencer

  PS have a great weeekend!

• cartridge in the slot on the left is not intended to be used with this printer. Remove and replace

  Hello

  After using my printer on a regular basis and without any problem, I suddenly had this coming message: "cartridge in the slot on the left is not intended for use in this printer. Remove and replace.

  I have a computer that is running Windows 7, 64-bit and the cartridges that I use are all genuine HP cartridges, black and tricolor cartridges are XL.

  What surprises me the most, is that the left cartridge is not empty, I without touching it, there was no jam paper, or any other poor behaviour of the printer. It happened just in the middle of printing, the printer just finished a job, and was about to start the second in the queue. Maybe this detail can help or it's just a coincidence...

  Thank you for your help

  Tonphilou

  Hello

  Please follow the steps in the document below.

  http://support.HP.com/us-en/document/c00042821

• I get an error message saying that the mail was not sent when sending a PDF file in Outlook Express.

  Outlook Express 6

  Hello
  Recently, if I send a big PDF file via outlook, after attempting to send the files, I get an error message saying that the mail has not been sent. The files remain in the Outbox, but when I check with the recipient, they confirm that they have received the mail! This has only recently begun to happen. Any suggestions? Thank you

  Check: File | Work offline and in: reviews | Layout: uncheck the preview pane. Open the Outbox and delete the message.
   
  If that does not create a new box of sent, and sent items.
   
   
  Follow these steps for the Outbox and sent items after you move the messages you want to save to a local folder that you create.
   
  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.
   
  In Windows XP, the files of user OE (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.
   
  With OE closed, find the Outbox.dbx and Sent Items.dbx file and remove them. New files will be created automatically when you open OE.
   

• When I select Help and support icon, I get an error message indicating that the feature could not start.

  help and support does not work

  When I select Help and support icon, I get an error message indicating that the feature could not start.

  I use a Vista 32 bits on a HP computer operating system model number m8300f.

  In addition, I bought a copy of Win 7, but who could not load freezing during installation.

  Hello

  Try to run the command in the elevated command prompt, follow the steps below, it could help us solve the problem.

  1. open the start menu, click programs principally made, select accessories.
  2. right click on command prompt, and then click "run as administrator ".
  3. type the following commands in the DOS prompt window and press ENTER at the end
  of each line:

  REGSVR32 MSXML3. DLL/U
  REGSVR32 MSXML3. DLL
  REGSVR32 MSXML6. DLL/U
  REGSVR32 MSXML6. DLL

  (At the elevated command prompt command should not give us any error).

  Restart the computer and try to access help and Support.

  For the problem of installation of windows 7.

  We would like to get more information about you to help solve your problem. You better, please answer the following questions.

  1. How did you start the installation process?

  2. you perform a new installation or an upgrade?

  3. what type of drive you are using for installation?

  4. at what stage of the installation has it stopped?

  5. have you received an error message?

  First of all, I would say that you disconnect external devices connected to the computer except the keyboard and mouse.

  If you have performed an upgrade suggests to restart the computer and you will be prompted for a roll back option.

  Once you're on the office suggests to run Upgrade Advisor and check what needs to be done before you start the upgrade.

  Before you begin the upgrade process to ensure that your computer meets the condition of equipment to install Windows 7 and check on the website of manufacturer computer if the computer is good to run windows 7 or not.

  Installing and reinstalling Windows

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows

• To run all the applications of the laptop or install download applications works does not error message indicating that the application is not valid "win32.exe or win32.application.

  To run all the applications of the laptop or install download applications works does not error message indicating that the application is not valid "win32.exe or win32.application.

  Hello m.velentino,

  Not sure if you are still having the error message isn't valid win32.applicaiton.

  Get the error: not a valid 32-bit application can have several origins:
  I have listed some of them below.

  The file is corrupted, bad or missing.
  -If the hard disk is damaged or hurt it cause work programs to fail, either because not all data can be read from the hard drive the program is damaged on the drive. Run scandisk and defrag on the hard disk to check for potential errors.
  -If you run the program from a shortcut on the computer, verify that the program is still on the computer. In some cases if the program is no longer installed on the computer, you can get this error.

  File is not designed for your version of Windows:
  -If you try to run a program that is not designed for your version of Windows, you can get this error.
  -Although many old programs designed to work in older versions of Windows will work with new versions of Windows, unfortunately, not all programs will not work.
  -If the program is an MS-DOS program more former start program or Windows, you can get this error.
  -If the program is designed for a 64-bit version of Windows and you are running in a 32-bit version of Windows, it will not work and generate this error.

  File is a virus, worm or other malicious program file.
  - This error can be generated by a file that is a virus, worm, Trojan horse or other type of malware file. Often, this will result because the antivirus installed on the computer will not allow the file to install or run. Try to analyze the file to check, it is not a virus or infected.
  -If the file has been checked and is clean, it is always possible that the virus protection program or a another program installed on the computer is at the origin of questions during installation or execution of the program. Start the computer in Mode safe and try to run the program. start the computer in Mode safe will be that nothing is running in the background that could cause this problem.
  
  Hardware incompatibility.
  -If you get this error during the installation of a program, it is also possible that the CD-ROM drive or the drive that you are installing the program from is not compatible with Windows or has drivers that are not compatible with Windows.
  -Download the latest drivers for your CD player or other of the manufacturer of the computer or the manufacturer of the equipment. (Microsoft does not pilot for other materials)

  Let us know if these suggestions help you.

  Marilyn

• I use a mac and would like to buy the package of Lightroom.  I had the trial and it was fine.  I was enrolled in the Belize and I get an error message saying that the country is not supported.  In the United Kingdom, I changed my region and I still get th

  I use a mac and would like to buy the package of Lightroom.  I had the trial and it was fine.  I was enrolled in the Belize and I get an error message saying that the country is not supported.  In the United Kingdom, I changed my region and I still get the same error message?

  Hello

  Try to subscribe through pricing and membership creative cloud plans | Adobe Creative Cloud

  Hope that helps!

  Kind regards

  Sheena

• Driver is not intended for this platform (install the latest driver for Verizon Wireless WAN (UNDP))

  Hello

  My Verizon Wireless WAN has worked on my T500 (2081CT 0, 4 GB of RAM, Windows Vista Business 64) since I received it last September. This morning it stopped working. Said that the card has not been activated. Ask Verizon and Lenovo have been pretty useless - each blamed the other, I so put on my own.

  -I uninstalled the driver for the Qualcomm HS USB card integrated, downloaded the latest version of the driver (transferred via CDROM since I can't connect to this laptop to the network where I work) and tried to install it. The HS-USB card is now displayed in the devices as "Unknown device" Manager (under 'other devices'), and his device status is:

  "The drivers for this device are not installed. (Code 28)

  Driver is not intended for this platform.

  To reinstall the drivers for this device, click on reinstall the driver. »

  Huh?

  Of course, reinstall driver does not work, the first problem is that he can't find online because I don't have internet connection without the card.  This driver has been installed from the following link:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-69999

  Seems to me that it should work on this machine. What I am doing wrong?

  -Some additional background: I've had several accidents recently, including at least two yesterday with blue screens. Easy to believe something has become corrupted, that's why I tried to uninstall and reinstall the driver.

  Help!

  Thank you very much.

  Solution was to uninstall the 'unknown device', search for new hardware and follow the promts by selecting all default values.

• Restore - error message says that the restoration was not

  I tried to restore to a previous restore point, but an error message says that the restore has failed. That's happened? or the cause? or how to treat it?

  Thanks in advance

  Yrbam

  This restore point is maybe damaged or defective.  A few others try and see if you have the same problem.  To do this, start safe mode and disable your software safety first - and then try to do from there.  If the problem persists, after back and we'll do some general troubleshooting to try to find and fix the cause.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• the old preview not available for this file?

  just bought a lumix, taken to view raw lx7.  no problem importing raw in my mac using lr4 files.

  When I try to import the same file in an acer aspire one notebook I get the following error message:

  the files are a camera which is not recognized by the raw format support in LR.

  in th lr import Panel, I get the following:

  Preview is not available for this file.

  Anyone know what is happening?

  I am able to import JPEG files.

  Support for the LX7 came with LR4.2. You have the version installed on your laptop?

• Error of invoices of purchases: subledger accounting options configuration is not complete for this book.

  I created a new book and made all the required settings for purchasing options and pay

  I created a purchase in Purchasing order and created an invoice in paybles

  but when I am trying to VALIDATE the invoice it is throwing the following error message

  "subledger accounting options installation is not complete for this book."

  I also created a subsidiary ledger and I also run the program "Update of the subledger accounting program" of responsibility for accounts payable

  Can someone suggest me a possible solution

  Thanks in advance

  When you set the ledger, it seems that you forgot to give the value for the field "method to account for the subledger.

  Specify 'Accumulation Standard' as the value for this field currently. You can change it later according to your needs.

  Kind regards

  Srini

• I get the error message "logon failure: the user has not been granted the type of logon required on this computer." on the workgroup computer.

  Original title: home network problems

  Here's what I have-

  1 PC connected via LAN - named PC - running Windows 7 pro 32 bit

  1 computer connected via WiFi - named TECRA running Windows 7 pro 64-bit

  1 computer connected via WiFi - named TOSH running Windows 7 Starter Edition

  Network LAN named changed to have the same name as the network WiFi (SSID)

  All computers have the same workgroup name

  Initially, I had a home group for them, created by TECRA but trying to solve the problem I deleted it.

  PROBLEM:

  PC and TOSH communicate perfectly both ways

  TOSH and TECRA so

  HOWEVER, the PC can access TECRA via the NETWORK, but sees TECRA PC and can not access

  Error message:

  \\Parents-PC is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if access you permissions. Logon failure: the user does not have the type of logon required on this computer.

  Attached the screenshot:

  Please Please HELP...

  Thank you

  

  Hello

  I suggest you to run the next fixit mentioned in the following link and check:

  How can I reset the default Hosts file?

  http://support.Microsoft.com/kb/972034/en-us

  Please answer us on the State of the question to help you further.

• Windows Mail error message: "some of the files could not be found and could not be attached to the message." You want to send the message anyway? »

  original title: end this message appears "some of the files could not be found and he could not be attached to the message." You want to send the message anyway? "I am running Windows Vista Home Basic Edition
  Hello
  I'm so frustrated, this problem has arisen at a very bad time!

  I started to use Windows Mail a few months ago and have had no problems so far, since Thursday night, every time that I attach a file to an e-mail message when I click on send this message 'some files was not found and could not be attached to the message. You want to send the message anyway? "I am running Windows Vista Home Basic Edition.

  Thank you

  Hello

  Method 1:
  You can perform the steps of troubleshooting from the link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

  Method 2:
  You can check if the default e-mail program is selected, follow the steps to do this:
  a. go to: Control Panel and go to default programs. Select Configure programs and Computer Defaults b. Select continues if the permissions window will appear
  c. left, double-click Custom, under Choose a default e-mail program, select Windows Mail.
  d. click Ok and close.

  Method 3:
  If none of the above steps are useful, then try to perform the system restore to the date when it was working fine.
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  NOTE: System Restore does not affect personal files, such as e-mail, documents, or photos, so it cannot help you restore a deleted file. If you have backups of your files, you can restore files from a backup.

  Method 4:
  If the file you are trying to download is opened, then it will not download, you can close the file completely and then try to download.