Driver RAID for Vmware ESXi 5.1 on Dell R420.
My project is to install Vmware ESXi 5.1 on a Dell R420 with Raid1 configuration. The question I have after configuring raid1 in raid utility is created using the, I launch the installation of Vmware ESXi 5.1. What is ESXi 5.1 sees not the raid1 partition but rather see two disks as are they worn can't in raid1 configurations.
I need to have this in raid1 config, can any who share an idea about my problem please or point me in the right direction.
I did some research but nothing seems to help resolve this issue.
Thank you
Sheriff.
Sorry for my previous response:
DELL-Daniel My - when I boot in the BIOS of the controller, I see the raid in a raid1 configuration.
Mgr dev you are right, I did research more when you all answered. I see the PERC S110 pilot was a software raid controller and thus the vmware esxi wouldn't work in a raid configuration 1 (software raid).
Thank you guys for you answer and who helped me
Tags: Dell Servers
Similar Questions
-
OpenManage for VMWare ESXi has no possibility of tasks of virtual disk
OMSA v 7.1 and 7.2 for Windows (and earlier versions) allow the user to perform many tasks on virtual disks, including reconfiguring - expand a RAID array with a new drive.
This is not true for managing open for VMWare ESXi - although you can monitor the status of the RAID and disks with the browser of the OMSA interface type, you cannot perform tasks - can not even make a high beam Flash.
It is a huge problem, because the PERC controllers (H700 and H800, for example) don't allow you to develop virtual using hard drives not Dell disks when you try this during startup in the bios. (These controllers only allows you to create new virtual disks using drives not Dell).
This test was conducted using the latest firmware (12.10.4 - 0001 A10) and drivers for the H700 and H800 and multi-server r610 ESXi 5.1.
Other people with VMWare have been affected by the present? The only solution is to have two player networks connected to the computer, and create a simple Windows with OMSA, boot in Windows Server to expand the table using OMSA for Windows.
I would be interested in the comments of others, including those of Dell. We spent hours on the phone with Dell; This seems to be the only solution. (Yes, Dell released a firmware version last year that has ceased blocking non Dell readers, but it only works for the creation of a new virtual disk, do not expanding one existing).
Yes. It came through a discussion in the Dell | Servers | Discussion of the RAID community.
en.Community.Dell.com/.../20263442.aspx
There is a CD bootable linux called OMSA Live that you download from PowerEdge (linux OS) systems management.
This OMSA PERC H700 and H800 control and allows you to do everything. When you reconfigure the RAID and the PERC card starts the reconstruction, although it seems risky, you can restart under VMware and the reconstruction of the RAID continues on. And you can analyze with OMSA for VMware.
-
Reference Dell Custom Image for Vmware ESXi 5.1
Hello
where can I find the custom image Dell for ESXi 5.1.
I can only find the ISO Images for 5.0 (4.1). But none for 5.1. Unfortunately the original ISO Vmware image will not work because it does not find a NETWORK card in my Dell R420. Which seems to occur as long as the original image from Vmware does not include the card driver NETWORK Dell to the R420.
I saw that today there is a download section at support.Dell.com for ESXi 5.1 with about 36 files to download. But no ISO Image for ESXi 5.1 as it is 5.0 and before.
Hope someone can help or knows how Dell will bring the custom image.
Thank you!
Here is the link to the ISO image of the ESXi 5.1 custom newly released Dell. Sorry for the delay to everyone - out www.dell.com/.../poweredge-r620
-
CONFIG for VMWARE ESXi 5.1 LABORATORY home
Hello
Is below configuration good enough to set up the VMware ESXi 5.1 laboratory at home?
CPU - Intel® Core™ i7-4770 processor (8 M Cache, up to 3.90 GHz)
Motherboard - Intel DQ87PG
SAS hard drive - SEAGATE BARRACUDor
SEAGATE BARRACUDA 7200.14 hard drive - 1 TB
Hard drive SSD - Samsung 840 Evo 120 GB
Memory (16 GB) - Kingston DDR3 1600 MHz 8 GB * 2
Monitor - SAMSUNG S19A003N
Cabinet - battle of Cooler Master HAF 912
OS - Windows 7 Professional 64 bit
I intend to return one of the below links to set up the LAB and I hope the above configuration is in favour.
http://boerlowie.WordPress.com/2011/11/30/building-the-ultimate-vSphere-lab-part-1-the-story/
or
http://popravak.WordPress.com/2013/07/26/VMware-vSphere-5-1-lab-on-our-laptops/
Thank you
You can find all downloads for VMwre to https://my.vmware.com/web/vmware/downloads. What you might want to look for are the links "Download trial" to "VMware Workstation" and "VMware vSphere. BTW. is there a reason you ask for older versions?
For Windows Server, see download Windows Server 2008 R2 Evaluation (180 days) from the official Microsoft Download Center
André
PS: In the past VMware has provided a free license of VMware Workstation after you have completed the requirements to become a VCP - DCV (i.e. necessary training, more exam). I'm sure they'll continue to do that.
-
Hyper-v 2008 R2 for Vmware ESXI 5.5 problem
Hello world
We are migrating to Vmware ESXI with HP 3PAR storage we have some important servers as vms on Microsoft Hyperv 2008 R2, I downloaded and installed the VMware vCenter Converter Standalone Client on the host Microsoft hyper-v connected to the localmachine as administrator and also to define the credentials of esxi distance everything works fine until it blocks 33% retried the process several times but without success , I collected the log, if I understand correctly this is something related to timeout or something maybe someone clears me on the issue, thanks a lot
also a question should I try to install the stand-alone converter on each virtual machine, hyper v or should I install on the computer host and make the conversion?
is it possible to make the conversion without turning off the virtual machines?
Thanks in advance
You do not need to install the converter on each machine, only the converter agent, which is installed automatically when it is not found on the destination computer.
HTH
-
VMWARE ESXI 5 on R720 Dell Server
Hello
We recently bought DELL R720 server and when we try to install vmware esxi 4.0 or esxi5.0 both it is not working.
can we have the experience to resolve the error and help me install the same...
Can you please inform us about the material used:
-What kind of local storage do you use?
-Do you have the installation will work perfectly or you run a mistake?
-By what means perform you the installation?
-
Need driver RAID for Windows XP for Equium A200-1AC
Where can I find driver for Windows XP raid?
Please check this thread:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=25846To my knowledge the A200 series does not support RAID. But the unit with two drives hard to need an additional driver called Intel Matrix Storage Manager.
-
CSR 1000v for Vmware Esxi, cannot ping / output
Hello
I just installed file eggs a 1000V CSR in my personal laboratory in an ESXi.
I followed this link:
http://www.fryguy.NET/2013/12/27/Cisco-csr1000v-for-Home-Labs/
I have a 1 Giga interface in the vlan by default with the VMXNET3 adapter type as suggested.
Whenever I turn on the CSR I have configure the interface and I unshut it. Negotiation is automatic (I tried to link hard but without success).
Problem is that since my pc I can not ping the CSR giga1 interface and vice versa. But on both sides, I see the arp of the interface.
I tried to change the type of adapter on vmware (VMXNET2 or E1000) but without any help...
If I turn on a debian or Windows VM on the same network card on the same vlan I can ping or reach it.
I tried to debug the ip packets, but nothing shows up some questions.
Config is a default one... there no ACL, not security features, nothing... just an ip address on the giga1 and the no command closed.
What is there?
Thanks in advance
Hello
Can say you that it was really the problem.
I have ESXi 5.5.0 3116895 and I installed CRS1000V 3.17 and it works perfectly
Good bye
-
Support for VMware ESXi 5 MPLS
I'm curious to know if the virtual switch can provide that some MPLS support so that can be unloaded from the VM? At present the virtual switch looks like a switch single layer2. Is it possible to get more features in Vsphere Enterprise?
He basis of VMware, but not rack mounting. It works just like a virtual machine on each ESXi host.
You need to ask cisco for the licensing costs.
-
How to compare premises, iSCSI and storage NFS for VMware ESXi 5 with IO Analyzer?
Hello
I have 2 hosts ESXi 5.0 with a few virtual machines running. I would compare the IO throughput for my local storage, iSCSI and NFS vmware storage store. Can someone point me to the right direction? I read the documents and tutorials, but I'm not sure how to compare tests from these 3 options.
I have a need to compare the following storage options.
Local disk on the ESX host
iSCSI on QNAP NAS device
iSCSI on EMC e 3100
NFS on QNAP NAS device
NFS on EMC e 3100
IOmeter seems to be good tool based on reading, but still not clear where to make changes to pass tests of storage to another.
Thanks in advance,
Sam
If you use IO monitor, then you must simply vmotion the VMS to the data store for the device you want to test, and then run the test (and Records results). Can vmotion for the following data store and repeat.
-
Error HP ESXi update offline Bundle for VMware ESXi 4.1
Whenever I try to update my server ESXi 4.1 with the bundle HP ESXi for ESXi4.1, I get the errors below. I stop the virtual machine and put the host in Maintenance Mode. I use this for a x 64 Bit of Windows 7 machine any help will be appreciated.
C:\Program Files (x 86) \VMware\VMware vSphere CLI\bin > vihostupdate.pl - MS Server
SX01. Bicorp.NET-i c:\metadata.zip b
Enter the user name: root
Enter the password:
Please wait install the fix is underway...
Unable to download the metadata. Error metadata.zip/tmp/updatecache /.
Metadata.zip: "he is there no element named"metadata.zip"in archive»
Are you sure you are using the right files?
You must use the update, as it is... not decompress.
André
-
VSM for VMware ESXi Server 6.0
Anyone know if is there an ETA for a VSM (Virtual Storage Manager) update that supports VMware 6.0?
Hello
The next MEM (v1.3) is released for if align with the release of VSM 4.5 EPA it is currently scheduled for the latter part of the 1st quarter of 2015 / early Q2 (Apr - Jun deadline).
As usual, these dates are subject to change.
Kind regards
Don
-
for vmware esxi fault tolerance specifications 5
Can someone tell me where I can find documents to show me the fault tolerance support in version 5? Are we still liminted to 1vcpu? How many virtual machines can be set to feet?
Hello.
Not much changed. I keep it updated constantly:
Good luck!
-
VMWare users have found a solution for the following?
Readers of PERC H700 and H800 (firmware current 12.10.4 - 0001 A10, r610 servers) allow the user (in the bios during startup) to create new virtual disks using non Dell drives, but you cannot expand a virtual disk existing readers not Dell, when in the bios. The option is grayed out.
OMSA for Windows bypasses it. Virtual disk | Tasks | Reconfigure can do online capacity expansion and accepts disks not Dell for this.
Problem is OMSA to VMWare ESXi (v7.2, the current version and older versions) doesn't have a virtual disk tasks fall to the bottom. You can not even a hard drive flashes. (VMWare ESXi = v5.1)
The only solution we can think of is to have two drive arrays connected to the computer, and create a simple Windows with OMSA, boot in Windows Server to expand the virtual disk using OMSA for Windows.
I would be interested in the comments of others, including those of Dell. We spent hours on the phone with Dell; This seems to be the only solution. (Yes, Dell released a firmware version last year that has ceased blocking non Dell readers, but it only works for the creation of a new virtual disk, do not expanding one existing).
The firmware update the unlocked non certified discs was in July 2010 (two years ago). No latest updates seem to speak of changes/updates to update that.
I don't know why uncertified discs would be blocked for a single operation (expansion/reconfigure) - are get you certain types of message that certainly is the case? Did you do that with certified readers? Last I heard, Dell had a firmware update in the works that would allow an extension to get the CTRL-R utility, where it historically could not be done from there. 12.10.4 as of 2012, I guess (if the Dell guy who told me he rode was OK) this update has not been released yet... However, I could be wrong. I don't have a H700 to test with, but you can try OMSA live as an alternative to the construction of a temporary Windows Server to try the expansion of the OMSA.
-
LSI MegaRAID Storage Manager on VMware ESXi 4.0
Hi guys,.
We tried to install on VMware ESXi 4.0 MegaRAID Storage Manager (IBM x 3550 M2) and it uses Controller RAID MegaRAID SAS 8808E to monitor the hard disk status but could not be able to install and it returned the error as attaché
We followed the procedure as shown in the following ibm Web site
1.6 MegaRAID Manager storage system to a VMWare ESX Server
Follow these steps to install the on a MegaRAID Storage Manager
VMWare ESX Server:
1. download the latest MSM to ibm.com
2 unzip the and copy MSM_linux_installer - 501.01.tar.gz on a USB key.
3. from the ESX Server, in the console root, type the following command
to identify the USB device: fdisk-l
4. type the following command: mount/mnt/dev / {name of the USB device}
5. type the following command: cd/mnt
6. type the following command to copy MSM_linux_installer - 501.01.tar.gz in the occupied Palestinian territories
file: cp MSM_linux_installer - 501.01.tar.gz / opt
7. type the following command to decompress the package gunzip MSM_linux_installer - 501.01.tar.gz
8 type the following command to unzip the package tar - vxf MSM_linux_installer - 501.01.tar
9. replace the directories with the path/opt/disk
10 tapez./vmware_install.sh to install MSM
11. Select version of VMware
a. enter 1 to install Vmware 3.5
b enter 2 for VMware 4.0 install
12. Select the storlib option
a. Enter n If you want to use the Inbox storlib driver
b. Enter y if you want to install the storlib delivered with MSM
IBM recommends 'y' is selected for use packed with MSM, storlib by selecting "n" can
cause some features of MSM does not function properly
I would like to know if I use the correct version of the Storage Manager Application MegaRAID for VMware ESXi 4.0
If not could someone please advise on how to proceed with the installation and troubleshooting
Please find the file of errors as attaché
Greatly appreciate your help
Thanks in advance,
Vignesh
Check if help: vSphere unknown health status ' vSphere ' eMware »»
Maybe you are looking for
-
Firefox is no longer closing of tabs in the output
I use Firefox 39.0. In previous versions my tabs automatically close their exit. This option is no longer available? I'm unable to findanything in the help files.
-
MacBook Air 13 "2011 Middle temperatures
base model 2011 with 1.7 Ghz i5. You wonder if it's a hot model by itself or only mine is. I have temperatures of 60 light web browsing mode and full 100 c while watching youtube at 1080@60 or shake, even in the middle. Parallels heat my macbook up t
-
Watch for problems on Yosemite 10.10.5 on MacBook Pro
I run my MacBook Pro (15-inch, mid 2010) with Yosemite 10.10.5. Since the loading of Yosemite, I have problems with the MacBook is running slowly. I think the problem is with the driver for my external monitor of LG W2240T. I can't type a 6 letter wo
-
1312 mfp: How can I make my mfp autonomous 1312 wireless connected to my home network
I have mfp color laserjet 1312, I want to make it autonomous in the corner to connect to my home network, so we don't have to plug it into the usb every time the family wants to print their tablets of laptop or phone. All solutions?
-
just reinstalled windows 7 as a dual boot with linux ubuntu 11.04, however, used windows recognizes my wlan card and does not allow me to scan for networks, absolutely no networks are displayed under networks. Help, please? original title: no wireles