Support for VMware ESXi 5 MPLS

Similar Questions

• OpenManage for VMWare ESXi has no possibility of tasks of virtual disk

  OMSA v 7.1 and 7.2 for Windows (and earlier versions) allow the user to perform many tasks on virtual disks, including reconfiguring - expand a RAID array with a new drive.

  This is not true for managing open for VMWare ESXi - although you can monitor the status of the RAID and disks with the browser of the OMSA interface type, you cannot perform tasks - can not even make a high beam Flash.

  It is a huge problem, because the PERC controllers (H700 and H800, for example) don't allow you to develop virtual using hard drives not Dell disks when you try this during startup in the bios.  (These controllers only allows you to create new virtual disks using drives not Dell).

  This test was conducted using the latest firmware (12.10.4 - 0001 A10) and drivers for the H700 and H800 and multi-server r610 ESXi 5.1.

  Other people with VMWare have been affected by the present?  The only solution is to have two player networks connected to the computer, and create a simple Windows with OMSA, boot in Windows Server to expand the table using OMSA for Windows.

  I would be interested in the comments of others, including those of Dell.  We spent hours on the phone with Dell; This seems to be the only solution.  (Yes, Dell released a firmware version last year that has ceased blocking non Dell readers, but it only works for the creation of a new virtual disk, do not expanding one existing).

  Yes.  It came through a discussion in the Dell | Servers | Discussion of the RAID community.

  en.Community.Dell.com/.../20263442.aspx

  There is a CD bootable linux called OMSA Live that you download from PowerEdge (linux OS) systems management.

  This OMSA PERC H700 and H800 control and allows you to do everything.  When you reconfigure the RAID and the PERC card starts the reconstruction, although it seems risky, you can restart under VMware and the reconstruction of the RAID continues on.  And you can analyze with OMSA for VMware.

• support for VMware workstation 7

  Hello

  I looked on the website and to the best of my understanding VmWare Workstation 7 EOL.

  http://www.VMware.com/files/PDF/support/product-lifecycle-matrix.PDF

  Hereby, I understand that there will be no more support for VmWare and forums are essentially the only resource that I can rely on.

  Can anyone confirm that this is correct?

  Thank you.

  This seems to be in line with the policy of support for this product:

  «VMware will offer 2 years in favour of the general availability of a new major version in the support and subscription.»

  Linjo

• Capture the statistical support for VMware Cluster

  Hello and thank you for taking the time to read my question.  In the near future I will have a cluster vmware small I need to generate reports of use of resources on.  I saw a tool called queryperf which seems to provide for all my needs and then some, but I'm not sure how get or use this tool.

  I normally just jump on an esx host and try the command to see if I have it but I'm traveling at the moment and do not have access to one.

  To wrap this up, I'm very keen to learn the following:

  How no one acquires queryperf?

  Where the tool lauched from?  (by this I mean: guest operating system, command-line esx host, ect)

  How to run on a cluster vm instead of a single server/client integer.

  Thank you for reading my post and I thank you for your help.

  I'm not aware of a tool called queryPerf, but there is a VI API method called queryPerf() that allows you to query the performance data of your vCenter/ESX (i) /VM (s) http://www.vmware.com/support/developer/vc-sdk/visdk25pubs/ReferenceGuide/vim.PerformanceManager.html#queryStats

  A great place to start to look for some samples or past issues/scripts/utilities that could be used to question the different associated performance stats is the VI API forums: http://communities.vmware.com/community/developer/managementapi?start=0

  There are also a few utilities preset that you can watch, onethat may be of interest is the viperformance.pl which is part of the VI Perl Toolkit Utilities http://www.vmware.com/support/developer/viperltoolkit/viperl15/doc/perl_toolkit_utilities_idx.html

  Also, here is a collection of news and recent documentation concerning the performance collection/analysis using VI SDK/API: http://communities.vmware.com/docs/DOC-9840

  Recently, VMware has started a new podcast for developers called the Coffee Talk where various topics concerning VI SDK/API/scripting/etc will be covered and the first two were related to the new vSphere SDK but she also had a lot of good practices on the collection of performance data that relate to the current VI 3.5 and coming vSphere 4.0 that you might find useful : http://communities.vmware.com/docs/DOC-9912

  You will be able to use the queryPerf() call in various set of programming languages (Perl, c#, .NET, PowerShell, etc) who can communicate with the VI SDK via the SOAP API. Depending on the platform and what type of data you want to collect, this should help you get started.

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  http://Twitter.com/lamw

  If you find this information useful, please give points to "correct" or "useful".

• Driver RAID for Vmware ESXi 5.1 on Dell R420.

  My project is to install Vmware ESXi 5.1 on a Dell R420 with Raid1 configuration. The question I have after configuring raid1 in raid utility is created using the, I launch the installation of Vmware ESXi 5.1. What is ESXi 5.1 sees not the raid1 partition but rather see two disks as are they worn can't in raid1 configurations.

  I need to have this in raid1 config, can any who share an idea about my problem please or point me in the right direction.

  I did some research but nothing seems to help resolve this issue.

  Thank you

  Sheriff.

  Sorry for my previous response:

  DELL-Daniel My - when I boot in the BIOS of the controller, I see the raid in a raid1 configuration.

  Mgr dev you are right, I did research more when you all answered. I see the PERC S110 pilot was a software raid controller and thus the vmware esxi wouldn't work in a raid configuration 1 (software raid).

  Thank you guys for you answer and who helped me

• CONFIG for VMWARE ESXi 5.1 LABORATORY home

  Hello

  Is below configuration good enough to set up the VMware ESXi 5.1 laboratory at home?

  
  

  CPU - Intel® Core™ i7-4770 processor (8 M Cache, up to 3.90 GHz)

  Motherboard - Intel DQ87PG

  SAS hard drive - SEAGATE BARRACUDor

  SEAGATE BARRACUDA 7200.14 hard drive - 1 TB

  Hard drive SSD - Samsung 840 Evo 120 GB

  Memory (16 GB) - Kingston DDR3 1600 MHz 8 GB * 2

  Monitor - SAMSUNG S19A003N

  Cabinet - battle of Cooler Master HAF 912

  OS - Windows 7 Professional 64 bit

  
  

  I intend to return one of the below links to set up the LAB and I hope the above configuration is in favour.

  
  

  http://boerlowie.WordPress.com/2011/11/30/building-the-ultimate-vSphere-lab-part-1-the-story/

  
  

  or

  http://popravak.WordPress.com/2013/07/26/VMware-vSphere-5-1-lab-on-our-laptops/

  
  

  
  

  Thank you

  
  

  You can find all downloads for VMwre to https://my.vmware.com/web/vmware/downloads. What you might want to look for are the links "Download trial" to "VMware Workstation" and "VMware vSphere. BTW. is there a reason you ask for older versions?

  For Windows Server, see download Windows Server 2008 R2 Evaluation (180 days) from the official Microsoft Download Center

  André

  PS: In the past VMware has provided a free license of VMware Workstation after you have completed the requirements to become a VCP - DCV (i.e. necessary training, more exam). I'm sure they'll continue to do that.

• Red Hat GFS is supported for VMware?

  I was not able to find a definitive answer about this, then take the community to see if I'm right:

  Red Hat and VMware does support Red Hat Linux computers virtual running GFS? We have a set a production level Wordpress blog servers running RHEL 5 64-bit using physical storage shared RDM (100 GB) and when these virtual machines are under heavy load the GFS volume freaks out and drop-outs. We need to power cycle the VMs (pull on the plug) and start them upward for GFS rerun.

  I was not able to find that our facility is even supported even though it works technically. Anyone know? No official word from Red Hat or VMware on it?

  Thank you.

  The only grouping support supported by VMware is MSCS.

• Hyper-v 2008 R2 for Vmware ESXI 5.5 problem

  Hello world

  We are migrating to Vmware ESXI with HP 3PAR storage we have some important servers as vms on Microsoft Hyperv 2008 R2, I downloaded and installed the VMware vCenter Converter Standalone Client on the host Microsoft hyper-v connected to the localmachine as administrator and also to define the credentials of esxi distance everything works fine until it blocks 33% retried the process several times but without success , I collected the log, if I understand correctly this is something related to timeout or something maybe someone clears me on the issue, thanks a lot

  also a question should I try to install the stand-alone converter on each virtual machine, hyper v or should I install on the computer host and make the conversion?

  is it possible to make the conversion without turning off the virtual machines?

  Thanks in advance

  You do not need to install the converter on each machine, only the converter agent, which is installed automatically when it is not found on the destination computer.

  HTH

• MOTHERBOARD INTEL DESKTOP SUPPORT FOR VMWARE

  Hai

  INTELDG45ID supports vmware technology... That is, can we install vsphere as vm in worksation

  Look at this link

  http://www.TigerDirect.ca/applications/SearchTools/item-details.asp?EdpNo=4283306 & SKU = MBM-G45ID-Q6700

  Thank you

  VAMSi

  _{INTELDG45ID supports the vmware technology}

  Yes, you can install vmware if is having motherboard G45

  • Intel DG45ID (G45 motherboard)

  • Intel DG35EC (G35 motherboard)

  • Intel DP35DP (P35 motherboard)

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points

• PowerVault MD3420 support for vSphere, Esxi 6.0 6.0?

  Hello

  We ordered 4 R730 servers "nine" with 12Gbps SAS and a SAN MD3420 cards. ESXi hosts are preinstalled with ESXi version 6.

  Once we have installed 40 VMs on that, we now see that after a reboot, the HBA does not detect the LUNS. Only after the adapter cables HBA and their reversal, it detects the. Also in the selection of the HBA path I see all the options like "round robin" etc.

  When I check the site of VMware, it looks all DELL powervault MD32xx/MD34xx without DOING to support ESXI 6.0, with the exception of the MD3420! I checked it before and are beginning to doubt myself / or if the compatibility on the Web site has changed.

  http://www.vmware.com/resources/compatibility/detail.php?deviceCategory=san&productid=36288&deviceCategory=san&details=1&partner=23&arrayTypes=4&isSVA=0&page=1&display_interval=10&sortColumn=Partner&sortOrder=Asc

  Is there a driver or updated to be less expected the first weeks, or should I start without downgrading all my VMs and esxi hosts to version 5.5? It's really a shortcoming that I think that the package came with preinstalled 6.0.

  Best regards

  Joris

  I found the solution by installing another driver in the list of lsi, and then disable the native driver.

  The appropriate driver is not in the image of DELL ESXi 6.0 A00.

  In short, all this on each host:

  [root@*:~] software esxcli vib install v - /vmfs/volumes/DS_SAN_DG2VD1/ISO/scsi-mpt3sas_10.00.00.00-1OEM.600.0.0.2494585.vib

  Result of the installation

  Message: The update completed successfully, but the system must be restarted for the changes to be effective.

  Restart required: true

  VIBs installed: Avago_bootbank_scsi - mpt3sas_10.00.00.00 - 1OEM.600.0.0.2494585

  VIBs deleted:

  VIBs ignored:

  set of module system esxcli [root@*:~]--enabled = false - module = lsi_msgpt3

• Reference Dell Custom Image for Vmware ESXi 5.1

  Hello

  where can I find the custom image Dell for ESXi 5.1.

  I can only find the ISO Images for 5.0 (4.1). But none for 5.1. Unfortunately the original ISO Vmware image will not work because it does not find a NETWORK card in my Dell R420. Which seems to occur as long as the original image from Vmware does not include the card driver NETWORK Dell to the R420.

  I saw that today there is a download section at support.Dell.com for ESXi 5.1 with about 36 files to download. But no ISO Image for ESXi 5.1 as it is 5.0 and before.

  Hope someone can help or knows how Dell will bring the custom image.

  Thank you!

  Here is the link to the ISO image of the ESXi 5.1 custom newly released Dell. Sorry for the delay to everyone - out www.dell.com/.../poweredge-r620

• VSM for VMware ESXi Server 6.0

  Anyone know if is there an ETA for a VSM (Virtual Storage Manager) update that supports VMware 6.0?

  Hello

  The next MEM (v1.3) is released for if align with the release of VSM 4.5 EPA it is currently scheduled for the latter part of the 1st quarter of 2015 / early Q2 (Apr - Jun deadline).

  As usual, these dates are subject to change.

  Kind regards

  Don

• CSR 1000v for Vmware Esxi, cannot ping / output

  Hello

  I just installed file eggs a 1000V CSR in my personal laboratory in an ESXi.

  I followed this link:

  http://www.fryguy.NET/2013/12/27/Cisco-csr1000v-for-Home-Labs/

  I have a 1 Giga interface in the vlan by default with the VMXNET3 adapter type as suggested.

  Whenever I turn on the CSR I have configure the interface and I unshut it. Negotiation is automatic (I tried to link hard but without success).

  Problem is that since my pc I can not ping the CSR giga1 interface and vice versa. But on both sides, I see the arp of the interface.

  I tried to change the type of adapter on vmware (VMXNET2 or E1000) but without any help...

  If I turn on a debian or Windows VM on the same network card on the same vlan I can ping or reach it.

  I tried to debug the ip packets, but nothing shows up some questions.

  Config is a default one... there no ACL, not security features, nothing... just an ip address on the giga1 and the no command closed.

  What is there?

  Thanks in advance

  Hello

  Can say you that it was really the problem.

  I have ESXi 5.5.0 3116895 and I installed CRS1000V 3.17 and it works perfectly

  Good bye

• Support for VMWare VT on HP Pavilion HPE h8xt

  I just bought a new HP Pavilion HPE h8xt and want to use VMware player to create a virtual using Windows 7 64-bit computer.  When I tried to do, VMware has informed me that I had to enable VT in the BIOS.  I restarted the machine and press F1 and F10 and have a 2.10.1206 interface of American Megatrends, who informed me that THE system BIOS has been CHG_705.ROM v7.05.  Anyway, I can't find any associated BIOS Setup option.

  The processor is an i7 2600, which is quite common.  This processor supports VT?  I just need to load a new BIOS?

  Thanks for any help!

  Hi Trailway,

  You should be able to boot into the bios and look for VT usually, it is disabled by default. You might find that it listed on the tab of the System Configuration.

  Run this program.    Test for 64-bit hardware  She say on the hardware virtualization?  Yes or no?

  Another test would be to download and use PC Wizard. Click processor under the hardware then scroll to virtualization. It should indicate Yes and if it is enabled or disabled.

  What is the number of exact product for your PC?

  I do not have the Intel i7 - 2600 k but my bios is different from the bios of your PC.

• Hardware support for VMware Fusion

  I want to create a virtual machine on Macbook Pro retina 15 "(MC975ZA) with 8 GB of RAM using 'VMware Fusion'." Please confirm to me that VMware Fusion is taken in charge for the MacBook Pro retina 15 "(MC975ZA) material."

  Yes, vmware fusion 5 works on mac book pro Retina of. The latest version supports the display function of retina as well.

  Please visit http://www.vmware.com/support/product-support/fusion/faq/requirements.html

  Download the demo version of fusion 5 and try it. If you have any questions, you can post in the community. If he is convinced to buy it.