Driver/Touchpad Scroller

Greetings,

Model: HP Pavallion DV4 1319TU.

No. VB644PA #ACJ.

Operating system: Windows 7 Home Premium 32 - Bit

I have format my laptop yesterday due to technical difficulties.

Now I have been formatted. Earlier, my touchpad scroller mouse was working properly.

But after formatting the laptop, my mouse touchpad scrolling is not working now.

also I am not able to determine if it should be installed any driver.

Please help me.

Thank you very much in advance for the help.

Concerning

You are the very welcome.

Sorry...

Your model uses the Alps touchpad driver.

http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-77000-1&cc=us&DLC=en&LC=en&OS=4062&product=3962757&sw_lang=

Tags: Notebooks

Similar Questions

  • The touchpad scrolling works on all applications (including IE) but not in Firefox - Win 10

    My touchpad scroll does not work in Firefox. It works great with IE and other applications (Windows 10).

    If it was a driver issue - I think that this would not work in all applications, but it works fine everywhere (except Firefox)

    I can operate for a short period, if I uninstall the Touchpad (in Device Manager), restart, re - installed.

    Again, hard to believe it would be a driver problem - works fine in all applications, except Firefox...

    He stares at me

    http://dellwindowsreinstallationguide.com/Dell-touchpad-drivers/

  • The touchpad scrolling does not work after upgrade to Windows 10

    Hello world

    I used everything on my laptop Satellite uninstalled and reinstalled Windows 10.

    Now, toshiba applications disappeared.
    This isn't my problem.

    My problem is that on my touchpad scrolling is not working.
    Synaptics is gone and when I try to install a new driver (Touch Pad driver) it gives an error after installation.

    Synaptics is installed accept for the uttilities mouch.

    Someone can help me.

    Greetings, Jiska

    I don't know what model of laptop you have, but it turns out that not all series of phones are supported to win 10 upgrade.
    In this case Win 10 drivers will not be released on such unit...

    The touchpad scrolling requires additional touchpad driver...
    If your device supports Synaptics touchpad, you can also use the driver for the Synaptics driver page:
    http://www.Synaptics.com/en/drivers.php

    But currently driver to Win 10 is not available... you can try to install and to use the Win 8.1 driver but I'm not sure if it will work properly...

  • Portege R100: Fn keys and Touchpad (Scroll) no longer works?

    Hello

    The Fn keys and touchpad scrolling don't work anymore. Everything was working fine yesterday and I did not install anything since then.

    When I try to open the "Accessibility" utility miladi, I get the following error: this system can not use "TOSHIBA INTERDISE".

    Any advice would be really appreciated.

    I hope that this can be corrected easily.

    Best regards
    Marc

    Hello

    I know that Toshiba accessibility!
    This tool is also pre-installed on my Satellite.
    I recommend reinstall the shortcut key utilities and the common modules.

    Did you mean that the touchpad doesn't work as it should be disabled?
    FN + F9 disable the touchpad. Maybe you have turned it off accidentally?

    If not, I would first check the touchpad configuration and if it doesn't help then I would try reinstalling the driver for the touchpad.

  • Satellite M35X-S163 - how to activate the touchpad scrolling feature?

    How to activate the functionality of scrolling on the touchpad of my laptop Satellite M35X-S163?

    Hello

    The touchpad scrolling feature can be enabled in Control Panel > mouse.

    You'll find the option but don t forget that the driver for the touchpad should be installed and you can find it on the Toshiba site:
    http://www.CSD.Toshiba.com

  • Satellite L45: touchpad scroll feature does not work

    OK, I have a laptop Satellite L45 and I need help.
    The functionality of scrolling on the touchpad worked for awhile and now it will not work.

    I've looked throughout the computer and tried everything and nothing seems to work.
    I don't really know too much about computers in a first time, and no one I know can help me.

    My father had the same problem with his computer, but he says it seems to work himself.
    Mine has not yet and it drives me crazy.

    If someone could help it would be greatly appreciated.
    Thank you very much.

    Hello

    Have you checked if the touchpad scroll function has been enabled and configured correctly?
    I recommend that you check these settings before you to reinstall the driver for the touchpad.

    Do you know where to find these parameters?
    You can find it in

    + Control Panel-> mouse-> last (device settings) tab-> settings button.

    Here, you should check the * virtual scrolling *.

    Good bye

  • The touchpad scrolling has stoped working on satellite

    The touchpad scrolling has stoped working.
    I restarted / reinstalled the driver / reformatted hardrive 3 times (this works but the feature soon stop) / sytem restore / disabled firewall /?

    Can anyone help please it is really annoying me for the first time I'm having a problem with this machine that really gets to me.

    And what satellite you have? Is - this new model of notebook with touchpad buttons?

  • Satellite P300D - 21K Touchpad scroll not working not not on Windows 7

    Hello

    I'm new to this forum so I don't know if this is the right place to post this.

    Anyway, recently I installed Windows 7 32 bit on my Toshiba laptop, everything went well and I installed all the drivers I needed in order to make the webcam and the function of the keys at work etc.

    But I have a problem, my touchpad scrolling is not working after installation, now I can't scroll up and down, left and right with my touchpad. I tried searching for all the drivers who can help solve this problem, but I havn't been able to find everything about the touchpad.

    Anyone would be able to help me with my problem? Would be greatly appreciated, thank you.

    Hi SA90,.

    Normally, you need to install the driver for the touchpad for use of the virtual scrolling function. I checked the site Web of Toshiba and I could find a touchpad driver for Windows Vista 32 bit. Normally the Vista drivers are also work on Windows 7.

    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

    Check this box!

  • The touchpad scroll not working no-Windows 8 updated

    HP Pavilion dv7 laptop computer that came with Windows 7, I've upgraded to Windows 8, but now the touchpad scrolling is not working.

    I tried;

    • update the driver
    • reinstalled the original driver
    • troubleshoot compatibility on the original
    • tried a battery remove / hold power button option

    They have not fixed my roll at all. No other actions are no longer works... The Synaptics driver devide score is installed right now.

    The only thing I can DO point-and - click on by touchpad.

    Appreciate the help.

    Hello

    It is possible that the setting you need have not enabled by default, so you better check the following.

    Open windows control panel, open the mouse, select the tab "Setting ClickPad", and then click the setting button ClickPad.  In the next window, enter a check mark in the "Scroll" checkbox, then click on the word 'Scrolling' and you will see a cog on the right.  Click the sprocket to open another page of settings and enter a check mark in the box against "Vertical scroll".  Click on the close button and then click on apply and Ok in the previous window.

    You may well find other 'gesture options' can also be activated in the same way.

    Kind regards

    DP - K

  • Touchpad scroll function: permanent setting.

    I have an ASUS notebook PC and when I open the 'control panel' and set the touchpad scroll function it will NOT STAY SET and I have to reset it each time I start the computer, then how I put it permanently? I am a novice on computers; your help will be appreciated.

    CharlesRSR.

    Hello

    What is the model number of the computer?

    I suggest you to uninstall and reinstall the drivers for the touchpad.

    You must be logged on as administrator to perform these steps.

    (a) open Device Manager by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Device Manager.

    (b) If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    (c) in Device Manager, click on mouse and other pointing devices , and then double-click the touchpad driver.

    (d) click on the driver tab, then click on uninstall the driver and follow the instructions.

    See the link below and download the latest drivers for touchpad to the computer and check if it helps.

    http://support.ASUS.com/download.aspx?SLanguage=en&m=touchpad&p=3&OS=30

    See also: http://support.asus.com/download/options.aspx?SLanguage=en

    Let us know the status of the issue.

  • The touchpad scrolling stops working during the AVG scanning

    I had problems with my touchpad scrolling intermittently does not not in Firefox for everything to doing some time-probably at least a year. I've probably tried all the common fixes without result. I found that if I sign out and then sign back in to Windows, scrolling will work perfectly until AVG antivirus does a scan or an update. It will not work again until disconnect me and reconnect. Firefox is the only application that is affected.

    I am running Windows 7 Home Premium (64 bit) with all current updates on your laptop Gateway ID49C, version FF 27.0.1.

    Thanks for your help!

    Hello!

    I figured out how to stop the break when an AVG scan starts. It seems that it is the AVG scan notification that appears in the bar of tasks that causes scrolling to stop working. When I disabled the taskbar notifications in AVG, the scans run normally and my scroll continues to operate correctly. So, I guess I don't really fix anything, but found a workaround I can live with that.

    Thanks for your help and assistance. If you find a permanent solution, please let me know. Have a great day.

  • Touchpad scroll after update

    I've updated my Dell laptop with the optional updates yesterday and my touchpad scroll no longer. Any help in how to activate this feature? I can't find it. Thanx

    http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

    Try the repost in the Hardware Forum above.

    See you soon. Mick Murphy - Microsoft partner

  • Como restore o Driver TouchPad

    Desinstalei one Driver TouchPad meu da for Netbook Asus, of gostaria e saber como posso novo instala-lo!

    Please select your language from the drop-down menu at the bottom of the page to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find the desired language, support for additional international sites options are by following the link below:

    Por favor, selecione o idioma na lista suspensa acima para enviar sua question no language of his choice. O forum go e voce para Inglés only. SE você não o idioma desejado acima, suporte para may find other localidades Affairs pode ser encontrada through link abaixo:


  • Portege Z30 / driver Audio Replicator + Touchpad scroll problems

    Hello.

    I bought a Z30 and I'm pretty happy with it that I worked for years with the Thinkpads (+ Dock)
    but there are a few light (more or less can be addresses as a driver) questions that I discovered.

    Notice: I use Win7 64.

    (1) with the Replicator Docking Station, I'm not able to remove the USB Audio device is currently running.
    As you play a video or music. -J' looked for a newer driver (from C-MEDIA) as the standard Microsoft Driver may not be the best choice but I have found NO Win7 drivers for this device. The pilots of C-MEDIA only I found is Win8.

    (2) ALPS Touchpad (pilot)... EH... the material error only on this model really seems to be the touchpad. It is quite difficult to click on buttons AccuPoint (those under the keyboard) and drivers of touchpard are not flexible somehow. Gestures are not actually enforced as it should... seems to be as ALPS had to work on without a lot of time. Synaptics would have been a much better choice.
    The driver cannot be adjusted to speed with scroll gestures and by default is AVERAGE... really ridiculous WAY to fast. In short, it is unusable for regular use. That the effects of tape, the gesture with two fingers and also the gesture of circle. He is desperately missing from a slider to change speeds. Or at least some indication of registry settings.

    Also please advice DAPS to add finger 2 tap as a regular feature in the driver. It can be used without any problem after minor registry change and it works without any problem.

    (3) in the manual NFC is listed, but I have not found ANY Z30 Z40 (Tecra) model has / contain probably the NFC module. -I've seen in some photos the flexband connector (must be for NFC) above the battery is actually present. -There will be a few spare parts (Please give me the ID number /) in the future?

    (4) smart card reader driver problem: I'm using the latest drivers and after some time and sleep (with Intel Rapid Start) the player first must be deactivated and reactivated to rework. certutil.exe - scinfo unresponsive until I have disable and re-enable the device.

    (5) I am absent in BIOS/UEFI to exclude startup devices. -This is normally a must have feature.

    I think that the user manual contain parts which refers to different models of Toshiba as Portege Z30-A/Z30t-A / Satellite Z30-A/Z30t-A

    Some models are equipped with an NFC function, but can not say with certainty what models support this feature exactly.
    It turns out that in many cases the m2 additional connector be responsible for these additional modules.

    Regarding the mode of UEFI: check if the BIOS update would add it. Some portable computers taken over this function after that the BIOS updated.

  • Tecra A7-202: Touchpad driver virtual scrolling does not work

    Hello, I have problem with Synaptics touch pad driver version 9.1.0 (laptop Tecra A7-202).

    When I run any program as administrator, virtual scrolling does not work.
    When I run the program as a normal user, everything is OK.

    Hello

    What's your Tecra preinstalled with designed Toshiba recovery image?

Maybe you are looking for