ProBook 4530 s sound does not work after reinstalling sound driver

Similar Questions

• HP Probook 6465b: Broadcom 4313gn does not work after the upgrade to Windows 10

  My laptop is HP Probook 6465b (model 2012) it came with Win 7 Pro pre-installed.

  I upgraded Win 10 and after that a Wi - Fi connection does not work. Then I tried the new facility, but it's the same thing.  I have come back to Win 7, but I would like to upgrade Win 10 if I can get the WiFi adpter for work.  My laptop otherwise works fine and it is not that old so I am confused why this wi - fi adapter gives me grey hair.

  Here is what happened:

  Just after upgading wi - fi works very well until the first stop. After reboot, free WiFi does not work and there is no wi - fi adapter in Device Manager. However, it's there, but it is hidden.

  I tried freezing and relocation of the map and I downloaded the latest drivers from HP Support, but I can't get the adapter to work.

  To get the internet to work I plugged USB wi - fi adapter and suddenly the WiFi Broadcom card started working also. She even worked after unplugging the wi - fi USB adapter but after reboot internal wi - fi adapter was missing again well (hidden and does not), it is too compligated to do each time and she even does not work every time, just every now and then.

  Any suggestions?

  pavis

  Please install the driver it works with the Windows 10

  WLAN

  Qualcomm Atheros QCA9000 series Bluetooth 4.0 + HS driver

• Jet 7 Tablet 5709: 10 Windows reinstall does not work properly; touch feature does not work after reinstalling HP sw

  I followed the steps of the http://h30434.www3.hp.com/t5/Windows/Windows-10-fresh-installation-on-the-HP-Stream-tablet/m-p/52038... to restore my tablet. The bottom line is - I use a keyboard and mouse, but tactile does not work, even after the installation of the various HP software specially required for the flow of data 7. When I start the Tablet, I can get the lock screen, but it cannot exceed.

  I tried to install Windows 8.1 USB, but I can't go beyond the screen who wants the product key. Should what product key I use? If I go back and reinstall Windows 8.1 the touch feature work?

  What can I do to get a running Stream 7 tablets?

  Hello Aberger,

  I guess that you have improved your 7 to 10 of Windows Workflow, but now you want to reinstall Windows 8.1, correct?

  If you went to go back beyond the 30 day trial period, you can use the image USB, you must have created 8.1 Windows before installing Windows 10.

  IF you have not done this media, you will need to clean install Windows 8.1 with Bing.

  You can not install ordinary Windows 8.1 copy unless you buy a new key.

  Machines that accompanies Windows 8.1 no longer a sticker with a key to the subject because the key is embedded in the bios. Installing Windows 8.1 with Bing will activate when he sees the key in the bios.

  During the installation process, you may need to click Skip to ignore entered the key until Windows has installed fully. If so, this will cause windows to enter a Limited State of Activation. When you connect to the internet to update, it will fully activate.

  You must contact the HP Support directly to the new copy of the installation media if you do not already have.

  Here is the link to contact...

  Contact HP worldwide | HP® official site

  Let me know if you have any other questions.

• Windows Update does not work after the hard drive has been replaced

  Hello
  I have the same problem, replaced in my Toshiba HD, rebuild from Sysimage, Windows Update does not work. A ran "fix the problem with the Microsoft Windows Update is not working.
  Problem still exist.
  The message that I got while trying to update: "Windows Update cannot currently check updates,
  because the service is not running. "You may need to restart you computer.
  Stop and then restart the service, still no luck.

  I ran Windows troubleshooting. He finds two problems with Windows Update components, it corrects.
  The problem still exists.

  The other post:

  Another interesting fact:
  After the reconstruction the new disk, user account control does not recognize Windows programs.
  for example: execution of Perfmon.exe, the Publisher is unknown! However, when I download the program Windows FixIt, Publisher is recognized as Microsoft Windows. It seems that user account control does not recognize the Windows programs that had found the new HD, but acknowledges those who is downloaded from the internet.
  I guess there is a problem with the license, Windows was preinstalled on the Toshiba and replace the hard drive could have caused a few conflicts of licensing.

  Separated from the:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/Windows-Update-not-working-after-hard-drive/77ab54ca-34b0-49DF-a268-bd07db68d887

  The same problem. Cloned old HD on a larger hard drive. Everything worked perfectly except NO indexing and update WITHOUT windows - the two recurring problems that seem to appear on the forums after a change of hard disk.

  INDEXING resolved with change to "Intel rapid storage technology." Google what I put in quotes, choose the Download Center and get the specific to your OP and the controller software.

  UPDATES have been a little more frustrating. The microsoft .fixes and convenience stores were without help.

  Go to control panel / system and Maintenance / administration tools

  Select Services

  Stop the Background Intelligent Transfer Service

  Stop Windows Update

  In 'My Computer' go to Windows / Software Distribution

  Right-click "DataStore" folder. Rename it to Datastore.old

  Rename the folder 'Download' Download.old

  Return to Services and restart the Background Intelligent Transfer Service and Windows Update.

  Look for the updates. It will take some time because you deleted the database.

  I hope this helps!

• WiFi does not work after reinstalling the system

  I have Pavilion dv6t - 6 c 00. I had to reinstall Windows 7 due to a virus. After installing all the drivers available from hp.com for my model, everything finally works but Wifi still does not (network controller shows lack driver even after I tried like 8 different). Here are the technical details:

  PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C & REV_01
  PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C
  PCI\VEN_10EC & DEV_8176 & CC_028000
  PCI\VEN_10EC & DEV_8176 & CC_0280

  Appreciate any help. Thank you!

  Hello:

  Download and install this driver.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5060882&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_105197_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Sync does not work after reinstalling Windows 7

  Sync works great between my Windows 7 Desktop and 8.1 tablet. The PC got a clean installation of Windows this weekend and now Sync does not work. I do not receive my bookmarks/history/etc on the desktop.

  -Two versions of Firefox are updated (40.0.2)
  -J' read the troubleshooting and installation FAQs
  -I am able to sign in sync on both computers
  -For the signature, I get a popup saying that Sync will begin momentarily and an e-mail notification. Nothing happens tho.

  I suspect that the problem is related to this 'new' version of Sync. I tried to follow the FAQ "Updated to the new version of Sync", I took off the two devices, I checked both are on the latest version of Firefox, but the next step is to create a new account to sync and it doesn't let me do, I plug my email and get "account already exists." What Miss me?

  The new profile created from the clean windows installed a fusion with other devices? Check the device to see if it retains profile data.

  Have you changed the password? This would stop all data from previous synchronization that was not local.

  If you go down this road of troubleshooting, the account must be deleted first. However to prevent data loss, you can click on remove account from accounts.firefox.com and then re - sign up.

• Network connection does not work after reinstalling Windows XP.

  Original title: problems with reinstalling XP.

  I had re format and re install windows xp but now my network connection does not work.  I have no IP address, even if my router and the pc are on DHCP. Device Manager tells me that the controller Ethrnet on the motherboard has no drivers, but I can't find a driver.  Any thoughts appreciated.

  Hi John Fisher_888,.

  You can download & install the drivers for the adapter from this link & check if it helps

  http://support.Dell.com/support/downloads/devices.aspx?c=us&l=en&s=Gen&SystemID=DIM_PNT_P4_8400&OS=WW1&OSL=en

  Hope the helps of information.
  Please post back and we do know.

• Fusion does not work after reinstalling bootcamp

  The previous installer: install Bootcamp with XP and using Fusion for xp from os x.

  I improved my internal hard drive and used superduper to copy on my existing mac partition.  However, my xp partition has not transferred because superduper does not recognize this.  I ended up reinstalling windows from scratch via bootcamp.

  I can boot windows very well.  The problem is that the merger will not start my windows partition.  I get this error message:

  «You have your IDE (disks/CD-ROM) devices configured in a State that won't work - you have an IDE slave with no master to ide0:1.»

  While this works on some BIOS and some actual machines, it doesn't does not correctly on a virtual machine. "Please place your disk/CD-ROM in ide0:0 to ide0: 1 in the configuration editor.

  I have run the uninstaller for the merger and then reinstalled but it does not work.  (It also remind my series, so I do not know it is how 'uninstalled').

  Is there a way to reset the merger?  I'm on 2.0.1.

  Thanks for any help!

  When the Fusion is not running, remove your machine virtual Boot Camp (and the virtual machine to help naos) of /Users/$ the specified item was not found./Library/Application Support/VMware Fusion/Virtual Machines /-since you changed the partition, it will not work in all cases. The next time that you run the Fusion, the virtual machine Boot Camp must be re-created.

• T61 sound does not work after reinstalling

  Hello

  I am re - install Windows XP Pro SP2 on many laptops.

  I have a problem with some T61.

  Installing the driver (found on the Lenovo Web site) is successful.

  Windows displays the audio icon, I can open it and change the volume, but I can't hear any sound.

  I'm sure it was working fine before the re-installation.

  I tried two ways:

  -driver install KB888111, then sound

  -driver install SP3, and then sound

  But none works.

  Do you have an idea of what I might have missed?

  Where can I get previous versions of the drivers?

  Thank you.

  Solved.

  The computer was cut after re-installation and the button above the keyboard did not work properly (I had to press really hard).

  Thank you.

• Qosmio X 870-button 3D does not work after reinstalling

  Hi all

  I like a nice clean install I always install windows me, that's what I did with my new Toshiba Qosmio X 870.

  I got everything to work. There are unknown devices not on the left, but the 3d laptop computer button does not switch to 3D. Instead, I have to rightclick the desktop > Setup NVidia > check / uncheck the box 3D.

  Being the lazy person I am I want to reduce the number of shares I must perform to toggle the 3D, so I want to restore the function of the 3D button.

  I found on the forums that I need to install the "TOSHIBA Remote Control Manager", here...

  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=270410#270410

  but I can not find this piece of software anywhere.

  Am that I on the right track here? Or should I do something else entirely to restore the button?

  Hello

  > but I can not find this piece of software anywhere.

  You can find this software on the Toshiba UE driver page in the section of the Qosmio X 870 driver:
  [Remote Control Manager v 3.0.1010.1 for Win 7 64 bit | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 381 & selSeries = 231 & selProduct = 7506 salt ShortMod = 3728 & language = 13 & selOS = 30 & selType = all & rupload = Yes & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = all & page = 2 & ID = 82405 & O SID = 30 & driverLanguage = 42]

  You must also install all the other stuff to Win the Toshiba especially page 7 the VAP.

• Satellite L40 - 18W - USB ports does not work after format HARD drive

  I formatted my laptop "L40 - 18w" after that all usb ports do not work.

  Could you please help me on this issue

  Thank you

  Ben is right. After the installation of the operating system as a first step, you need to install driver chipset.
  Please see the download page for Toshiba under http://eu.computers.toshiba-europe.com
  There you can find all the drivers for your model of laptop including driver chipset.

• USB does not work after reinstalling Win XP Pro on P10 - 504

  Hi all

  I have problems with my computer laptop satellite P10 504 series, I recently had to reinstall windows xp professional on my laptop, and since I had no usb recognision.

  all devices (disks to flash memory, wireless usb devices) all show the power on the power light, but windows does not detect the new hardware, I reinstalled now twice thinking it was a faulty installation but not luck...

  OS: XP Professional SP2

  I have no recovery / tools and utilities cd since they disappeared, downloaded all the drivers from the toshiba website, even tried using the latest chipset drivers intel on the NET, but none seems not to work...

  Help, please

  any help is always appreciated

  Thanks in advance
  Rob

  Hello

  I think only 2 possibilities:
  1. the USB driver is missing on the download page. Then, you should contact Toshiba service.
  2. I found a Quick Fix Engineering Q822603 for USB drivers. Maybe by installing this will help.

  I'm sorry that I don't have a better idea.

  Good bye

• HP Pavilion 17: mouse pad does not work after replacing hard drive

  Hello

  After replacing hard drive and installing windows 8.1, I can't use my mouse pad.

  I installed the Synaptics driver but it didn't help.

  How can I check that mousepad device is not damaged when replacing the hard drive and which also can I try to fix the mouse pad?

  USB mouse works fine.

  See you soon

  The only way to be sure is to open it up and see if the touchpad cable was disconnected during the upgrade of the hard drive. That's my bet. Easy to forget when you're winding. You don't provide complete model number, but many of the recent models Pavilion 17 require removal of the cover together to get hard disk that requires disconnection of the touchpad cable.

• T41 - OSD does not work after reinstalling

  Hello community IBM.
  I have a little problem with my IBM T41 laptop. The reinstallation of Windows XP SP2 and completely reinstall the drivers for the machine as usual but the screen does not display the sound controls and light as always. Please help me solve this problem. I want to thank.

  Hello
  OK, so let's just summarize:
  you have the following:
  Power management driver:
  http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo&lndocid=MIGR-4GXPEG
  http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo&lndocid=MIGR-54520

  Driver Hotkey:
  http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo&lndocid=MIGR-38953

  Power management feature
  http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo&lndocid=MIGR-44226

  It is worth noting that most of the latest versions of the diet and Hotkey handler support is no longer your system, so please make sure you have the cersions above of the installed apps/drivers.

  For a complete list of all the drivers, that integrate with your system, please see this link:
  http://www-307.IBM.com/PC/support/site.WSS/product.do?template=/ProductPage/Landingpages/productPage...

  Let the mek now, if this makes any change.
  In case if it is also possible, please describe a little in detail, what you're exactly missing, because right now I guess it's the OSD, you usually see when you turn the audio up/down. (while making sure, that we are talking about the same thing)

  See you soon

• Windows 8 Pro key does not work after changing HARD drive

  I had bought a Lenovo machine without installation of the OS and installed a Windows 8 Pro (and not an upgrade).

  After activation ( laptop settings-> activate Windows ) and control, the copy of Windows has been properly activated.

  The machine worked fine for 7 months before the hard drive crashed and I had to replace it. (Without recovery).

  On installation the same Windows 8 Pro on the new HARD drive again, it shows " this key did not work." "If please check and try again or try a different key"

  Please suggest a solution to this problem.

  If my copy of Windows would have been an upgrade version, it would not have worked the first time.

  Have you bought a copy of manufacturer of OEM of Windows 8 Pro system? Because there was no full version boxes retail copies of Windows 8 Pro. The following work around to try to see if it works with your copy and then try the phone activation;

  http://www.eightforums.com/tutorials/13375-clean-install-Windows-8-upgrade.html

  Activation of the phone:

  1. press the Windows key + X , and then clickrun, and then type: slui.exe 4

  
  

  2. then press the ENTER"" key.

  3. Select your "country" in the list.

  4. choose the option "activate phone".

  5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  6. explain your problem clearly to the support person.