Drivers (Asio?) Center Audio/USB multimedia Hub

Similar Questions

• Error message try install drivers for Toshiba Multimedia Center Audio/USB Hub

  Hello

  I use a Toshiba Satellite P100-102 and a Toshiba Multimedia Center Audio/USB Hub SB0500 with the new Windows Vista Ultmate.
  When you try to install the drivers for the multimedia center the following error message appears:

  A service install article this INF is invalid.

  I also tried to install the Center Multimedie with the installation CD, but it doesn't, because the installation program could not identify the USB hub even if the USB cable is connected to the Media Center and the laptop.
  I also tried to find drivers for Vista on the Internet, but without success.

  How can I solve the problem?

  I would be really happy if you could help me!
  Thank you!

  You are 100% sure that this driver was designed for Vista?
  Maybe it s is not compatible with the new Vista operating system and it works only with XP

• Portege R700 - Win7 - cannot find the driver for USB Multimedia Audio Device

  Are there any Windows 7 drivers for the "USB Multimedia Audio Device" found on a R700 with the Toshiba Hi Speed Port Replicator II (PA3916U-1PRP)?

  In "Devices and printers", there is a device in the section called a + USB Multimedia Audio Device + Unspecified +. Windows 7 can not find the drivers for it. Audio seems to be working through the port replicator.

  The only related issue I've seen is that sometimes, when I press the "eject" button, Windows complains that a device is in use and the ejection is defective. This is very similar to that reported as ' [Undock R700 question P3838 |]» http://forums.Toshiba.com/T5/General-troubleshooting/R700-undock-from-P3838-issue/TD-p/149453].

  In my case Windows tell me an application to use it or the device in use. I strongly suspect the audio device.

  I have not found a solution so eject manually despite the failure or sleep it and then eject manually. I didn't notice the two approaches being necessarily better.

  HI PeterH,

  Just a simple question: do you use the preinstalled version of Windows 7 at Toshiba and you have most unknown devices in Device Manager or just this USB Multimedia Audio device?

• Audio Usb Hub 3 x Usb 1 x Lan on 5.1 Surround Sound card?

  Hello

  I want to buy a Usb Audio Usb Hub 3 1 x Lan onboard x 5.1 Surround sound external device, but my question is: can I use 2 outputs to give a different signal?

  I use Traktor DJ Studio and I want to use an output for the player on the left and an output for the player from right, is - it possible to do this whit a Usb Audio Usb Hub 3 1 x Lan onboard x 5.1 Surround sound divece?

  Hello

  Is there no possibility to check how it works before buy you? You will be very happy if someone here has already tested. ;)

• Require the NDIS2 drivers for HP LAN and USB travel hub

  Hello

  I have some ultrabooks with no LAN on board, which I am trying to use an image Ghost (the network).

  I use a HP LAN and USB hub, but to get the ghost to work, I need drivers BACK (NDIS2) to get this working.  Any ideas where I could get these in.  I had a good glance but had no joy so far.  All of my generic drivers seem to fail too!

  Thanks in advance!

  Hello, I'm not familiar with the "HP LAN and USB travel hub", but I used a good amount of Ghost!

  I think that it can be difficult to get this ethernet device works in DOS mode.  One of the problems is that DOS itself does not have support for the USB, so you would first get drivers in real mode USB installed and then find/layer drivers for HP LAN and USB travel in addition to this hub.

  This looks like a difficult task.  Must the ghost image be stored/retrieved over the network?  It may be easier to use Ghost with a local storage device, for example a USB optical drive or an external/USB drive (if that's an option)...

  Another option would be to use a different disc Imaging program (the one who works within Windows, or something like a Windows PE boot disk uses instead of BACK).

  I hope this helps!

  Dave

• I need drivers for Fresco Logic USB 3.0 Root Hub on Asus 53 SN Win8 Pro.

  After a reinstall of Win 8, Manager of devices shows a driver missing for Fresco Logic hub USB 3.0. The series of Fresco Logic FL1000 Controller seems to work fine.

  The hardware ID is FLUSB\ROOT_HUB_FL30
  Prior to the relocation, there is no problem, but it took a while to find all the drivers after the upgrade of Win8 of Win7. But I can't remember how I had solved the problem right there. There is no drivers for Asus.
  If anyone has solved a similar problem would offer a way, I would appreciate it a lot.

  Hello

  I understand that you need drivers for Fresco Logic USB 3.0 Root Hub for laptop running Windows 8.

  I suggest you to download and install the drivers from the link.

  http://support.ASUS.com/download.aspx?SLanguage=en&p=3&s=271&m=N53SN&OS=30&ft=22&F_NAME=USB_Fresco_Win7_64_Z301163.zip#USB_Fresco_Win7_64_Z301163.zip

  Given that Windows 8 compatible version of the drivers is not available, I suggest you to download Windows 7 compatible drivers from the link and install it in Windows 7 compatibility mode.

  See the link given below to install the drivers in compatibility mode.

  Make the programs more compatible with this version of Windows

  http://Windows.Microsoft.com/en-in/Windows-8/older-programs-compatible-version-Windows

  I hope the information helps to find the drivers for Fresco Logic hub USB 3.0 root, if you have requests or questions about Windows, feel free to post. We will be happy to help you.

• Peripheral Audio USB-Mulit-channel has a driver problem and PnP device problem.

  I try to use the blue ice pre - amp for recording. Under channel-Mulit-USB Audio Device, device status, it displays "this device cannot start. (Code 10) "once I start the troubleshooting process it shows that even after reinstalling the driver it still does not work and that there is a problem with the device PnP I already tried to uninstall the driver and restart my laptop to let windows try again but nothing works.  Please help D:! Thank you all very much! :]
  -Kyle

  Hello

  1. is this problem limited with a specific USB device?

  2. it worked before?

  3. using this unit for the first time on this computer?

  4. the other USB devices work properly?

  Method 1: Run the troubleshooter and see if it helps.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  The Code 10 error applies mainly to the problems of hardware driver and devices or compatibility problems between the drivers of equipment and additional software that is installed in Windows. Therefore, we recommend that solve you these problems with emphasis on device drivers, configuration of device problems and hardware compatibility issues. You may need to update the chipset drivers and the USB controller

  Follow the given article below for more information.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

  In addition, update the driver from the manufacturer's Web site and see if it helps.

  Method 3: Uninstall and reinstall the USB drivers and check if the problem persists

  1 disconnect all USB devices except the USB keyboard and mouse.

  2. click on start and type device manager in the start search box and press ENTER.
  3. Select the Device Manager and a pop-up window will Device Manager.
  4. click the + on controllers USB Bus to develop it.
  5. right click on all controllers USB and USB Root Hub that is listed, and select uninstall.
  6. restart the computer.
  7. plug in the appliance and check if it works.
   
   
   
   
  I hope this helps.

• Uninstalled the USB root HUB and now computer will not work

  Hello

  Just got a new computer and I'm afraid I might have broke it...

  My computer is a HP Envy 23-c100xt with Windows 8.

  I tried to use one of the ports 3.0 and 2.0 and it wouldn't read my USB, but I tried on another computer so I know this isn't the USB. So I followed some web tips online here and did this:

  Click on start and type device in the search for field, and then select Device Manager uninstall USB root hub

  Restarted my computer and the screen refreshes itself automatically every 4 seconds. Cannot open any program or even go to Manager tasks.

  Help, please!

  Thank you!!!

  Jess

  Are you sure you don't have anything else? It is difficult to see how to uninstall a device could lead to consequences also as usually convince windows NOT to reinstall the drivers and devices, it is what causes the trouble, not the other way around.

  Uninstalling devices does not lead to what you describe.

• Audio USB device not recognized by flow 7 Tablet PC

  Half the reason I bought the 7 flow was to use it has a music player with my D2 USB Audio DAC Headdphone Amp iBaso.

  The device is recognnized by my Office Win 8.1 and all other computers, I plugged in.  Why it is not recognized as an audio playback device is beyond me.  I tried all of the suggestions that I could find on the net without a bit of luck.  Is therte a reason why this feature has been disabled on the 7 Strwea?

  Problem solved!

  It turned out to be a combination of the usb cable and the USB OTG hub.  The iBaso has been specific cable on the device being recognized on my desk.  When I tried the work cable witht the OTG hub on the 7 of flow is not as usual.  But when I tried the market good adapter monoprice it worked.

  Audio usb solves the problem of horrible noise with the jet 7 lookiing for a fix for anyone.

  The OTG hub works with a mouse and a player mSata perfectly, but not with the iBAso CAD.

  Thanks to all who responded to keep me by train.

• The headset audio USB deforms after initially connect xbox 360 controller for windows

  Hello world.

  It seems that many people (including me, now) start meeting audio distortion after they plug a Xbox 360 controller for windows on their computer for the first time. I have a headset Audio USB of Dynex Mono, and whenever I try to use the microphone, the sound comes out distorted. Also, when I try to use the earphone to listen to whatever it is that the audio is also flawed.

  Did anyone here know what I can do, so I can get the controller and the helmet the two working together in a computer? The headset works fine in another computer.

  I have Windows XP Home SP3.

  writing in the new message: * e-mail address is removed from the privacy... *

  Hello world.

  It seems that many people (including me, now) start meeting audio distortion after they plug a Xbox 360 controller for windows on their computer for the first time. I have a headset Audio USB of Dynex Mono, and whenever I try to use the microphone, the sound comes out distorted. Also, when I try to use the earphone to listen to whatever it is that the audio is also flawed.

  Did anyone here know what I can do, so I can get the controller and the helmet the two working together in a computer? The headset works fine in another computer.

  I have Windows XP Home SP3.

  The Xbox controller draw right on the edge for a USB port, putting pressure on all of the USB bus, especially if there are other USB devices. If you get an external USB powered hub to add to your system and plug the controller, you will solve your problem.

  I had the same problem with my Creative Labs USB sound card and the Xbox controller at the same time. I picked up a Zonet similar to this (different brand):

  http://www.Newegg.com/product/product.aspx?item=N82E16817182168

  I plug my controller, keyboard, and mouse dongle in the hub and plug my sound card directly into one of the ports on the back of the PC. Problem solved! I got no sound since problem.

  SC Tom
  -There is no such thing as TMI if you request technical support.

• No sound from my computer. I installed the drivers. in the audio preferences, it says "no audio device".

  I have three sound devices: my soundblaster PCI motherboard built in audio (realtek HD audio), and my graphics Nvidia card (via HDMI).

  I installed the drivers for the soundblaster and graphics card. I tried allowing both at the time and only one at a time. not appear as selectable "audio devices" in the audio preferences, but they appear under the "hardware" tab when I activated, I did it has been set to use the mixer for the device.

  When I had to install the realtek driver, the sound test in the driver software would play the sound. but he would not always recognize all audio devices.

  Probably missing me something simple.

  Hello

  
  I suggest you to uninstall all the audio drivers from the computer.
  a. click Start , and then click RUN.
  b. in the RUN line, type devmgmt.msc , and then on enter.
  c. This will open the Device Manager window.
  d. Browse sound, video and game controllers.
  e. right click on each of the drivers see you, and then click Uninstall.
  f. you may asked to delete the driver completely. Please, put a checkmark and complete uninstallation.
  g. restart the computer so that the changes are applied.
  After the reboot, I suggest you to download the audio drivers from the computer manufacturer's website and install the same.
  Restart the computer and then install the drivers for other audio devices
  It will be useful.

• I have rebuilt my laptop Gateway MX6625, did not drive recovery, is went to the gateway web site, all the drivers have worked except the multimedia sound. The gateway was no help, they told her, but the there does not work

  I have rebuilt my laptop Gateway MX6625, did not drive recovery, is went to the gateway web site, all the drivers have worked except the multimedia sound. The gateway was no help, they told her, but the there does not work

  Hello JesusVigo,

  Thank you for visiting the Microsoft answers community.

  Have you tried to use the disk of Windows XP, or Windows Update running default drivers to search for best driver for your sound card?

  Also, I found only 1 driver on your system gateway Web site is located here.

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Center Toshiba multimedia, Audio / USB Hub

  Hallo

  I have a very simple problem with this great work and useful feature - the installation with software and drivers CD is broken. I looked everywhere but it is impossible to find even the drivers. So, you're my last chance - if anyone here can send me these drivers or show me some ftp to download.

  Thank you

  Hello

  On this forum, you can find almost just to users with different questions for laptop. You will be very happy if someone can help you. I googled a bit but I didn't found any page with the correct drivers. Try contacting your local dealer where you bought it. Maybe they can help you order a new CD or even borrow a.

  Good bye

• Center multimedia USB Audio/USB HUB

  Today, I bought this station for my M60-139 for a 5.1. After I installed everything, I see, a creative card is... nice inside but...

  I can not change sovereignty ang bass (sorry for my bad English).

  For a better understanding see my screenshot:
  http://img245.imageshack.us/my.php?image=crap4hw.PNG

  This is not good, because the sound is without any Highness...

  Can someone help me?

  Thanks in advance

  Carsten

  Hello Carsten

  Nice camera. I hope that the device meets your expectations. I have no experience with this unit, but check in s operating manuals if there is a line number where you can call and ask for a suggestion or explanation.

  Good bye

• Impossible to get multimedia work center Audio/concentrateur USB 5.1

  Hello

  I wonder if someone could help save my sanity...

  I used a laptop Toshiba Tecra A8 now for awhile with no problems. This forum works with Windows XP. I love it, its great, all except for one thing.

  I REALLY miss my Creative 5.1 speakers for listening to music in my room box when you work from home.
  They're just sort of stand there on the window sill, who yearns to be used...

  So, I thought, he MUST be an external USB card 5.1 sound I could buy in order to allow these speakers to be operational once more. Imagine my surprise when I found out that Toshiba is such a thing!

  In my simple way, I thought it must be the best solution, for the purchase of an accessory of the same manufacturer as the machine itself.
  It would be child's play and I would once more tuned to the end superior quality and punching bass... EVIL!

  Now, I have installed and uninstalled the software 3 times.
  The thing works pretty as a USB hub extra, not perfect, no probs at all, but try to get a single note of music of the thing? Forget it!!!

  I can get sound from Laptop speakers when the usb cable is not connected in.

  Whenever I do connect the multimedia center (?) to the laptop I get the wizard 'new hardware found' come & I'm too simple to be able to simply say this shit where files that are now necessary can be.

  So I ask, for all your powers to solve this problem before I charge the laptop, the speakers, the multimedia (?) in the car and go to the Toshiba headquarters at Addlestone to demand satisfaction.

  Thank you very much for everything that you can do to help me hear sound on these speakers.

  Soulster

  Nice story, but I can't find your poster a single word on this device.
  Can you please tell us the model?