Center multimedia USB Audio/USB HUB

Similar Questions

• Error message try install drivers for Toshiba Multimedia Center Audio/USB Hub

  Hello

  I use a Toshiba Satellite P100-102 and a Toshiba Multimedia Center Audio/USB Hub SB0500 with the new Windows Vista Ultmate.
  When you try to install the drivers for the multimedia center the following error message appears:

  A service install article this INF is invalid.

  I also tried to install the Center Multimedie with the installation CD, but it doesn't, because the installation program could not identify the USB hub even if the USB cable is connected to the Media Center and the laptop.
  I also tried to find drivers for Vista on the Internet, but without success.

  How can I solve the problem?

  I would be really happy if you could help me!
  Thank you!

  You are 100% sure that this driver was designed for Vista?
  Maybe it s is not compatible with the new Vista operating system and it works only with XP

• Audio Usb Hub 3 x Usb 1 x Lan on 5.1 Surround Sound card?

  Hello

  I want to buy a Usb Audio Usb Hub 3 1 x Lan onboard x 5.1 Surround sound external device, but my question is: can I use 2 outputs to give a different signal?

  I use Traktor DJ Studio and I want to use an output for the player on the left and an output for the player from right, is - it possible to do this whit a Usb Audio Usb Hub 3 1 x Lan onboard x 5.1 Surround sound divece?

  Hello

  Is there no possibility to check how it works before buy you? You will be very happy if someone here has already tested. ;)

• Satellite C660-28V - USB hub problem

  Hello

  1st of all I'm not at all English-speaking countries so forget all accidental that confuses a may (and I will approve me) write down.

  So, how do I write about this threat, I have problem with my usb hub that I try to explain what exactly past in my book but the 1st I have satellite model n. c660-28v part No. psc1ge-03j008cz running win7/64 and on Toshiba support article for this specific book cant find any generic hub driver usb or any driver related to USB in all the

  Some about 2 months I reinstall my OS not with recovery, but with clean OS and I have the problem since.
  Since then im not able to find or fix this something driver works but not all... some external drives, flash, mouse, keyboards readers work at all before re-installing everything works fine.

  Its not so bad, but sometimes it drives me crazy, especially in times when im in a situation of time when I have no time for disorders like that readers

  Book always telling me that I have the latest drivers even after uninstalling and rebooting.
  If this is not enough given just ask

  Thx for advice or support that u can give me

  Suzeline

  Hello

  I ve checked specification for your laptop and I can see your laptop was initially offered with Win7 64 bit so I do not understand why you do not use this original version.
  You can install the original recovery image and optimize it to your needs.

  OK, you may want to have the Ultimate version and your own installation of operating system should not be a problem because all the necessary drivers, tools and utilities that you can download drivers Toshiba download page - http://www.toshiba.eu/innovation/download_drivers_bios.jsp

  Of course, that we know not what you have installed and how it looks like when you open Device Manager. All hardware installed and registered correctly?

  In any case, I can say, is that all the drivers for Win7 64 bit, tools and utilities are available, and you must install all the.
  The right installation order is as follows:
  Windows 7 64 bit
  TOSHIBA Assist
  Chipset SW installation utility
  Intel Management Engine Interface
  Intel driver
  Intel Rapid Storage Technology driver
  Realtek Audio Driver
  TOSHIBA supervisor password utility
  TOSHIBA HW utility
  TOSHIBA Flash Cards Support utility
  TOSHIBA Value Added Package
  Realtek LAN Driver
  Synaptics Touch Pad Driver
  Realtek card reader
  Bluetooth Stack for Windows by Toshiba
  Wireless LAN driver
  ConfigFree
  TOSHIBA Network Device ID registry tool
  TOSHIBA Web Camera Application
  TOSHIBA face recognition
  TOSHIBA HDD_SSD alert
  TOSHIBA Service Station
  TOSHIBA Disc Creator
  TOSHIBA Media Controller
  TOSHIBA Media Controller Plug - in1.0.5.11
  TosVolRegulator_x64_1.1

• Satellite M300: speech recognition only works with external usb hub

  Hi all

  I have the Satellite M300 I could run the speech recognition program before you have the motherboard replaced due to failure of the usb.

  I found using the headset, I can not reach high enough quality to operate it.
  The only way I can use the Word program, use an external usb hub with its own power supply.

  The problem concerns the audio card, or simply not enough voltage?
  And na fix?

  See you soon

  Craig

  Hello

  The notebooks of USB ports provide a standard power of 500 my.
  As I said that it is a standard, but in USB devices different part 3 external cases need more power.

  For example, one of my external USB 2.5 HDD s must be connected with two USB ports at the same time to ensure that the HARD disk would get enough power to function properly.

  Your external card is unknown to me but maybe it needs more power as usual.

  Welcome them

• Communication via a USB hub

  I have a pair of FuTek USB210 devices which work perfectly when it is connected directly to the computer, but have significant issues, if I try to plug them into the 10 ports Plugable USB hub.  I have a large number of instruments that I need to connect, and I'm afraid I won't be able to talk to them through the USB hub.  The devices in question come from a number of manufacturers (not all who want to play nice with LabView), but are almost universally using connections series at the exit that I turned to USB somewhere along the line.

  The Center will be a problem?  If so, how can I communicate with other devices via the hub?

  You should not worry.  The pilots were probably written with some DLL that identifies the units, or VISA resource found.  These layers of the Protocol are supported for you and your need not care where the device is connected, only that Windows can detect it (Device Manager is a good starting point)

• Try to install USB hub, error: device driver software was not successfully installed. Please consult the manufacturer of your device to help get this device installed.

  Software device driver has not been installed successfully. Please consult the manufacturer of your device to help get this device installed.

  Failed. Generic USB hub.  I went to the Device Manager and clicked on update, but it did not work. Can you help me.

  original title: DEVICE DRIVER has NOT been INSTALLED successfully.

  Go to your computer manufacturer's support web site and search for the Windows Vista drivers for your specific model number.

  If there are drivers Windows Vista, then to download to a folder on your hard drive and install all of them, in starting with the card mother/chipset drivers SATA, LAN, Audio, USB, Etc., and so on.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  If you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the latest Windows 7 / Vista drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  J W Stuart: http://www.pagestart.com

• Belkin USB HUB F5L009

  This point has worked on Windows 7 now I am Windows 8 elements appear in the control center software, but does not any ideas connect

  [Moved from comments]

  I solved this problem.

  In ' Manager (devmgmt.msc) Windows device, the SXUPTP driver showed as disabled. Windows gave a warning that the device was known to have stability problems. I discovered that SXUPTP is a driver of a company called Silex. Flint makes network USB hubs, so I guess the hub from Belkin is a hub of renamed Flint.

  To update the Flint driver follow these steps:
  1 close the tray of the network Belkin hub application.
  2. download the latest version of SX Virtual Link (sx - virtual_link_win_3120.zip).
  3. extract all the files.
  4. in Windows Explorer, navigate to the sx-virtual_link_win_3120\s-33a3120\Files\Bin\Sxcsapi\WinVistaX64 if you are running a 64 bit OS, or sx-virtual_link_win_3120\s-33a3120\Files\Bin\Sxcsapi\WinVista if you running a 32 bit OS.
  5. right click on 'Sxuptp.inf' and select 'Install' from the menu.

  The driver will be installed and the warning in the Device Manager icon should disappear. You may need to reboot for the changes to take effect.

  I hope this helps.

• D - Link USB Hub DUB - H7 works do not correctly with Windows 8

  I am also having the same problems.

  Very recently, I went from 7 to 8.1 and with the operation of the steam, the sound of connect/disconnect repeats about every 10 seconds. If I disconnect the D - Link DUB - H7 sound no longer appears.

  I could live with it for the time being cut just sounds system, but unfortunately the problems don't stop there.

  If I have my USB DAC (sound card) connected via the hub, pilots always crashes in a few minutes in Spotify or any multimedia player. It means that I actually listen to music at all.

  Hardware troubleshooting does not detect any problems at all. For now I'll connect my USB DAC separately and cut system sounds, but it is not a solution. Never had any problems with this hub in Windows 7 and I don't really feel like buying another usb hub since it fits my needs perfectly.

  Separated from -.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/d-link-USB-hub-dub-H7-not-working-properly-with/1158a3bc-487d-40C1-b3d0-2419ace3ef2e?page=2

  Hello

  Answer the next question to learn more on the subject, that you are facing.

  What is the brand and model of the computer?

  Install the chipset drivers by downloading from the website of the manufacturer of the computer and check the status of the issue.

  I also suggest you run the Fixit from the link next and if it helps fix the problem.

  Hardware devices do not work or are not detected in Windows,.

  http://support.Microsoft.com/mats/hardware_device_problems/

  Please let us know if you need assistance.

• Drive external hard connected via USB hub: icons not showing on desktop

  Hi... on an iMac 2015, using a USB hub 3.0 occasionally to connect an external hard drive (which stores these things as art assets)... but the external hard drive icon does not appear on the desktop... it IS in the sidebar of Finder, though...

  But on the icon the Finder sidebar, the small icon "eject" gray is missing, and the only way to eject is to right click and select "eject" or use the eject button in the Finder toolbar... it's okay...

  But is there a way to display the icon on the desktop, so I can always remember to eject the disks attached?

  (the desktop icon shows normally when connected directly via the USB ports at the rear)

  Thank you.

  Finder-> Preferences-> general, check the appropriate boxes under "show these items on the desktop".

  [My personal choice is them having all checked]

• A powered USB hub will support Ethernet / USB?

  Wifi in my office is uneven, so I need to wire a Macbook Pro (if that's the term). Because the Macbook Pro is not an ethernet port, I get an ethernet cable / USB. I also get a USB hub with an AC adapter.

  I know that you should not the ethernet cable / USB in a hub that is normal because it won't have enough power. But a powered hub will provide enough power for thin ethernet connection? (This laptop gets transported frequently, so I want to minimize the number of items that need to be plugged in every time.)

  Thank you-

  Christine

  I wouldn't use a usb to Ethernet port, I would use the port of Thounderbolt ter http://www.apple.com/shop/product/MD463LL/A/thunderbolt-to-gigabit-ethernet-adap

• suddenly stops when the external usb hub is attached

  My imac 27 inches 5 k 2015 suddenly stops when an external USB hub is attached supposedly designed specifically for the mac. (Cutting) The mac does not start I have to unplug it and reconnect to restart. I tried different hubs of this manufacturer and all do the same thing. Remove the hub, the computer is fine. Any ideas?

  Well, try an another factory USB hub, I had good success with USB hubs powered from Belkin.

  Question... are the hubs help powered or are bus powered USB? They are bus powered USB is your problem, the USB ports on iMac didn't supply enough power to power bus-powered USB hubs.

• Airport Extreme and USB hub

  Hi all!!

  Witch of USB hubs with printer and hard drive connected can work with last gen extreme airport?

  Witch is good, the best of the witch? Powered? No powder?

  You can use any hub powered; USB port of the AirPort Extreme provides only a limited amount of energy itself, and is not enough to support many readers.

  (142446)

• Time machine on a usb hub

  Last summer, my iMac (running El Capitan) 2010 started hooking serious problems where the only solution would be to perform a reboot of the material.  After much experimentation and running on an external drive, I discovered that Time Machine was the culprit.  That is, when TM was off, the Mac has worked well, but if I turned back on, after 12-24 hours of TM, the Mac, would essentially become unusable and require a restart of hardware.  While I would certainly prefer to have current backups made via TM, there is nothing on this machine that had not been saved on other storage devices, so I was happy to let it go for several months.  Thinking maybe TM two disks, I had been using had been corrupted, I have them off and on again 5 TB (internal drive is 1 TB).  Once again, the same results.  Thinking maybe the USB hub was at fault, I replaced the hub last night.  This morning, everything seemed fine, but four hours later, after being in mode 'sleep' for most of the time, it was frozen again.  I have attached from the player to the USB port on the iMac Freedmen and will wait to see what happens.

  Now I read that Apple has recommendations for the use of TM and nowhere in there is a mention, a USB hub, for or against.  Anyone has any information (even if it's just anecdotal) regarding the use of the Time Machine disks via a USB hub?  For the record, the drive is a Seagate 5 to, USB 3.0, and I connected via USB 2 and 3 USB hubs with the same results (suspended).

  Anyone who can shed light on this aura of gratitude.  It has been confusing me for some time - especially since it seems that nothing of what I found to indicate that you can not or do not use a Time Machine drive via a USB hub.

  These hubs are externally powered? And what else is connected to them?

• drive external hard connected via usb hub powered Time Capsule guard fall...

  Hello.

  Try using a player external 3.5 "connected via USB hub powered to my Time Capsule to serve as a backup Time Machine secondary.

  When I connect the external hard drive, it turns out, and everything seems good (Yes it is correctly formatted). I see the external hard drive in my time machine preferences panel and also the desktop browser window, etc..

  After selecting the drive hard as the second backup TM, I start TM. After a few minutes the backup fruitbodies. Audit of airport utility, the drive no longer appears in the profile of Time Capsule. I can't turn back the drive without unplugging / plugging the USB cord. I went to HD (WD green 4to) and HGST 4to - deleted both.

  What is the speaker (the box is powered)? Can you have a USB hub between the external hard drive and time capsuls? Something else?

  Just seems like something somewhere that expire, causing it to drop the connection...

  Thanks for your useful suggestions to fix this!

  Is your TC the Gen5, model AC?

  I must say that your experience is not uncommon. I tested it myself recently and was disappointed in how the poor reliability has been... Although not as bad as yours... in fact cutting in a few minutes to start a backup is ridiculous.

  What is the speaker (the box is powered)?

  Quality of the envelope varies a lot... What is it??

  If this is the typical brand X... Plug it into your Mac. is it reliable?

  Go to your control panel and dig up the actual USB chip used... I don't know if we can help on type a lot. But it helps us determine the fleas are a problem.

  I found the hard drive in the finder to mount helped... not the sparsebundle that must be mounted by Time Machine... but the disk must be mounted in the finder so that you can copy files back to him.

  I start TM. After a few minutes the backup fruitbodies.

  Check in the finder, it has created the sparsebundle and works.

  Can you have a USB hub between the external hard drive and time capsuls?

  It's our usual recommendation... but he won't always help... especially if the USB hub is another brand X...

  Note that all societies are changing USB tokens at the drop of a hat... some seller of a rival company arrives and offers them 1 c off the coast of 1 million chips it is common to spend even in the middle of a race. Even the tenors have no satisfactory fixed hardware...

  The computer has loads of memory... and may contain drivers for hundreds of different USB tokens... but the TC is a very limited amount of space and with questions if the driver is not fair.

  I started a thread for a database just now... has not progressed much.

  https://discussions.Apple.com/thread/5912861?TSTART=0