drivers for Alienware tactX keyboard and mouse

Similar Questions

• For Microsoft Wireless Keyboard and Mouse 5000 USB dongle

  My USB dongle for wireless and mouse 5000 keyboard broke. Where can I find a new dongle?

  Try here:

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  I'm not sure that they will be able to replace the dongle only, I believe that the dongle and the material is matched or paired to work with each other, that way you don't end up controlling a mouse or a keyboard in another room...

  John

• Where can I get a Transceiver for my MSwireless keyboard and mouse?

  My USB is not responding on my laptop for my mouse and keyboard.

  Can I get a new USB for this problem?

  It is repaired, after that I ran the disc again

• Uninstall the usb keyboard and mouse

  I am swapping a USB keyboard and a USB mouse for a combo keyboard and mouse Logitech MK360 wireless on my Dell Optiplex gx620 desktop (Windows 7).  Do I pull up the Device Manager, go to the properties for the keyboard and the mouse and click on uninstall BEFORE or after HAVING physically remove connectors USB keyboard and mouse to the USB ports on the Office?  Should I use before removing connectors USB Safely Remove Hardware?  Thank you

  USB keyboard/mouse can be disconnected without using the icon "remove."  In fact, I would be shocked if they were still on the list safely remove at all.

  But to answer your first question, which depends on whether you want to keep pilots autour for future use.  If this is not the case, go ahead and uninstall the device before unplugging.

• dongle USB wireless keyboard and mouse

  Anyone know if it is possible to buy a USB dongle for wireless HP keyboard and mouse?... mine disappeared while moving into a new House.

  Thank you.
  Riko

  This missing dongle can be found at codemicro.com first part number RG-0638, and the cost is high, $39,95 paid shipping charges. You can also buy

  a combo mouse/Dongle for about $5.00 more. Be sure to check the part number on your mouse if you want the same combo that you had.

  Good luck. Mine is dead, but I refuse to pay $ 40 million for a $ 2 million item that HP should have in stock. Their part number is HP 5188-7334

  does not store. After about 2 years know not even how to find one.

• Add Hardware Wizard asking to install drivers for the keyboard and mouse.

  Original title: Assistant material is locking up my computer...

  Assistant adding hardware asks me to install the drivers for the keyboard and mouse however, it locks the computer and I can't type or click on anything whatsoever.  If I go into the set-up menu to reboot, the keyboard works fine.  How can I stop this from happening?

  I was able to run an analysis of the system through the establishment and who has solved the problem of mouse enough to do what else to do to solve the problem.

  Thank you for your reply and your help.

• Where can I find the software for my model 1027 keyboard and mouse 1007?

  I have software 6000 for microsoft wireless comfort keyboard and mouse, I have a new computer, but the disk is missing, where can I find the software on the Microsoft site?  I have exhausted my resources as hardware microsoft pages do not list my keyboard (1027) (ms part no: X-802424-01), or my mouse and the suite has drivers for all the buttons.  Can you help me?  Thank you for your time I really need this program for my hardware working...

  I have a Microsoft Wireless Keyboard 6000. It gives also a part number, but it is not the identification of driver download.

  Go to http://www.microsoft.com/hardware/en-us/d/wireless-keyboard-6000
  Enter your operating system and download the drivers if you have 32-bit or 64-bit.

  Then go to the section of the mouse.
  http://www.Microsoft.com/hardware/en-us/d/wireless-mobile-Mouse-6000
  They do not list the mouse or the keyboard, based on part number but the name. Return your Microsoft keyboard and mouse and get the exact name of your hardware.

  I hope this helps.

  Marilyn

• HP PAVILION DV9000 WITH VISTA 64. KEYBOARD AND MOUSE NO LONGER WORKS AND CANNOT FIND THE DRIVERS. ANY SUGGESTIONS

  HP PAVILION DV9000 WITH VISTA 64. KEYBOARD AND MOUSE FOR LAPTOP DOESN'T WORK ANYMORE AND CAN NOT FIND THE DRIVERS. ANY SUGGESTIONS OF HOW I CAN RESTORE THESE?

  I had the top plug a mouse and external keyboard to access my laptop that works.

  Hello

  ·        What is the specific name of the laptop?

  Check if an error code or error message is listed in the Device Manager.

  a. Click Start, type devmgmt.msc and press to enter.

  b. expand the device and double click on the sub element.

  Here is the link to the HP website to download the drivers for the keyboard and mouse, look for the specific model number and download the drivers for the same thing: http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&taskId=135&prodSeriesId=1842187&prodTypeId=321957

  You can uninstall the drivers for the keyboard and the touchpad and install the drivers from the link above or let the update of Windows install the drivers for the device:

  a. Click Start, type devmgmt.msc and press to enter.

  b. expand the device and right click on the sub element and click on uninstall.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Missing notification icon for wireless keyboard and mouse in the systray area.

  Missing notification icon for wireless keyboard and mouse in the systray area. Was working before the hard disk crash. Had to reload Windows Vista 64 bit OS. Have computer model gateway GT5678.

  Chances are good the software to include these icons in notification tray cam pre-installed on the bridge.  If you still all original gateway software, try to see if something in the menu start / all programs of the gateway seems as it can contain controls for these settings and run the program to check and see if it does.  If none of the gateway software help (assuming that all this is still installed) and re-installing the drivers did not work and there is no controls at the keyboard or the mouse, so I know what else to think.  These icons are not available with Vista - they were installed by a third-party device or software driver.

  I'm sorry that gateway could not help you.  They are those that you need to do to solve this problem, because it is something that they installed with the original computer which is not re-installled after you change hard drives.  They should know what software for it and power point yoo to a download site, or you send a disk with this software.  We can't really do anything else to help you.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Need replacement for HP Pavilion 23 wireless keyboard and mouse

  I accidentally bent the USB transmitter for my Pavilion All In One irreparably, and so I am looking to buy a new transmitter of keyboard/mouse/USB to my computer. I'm looking online, but must use the wrong keywords because I can't seem to find any information on what game should I buy for my computer again.

  Can someone tell me please what set of keyboard should I buy? Thanks in advance.

  CCM

  CCMilesWA, welcome to the forum.

  Here is a page with different sets of keyboard and mouse wireless that should work with your computer.  You can watch to see that one you like and go to the HP store for more information.  Make sure that it is compatible with your operating system.

  Please, click on "Thumbs Up +" if I helped you and click "Accept as Solution" If your problem is resolved.

• Reinstalling the driver for keyboard and mouse

  Re: HP Envy 17 t-3000 CTO Notebook PC

  I want to reinstall the keyboard driver and mouse of origin. I have the original disks - how can I do?

  Thank you

  If you are talking only of keyboard and mouse, then it does not require additional installation such that the computer will be installed automatically. In addition, you can install this software:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-111895-1&cc=us&DLC=en&LC=en&OS=4132&product=5180698&sw_lang=

  ALSO

  Try to install HP Support Assistant that will automatically download and install updates/drivers:

  HPSA link:

  http://WWW8.HP.com/us/en/campaigns/hpsupportassistant/hpsupport.html

• Satellite L300 - no response keyboard and mouse after Windows 7 upgrade

  Hi all

  After a new Windows 7 Ultimate installed on my PSLB0E L300, I lost the use of the keyboard and mouse pads.

  I did the installation with a usb mouse, who also now works. I downloaded all the drivers connected to my machine using the virtual keyboard, rebooted after each installed drivre, still does not.
  I also updated the BIOS, 1.3-1.5, still does not

  The strange part is that I can't access BIOS with F2, or sequence of starting using F12 at startup, navigate through the BIOS, so the keyboard works, but no longer works when Windows 7 has started.

  I tried to put all the defaults in the BIOS, no change.

  Help! >.< going="" crazy="" over="">

  Hello

  Have you installed additional drivers or tools for these external devices? If so you should remove, just check the software list in Control Panel.

  Normally the touchpad can be turned on/off with the FN + F9 key combination.

  In addition, it would be interesting to know what is happening on the factory settings. I mean the operating system preinstalled by Toshiba.

• PS2 Keyboard and mouse hooked after XP SP3 installed

  Upgrade to SP3.  Keyboard works very well to get into the BIOS.  F8 works very well to get to choose the Safe Mode, and al. or not.  Once XP takes control, the keyboard and mouse are unresponsive.  Mouse move the pointer on the screen, the keyboard will not activate numlock or other keys LED.  Power - off only option.  Tried other keyboards and other mouse.  No go.

  Any ideas?  Perfect condition ' puter til SP3!

  I said nothing about "of special drivers', I suggested seeking & install the updated drivers. If none is available, there is a very good chance that your older equipment of keyboard and mouse is not supported in WinXP SP3.

  Free installation and unlimited compatibility support for WinXP SP3 is available since April 14, 2008 to May 2009. This support will cost U.S.$ 59 or by higher incident now.

  OT: Unlike focus groups, we can't crosspost in these forums, we can only multipost.

  Multiposting vs Crossposting
  http://www.blakjak.demon.co.UK/mul_crss.htm

  Despite what you see in this forum URL or at the top of the forum page, Windows Update forum is not a forum specific to Vista or Win7. We deal here with WinXP, Vista & Win7. [What were thinking?]

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Pavilion dv4-1431us: hp pavilion keyboard and mouse

  I'm trying to update my laptop after not having used it a while - my daughter has used only listen to Spotify. Windows 10 previously installed.

  The keyboard and mouse on this laptop have stopped working. I used a wireless keyboard and a mouse who worked briefly - just long enough to troublshoot my material in the hope that it would be useful to fix the keyboard and the mouse. A number of unidentified devices had apparently been disabled, so I clicked on 'fix' for each one as it worked through the process.

  After that diagnosis was finished, I rebooted, and now even not my keyboard and wireless mouse are working. I have no way to get this put laptop updated with drivers, etc.

  I pressed "esc" when the laptop is coming, but I don't see anything that would allow me to solve this problem. I'm not a computer repairman.

  Help, please! Thank you.

  1CSmyers

  Sorry to be the bearer of bad news, but these older computers laptops fare not good when the upgrade to Win10.  Win10 really bad upgrade assessment tool assess the material limitations on these old PC, and as was the case with your upgrade, you only find that things do not work AFTER the upgrade.

  To make things even worse, unfortunately, the GoBack Win10 function is know unreliable and when it fails it can leave machines in a damaged condition.

  The Win10 upgrade is known, in some cases, corrupt the partition of recovery that are stored by the OEM that built the original machine.  It's pretty much guarantee that no HP recovery will work.

  I personally upgraded a few 'old' Win10 and in all cases, machines have restored their return to Win7.  Flaky, again coupled system FORCE Win10 performance updates from MS and other things all of a sudden then don't work DO NOT - all these were too much for people using the PC.

  So, I used HP recovery media to restore their former SES - where EVERYTHING WORKED!

  That's what I recommend you do with the DV4 - consider using HP recovery media.  It is a DVD and CD set that will erase the hard drive (removing all data, applications and settings, reinstall the original OS, drivers and utilities for HP. In some cases, you will be able to order a USB instead of discs.  You must order at HP; they cannot be downloaded.

  You can look online for recovery from the paged media related: http://support.hp.com/us-en/drivers

  Once there, enter your product name or number. On your software page and download the drivers, select your operating system and version. Click on "Update".  If the HP recovery support is available for your computer, down near the bottom of the page, you will see an entry for the command Recovery Media-CD/DVD/USB. Click on the symbol '+' to expand this entty and click on order to press for more details.

  Or, if you prefer, you can do the same by contacting HP Customer Service:

  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1

  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html

  Note that if HP no longer provides a recovery media for your model, a few other sites, you can check are: http://www.computersurgeons.com/ and http://www.restoredisks.com/

  Don't forget to read through the material in the linked thread before attempting the recovery: http://support.hp.com/us-en/document/c00707939

  Good luck

  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!

  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Keyboard and mouse not recognized

  HP Pavilion P6620f Win 7 when I first starts the job of keyboard and mouse (for access to the bios, etc.), but as soon as Windows starts and my login screen the keyboard and the mouse do not work.  There is being able to go to both because they have lights lite on each.  I tried unplugging everything, including the power cord, and I removed the motherboard battery to try to reset it.  Nothing seems to work.

  Hello

  I want to say that you don't have to disconnect the keyboard and mouse USB while trying this process. Once you have removed the USB drivers, the computer would have to re - discover the keyboard and mouse as a new device that may have circumvented the problem. So I read your reply message and it seems that you are unable to use your mouse and keyboard in safe mode. This is due to a problem of driver at this point. So there are only a few options left at this point in time:

  1.) Perform a repair windows (not a reinstallation of the operating system), so that you can verify the integrity of your system drivers. At startup, you need to press F10, F11 or F12 to get into the system recovery.

  Repair automatic running of the recovery disk is easy. After your system starts on the recovery disk and you follow the troubleshooting | Path via the menu advanced options, you will see the screen shown in Figure Aadvanced. Among the tools available on the screen advanced options, you will see the auto repair.

  Figure a. Advanced screen, you will find four other tools that you can use to recover a damaged Windows System.

  When you select the automatic repair option, you will see the screen shown in Figure B.

  Figure B your first line of defense when it comes to recover a Windows 8 system is the automatic repair option.

  Once you launch the automatic repair, it will begin to diagnose the problem to start and you will see the screen shown in Figure C.

  Figure C in the first stage of its operation, the automatic repair will diagnose the problem.

  During this diagnostic phase, automatic repair will scan your system and analyze the different parameters of the configuration options and files system searching files corrupt or botched configuration settings. Specifically, automatic repair will look for the following issues:

  • Missing/corrupt/incompatible drivers
  • Missing/corrupted system files
  • Missing/corrupt boot configuration parameters
  • Corrupt registry settings
  • Metadata for corrupted disk (master boot record, boot sector or partition table)
  • Installation of the problematic update

  If it detects one of these types of problems, it will automatically attempt to correct them, as shown in Figure D.

  Figure D auto repair has a diagnosis of your problem starting, it will attempt to fix it.

  If the AutoFix can solve the problem, she will do without any intervention. It will then reboot the system and start normally.

  2.) backup your important data and restore complete system of the operating system.

  If you have any further questions please send me a message.

  >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

  > Please click on Bravo, if this information was helpful >

  >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>