PS2 Keyboard and mouse hooked after XP SP3 installed

Similar Questions

• macOS Sierra installed ok, but the keyboard and mouse freeze after a short use.  Does anyone else have this problem?

  I'm running a MBP 17 "(fin 2011) with CPU i7 2.5 GHz, 16 GB of RAM and an SSD 1 TB for storage."

  El Capitan has worked well and all updates have been applied.

  Sierra (production, not beta) installation went without a hitch.  However, after using Siri and some other applications (which I closed), I opened and used Pages (also just improved).

  After about 15 minutes, the bluetooth mouse has frozen, then froze the built-in trackpad and keyboard.

  I gave her a few minutes in the case where it is clear.  I have consulted the page document to my iPad and it updated on the MBP display.

  Finally he needed a hard reboot with the power button.

  I had to restart twice this way, but was running a different application when he stopped on occasion earlier.

  Anyone had this happen?

  Hello crashsite2,

  Thank you for reaching out to the Community Support from Apple. I know how it is important to maintain your Mac and run as expected and I want to help you get your keyboard and the mouse works again.

  Whenever we see the same behavior with freezing equipment it can help reset the management system (SCM) controller on your Mac.  The control help SMC and regular systems of different hardware and connection on your Mac. Take a look at the article below to know how to reset:

  Reset the management system (SCM) controller on your Mac.

  If the behaviour continues or if you encounter difficulties, the entire community is here to help.
  Best regards

• Win 7 failure update USB (keyboard and mouse fails after reboot)

  Hello

  I use a Z-220 workstation. Today (2 September) after the weekly MS updated some (mouse keyboard Plantronics headset) USB devices no longer works after the restart.

  So I use a gadget of mouse (very simple HP give) and the keyboard on the screen to access the workstation.

  Does anyone have an idea what the cause?

  Thank you!

  Peter

  It would seem then that some Windows Update screwed to the top of the application of Digital Signature.  I've seen Windows updates do something funny on some computers, but this is a first for me.  Microsoft updates have been buggy lately to not feel alone.

  You may need to use the F8 key until a new update of Windows solve the problem or Logitech Updater provides a new driver.

  I've attached Logitech tips for reference.

  http://Logitech-en-AMR.custhelp.com/app/answers/detail/A_ID/9084/~/my-MX-3200-keyboard-keys-are-not-responding

  If you wish you can query Logitech support if they know something.

  Unfortunately, that's the best I can do, but at least you have something.

• Why the green light on my magic keyboard and mouse flashes green when I turn on after replacing the batteries?

  Why the green light on my magic keyboard and mouse flashes green when I turn on after replacing batteries (and not connect to the computer; battery tested good tester)?

  Simply indicates that the devices are on.

  Barry

• wired keyboard and mouse not recognized after sleep

  TL; DR after waking from sleep, the wired Mac keyboard and mouse are unresponsive.

  I have a new Mac Mini.

  OS X El Capitan 10.11.2, 16 gb Core i7.

  I had a keyboard and a compatible bluetooth mouse, but I had the problem that after the Mini for sleep, the keyboard and the mouse were not detected.

  I bought an Apple mouse wired and wired keyboard.

  I have the same problem.  If I SLEEP the Mini, when I wake up it (short press on power) or the keyboard or the mouse are recognized.  It's like I have no connected.  If I disconnect it from the usb and the re - attach they are not always recognized.  I have to press power to force power off and restart and then my keyboard and mouse are recognized.

  Sometimes when pressing the power button to wake up from her sleep, I also get a "flickering" image monitor, which improves if I turn on and off to sleep a few times, or restart.

  It is very annoying, any ideas?

  Try turning off blue tooth - it seems to me the pop up screen searching for the mouse Bluetooth turn on the lock.

• Satellite L300 - no response keyboard and mouse after Windows 7 upgrade

  Hi all

  After a new Windows 7 Ultimate installed on my PSLB0E L300, I lost the use of the keyboard and mouse pads.

  I did the installation with a usb mouse, who also now works. I downloaded all the drivers connected to my machine using the virtual keyboard, rebooted after each installed drivre, still does not.
  I also updated the BIOS, 1.3-1.5, still does not

  The strange part is that I can't access BIOS with F2, or sequence of starting using F12 at startup, navigate through the BIOS, so the keyboard works, but no longer works when Windows 7 has started.

  I tried to put all the defaults in the BIOS, no change.

  Help! >.< going="" crazy="" over="">

  Hello

  Have you installed additional drivers or tools for these external devices? If so you should remove, just check the software list in Control Panel.

  Normally the touchpad can be turned on/off with the FN + F9 key combination.

  In addition, it would be interesting to know what is happening on the factory settings. I mean the operating system preinstalled by Toshiba.

• Windows XP screensaver no longer works after insalling wireless keyboard and mouse (2000)

  Original title: eve of screen Windows XP stopped working

  I just installed a Microsoft wireless keyboard and mouse (2000) and now my screensaver lights.

  Checked the setting in Control Panel and all looks good.

  Hi Rich 664,

  · What is the service pack installed on the computer?

  Check out the link that mentions on the same question below: the screen saver does not start after the installation of a wireless pointing device: http://support.microsoft.com/kb/913405

  With regard to:

  Samhrutha G S - Microsoft technical support.

• Keyboard and mouse did not work properly after the service pack 2 update

  key Board runs very slowly and mouse runs through the screen when it is used. Acer Aspire 5050-3371 came with Vista home

  Hello

  Do you use a touchpad or mouse wired / wireless?

  Your laptop is connected with laptop keyboard?

  I suggest you to check if the keyboard and mouse work will find in safe mode. Follow the steps that will help you perform the following checks:

  Method 1

  a. restart the computer.
  b. start typing the F8 key.
  c. you get early boot option window.

  For more information, see: the boot advanced (including safe mode) options

   

  After the entry into SafeMode Log in your user account and check if the keyboard and mouse are working.

  After you perform method 1 Troubleshooting and if you find the keyboard and the mouse does not work correctly then you can perform the following procedure.

  Method 2:

  You can also perform the clean boot and check if you are able to start successfully. Clean boot will start Windows Vista by using a minimal set of drivers and startup programs and helps eliminate conflicts of third party software.

  The following link has steps showing how to perform the clean boot: http://support.microsoft.com/kb/929135

  Note: Please make sure that the computer is configured to start as usual according to step 7 of the article: how to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7:http://support.microsoft.com/kb/929135.

  Hope the helps of information. Please post back and we do know.

• USB keyboard and mouse no longer work after motherboard change

  I recently changed my motherboard for an ASUS maximus VI Impact, keeping all the other components of the same with the hope of making a generation m - ITX. Now when I turn on the windows machine starts normally, but on the home screen when I type my password to connect, the keyboard and mouse seem to lose the power and stop working.

  I tried all USB ports and think its unlikely a hardware problem as the keyboard and mouse work in Bios menu. Also, I have messed around with heritage and setting USB in the Bios, nothing helps. I have a feeling that I have to install the new drivers of motherboard to enable USB support but I can't do that without logging, and the motherboard doesn't have a PS/2 port as well as rules using a PS/2 keyboard.

  After reading I think it might have something to do with the version of windows installed on the SSD, I'm using (this is a version for windows 7 Home premium 64-bit OEM) and different sources say that this can only be connected to a motherboard. Is it interesting to try to do a clean installation of windows or will it be a waste of time with my current version? My ideas, please help.

  Hello George,.

  Thanks for posting your query in Microsoft Community Forum.

  Before you start with the troubleshooting steps, please answer the following questions.

  1. What is the brand and model of the computer?
  2. How do you reinstall Windows on the new motherboard?
  3. Have you received the OEM (Original Equipment Manufacturer) installation DVD?

  The OEM of Windows version depends on the hardware ID. If you change the motherboard of the computer, hardware ID changes and you will not be able to install/work with the version of Windows OEM.

  I would recommend that you connect another keyboard and mouse to the computer and check if it works. If the game different from the mouse and keyboard does not work with the computer, you may want to consider reinstalling Windows. For more information on reinstalling Windows, you can ask the OEM.

  We know the result.

  Thank you.

• Need help to get my mouse recognized, all started after the installation of the center of the keyboard and mouse

  Original title: Microsoft mouse and keyboard Center

  Hello

  I'm sure this question has been asked and answered before.
  But I just bought a mouse Microsoft Sculpt comfort, downloaded and installed M and K Center. But it does not recognize my mouse, I plugged the mouse to my laptop until I downloaded M and K Center and it worked fine, but all I want to do is program the side button.
  I use a Lenovo ThinkPad X 61 with the latest drivers for Bluetooth and Win 7 Pro.
  Is there something I need to do to get my mouse to be recognized by the centre of keyboard and mouse?
  M

  Hi Matt,

  Please write to us.

  I recommend you to uninstall the drivers of mouse from the Device Manager, then use this link http://www.microsoft.com/hardware/en-us/p/sculpt-comfort-mouse#support to install the drivers. Please select the operating system and the correct version before installing.

  Same thing applies to the mouse and keyboard Centre has as well, use the same link to install the updated drivers after you uninstall from the control panel.

  Nice day!

• problems with keyboard and mouse across multiple pc / laptops after critical update

  After updating all my logitech wireless keyboards and mouse gaming 3 PCs and a laptop all running win 7 64 bit family premium stopped working well functioned up until today update tried the logitech forum, support and no help. Also my phone has not stopped ringing all night people I game with and built systems for so it looks like this isn't an isolated problem. It seems that the update has dropped to about 19-20:00 hours, 16/05/13 can help you I have tried everything I know (im a former engineer MCSE) so I went through all the likely problems and troubleshooting with no joy can you please help (before restore points bearing the update seems to work until windows re updated and then

  Thank you very much

  Anthony Richardson

  Hi Anthony,.

  1. What is the brand and model of the mouse?
  2. the updates from Microsoft are installed recently?

  Method 1: I suggest that you try the steps from the following link:

  Mouse, touchpad and keyboard with Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

  Method 2: I suggest restoring the system, then download and install the updates from the Download Center.

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  Keep us updated on the status of the issue.

• my pc by using the keyboard and mouse of windows7 freeze after 20 minutes of inactivity

  my pc by using the keyboard and mouse of windows7 freeze after 20 minutes of inactivity

  Hi paulbartolotta,

  Welcome to the Microsoft community. According to the description of the problem, the keyboard and the mouse gel. Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         What is the brand and model of the keyboard and mouse?

  I'll help you with this problem. I suggest you follow these methods.

  Method 1: Run the tool and troubleshooting hardware devices.

  Method 2: Try to use the mouse/keyboard to a different USB port and verify.

  Method 3: Try using the mouse/keyboard on a different computer.

  Method 4: Update the latest drivers/software for the mouse/keyboard.

  Updated a hardware driver that is not working properly

  I hope this helps. Let us know if you need help with windows.

• Keyboard and mouse either fail to start or stops working after a while.

  Original title: keyboard and mouse problem

  My keyboard and mouse either do not work at startup, stop working after awhile, sometimes after a few hours or sometimers causing me to push the button Reset to get out every 10 minutes is on the line of support from microsoft for two hours, cost me £65, but still not fixed

  Pentium I5 dual core 2 x 500 GB disks 5700 chart logitec gaming mouse and keyboard

  Hello

  Thanks for those tips, I've considered that everything that had happened in the last weeks and remembered that my mouse was the first to show signs of problems when the red light on the bottom went dark and brilliant then a few times.

  I swapped the front mouse with a type Wireless and it seems not however solve the problem since replacing it with a different mouse to lead the problem disappeared. In my view, that the old mouse has a hardware problem that shorted supplies USB causing both mouse and keyboard stop working.

  allowed for a few days, so I guess that was the problem.

  Thank you for your support

  Chris

• keyboard and mouse not working not properly after installing Windows 8.1

  I was forced to upgrade my computer to Windows 8.1. My keyboard worked fine until the system is restarted. Numbers on the keyboard stopped typing and letters were capitalized when the caps lock was turned off and the numbers at the top will only type the symbol above the numbers.

  I looked at this problem and it seems that I have to enter in the settings of the UEFI and disable the Intel XHCI mode. When I enter the settings of UEFI, I can't make any selection in the start menu. My keyboard and mouse stop working.

  Any suggestions?

  Thanks for posting a reply. Fortunately, I didn't have to try your solution because the computer solve itself.

• Microsoft USB wireless keyboard and mouse stopped working after I bought another identical to another laptop that is 2 meters from the hotel

  I bought another keyboard Microsoft Wireless Comfort Keyboard and Mouse 5000 for my partner as he just got a new laptop.  I liked my as the original and has therefore whoever we decided to buy exactly the same package.  The only problem is, as I plugged my partners, my mouse and keyboard do not work.  I've tried new batteries and I tried to use the usb, but nothing works and there is no reset button on the mouse or the keyboard (that I can see anyway).

  I'm desperate to get it working.  Any suggestions please?

  Thank you

  Hello

  See the keyboard or mouse manual to locate the reset button to zero, to assistance that may help you resolve this problem.

  If you are unable to locate the reset button then, I would say to contact hardware support team.
  http://www.Microsoft.com/hardware/en-us/support