HP SW830 DVD-RAM: play mini dvd

Similar Questions

• How to install and use a plug-and-play mini dvr/camera in windows xp?

  Forgive me, I have very little computer knowledge. I need step by step instructions on how to use a mini-dvr/camera "plug and play" in windows xp. How do I connect my dell d600 laptop? How to play what I recorded on it?  Thank you in advance for any help rendered.

  Hi, Fred Flintstone786,.

  ·         Have you tried to plug in the device?

  ·         The unit get recognized by the computer?

  Please see the following articles for more information on the Plug-and-Play devices:

  Overview of plug-and-Play

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/pnp_overview.mspx?mfr=true

   

  Installation overview of devices

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/hardware_installing_overview.mspx?mfr=true

   

  Get the Plug and Play device driver support

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/pnp_driver_support.mspx?mfr=true

   

  To reinstall a Plug-and-Play device

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/devmgr_reinstall_device.mspx?mfr=true

  Hope this information helps.

• PowerCLI Script required to identify all clusters in a data center and all hosts within each cluster and calculate it using cpu and ram, avg, min, and max.

  Hi all

  I'm new to powercli and try to create a script to list all clusters in a data center and all hosts in a cluster and calculate min, max and avg cpu usage and ram by the host and cluster. So far, I have tried the below but I can't publish the results of my script.

  $Function = @)
  ForEach ($DataCenter Get-Data Center)
  {
  ForEach ($cluster in ($DataCenter |)) Get - Cluster)) - need help to post the information here and confirm if this is correct or not.
  {
  ForEach ($hosts in ($cluster |)) Get - VMHost))
  {
  ForEach ($vms to ($hosts |)) Get - VM)) - do not know if I called you here functions properly
  {
  $allvms = @)
  $allhosts = @)
  $hosts = get-VMHost
  $vms = get - Vm

  {foreach ($vms in $hosts)
  $hoststat = "" | Select the host name, MemMax, MemAvg, MemMin, CPUMax, CPUAvg, CPUMin
  $hoststat. Host name = $vmHost.name
  
  $statcpu = get-Stat-entity ($vmHost) - start (get-date). AddDays(-30)-Finish (Get-Date) - MaxSamples 10000 - stat cpu.usage.average
  $statmem = get-Stat-entity ($vmHost) - start (get-date). AddDays(-30)-Finish (Get-Date) - MaxSamples 10000 - stat mem.usage.average

  $cpu = $statcpu | Measure-object-property value - average - Maximum - Minimum
  $mem = $statmem | Measure-object-property value - average - Maximum - Minimum
  
  $hoststat. CPUMax = $cpu. Maximum
  $hoststat. CPUAvg = $cpu. Average
  $hoststat. CPUMin = $cpu. Minimum
  $hoststat. MemMax = $mem. Maximum
  $hoststat. MemAvg = $mem. Average
  $hoststat. MemMin = $mem. Minimum
  $allhosts += $hoststat
  }
  }
  }
  }
  }

  $Function | Select the host name, MemMax, MemAvg, MemMin, CPUMax, CPUAvg, CPUMin | Export-Csv "c:\Function.csv" - noTypeInformation

  Any help on this is much appreciated.

  [Ordered] casting was introduced in v3 PowerShell.

  For PowerShell v2, you can use

  $vms = get - VM

  $stat = 'cpu.usage.average ','mem.usage.average '.

  $start = (get-Date). AddDays(-31)

  $report = get-Stat-entity $vms - start $start - Stat $stat - ErrorAction SilentlyContinue |

  Group-object - property {$_.} @entity.name} | %{

  $cpu = $_. Group | where {$_.} MetricId - eq "cpu.usage.average"} | Measure-object-property value - average - Maximum - Minimum

  $mem = $_. Group | where {$_.} MetricId - eq "mem.usage.average"} | Measure-object-property value - average - Maximum - Minimum

  New-object PSObject-property @ {}

  Datacenter = Get-Datacenter - VM $_. Group [0]. Entity | Select the name of ExpandProperty-

  Cluster Cluster Get - VM = $_. Group [0]. Entity | Select the name of ExpandProperty-

  VMHost = $_. Group [0]. Entity.Host.Name

  Name = $_. Group [0]. @entity.name

  CpuMin = $cpu. Minimum

  CpuAvg = $cpu. Average

  CpuMax = $cpu. Maximum

  MemMin = $mem. Minimum

  MemAvg = $mem. Average

  MemMax = $mem. Maximum

  }

  }

  $report | Sort-Object-property Datacenter, Cluster, VMHost name |

  Export Csv report.csv - NoTypeInformation - UseCulture

• Re: Equium A60: DVD drive is not recognized - error code 39

  Hello

  My Equium A60 works very well for 4 years now.
  Lately the DVD ramis playing about and finally today there disappear form the drive list altogether.
  I uninstall the drive and install it again, but there is no difference.

  Windows gives me this message:
  + Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) +.

  could someone help me please!

  Thank you

  This issue has been described a lot of time here in the forum:
  Please check these discussions:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=129807&

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=106314𙽊

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=107214𚋎

• Burning DVDs with Windows Media Center

  Why does take so long to burn a dvd of a movie that I recorded with Windows Media Center Vista?

  Is there another way to upload videos/movies recorded with Windows Media Center on a dvd?

  I have Windows Vista Ultimate 64.

  What determines how long it will take to burn the DVD?

  The following factors play a role in how long it will take to burn a DVD:

  • Available system resources on your computer. The speed of your computer processor, the amount of available disk space and amount of RAM play a role in determining how long it will take to encode the video and burn it to a DVD.

  • The speed of your DVD burner, as well as the type of recordable DVD media you are using. A faster DVD burner with faster recordable DVDs results in a decreased once burning, compared to burning a DVD with a DVD burner slower more slowly the recordable DVD.

  • The length of the video on the DVD. When you use Windows Media Center to create a DVD, all the video and audio must be converted to a file format audio and video that a DVD player can decode and play. Long videos take longer to burn.

    You can include digital images and music on the DVD when creating a slide show. Photos and music are encoded in the MPEG-2 and Dolby audio, Digital video format and consequently, they will increase the time it takes to create and burn slide show DVD.

  City of http://windows.microsoft.com/en-AU/windows-vista/Burn-a-CD-or-DVD-in-Windows-Media-Center-frequently-asked-questions

  Check out similar posts mentioned under "Related topics" to the right of this message.

  There are always third-party programs to watch, things like Nero or Roxio, but they are expensive, unless you get them delivered with a new DVD player.

  Free Windows CD DVD burning software download list
  http://www.techmixer.com/free-Windows-CD-DVD-burner-software-list-download/

• Don't play age of Empires 3 on the Satellite A200-1DN

  Hello
  I have a Satellite A200-1dn with 1.5 GB of ram and an intel gma 950 / 945gm express chipset family.
  The problem is that the age of empires 3 requires a minimum of 64 MB of video ram. Mine is 32 MB.
  I've heard from the dvmt (dynamic video memory technology) and I was wondering is anyone know how to change it to the max?
  I heard that you can change CMOS, anyone know how to acess cmos? My bios version is 1.30. max dvmt may go up to 224 MB of video ram, that would be great.

  Please answer soon, thx

  Hello

  Generally, a user must read the MANUAL before asking these questions. But while you already here I can tell you how to access:

  Press F2 right after the power of the machine (when you see the toshiba logo) whereas there should be the option you want / need.

  Did you already check if you have the latest version of the bios installed? It would be a good idea to do so:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Hope you can get more video ram, my friend :)

  Greetings

• Old mini mac as a media server?

  I have a MacMini 2.1 Intel Core 2 Duo, 1.83Ghx, 2 GB RAM Mac Mini that has only a DVI video port.  Currently, the mini does nothing and I would like to unload my primary iMac iTunes account and share the mini for different computers in the House and the current 1 (soon add another) Apple TV.  99% of my media is in iTunes.  I have a 2 GB external spare hard drive I can use on the MacMini for storage.

  A colleague suggested I use the mini as a server multimedia and mentioned 3 applications/tools - Synology Nas free and Plex.  I would like to hear suggestions on how best to continue this Mac Mini as a media server using an external drive.  Is the fastest way to transfer just my iTunes library current of my primary iMac on the external drive on the MacMini?  Currently, my main iMac is where I manage my iTunes account, synchronize devices, purchase new media, etc.  I'm afraid that if I have the unloading to the Mini, how can I manage my current workflow?

  Plex would be a good option

  Synology is a brand of SIN do not know if their flavor of linux might work on a mac mini

  I have one and use it with plex too

  also have plex on my iPad, iPhone, OS X, windows 10

• RAM compatible with my Dell Inspiron N4010

  So I've been checking around an upgrade of ram for mine and I was wondering if this model of kingston is compatible or not.

  KVR1333D3S9 / 4G 4 GB DDR3 PC3 - 10600 1333 MHZ SODIMM could someone please get back to me on this as soon as possible? Thank you very much!! : D

  Hi Kevinsiaw,

  Inspiron N4010 supports DDR3 1333 MHZ SODIMM. This computer can support a Minimum of 2 GB and up to 8 GB memory.

  The memory of which you speak KVR1333D3S9 / 4G 4 GB DDR3 PC3 - 10600 1333 MHZ SODIMM is the Inspiron N4010-compatible.

  

  Please let me know if you have any other questions.

• First Elements 11 - Renaissance of the PC or buy a new one?

  I am tutoring a gentleman on how to use first elements 11 for a major project which includes 6 minutes slideshow narrated and 1 and a half hours of video high-definition 1920 x 1080.

  It will come out his project on DVD, so I implemented a project of widescreen PAL 720 x 576. This will allow to zoom in the subjects and the interviewer for interest without losing quality.

  I do not have the specifications of the computer in front of me at the moment, but from memory, they are fairly close to the plug according to the http://www.adobe.com/au/products/premiere-elements/tech-specs.html and the operating system is Windows XP.

  It is on a very tight budget and the problem we have is that the preview is painfully trolling, jerky and even after an eternity made is still very inadequate. It is very difficult to get done editing.

  I can recommend that he buy a newer and more powerful computer, but I know that money is very tight right now.

  I'm just wondering, with all the experience you guys have, if you think he should get a satisfactory result on the machine there and it would be interesting my do a reinstall complete operating system and re - install only necessary programs on his machine.

  If the basic specifications are not good enough, then I'll recommend a new computer, but if not, if he should get a better experience, I will rebuild the current for a nominal cost.

  Would be very grateful for your opinions.

  PS: The computer is about 5 years old and did not have a lot of hard use, but also has never been properly maintained, and I know I can improve its performance, just a question of who will be sufficient for the first elements 11.

  I agree with Steve, it would be useful to know a little more about computer the gentleman.

  For editing AVCHD material, here's my "minimum specs.', for the computer:

  1. Intel i5 CPU (faster, better)
  2. OS Win7-64
  3. Installed RAM 8GB min.
  4. 2 physical 7200 RPM HDD (hard disk drives) - one for the OS and programs (can be smaller) and the media and projects (must be big enough)
  5. nVidia or AMD/ATI GPU w / 1 GB of VRAM (this recommendation is more for support for the pilot and also provide VRAM dedicated, so that the video card does not need to share the system installed RAM)

  While you can get with less, a computer of this type would allow more than an adequate return for editing.

  I also know that a "regular" here, John T. Smith, built a computer for his wife and managed to get the right computer at a value price. I hope he can also comment.

  Good luck

  Hunt

• How do I know when my graphics card must be upgraded on my mac

  After playing mine craft game on my Mac version 10.10.5 my Mac keeps freezing some mentioned it might be that my needs to date with a driver graphics card how do I detirmine if you need the driver for my graphics card and if so where can I download it and it is normally free thank you

  If the product worked before to ensure that the proponent supports your operating system, and that you run any Anti Virus, the management or the 'guard' software on your computer. If so uninstall it completely.

  If the problems persist drag your settings in the game. As lo-res that is Minecraft, it's actually a very complex program requiring the GPU, RAM and CPU to function effectively.

  Commonly Windows users for Mac users point to the sellers for GPU drivers as Windows GPU providers can develop their own drivers and Apple is more control is the following and almost always provide their drivers in the House, not a seller.

  To update the graphics drivers for Apple, computers are obtained through your Apple's OS X except the Mac Pro 5.1 (2010), Pro 4.1 (2009) Mac and Mac Pro 3.1 (2008) models using OS 10.10 AND using drivers Nvidia graphics processing unit (GPU). If you do NOT these particular Mac models, or that you do and for some reason you have AMD/ATI GPU these drivers are of no use to you and update your drivers that you need to update the OS for GPU updates additional if Apple actually update.

  http://www.nvidia.com/download/driverResults.aspx/78853/en-us

  You can check the AMD site to see if they have something similar to this on their Web site, although a search on the web.

  Minecraft CUDA are not used so the CUDA tools are of no use to you if you see whatever it is labelled CUDA.

  to determine your model mac go to the Apple Menu and select about this Mac...

  However where it is the driver if you have a partition Windows or Unix you can start to, you can run Minecraft in another operating system on your Mac and get the drivers on the developers site that will allow you to play the game outside of Mac OS X. drivers for Windows or UNIX will have no effect on the GPU when it works under OS X

• HP-Compaq DC7600: which OS is best for my dc7600?

  Hi you all!

  I have a dc7600 computer upgraded. Its specifications are the following: Pentium d 945 CPU (dual-core 3.4 Ghz, 4 MB cache), 4 * 1 GB DDR 800 MHz runnig RAM DDR2 dual channel 667 Mhz and CL 5-5-5 (I can not manually set ). The computer has a 256GB SSD and a 500 GB HARD drive. Both are SATA drives. And the VGA is a Radeon HD5450 1 GB low-profile GPU.

  I think I have almost maxed out this computer.

  My question is: what OS will be the pomp on this computer? (Windows 7 or Windows 8.1?)

  The computer is to browse the web, and play mini-games for Windows XP and Win 7 and sometimes using an application of office such as Word and excellent.

  Thanks for any answer!

  Cordially Billzzz!

  You are the very welcome.

• cannot start single beep heard

  computer feel about one inch of the plateau, now it won't start, single beep heard reinstalled memory, checked everything, nothing seems to be wrong, help its my daughters computer, she has the habit of stop asking to play mine help she is only 4

  Make and model of the computer?

  Could be hard drive, does not resemble the loose video.

• I can do a second partition without formatting drive c: on win98se

  Hello! I have a partition with windows 98se currently installed on it. Is there a utility diskpart for win98se? Or do I need to use a third-party software such as magical separation. I would like to make a second partition on the same physical drive without losing all my data and programs installed especially.

  The second hard drive for a clean install of windows xp, I would keep the fat32 for file system.

  Thank you

  Hello

  Download iso and burn to disc cd, GParted live cd link below, GParted works RAM need min 128 MB of ram installed.

  http://sourceforge.NET/projects/gparted/

  Back up important data and Win 98 Defrag, and then restart the computer and boot from a cd of GParted and reduce the hard disk partition and format in fat32 and then follow the info in my first post

  Slan go foill, Paul

• OpenManage statement of the CPUS 'Speed' vs speed of processor question

  Hello

  We have two identical (different config then RAM) installed PowerEdge R510 with Open Manage 7.3.0.   Both are duel Intel Xeon E5520 2.27 Ghz processors in them.

  When you look at the details of the processor to the OM, on a single server, the two processors show 1600 MHz under the 'speed '.   On the other server, it displays 'speed instant "at 2266 MHz. '.

  Can someone tell me why one server CPU not running at full speed (only 1600 MHz)?  The configuration of the RAM play in this?

  Thank you.

  FYI, I figured this out. It was in the power settings in the BIOS. It has been set to Custom > low energy consumption. Apparently, this requires to run at a slower speed of the processor. I changed the parameters 'Maximum Performance' and equipped with rear ramps to 2.27 Ghz.

• When I try to install any Adobe product on my mac, it is said: «installation failure, errors during installation»

  Hi guys, I have a problem: when I try to install any Adobe product on my mac (I'm a late 2014,8 GB ram mac mini with the latest version of el capitan, connected to a monitor Full hd) it begins to try to install it, then stops after half a second to 1% and says something like: "Installation failure, errors during the installation. , but without specifying any error determined. It also says something like: "summary mistakes could help find the problem; but when I click it, the browser page that opens it is white. I'm desperate guys! I'm afraid that I'll never be able to run adobe products, there is actually a person who can solve my problem? Thank you very much!

  Hello

  Please contact us at customer service , the technician will fix this for you.

  Kind regards

  Gary Singh