Drivers for HL - DT DVDRAM GSA-T20L

Similar Questions

• I need driver for HL-DT-ST-DVDRAM GSA-4120 b because when I reinstalled windows xp it says I HAV no audio device installed... .thank you

  problems with the model of the audio device does not say one with HL-DT-ST-DVDRAM GSA-4120 b

  that did not help... .i no he has a web site that I can down load the software I need for free because Ive had this problem until I saved quite simply never e-mail

• HL-DT-ST DVDRAM GSA - T40N ATA Device works like a CD player. It is supposed to be a DVD player?

  Hello

  First of all, I would like to thank you in advance for your help.

  I had the problem of my HL - DT - ST DVDRAM GSA - T40N ATA Device not reading anything into the drive and removed the filters. It is still not working properly, and it's the rare occasions when he did (after hitting enough lol) and I needed it to work again. I disabled the device and rebooted before her reactivation. Although it works now it has unfortunately fizzled. It is now only installed as a CD player and it used to be a DVD player. Before it stopped working TI played DVD 100% fine as well so it should be good.

  Here is some info on my laptop:
  Model: Acer Aspire 5920
  OS: Vista Edition Home Premium
  RAM: 3 GB

  If you are in need of any more information do not hesitate to ask!
  Thank you
  Jack

  Hello

  You have disk problem as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read).
  Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Several good info here:
  http://Club.cdfreaks.com/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  -----------------------------------------------------------------------

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  I hope this helps and happy holidays!
  Rob - bicycle - Mark Twain said it is good.

• Error on HL-DT-ST DVDRAM GSA - T20N ATA Device 10

  My CD/DVD is not present when I am exploring 'My Computer'.
  I can't read/play any cd/dvd.  In the 'control panel '.
  appears the device: HL-DT-ST DVDRAM GSA - T20N ATA Device
  with an exclamation point in a yellow triangle and a message 'Erreur10 '.

  Hello

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive

  
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Quit - hl dt st dvdram gsa-t50f CD player

  my cd/dvd has stopped working - hl dt st dvdram gsa-t50f - tried uninstalling and reinstalling, but it failed and gave me no error message.  When I try to disable or update the drivers, it acts like it worked, but the drive still does not work. Help!

  AREV-

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• where I Reinstall driver HL-DT-ST DVDRAM GSA-4120 b

  I uninstalled my driver but have no idea where to access a relocation-ideas?

  Hi tammysummers,

  Engraver of DVD LG HL-DT-ST DVDRAM GSA-4120 b you use?

  If you use an engraver of DVD LG HL-DT-ST DVDRAM GSA-4120 b, you can follow one of these steps.

  (a) If you received a CD of software from the manufacturer, you try to install the driver software from the CD.

  (b) you can also contact the manufacturer of the DVD burner drive for assistance.

  http://www.LG.com/global/support/index.jsp

  Hope the helps of information.

  Please post back and we do know.

• HL-DT-ST DVDRAM GSA - T40N ATA Device Driver is not recognized

  Hi, I have an Acer Aspire 5920 and the HL-DT-ST DVDRAM GSA-T40N ATA device driver is not recognized.  I've uninstalled and restarted, without success.  I don't want to pay for a product fix cela, but can't find anything that I have confidence on the net - can anyone help please?

  Hello

  Try this:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  See also: http://support.microsoft.com/kb/929461

• HL-DT-ST DVDRAM GSA - T10N ATA not working

  HL-DT-ST DVDRAM GSA - T10N ATA Windows cannot load the driver for this hardware device. The driver can be corupt or missing (Code39). When I check for solutions Windows says that the driver works fine and up to date. How can I get that back?

  Did you restart the computer after?

  In addition, were be UpperFilters or LowerFilters value in the registry key named?

• Windows 10 drivers for Mac

  Hello

  I have recently installed windows 8 via bootcamp, then updated to windows 8.1. Then I downloaded an iso 10 and updated Windows updated my 8.1 to 10. But now im having some driver problems. When I was using windows 8 and 8.1, I had no problem driver, but now I can't control my keyboard, the screen brightness or volume keys... Basically, all fn keys are out of wack. I tried to search on google to see if I can find the drivers I need, but all that says always use "Apple Software Update" tool in windows to get the drivers. I did, but he says that my machine is up to date. Can someone help me get the right drivers please and tell me how to install?

  I use a 2015 retina mac book pro 15 inches that uses the latest version of OS X and Windows 10 education.

  Thank you

  Please download BC6 drivers for Apple W10 using BC Assistant to a flashdrive uSB, as shown.

  

• 64 bit Windows7/8/8.1/10 USB drivers for Palm Desktop

  Thank you people much more to Aceeca.com (Palm OS Garnet NEW manufacturers), the USB drivers for Vista, Windows 7 and 8 Win 64 bit operating systems are available.  There are many users Palm Desktop 4.x strives also to the declaration.
  
  I have synced my TX my Vista64 laptop computer bits and Windows 8.1 HP spectrum X 2 hybrid successfully through my USB cable.
  
  The drivers are located here:
  
  Aceeca Driver Downloads

  (NOTE: as of today, 01/08/2016 Aceeca site to be down for 'construction'.)  Drivers can also be found here: http://www.palmdr.com/windows-7-64-bit-usb-drivers)

  Installation instructions for Windows 7 (from Aceeca) are included in the download.
  
  Basic instructions:
  
  1 download the drivers and extract them in the same folder.  Remember the folder that you extracted to.
  
  2. try to HotSync your device.  It will fail.
  
  3. open the Device Manager and look for the yellow Triangle next to the other "Acceca" or "'Palm device ' in the"Other devices"section."
  
  4. right click on the device and choose "Update driver software".
  
  5. choose "Browse my computer for software" and guide them to the folder that you extracted the drivers Aceeca.
  
  6 choose 'Next' in the driver and then file location window tell him 'Confidence always Aceeca Ltd. software', then click on the button "install".
  
  7. I received an error message (Vista64) who told me "the drivers have been installed, but the device could not be opened." I realized my TX had expired, and fell asleep.  I tried a HotSync and it worked!

  Good luck!

  NOTE: Palm Desktop 6.22 may only multimedia show and install.  Here's how to fix this:

  If Palm Desktop 6.2.2 shows only the media and installation, try this: right click on the shortcut for Palm Desktop, and then choose 'run as administrator '.  Other modules should appear.

  To Palm Desktop run as administrator every time in Windows 8 / 8.1:

  Close to Palm Desktop, if it is open.  (This is a very important thing to do when you use 6.2.2 - it has been known to lose data when a computer is shut down without closing the program!)

  Right click on the desktop icon of Palm in the metro screen, then choose "open file location".  You will now see the actual file for the shortcut.

  Right-click on the file "Palm Desktop" shortcut, then properties.  Now, choose the tab compatibility at the top.

  At the bottom of the Compatibility tab is a checkbox: "run this program as an administrator", click OK.

  Try to open the Palm Desktop, all parties must appear.  You can see a box opens when you close the program asking "did the program runs correctly.   I chose 'Yes', and it has been working fine since then!

  If you are using a much older PalmOS device and try using Palm Desktop 4.x, you will need this additional patch Pimlico Software:

  Palm HotSync configuration

  WyreNut

  Forum member bobboffin has added this message:
  
  "After you try your first HotSync and failing (as expected) you may be unable to find any trace of the device in Device Manager, making the next step very difficult. It is me, and after some research, I discovered the following trick that allows Device Manager to display hidden and devices not present.
  
  Open Notepad and paste the following two lines are:
  
  Set DEVMGR_SHOW_NONPRESENT_DEVICES = 1
  Start devmgmt.msc
  
  Save it as SetDev.bat in My Documents.
  
  Open My Documents in Windows Explorer and double-click SetDev.bat. Device Manager opens.
  
  On the view menu, select Show hidden devices.
  
  You can now see in the other position of the device with a yellow triangle against it.
  
  You can now proceed to install the drivers according to the instructions.
  
  Note that the driver supports most versions of Palm OS. "I actually use an Aceeca Meazura 1000 rugged PDA running OS 4.1 - bobboffin.
  
  I hope this helps!
  
  WyreNut

  pattirclark wrote:

  
  

  SUCCESS... After writing my last response indicating no connectivity, I tried a last time and success for the Palm Palm devices and synchronization with 64-bit Windows 8 71 22.  Thanks again to WyreNut for all the support that I know that this Forum is an advantage for those who have limited computer knowledge and detailed suggestions has worked perfectly...

  Thank you again...

  And thank you! pattirclark!  You are the first person to report success with drivers Aceeca and Windows 8!

• XP drivers for HP Pavilion Elite m9280.me desktop PC

  Hi, I'm looking drivers XP (downgrade) to HP Pavilion Elite m9280.me desktop PC.

  I can't find them on HP Web site, there is only the lightscribe software.

  Can someone write me a list of the devices (e.g. video: GeForce GT 130) or the site where I can the found? Thank you very much!!! Tangier

  Drivers for Windows XP:

  Intel G33 chipset (first installation and reboot) here

  Intel Matrix Storage Manager here

  Realtek HD Audio here (install it before graphics driver)

  Graphic Nvidia GT 130

  Use modded worm 185.85 Nvidia drivers.

  How to install under XP:

  Basically, it is a 3 step process:
  1. Download driver here, double click and select Extract.
  2. download modded INF here and replace the original INF in extracted folder.
  3 install and reboot.

  LAN Realtek RTL8111C here

  Lite - on Wireless LAN here

  .NET framework 1.1 (Install before HP multimedia keyboard)

  HP multimedia keyboard here

• 15AC184tu: windows drivers for hp15ac184tu 8

  my laptop model is 15ac184tu. I am currently using win 8. but I don't have the drivers for win 8. so can you help me solve this problem... As soon as possible.

  Hello:

  HP does not support this model for Windows 8, and there is no Windows 8 drivers for the wireless network adapter that your laptop from anywhere I have ever been.

  I recommend connect you via ethernet cable, do the updates required to get the free upgrade to W8.1 in the windows store, then you can use the W8.1 drivers and software of the 15 t-ac000, except the BIOS and firmware files.

  http://support.HP.com/us-en/drivers/selfservice/HP-15-ac000-notebook-PC-series/7771404/model/8381866

• HP 15-af158nm: Windows 7 drivers for HP 15-af158nm

  Hello!

  Just bought the HP 15-af158nm netobook and installed windows 7 (64-bit), but I couldn't access the internet, LAN or wirelles is USB not work porperly... Searched Hp's site and the internet for drivers but no use...

  Is could someone please tell me where can get the drivers for the following items:

  Ethernet controller
  
  PCI\VEN_10EC & DEV_8136 & SUBSYS_80CC103C & REV_07
  PCI\VEN_10EC & DEV_8136 & SUBSYS_80CC103C
  PCI\VEN_10EC & DEV_8136 & CC_020000
  PCI\VEN_10EC & DEV_8136 & CC_0200
  
  Network controller
  
  PCI\VEN_14E4 & DEV_4365 & SUBSYS_804A103C & REV_01
  PCI\VEN_14E4 & DEV_4365 & SUBSYS_804A103C
  PCI\VEN_14E4 & DEV_4365 & CC_028000
  PCI\VEN_14E4 & DEV_4365 & CC_0280
  
  PCI encryption/decryption controller
  
  PCI\VEN_1022 & DEV_1537 & SUBSYS_15371022 & REV_00
  PCI\VEN_1022 & DEV_1537 & SUBSYS_15371022
  PCI\VEN_1022 & DEV_1537 & CC_108000
  PCI\VEN_1022 & DEV_1537 & CC_1080
  
  SM Bus controller
  
  PCI\VEN_1022 & DEV_780B & SUBSYS_80CC103C & REV_42
  PCI\VEN_1022 & DEV_780B & SUBSYS_80CC103C
  PCI\VEN_1022 & DEV_780B & CC_0C0500
  PCI\VEN_1022 & DEV_780B & CC_0C05
  
  USB controller
  
  PCI\VEN_1022 & DEV_7814 & SUBSYS_80CC103C & REV_11
  PCI\VEN_1022 & DEV_7814 & SUBSYS_80CC103C
  PCI\VEN_1022 & DEV_7814 & CC_0C0330
  PCI\VEN_1022 & DEV_7814 & CC_0C03
  
  Unknown device
  
  ACPI\SMB0001
  * SMB0001
  
  Video controller
  PCI\VEN_1002 & DEV_6660 & SUBSYS_80CC103C & REV_83
  PCI\VEN_1002 & DEV_6660 & SUBSYS_80CC103C
  PCI\VEN_1002 & DEV_6660 & CC_038000
  PCI\VEN_1002 & DEV_6660 & CC_0380

  Thanks in advance.

  Concerning

  Hello:

  You need these drivers...

  Ethernet:

  This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

  File name: sp71268.exe

  Network controller:

  The package contains the Broadcom wireless LAN drivers and utility which are required to enable the LAN adapter wireless Broadcom integrated into laptops supported that run an operating system supported.

  File name: sp70888.exe

  PCI encryption/decryption controller: note... this driver must be manually installed.

  This package provides the PSP AMD driver for the supported models that are running a supported operating system.

  FTP://ftp.HP.com/pub/SoftPaq/sp68501-69000/sp68619.exe

  To install the driver manually, download and run the above driver.  Conclusion of any windows error.

  Go to Device Manager and click on the controller W/C PCI who need the driver.

  Click the driver tab.  Click on set to update driver.  Select her browse my computer for driver software option and navigate to the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp68619.

  Make sure that the include subfolders is selected and the driver should install.  Then restart the PC.

  SMBus controllers USB... and download and install the driver first on the list from the link below and restart the PC.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

  Unknown device:

  This package provides the driver that allows the Synaptics TouchPad in the notebook models that are running a supported operating system. The pilot turns the touchpad General (for example, double-click and scroll) feature and provides a user interface.

  File name: sp72664.exe

  Video controller:

  This package provides the AMD graphics driver high definition (HD) and Catalyst Control Center for models of laptop computers that are running an operating system supported. For laptops equipped with switchable graphics modes, this package contains the drivers for the two graphics (GPU). Switchable graphics allow users to switch between a graphical power mode (normally used under the power of the battery) and a mode of graphics performance. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  File name: sp71637.exe

• Video drivers for HP Pavilion 6700 Geforce 8400 gs

  I recently spent from Vista to XP on my laptop and now I have most of the drivers reloaded, I still can not find the drivers for my nVidia Gefore 8400 GS video card or my audio drivers.  I tried all the places I can think of as well as many hours trying all the drivers that are recommended for this problem.  Please help me.

  Well, after many hours of work on this computer, I think I've found which can cause a lot of problems crossing your operating system from Vista to XP and try to find your video and sound drivers.  Thus, in order to allow your drivers install on a computer that is come from the factory with Vista installed on it, you must download the program flash bios HP offering their topic Download Driver for XP for the laptop there.  After you properly flashed your bios without burning your northbridge in the meantime, you can install your video drivers.  But, still does not allow video drivers, at least for my computer which is a Pavilion 6700 on the nvidia site.  I found the applicable driver download for my computer to RadarSync. com, which is a nVidia 8400 m GS.  In addition, the same problem happened with my audio driver for my audio controller realtek alc268 HD, and I had to download this driver from a different 3rd party source who was techpowerup. com  I hope this helps those of you who may be trying to downgrade from vista to xp.  Be careful and good luck.

• HP pavilion 2289se g6: win7 64-bit drivers for hp pavilion g6-2289se

  Hello

  I bought the Hp laptop with the back. Please help me find the drivers for win7 professional 64-bit.

  Product name: HP Pavilion G6-2289se

  Product number: D3G91EA #ABV

  Serial number: (deleted content)

  Thank you

  Zdzislaw

  You are the very welcome, Zdzislaw:

  I would like to publish some of the links on the main engines and after their installation, see if you can get Web pages to work.

  Install them in the order I posted the and for the first 3, restart the PC after the installation of each of them.

  This package contains the driver and Intel Chipset Installation Utility for the notebook models and operating systems. This utility allows the operating system to show the correct name for the Intel hardware that is installed in the Microsoft Windows Device Manager.

  http://ftp.HP.com/pub/SoftPaq/sp61501-62000/sp61717.exe

  This package provides the driver that allows graphics Intel high definition (HD) in the notebook models that are running an operating system supported. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  http://ftp.HP.com/pub/SoftPaq/sp61501-62000/sp61718.exe

  This package contains the driver that allows Audio IDT high definition (HD) in the notebook models that are running a supported operating system.

  http://ftp.HP.com/pub/SoftPaq/sp61501-62000/sp61716.exe

  This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

  http://ftp.HP.com/pub/SoftPaq/sp61501-62000/sp61723.exe

  This package provides the driver for the Intel USB 3.0 controller host for the notebook models and operating systems. The driver allows USB 3.0 devices.

  http://ftp.HP.com/pub/SoftPaq/sp61501-62000/sp61721.exe

  This package provides the driver Intel Management Engine Interface (MEI) for the notebook models and operating systems. The Intel Management Engine Interface allows communication between the host operating system and the Intel Management Engine firmware.

  http://ftp.HP.com/pub/SoftPaq/sp61501-62000/sp61719.exe

  This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.

  http://ftp.HP.com/pub/SoftPaq/sp61501-62000/sp61722.exe

  This package provides the driver that allows the Synaptics TouchPad in the notebook models that are running a supported operating system. The pilot turns the touchpad General (for example, double-click and scroll) feature and provides a user interface.

  http://ftp.HP.com/pub/SoftPaq/sp61501-62000/sp61882.exe

  This package contains the CyberLink YouCam software for laptops models and operating systems. CyberLink YouCam is an application webcam that allows users to capture images and video from a web camera and apply visual effects for video and captured images.

  http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63287.exe

  Unfortunately, I don't know what model your laptop wireless network adapter is, so I can't post the link to this driver.

  If you know what model you have, please let me know.  Sometimes at the bottom of the laptop there is a FCC ID sticker  If your laptop is, one, please post the FCC ID listed on the sticker.