Drivers for the controller does not

Similar Questions

• windows XP F6 installation does not work - cannot install the drivers for the controller

  I want to install Windows XP, I press F6 toload the AHCI AMD drivers from a floppy disk, but the installation stops when loading. How F6 to stop and allow the loading of the drivers?

  You should be able to install the AHCI drivers and change the interface after Windows is installed.

  If you have not already installed Windows, leave the setting as native IDE and install it normally.

  If Windows is already installed or after you're done install, install appropriate drivers for your controller and then change the interface of AHCI.
  You may need the chipset drivers installed as well.

• Acer Aspire 5315 drivers for wireless network does not

  This unit had top win7 and everything worked well. I reloaded Vista back and updated, all the drivers have shown as installed except for the wireless network, so I downloaded all the drivers of 3 of the website of Acer wireless network. Only the Atheros installed but still does not work, for the Atheros device ID is:
  PCI\VEN_168C & DEV_001C & SUBSYS_04281468 & REV_01

  The wired network connection works fine, but with the wireless, the pc icon double in the tray system, but not with the 'flowers' shows as when I connect the wired ethernet cable. The difference between when win7 was on this unit is as well the wireless connection and the dvd that worked perfect but now after reloading Vista, the Wireless does not work and the dvd also does not show as well, I had to install codecs to show him all. It's not logical, why win7 would work to perfection and not the vista which was what this unit came with?

  It's ok, I found the driver here:

  https://www.Atheros.cz/Atheros-wireless-download.php?chipset=22&system=3

  Thanks for your help.

• G6-1c58dx lost the drivers for the controller, ethernet, network controller, pci device and sm bus controller

  My hard drive died so I replaced it with an SSD.  Re-installed windows 7 Home 64 and he see fine windows, however there no connection network or the internet.  I downloaded the drivers from HP for the 1c58dx, but they won't install it.  I need to find the drivers for the following items:

  Ethernet controller: PCI\VEN_10EC & DEV_8136 & SUBSYS_169B103C & REV_05\4 & 3055DD30 & 0 & 0020

  network controller: PCI\VEN_1814 & DEV_5390 & SUBSYS_1636103C & REV_00\4 & 341BB839 & 0 & 00A 9

  PCI device: PCI\VEN_10EC & DEV_5209 & SUBSYS_169B103C & REV_01\4 & 2A8AB03B & 0 & 00AA

  SM bus controller: PCI\VEN_1022 & DEV_780B & SUBSYS_169B103C & REV_13\3 & 2411E6FE & 1 & A0

  Thanks in advance for any direction provided.

  Hello:

  First install the AMD Chipset drivers and reboot.  You want the first file on the Web page.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

  Ethernet controller:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100084-1&cc=us&DLC=en&LC=en&OS=4063&product=5193779&sw_lang=

  network controller:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-111781-1&cc=us&DLC=en&LC=en&OS=4063&product=5193779&sw_lang=

  PCI device:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100083-1&cc=us&DLC=en&LC=en&OS=4063&product=5193779&sw_lang=

• a key for the table does not exist in the table

  Hi guys,.
  
  I imported several tables of physical layer in the administration tool. So, I want to do new foreign key between tables join in the physical schema.
  Required fields for posting a link between these tables are set up. When I press the ok button, an error message is displayed:
  "a key corresponding to the table does not exist in the table blablabla. You want to create a? »
  
  In fact, what is this error? I don't have all the idea about it. The number of the type of the fields is the same, the names are also the same. I think that he should not have problems to make the new foreign key. But why is it happening?
  
  Thank you

  Hello

  It is the primary key of the first table. You might not have set this column as the primary key of this table at the level of the db.

  Thank you
  Imtiaz.

• Need drivers for the controller ethernet and network on Tecra M2

  I formatted and reinstalled Xp Pro SP2 on my Tecra m2.
  I installed and found all other drivers, but can't seem to find the correct drivers for the network and ethernet devices controllers.

  I downloaded a few different drivers that are compliant with the Tecra M2 but still have yellow question marks.
  If someone could help it would be much appreciated
  Thank you

  Hello

  I guess you need a Wlan card and LAN driver card.
  I a little surprised at your comment, because the WLan and LAN drivers are available on the page of the Toshiba m driver.

  There are 2 Intel Lan and 4 Wlan drivers for different wireless cards. You must choose the right! ;)
  Check the bottom of the unit. There must be a label with a few s Lan and Wlan card information.
  Select the correct drivers and install it.

• HP Envy 15 153tx: Windows 10: buttons brightness and the controller does not

  Greetings,

  Last night I upgraded Windows 8.1 to Windows 10. Since the controller buttons and brightness and the option to choose the power settings in Windows 10 did not. Brightness worked well in point 8.1 of WIndows.

  I use HP Envy 15-153tx.

  Thank you.

  I've updated to the latest drivers provided by HP Support for Windows 10 and the problem disappeared. Now I can control the brightness of my rig.

  Chapter is closed.

• Work around for the Ical does not send do not issue invitations

  If I understand the problem, ical will not send an invitation email to someone it detects has an ical account. People don't know they have an invitation or they use Google or Outlook to their calendars. Despite everything, they just don't receive invitations to your meetings. For some reason, Apple does not change the rules.

  I was going to start using my Google Calendar and just invite myself, but I used my Gmail account as my ID for Apple. Ah, the tangled web we weave when we try to be cute with Apple products.

  In any case, I was wondering if anyone had a work around for this problem "iCal don't send invitations." I want just the people I work with in voluntary organizations to get an email with an invitation attached. Has anyone found a way around this? I'm about to go to Evite!

  Thank you

  You can invite people to events using their e-mail address or their name. To invite people by name, they must be in your Contacts application with an email address, or they must use the same service calendar CalDAV or Exchange as you (for example, your company's employees).

  Invite people using window addresses

  1. Choose window > presentation.
  2. Search people, then drag them to the event.

  Send an email or a message for guests

  1. Control-click on the event.
  2. Choose send all guests or Message all guests.

  Add guests to the Contacts

  1. Force or double-click on a click event.
  2. Hold the pointer over a guest, and then click the pop-up menu .
  3. Choose Add to Contacts.If you do not see Add to Contacts, but you do not show Contact card, the guest is already in Contacts.
  4. An apple article is here: Calendar (El Capitan): invite people to events

• New Mac, same disk external DRIVE for the library; does not see the files

  I reconnected my iTunes library from a disk external DRIVE to my new computer, but iTunes does not recognize my files of the ALAC instead, he goes to the cloud and plays music from Apple things. How can I listen to my files? All the files are there, the library is intact; I changed the path in iTunes. Without result. He always plays with the cloud.

  You do not change the path in iTunes.  Who does as it says which is tell iTunes where media files [new] store. You change the path you launch iTunes by holding down the option/alt key, while the application starts and then choose when prompted the iTunes Library.itl file in the iTunes folder you included if all goes well on the hard disk external.  If everything you have on the outside are media files, then you better head for your old computer fast and get the rest of the library there.  It's the rest of these files in the iTunes folder that make up the other half of the 'library' iTunes needs.

• Pavilion g6 do you 2101: function of locking for the touchpad does not work

  My laptop touch pad lock feature does not work now. Not even the orange light comes on. Please tell me the solution.

  I have tried fn + key lock, but still no solution.

  Hello @2101tu,.

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I understand that you have a problem with the TouchPad and wanted to help you!

  First of all, try to review the following document and let me know how it goes:

  HP laptops - use and configure the TouchPad (Windows 7 and Vista)

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• APEX 5 modal page: CSS for the layout does not work

  Hi experts,

  I have problem with CSS tag in the pages of the dialog box modal.

  If I use a few CSS changes for APEX DA label (for personal reasons), it works for a normal page.

  Example:

  standard page: label #P2_X_STATUS_LABEL {make-weight: 700}-works

  modal page: label #P3_X_STATUS_LABEL {make-weight: 700}-does not work

  
  

  I tried to change the style of firebug (color, background,...) for each element on a page modal. It does not work. Also with! important attribute. I checked the 'Get matching items' jQuery selector and it shows me the correct items.
  

  
  

  How is that possible?

  I upgraded from 4.2 and I need this feature (base), to the works. (for modal too)
  

  
  

  Concerning

  J
  

  It will help if you demonstrate your problem to apex.oracle.com.

  Please, create a workspace of comments and provide us with credentials in order to visualize and debug your question.

  Thank you

  Sunil Bhatia

• Download link for the CC does not

  I signed up for the Photoshop/Lightroom bundle today. Received confirmation from Adobe. Download link does not work.

  Trying to find how to download the software

  Hi Dennis and t welcome forum.

  Where you are up to?  You have installed the Desktop Application Manager?  And if so, where is the progress bar up to?   Only the forst half applies for download, so if there halfway and frozen, is the installation that is causing problems.

  What operating system do you use?

  Any other information and more in detail?  All this will help.

• Extended the controller does not

  Hello
  
  I extended the controller attempted to call a pl/sql package and tried to insert data into a custom table. I have attached the controller through customization at site level. and moved the .class file to $JAVA_TOP. The page shows no error. I added a field on a page and try to save the data in a custom field.
  When I try to save the page it shows me a message that have been saved successfully! but the data are not are filled with custom table.
  
  
  Code central:
  
  package oracle.apps.ar.creditmgt.application.webui;
  
  import java.sql.Connection;
  import java.sql.Types;
  Import oracle.apps.ar.creditmgt.application.webui.OCMAddFinDataCO;
  Import oracle.apps.fnd.common.VersionInfo;
  Import oracle.apps.fnd.framework.webui.OAControllerImpl;
  Import oracle.apps.fnd.framework.webui.OAPageContext;
  Import oracle.apps.fnd.framework.webui.beans.OAWebBean;
  Import oracle.apps.fnd.framework.OAApplicationModule;
  Import oracle.apps.fnd.framework.OAException;
  Import oracle.apps.fnd.framework.OAViewObject;
  Import oracle.apps.fnd.framework.webui.beans.layout.OAQueryBean;
  Import oracle.jbo.Row;
  Import oracle.jbo.domain.Number;
  Import oracle.jdbc.driver.OracleCallableStatement;
  Import oracle.sql.CHAR;
  
  SerializableAttribute public class MANOCMAddFinDataCO extends OCMAddFinDataCO {}
  public MANOCMAddFinDataCO() {}
  }
  
  ' public void processRequest (OAPageContext oapagecontext, OAWebBean oawebbean)
  {
  super.processRequest (oapagecontext, oawebbean);
  
  OAViewObject oaviewobject3 = (OAViewObject) oapagecontext.getApplicationModule (oawebbean) .findViewObject ("CaseFoldersVO");
  If (oaviewobject3! = null)
  {
  Line row5 = oaviewobject3.first ();
  If (row5! = null)
  {
  Number of pCaseFolderId = (Number) row5.getAttribute ("CaseFolderId");
  oapagecontext.putTransactionValue ("CasefolderID", pCaseFolderId);
  }
  }
  OAViewObject oaviewobject = (OAViewObject) oapagecontext.getApplicationModule (oawebbean) .findViewObject ("creditAppFinancialDataVO");
  If (oaviewobject! = null)
  {
  Row1 row = oaviewobject.first ();
  If (row1! = null) {}
  Number of pFinDataId = (Number) row1.getAttribute ("FinancialDataId");
  oapagecontext.putTransactionValue ("FinDataID", pFinDataId);
  }
  }
  }
  
  ' Public Sub processFormData (OAPageContext oapagecontext, OAWebBean oawebbean)
  {
  super.processFormData (oapagecontext, oawebbean);
  }
  
  
  ' Public Sub processFormRequest (pageContext OAPageContext, OAWebBean webBean)
  {
  super.processFormRequest (pageContext, webBean);
  OAApplicationModule am = pageContext.getApplicationModule (webBean);
  OAQueryBean queryBean = (OAQueryBean) webBean.findChildRecursive ("OCMBtnLayOutRN");
  
  Apply chain = queryBean.getGoButtonName ();
  
  If (pageContext.getParameter ("Apply")! = null)
  {
  Integer pcaseFolderId = (Integer) pageContext.getTransactionValue("CasefolderID");
  Integer pfinDataId = (Integer) pageContext.getTransactionValue("FinDataID");
  String pSubDebt = pageContext.getParameter ("SubordinatedDebt");
  
  Connection Conn = pageContext.getApplicationModule (webBean) .getOADBTransaction () .getJdbcConnection ();
  Try
  {
  OracleCallableStatement cs = (OracleCallableStatement) conn.prepareCall ("start OCM_FIN_DATA_PKG. Insert_Fin_Data (: 1,: 2: 3:4); end; ») ;
  
  cs.setInt (1, pfinDataId);
  cs.setInt (2, pcaseFolderId);
  cs.setString (3, pSubDebt);
  cs.registerOutParameter(4,Types.CHAR);
  
  DSI Execute();
  
  Output = cs.getCHAR CHAR (4);
  
  DSI Close();
  If (outP.equals('S'))
  {
  throw new OAException ("Success");
  }
  else {}
  throw new OAException ("Failed to Insert");
  }
  }
  catch (System.Exception Exception)
  {
  throw new OAException ("connection error");
  }
  }
  }
  }
  
  Package:
  
  CREATE OR REPLACE
  OCM_FIN_DATA_PKG PACKAGE BODY
  AS
  
  PROCEDURE Insert_Fin_Data
  (
  p_finacial_id NUMBER,
  p_casefolder_id NUMBER,
  p_SubDebt NUMBER,
  x_status OUT VARCHAR2)
  IS
  
  BEGIN
  FND_FILE. PUT_LINE (FND_FILE. JOURNAL,' before insert: ' | p_finacial_id |'; Casefolder id :'|| p_casefolder_id |'; Subordinate debt :'|| p_SubDebt);
  INSERT
  IN MAN_OCM_FIN_DATA
  (
  Financial_data_id,
  Casefolder_Id,
  Subordinated_Debt
  )
  VALUES
  (
  p_finacial_id,
  p_casefolder_id,
  p_SubDebt
  );
  commit;
  x_status: = s ';
  FND_FILE. PUT_LINE
  (
  FND_FILE. NEWSPAPER, "inserted successfully.
  )
  ;
  EXCEPTION
  WHEN NO_DATA_FOUND THEN
  x_status: = 'E ';
  NULL;
  FND_FILE. PUT_LINE
  (
  FND_FILE. NEWSPAPER, "no data for p_finacial_id = ' | ' p_finacial_id |'; Casefolder id :'|| p_casefolder_id |'; Subordinate debt :'|| p_SubDebt
  )
  ;
  WHILE OTHERS THEN
  x_status: = 'E ';
  FND_FILE. PUT_LINE
  (
  FND_FILE. JOURNAL,' error related to the p_SubDebt - ' | p_finacial_id |'; Casefolder id :'|| p_casefolder_id |'; Subordinate debt :'|| p_SubDebt | ' ERR'. SQLERRM
  )
  ;
  END Insert_Fin_Data;
  END MAN_OCM_FIN_DATA_PKG;
  /
  display errors;
  
  
  Please tell me if there is an error in what I did. Please tell me why the data are not met in the custom table!
  
  I tried to run an anonymous block, and he succeeded!
  
  DECLARE
  x_sts VARCHAR2 (1);
  a NUMBER: = 11111;
  b NUMBER: = 22222;
  c NUMBER: = 33333;
  BEGIN
  MAN_OCM_FIN_DATA_PKG.insert_fin_data (p_finacial_id = > a, p_casefolder_id = > b, p_SubDebt = > c, x_status = > x_sts);
  dbms_output.put_line ('Status :'|| x_sts);
  EXCEPTION
  WHILE OTHERS THEN
  dbms_output.put_line (SQLERRM);
  END;.
  
  
  Please advice on how to move forward. I'm not able to debug as I only download pages stocked in my jdevloper.
  Please help about this
  
  Thank you
  Prakash

  Prakash

  Send me your code will check and update.

  Thank you
  AJ

• Configuration of the workflow for the warehouse does not work

  Hello
  I m trying to create a workflow for a data warehouse, but for that I need to set it up.
  When you go to the Workflow Configuration Wizard, it does not work. any idea?

  Be a little more specific. What is the error you get?

• Qosmio G20 - Blue LED for the volume does not work on Windows 7

  Hello

  I have a minor problem. Yesterday, I update my Qosmio G20 on 2 GB of RAM and I have install Windows 7. Everything works fine even better than XP, but I notice that my blue led lights for volume no longer works.

  Is there a driver I need to install or any solution that these blue lights for the volume can function again?

  Hi Gabriel,

  I m not Qosmio G20 owner but I m asking you to install Windows 7. I think XP would be the best choice for this portable little plu

  Normally the lighting on Toshiba laptop to install the package of added value. It s is only not for this model, so I put t know if it will work. You should try to download from another model of laptop that is Windows 7 supported.

  In addition also check the BIOS if lighting is enabled.