Drivers of Windows XP SATA USB bootable does not configure z500

Similar Questions

• Dimension E521, windows resume loader, USB keyboard does not?

  I have a Dimension E521. When it starts up (windows 7 32 bit) happens to "resume the windows loader. I can't choose option I have a USB keyboard that does not start. Why is there no PS/2 port on the back of my office?

  Thank you
  Jill

  PS/2 ports have gone in the way of the dodo bird.

  Have you had a power failure or not stop correctly?

  Have you tried another USB port at the back of the Tower?

  Try to restart, and then press F2 before Windows starts to load to open the BIOS Setup. Search all the USB settings and make sure that they are all enabled. Save the changes before you exit the installer and see if you can deal with the problem of charger now.

  If this does not work, try this:

  1. If you can enter the BIOS setup by pressing F2, copy all the current BIOS settings
  2. Power off, unplug
  3. Power button press / hold for about 15 seconds
  4. Open the case and remove the motherboard battery
  5. Power button press / hold for about 30 seconds
  6. Replace the battery (use a new if it is old)
  7. Case of close and reboot and see if you can solve the problem of charger now

• Mr PRESIDENT, MY WINDOWS 7 32 BIT PC does not support to open 'Copy trans drivers install' to copy doc, to the iphone

  Mr PRESIDENT, MY WINDOWS 7-32 BIT PC does not support to open 'Copy trans drivers install' to copy doc, to the iphone

  Please help me solve this problem.

  Hello

  Thanks for posting the query on Microsoft Community. I'm happy to help you on this.

  I appreciate if you could answer a few questions to refine the question and provide you with better assistance.

  • Did you change the system before this problem?
  • Do you receive an error message when you try to open it?
  • Have you checked in uninstalling and reinstalling the application?

  If this isn't the case, I suggest you to uninstall the 'trans driver install' and reinstall it again and check if it helps.

  Meet us with information, so that we can better help you.

  Thank you.

• Audio Dany u 2000 usb tv does not not in windows 8?

  Audio Dany u 2000 usb tv does not not in windows 8?

  Read more: Dany u 2000 usb tv audio not working in windows 8? - Dany u-2000 usb tv works on windows 7 but when i install on windows 8 audio did not work. In tv software audio only detect microphone device.
  
   
  

  Azhar,

  Dany u 2000 tv usb does not appear on the Windows Compatibility Center and so I think that it is not compatible with Windows 8.

  It would be best to contact the Technical Support of Dany Technologies for assistance on this issue.

  The link is: http://www.danytech.com/presentation/viewcontent.aspx?Content_Id=5

• I have re-installed Windows XP. My wireless does not, any more than my ethernet connection. What should I do?

  I have re-installed Windows XP. My wireless does not, any more than my ethernet connection. What should I do?

  original title: why isn't my laptop recognize the eathernet link?

  Go to your computer manufacturer's support web site
  and search for the Windows XP drivers for your specific computer or motherboard model number.

  If there are Windows XP drivers, then download to a folder on your hard drive and burn it to a CD/DVD.
  Then, after installing XP install all device drivers, start by installing the card mother/chipset driver first,
  then the SATA, Audio, USB, LAN, etc, drivers.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  If you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the newer Windows XP drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  J W Stuart: http://www.pagestart.com

• NB200-12N - USB port does not work

  Hello

  I updgrade my OS from windows 7 starter edition to now a windows 7 home basic 32-bit usb port does not work is the (only) in the left near card reader sd and lan.
  Can you please hellp me to install it? I have download the drivers from Toshiba for my NB200
  But does not work.

  Thank you

  Paulo

  If everything is OK and right drivers all USB ports should work. You cannot install the drivers for each port separately and force one of them to work properly. On this machine, all three ports are the same USB2.0 ports.

  Try reinstalling the chipset utility.

  By the way: two other ports work well, right?

• Satellite L300 - Vista - Touchpad and USB mouse does not.

  Hello

  Well well after hours of trying allsorts, I post here...

  Been given the laptop for repair as the touchpad no longer. No problem "I thought", simply plug a mouse usb to help me get around and re - install the touchpad... what a joke.

  On the right, the USB mouse is recognized as a hid device and work, according to the Manager of devices, but not when you move it... nothing...
  The Touchpad is listed as a Synaptics ps/2 touchpad and signals a Code 10 in section mouse device as well as listed as a hid and fully functional usb mouse Manager.

  Right... I have...
  Listed all devices, even the hidden nonpresent (devmgr_show_nonpresent_devices) and removed everything only account of any mouse, keyboards, etc...
  uninstalled the software synaptics via the program Panel.
  Restarted the laptop, and it starts with the touchpad is ranked again code 10 with the version of windows drivers.
  Drivers up to date using two different files of Toshiba for the touchpad, still Code 10
  Still, the USB mouse does not either.

  Someone enlighten me please on a fix for this...

  Hello

  Really strange what s my friend because normally a touchpad driver update should solve the problem.

  In any case, have you ever tried to use the Toshiba Recovery disk? Maybe it s just a software problem and a few important Windows files are destroyed or don t work properly. Reinstall Windows using the recovery disk Toshiba takes only a few minutes and there are already all the drivers and tools integrated. With these parameters (factory settings), the touchpad should work properly, and if not the touchpad or the motherboard needs to be replaced maybe.

  Good bye

• USB keyboard does not work laptop computer whis Satellite A100-012

  I have install WinXPpro and my usb keyboard does not (id error 10). I have try 3 different usb keyboard. Other usb devices are working normally.
  Windows XP Home Edition reanimation keyboard drive works normally.
  I have install the chipset and latest bios drivers. What can I do to make my keyboard work in WinXPpro?

  Hello

  Don t know why the USB keyboard may not be recognized, but I recommend suite solution:

  1. click on start
  2. right click on my computer, click Properties
  3. click on the Hardware tab
  4. click on the Device Manager button.
  5 expand the Universal Serial Bus controllers section.
  6 right-click every device under the Bus USB controllers and click on uninstall to remove them one at a time.
  8 restart the computer and let the operating system reinstall the USB controllers.
  9. plug the removable USB storage device and perform a test to ensure that the problem should be solved.

  good luck buddy

• My WD 3 USB drive does not work in the 3 USB Ports on my Lenovo W530 lap. But work in the regular ports.

  My WD 3 USB drive does not work in the 3 USB Ports on my Lenovo W530 lap. But work in the regular ports. What can I do to fix this?

  Do not use windows update for drivers.

  Update your drivers Lenovo support and see if that helps

  If the lenovo is new, you can contact Lenovo support to asertain why usb3 ports apparently do not work

• Ethernet USB adapter does not work after update to sierra mac

  Ethernet USB adapter does not work after update to mac sierra.

  Please solve this problem as soon as POSSIBLE

  Hello guatamshah,

  If your USB to ethernet adapter does not work now that you have upgraded to Mac OS Sierra, there are a number of things we can try to get it working again.

  The first thing we want to do is to reset the SMC and the NVRAM on your Mac.
  Reset the management system (SCM) controller on your Mac.

  https://support.Apple.com/en-us/HT201295

  How to reset the NVRAM on your Mac.
  https://support.Apple.com/en-us/HT204063

  If the adapter is not still work after only two resets check to see if your Mac recognizes the device properly in the information system. In the Apple Menu, choose about this Mac, and then click the button 'system report... '. ». Once you have the window open system information, see the USB category on the left.
  OS X: about system information and System Profiler

  https://support.Apple.com/en-us/HT203001

  If she does not appear in the information system, see the articles below.
  macOS Sierra: If a USB device does not work

  https://support.Apple.com/kb/PH25343

  macOS Sierra: check your device's USB connection

  https://support.Apple.com/kb/PH25567

  However, if you do not see the device in system information, you may need to verify that network service appears correctly. In the Apple menu, choose system then Network preferences. You should see an entry similar to "Ethernet" on the left. If no, see the steps in the article below to add. Once add, test to see if your connection works with a disabled Wi - Fi connection.

  macOS Sierra: Add a network service
  https://support.Apple.com/kb/PH25279

  If it does not appear in the network, please let us know what you see on the right when you select the service, and the name of the service as it appears and we can go from there!

  Kind regards.

• S540 keyboard and the usb keyboard does not.

  Hello

  Suddenly, my keyboard doesn't work. Fn keys as reduce brightness works, but turn off the sound button doesn't work at all. In ubuntu, everything works fine and if I connect to my computer it works too, but if the computer connects to it stops working. In safe mode it does not as well. A usb keyboard does not work in windows as well.

  Does anyone have the same problem or solution?

  Yours sincerely,
  Joost

  Hello Martiniturbide,

  Just update Windows 10 built 10568 and it solved the problem somehow. Thanks for the reply. I hope that the problem is not well...

  Greetings,
  Joost

• All my work on usb processor does not open.

  USB

  All my work on usb processor does not open and the window instructions says it could have been changed or moved, but have not changed or moved files and folders become EmailXtender.  Please help find the files as important documents and letters are on usb.

  You must NEVER use Word to change the USB files as it is almost guaranteed to cause the corruption or loss of files.  Working on the files on a hard drive and then transfer it to USB.

• I have Windows XP Pro on my computer but have now tried to load Windows 8 but I need to remove it again to load Windows 7 Home because most does not

  I have Windows XP Pro on my computer tower but have now tried to load Windows 8 but I need to remove it again to load Windows 7 Home because most does not

  How to perform a new Installation of Windows 7:
  http://pcsupport.about.com/od/OperatingSystems/SS/Windows-7-clean-install-part-1.htm

  How to do a clean install with Windows 7:
  http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html

  Migration from XP to Windows 7 Easy Transfer and a USB key:
  http://www.howtogeek.com/HOWTO/3179/migrate-XP-to-Windows-7-with-easy-transfer-and-a-USB-drive/

  Windows Easy Transfer for transferring from Windows Vista or XP:
  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-easy-transfer

  If the family Windows 7 product key was already activated, you need to activate by phone. Both your XP COA / product key and Windows 7 very practical key product and then activate by phone following the steps below.

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  J W Stuart: http://www.pagestart.com

• I have an acer with SP3 and Windows XP machine. It does not recognize a DVD - RW in my TSST Corp. CD/DVGW TS - L632D

  Original title: DVD problems

  I have an acer with SP3 and Windows XP machine. It does not recognize a DVD - RW in my TSST Corp. CD/DVGW TS - L632D what is the solution. I tried the fix and I also used the Center 'Fix it '.

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?
  3 are. what patch you referring?
  4. this happens to you with some specific discs?

  Reinstall the drivers for DVD player and check.

  1. click on start > run
  2 type devmgmt.msc and press ENTER. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  3. in Device Manager, expand CD-ROM/DVD-ROM drives, right click on the device CD and DVD and then click on uninstall.
  4. When you are prompted to confirm that you want to remove the device, click OK.
  5 restart the computer.
  6. when the computer restarts, the drivers will be installed automatically.

• R500 + Dock + fingerprint USB keyboard does NOT work properly

  USB keyboard does NOT work before Windows logon. (Start-password to type with the laptop keyboard) Also the external keyboard fingerprint reader does never work in this configuration.

  (With my old Z60m, same keyboard and docking station even works well, except the startup password must be entered with the keyboard, the keyboard USB fingerprint reader does NOT work at this point.)

  R500 2732-6AG Vista Business

  Battery ThinkPad Advanced Mini Dock

  External USB keyboard with fingerprint 41A 5262

  Jochen

  New software of fingerprint for ThinkPad R400, R500, T400, T500, W500, W700, W700ds, X 200, X200s, X 200 Tablet, X 301 does not support the external fingerprint reader

  Click here to view the details of downloading new software.

  Click here to view the details of download for older software.

  On the software page oldest, you will notice that the keyboard agroenvironnemenaux USB and USB fingerprint reader.