DRM for export missing some tables

Similar Questions

• Only one Integrator for export csv to table and update the table?

  Hello
  I have a requirement where I need to create a single Integrator for export data in the CSV file into a custom oracle table and also use the same Integrator to download and update the custom table data. Is it possible to do this in a single Integrator.
  
  Thank you
  Kishore

  Yes you can do it.

  You must create a type of UPDATE metadata Integrator.

  First time:

  Custom table is empty.

  WEB ADI will download a blank Excel sheet. Copy the data from the CSV file and paste this Excel.Then download this file that will update the Integrator.

  A sample example is as follows:

  web_adi_pkg.main (param_1, param_2,... param_n)
  download_data;
  upload_data;

  Download data-> select query to download the data (select * from custom_table)
  Download the data-> insert into custom_table where NOT EXISTS (select 1 from custom_table where primary_key = primary_key_col_from_csv)
  update of custom_table where there are (select 1 from custom_table where primary_key = primary_key_col_from_csv)

  Please try above logic.

• Design of the attributes in DRM for an export of pivot in database tables

  Hi all

  I need help in the design of export and real estate in DRM configured with the database table.

  Consider a hierarchy has, with 10 Member L1, L2... L10 and each with some leaves (hierarchy level 3). Each Member has a different set of attributes / properties that are associated with, lets call P1A, P1B, P1C for Limb L1, P2A P2B for Limb L2 and so on. P1A property may or may not apply to any other Member, it may be unique to the L1. Each property / attribute has a value for this branch. The requirement now is to get the export table in the format below.

  Name of the node	Name of the parent	Attribute	Value of the attribute
  Leaf1	L1	P1A	some value
  Leaf1	L1	P1B	some value
  Leaf1	L1	P1C	Some value
  Leaf2	L1	P1A	a new value
  Leaf2	L1	P1B	a new value
  ...	...	....	...
  LeafX	L2	P2A	some value

  Basically, repeat the names of nodes according to the properties that are associated with him.

  
  

  One of the approaches I have however is to create 2 properties for each set of attribute associated with a member, which means create property called 'Attribute1' and ' attribute value 1 "for P1A which will allow me to select P1A to property 'Attribute1' and assign the value to the property «value of the attribute 1" for P1A.»» Like to create several properties of the attribute for P1B, P1C. Then for P2A, P2B P2C I can reuse attribut1, assign the value 1, 2 attribute, assign the value 2 and so on.

  
  

  But I'm not able to understand how to map attribute 1, 2 attribute, attribute 3 to the same column of the table "Attribute" and similar thing for 'value of the attribute.

  
  

  Sorry for the confusion long post. I hope I could clearly explain the requirement, but if I missed anything or anything confused sounds, pls let me know, I can help clarify.

  
  

  Any help seeing this through will be greatly appreciated.

  
  

  Thanks in advance

  Sam
  

  var prop_names ="";

  prop_names = String (node. PropValue ("Custom.PropNames"));

  var prop_str ="";

  prop_names = prop_names. Split(",");

  var prop_val ="";

  var val_final ="";

  var arr_itm ="";

  for (i = 0; i<>

  arr_itm = prop_names [i];

  prop_val = node. PropValue (arr_itm);

  prop_str = arr_itm. Replace(/custom./g,""); "

  {if(val_final=="")}

  val_final = prop_str. Concat(";",prop_val);

  }

  else {}

  val_final = val_final. Concat(",",prop_str,";",prop_val);

  }

  }

  Return val_final;

• DataPump to export some tables

  Hi all

  I would like to export some tables via datapump. For example, all the tables start with EMP, but not EMP_ADMIN. The following script does NOT work for me:

  expdp / SCHEMAS = MYSCHEMA INCLUDE = TABLE: 'LIKE 'EMP %' ' EXCLUDE = TABLE: 'LIKE '% EMP_ADMIN' ' DUMPFILE = dpump_dir1:exp_inc.dmp NOLOGFILE = y

  Any suggestion on how to use the name clause in the INCLUDE parameter?

  Thank you!

  Hello

  I've updated by blog post link above - I responded to your comment here.

  The problem is that you can't say

  Select x from y

  Union z

  you have to say

  Select x from y

  Union

  Select double z

  The additional table names must be selected from somewhere.

  See you soon,.

  Rich

• Satellite Pro L870 - missing some drivers for Win 7 - unknown device DEV_1E3A

  Just took delivery of some new L870 Pro of Satellite we have reinstalled Windows 7 but seem to be missing some drivers. I downloaded installed all the drivers available from the download site but we still have an unknown device.

  VEN_8086 & DEV_1E3A

  Looking around it can be an IMEI chip but I was not able to confirm the DEV ID of any of our sources generally. Does anyone have an idea what it is and where I could get the 64 bit Windows 7 drivers?

  Post edited by: Bashfuluk

  Hello

  Please check this HowTo.
  + How to identify an unknown device? +
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=78

  To my knowledge, the 8086 Dev_ID belongs to Intel
  So there must some Intel driver.

  Have you installed all the drivers for the Toshiba driver page? Do this

• 5.7 LR is no longer exporting files jpg (from RAW). No error message, just "finished work". No way around changing some options for export as the name of file, image size...

  Why is 5, 7 LR is no longer exporting ALL files jpg (from RAW)?

  No error message, just the usual "finished work" - but without actually writing a jpg file.  No way around changing some options for export as the name of file, image size...

  Hi antjeh37833361,

  Could you please export a Jpeg image and see if it exports.

  Also try to export the RAW image in Jpeg format on the desktop and then see if it exports.

  Please upgrade to the latest version 5.7.1 if Lightroom you are currently on 5.7

  Kind regards

  Tanuj

• is it possible to exclude some tables of data pump?

  Hello
  
  I want to exclude some tables while import/export to a single system using data pump. Is this all possible for this?
  
  If this isn't the case, please suggest me for all other ideas too.
  
  Iqbal

  Use the exclude parameter and check the link below.

  http://www.Oracle-base.com/articles/10G/Oracle-data-pump-10G.php

  Concerning
  Asif Kabir

• Satellite A200-1YW - missing some drivers Win 8

  Windows 8 Pro, Toshiba has 200 1YW

  After the installation of Windows 8 for some drivers do not work.

  Laptop does not read the SD card (are not) and is still missing some driver that I can't identify.

  Why Toshiba does not have an automatic "deskupdate" such as Fujitsu? A lot of problems would be solved.

  Obviously, each laptop manufacturer's own support system.
  In your case the problem is that your old laptop Satellite is not supported for Win8 OS.

  There is no problem with the supported models.

• Portege R100 - missing some drivers Ethernet Controller Win XP

  The hard drive failed on my Portege R100, so I replaced and installed Windows XP.
  The only problem is that I'm missing some drivers, so I can't get into the Internet - significantly Device Manager indicates problems with the Ethernet controller.

  Is there a place to get these missing drivers? I don't even know what to look for to resolve part Ethernet controller.

  Any help would be greatly appreciated.

  Thank you-

  George

  Hello

  Ethernet controller can be a LAN or WLan card.
  Have you installed the network card driver?

  All the drivers are located on the European driver Toshiba page:
  http://EU.computers.Toshiba-Europe.com

  Protected R100 is an older model mobile phone, so you will need to check the Archive.
  In product type to download the form, choose Archive instead of the laptop.

  See you soon

• The boot configuration data file is missing some information required. File:\BCD error code: 0xc0000034.

  I just bought my ASUS laptop (with no dvd player) 3 days ago. Today I turned on for the first time and was usually up to 1 hour later this bluescreen poped out: RECOVERY, your PC needs to be repaired. The boot configuration data file is missing some information required. File:\BCD error code: 0xc0000034. You will need to use the tools for restore on your installation media. If you don't have any media of the instalation (such as a disc or USB device), contact your system administrator or the PC manufacturer... As I said before that my laptop came with Windows 8, and it is not a dvd player.

  Thank you.

  Remove the power supply and remove the battery

  Press and hold the power button for 60 seconds

  Apply the AC voltage ONLY (DO NOT INSTALL THE BATTERY)

  Click on the power button and more quickly, press F9

  Follow the instructions to reset the computer to factory default

• Windows 8 will not mistake The Boot Configuration Data file is missing some required information.

  Yesterday, I downloaded Windows 8, and although using it was confusing I got the hang of it. Today, I used the computer again and everything was fine but then I stopped him and a few hours later, when I turned it on a blue screen appeared and he says:

  Recovery
  Your PC needs to be repaired
  The Boot Configuration data file is missing some information required.
  Leader: \Boot\0xc000000d
  OT: After victory. Download 8 it won't launch
  I have no idea what is happening or how to fix it. Any help to help me understand and solve this problem would be appreciated.

  Met the same question from one day to the other - re install Win 8< week="" old="" decided="" to="" misbehave="" on="" a="" reboot.="" nothing="" untoward="">

  In any case discovered that the automatic startup repair is less useless for me. He could not fix anything whatsoever after the diagnosis and just gave up.

  However, resort to repair (start your windows installation CD) command line prompt, I managed to solve it with the command of the ffg on the command line.

  Bootrec /rebuildbcd

  More info about bootrec available using your favorite search engine.

  for example, this site was useful for me

  http://superuser.com/questions/451277/missing-boot-files-in-Windows-8

  For users in previous posts with problems and have only a version downloaded to Win 8 - well I'd say that you yourself create a DVD of the version uploaded to win 8 - the installation program ask you if you want to create media - that will create a 4.x GB. ISO file that you can burn to DVD. There is enough information on how to do this just search online.

  With regard to creating a way to initiate Win8 installer from USB Eh well I heard the ffg tool works with Win 8 too but cannot vouch for her since have never tried so its at your own risk.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool?ClickID=ckqs4fqifskwfnxlpiwkzwxqwwwzlvvlezzk

  Good luck, have fun,

  See you soon

• "Boot Configuration data are missing some required information.

  Hi, my phone displays the message above on my toshiba L50b title.

  File: \BCD

  Error code 0 x 0000034

  I never received a recovery media device when I bought the computer laptop, is anyway for me to repair my laoptop to the internet?

  Thank you!

  Dot

  Hello

  Please follow the fix mentioned here, in accordance with your request, you must first create the system recovery disk:

  http://www.kapilarya.com/fix-the-boot-configuration-data-file-is-missing-some-required-information

  Hope this helps, good luck :)

• Why is - this 3 minutes 4K video 24 hours for export?

  I am a complete newbie to creation, so I'm still learning how do, but even though I know that 3 minutes 4K video should not take 24 hours to export.

  Here is some information on the situation:

  Export settings:

  Using the H.264 format with the YouTube 4 K preset.

  

  FX applied:

  Small exposure compensation, contrast, saturation, etc.

  Lumetri color to apply READ

  Denoiser II 200%

  Add an MP3 soundtrack

  Using an adjustment layer for the color adjustment and an another adjustment layer to create an effect of culture

  Added a few titles of text

  Slow motion of a clip to 20% of the speed

  Source of images:

  Slog2 XAVCS 60Mbps 4K video in .mp4 format

  Image size: 3840 x 2160

  Bitrate: kbps 56722

  Rate: 24 p

  Specifications of the PC:

  i5 - 4790K

  GPU Radeon HD 7950

  8 GB RAM DDR3

  Windows 10

  Power supply 600W

  Let me know if you need more information about my project and I would appreciate any guidance at all! I'm so completely new to this, so I will try to learn as much as I can.

  Hello noahthomas,

  But even though I know that 3 minutes video 4 K should not take 24 hours for export.

  He could.

  First of all, I just created a FAQ for those who have the same problem as you. Please read and see what you think: FAQ: how to speed up making, export or encoding?

  My assessment for why it might take a long time to export your short project:

  1. Material considerations
     1. CPU: encoding is a CPU-intensive process.
        1. Consider that your processor can be not powerful enough for the encoding of the 4K images at the rate you would expect.
        2. Think also that you don't have several processors, like many computers.
     2. GPU: the GPU can be used to speed up some processes for export.
        1. Consider that your GPU is unable to be activated.
           1. Since you have a GPU that can probably be activated for GPU acceleration, ensure that it is enabled in the settings of the project.
           2. If you use SOUL, make sure this option is enabled, as well.
     3. Hard drive: fast hard disks can help exporters faster.
        1. You use a separate hard drive?
        2. If so, it is internal or external?
        3. How this player is connected?
           1. The hard drive is connected via wired broadband or a slower?
  2. Media optimized
     1. Your support is optimized for coding?
  1. No current scaling: good. However, you encode to an enormous size. Take into consideration the size of the actual image that you encode.
  2. You encode the original camera film, so that the smart rendering process cannot be used to speed up the encoding process unless it was converted.
  3. You add Lumetri effects, which can represent time in the encoding process.
     1. Technique to avoid this problem: transcode original camera to intermediate codec while at the same time adding the Lumetri same effect via Media Encoder before editing it.
  4. You use the effects of the third party: some third-party effects are known to considerably increase export time. Any image as Neat or Denoiser II denoiser are particularly notorious for jacking up your time for export. It's probably the cause of your long time export.
     1. A good way around this time intensive process is to transcode the images to an intermediate codec with the denoiser plug-in for Adobe Media Encoder.
     2. In a process of one night or more, before you start same edition. The treatment of effects, you know that you will use to forward the unloading can save loads of time ultimately encoding.
• You use rendered intelligent?
  1. You do not use made smart, therefore, you cannot export the absolute quickest way that Premiere Pro is capable.
  2. You can use smart making encoding tasks in the future, however, a large part of the benefits of smart rendering cannot be used unless you allow for it in the preparatory stages of the project planning. Again, see the FAQ for more information on the smart rendering and how it can save you time while being a more reliable way to export at the same time.

Hope this helps you for your encoding job and future encodes. Please return to the questions.

Thank you

Kevin

• Export only some columns in export to excel instead of all?

  
  Hello world

  My version of Jdev is 11.1.2.3.0.
  I created a page in the ADF, in which I added an adf:table and a button to export to Excel.
  Added 'af:exportCollectionActionListener' to the export to excel button. Export works very well.

  But the client only needs a few columns in the exported file, means table has 24 columns, but when I click the button, it will show all
  24 columns in the Excel sheet to the place I need to export only some columns (specified) in the Excel worksheet.

  
  Note: Table shows all the columns (24), but when you export only some columns specified must be exported.

  How can I get this requirement?

  your suggestions will be really useful...

  Thank you.

  Hello

  I tested the use of prescription case. It works very well with the below code mode.

  It is very easy to achieve using

                 

                 

  Regardless of the column, you don't want to export, use attribute visible to handle those as below

  visible = "#{pageFlowScope.hideSomeColumns not 'true'} '"

• "PP can now take full advantage of the PC with several GPU cards for export substantially accelerated time"

  On the features page Adobe clearly shows:

  Export multiple GPU support

  Premiere Pro can now take full advantage of computers with multiple GPU cards for export substantially accelerated time. Rendering and compression just got a whole lot faster.
  
  

  Can someone PLEASE be very specific as to how it works with the new 2015 CC?  I just bought my 2nd GTX 970 and SLI it had.  Now I read a lot of conflicting testimony online and can't seem to get a straight answer.  Please don't refer either items that are either outdated or forums.  Adobe CC 2015 was just released there not too long ago, which is what this new feature.
  

  Is having two 970's beneficial for first use SLI and AE?  Can I use the SLI bridge or not?   Can I turn in NVIDIA SLI Control Panel?  Or did I frankly just lose $330?

  Any educated idea would be GREATLY appreciated to help relieve this anxiety.  Thank you...

  
  
  
  

  Eric Bowen of computers ADK is frequently here on this forum, and with Bill Gehrke, can give you the best technique advises compared to your current and future workflow exact. Change style and which codecs you use are very important.

  Given that you JUST improved don't panic... There are a few simple adjustments, you can do to get the most out of your current equipment.

  1. make sure your Samsung 850 pro has ONLY your operating system, programs and Windows swap file on it... nothing more. Turn off "Indexing" for all your disks in the system. You will need a separate and quick 'reader' for ALL your other files (images, previews, projects, export, media cache and cache files). The IDEAL reader for this is the new SSD Samsung SM951 PCI, which runs more than 1.5 GB/s.  The performance is going to be super fast. the use of this drive, but its capacity is LIMITED. You would then be advised to add drive hard level of large companies 'offload' all files to the guard. These recent hard drives crashed at 200 MB/s with a 128 MB cache on them and go up to at least 6 TB of size... they are not expensive.

  2. your CPU is designed to be overclocked... TAKE ADVANTAGE of that and try to get the highest stable frequency, you can with it, ensuring that you use a good cooling solution--probably water. Performance will get a significant boost of this MOST important factor.  Of course, your CPU has "only' '8 processors" with hyperthreading from the end superior Haswell E CPUs that can give you sixteen YEARS... but, SPEED of CPU CLOCK is KING and will affect your performance because MOST of the video are processed ONLY with the CPU. NVidia GPU support will BE GREATLY whenever SPECIFIC on your timeline functions are those which can be CUDA accelerated... i. e "scaling", "ultra key", "dissolves" and a host of effects and other features. When it is the GPU CAN speed up the heavy calendar saturated with CUDA effects by a factor of TEN TIMES when "made this preview," or, "exporting media" your CPU has a stock speed of 3.6 Ghz and will be turbo up to 3.8 on all 4 cores. MANY users are overclocking your processor to a stable 4.7 Ghz... Some are more than 5 GHz! You can see that an increase of a full Ghz would give you about 20-25% performance... it's a LOT!

  It has been said here on this forum that once the processor is more than 4 GHz, it's OK even to 4K.

  However, I've ALSO seen here, (Eric, I think), that certain types of 4K really needs to have a GPU that has a minimum of 4 GB of memory DDR5 video memory due to "frame problem", or "frame buffer".    Thus, a return of the 970 s and KEEP one, (if it has 4 GB of video memory or more). Use the return to SM 951 drive.

  3. make sure all your settings are properly defined. In Windows, power settings make sure that all settings are for OPTIMAL PERFORMANCE so that Windows reduce NOT anything automatically... I learned this lesson on my laptop... the DEFAULT settings have been throttling the CPU and the GPU all the time until I fixed it!

  Then, first, make sure that you have the correct settings to allocate the amount of memory for first use... Eric has said here, it should be at least 3 GB by thread (I think... it can called ' base'...) I forgot). In YOUR case it means assign 24 GB of system memory for first, (8 'threads' x 3 = 24 GB). The rest can be defined for use in 'other programmes' of course, you can experiment and increase the amount of 3.5 or another higher.

  4. do not panic... Bill and I have the same laptops Asus who two years now with the 765 m 2 GB NVidia GPU in them and the HQ of 4700 i7 CPU. We shitcanned included and 5400 RPM hard drive and we both installed two quality SATA III SSD in each of the two hard drive bays. We also each increased the memory of the laptop to 24 GB. Bill has already done a few projects 4K basic on his laptop and I have experimented with 4K on mine. On my laptop, basic editing is not a problem with 4K, but addition of video tracks and effects slowing it... However, the chronology which fixes not making it. YOUR machine correctly overclocked, with more memory than we and a SM 951 and a GPU 970 should do very WELL at the moment... I think.   Unless you want to spend 4 to 5 $000 on a new machine of Haswell E X 99!

  p.s. If you are working with 4K and 1080 p quality, you need a couple of good monitors. I recently bought TWO 27 inch Acer IPS monitors that are WQHD, or, 2560 x 1440 p in the resolution. They were rated very high in addition to a review and are IPS... the density of pixels is IDEAL... to 27 inches, 1440 p video looks LIKE 4 K!   The quality of the color and the image is amazing. My laptop powers BOTH monitors at full resolution! We use HDMI 1.4 and the other the 'mini displayport' 1.1 connection... (which is also called Thunderbolt version 1). This monitor is only $200 on the egg, (including a $50 discount). Others in this class are 6 to 7 cents.