Signal, but no receivers connected to cope.

Similar Questions

• WiFi signal but no internet connection

  I'm at a University in Tianjin, China and having a laptop with Windows 8 Ansus. I have a wifi router and a cable and had internet connection in this place in the past. I have reset the modem to create my network and password.

  I see my network identified by the computer but it says 'Limited', and there is no internet connection. I'm sure it's not not to do with the settings on my computer, and I had someone else to confirm. I have a connection when I go into a classroom and find their signal.

  What could cause the problem? How can you have a wifi signal but no internet? I invited people to ask the technicians at the school, but nothing has changed. Would it be a they forgot to press the button or something? There is no internet to the block of flats I live but the other parts of the school have.

  Just trying to understand.

  Stephen Hoare-Vance.

  Greetings

  The technician of the College gave us a different IP address for the connection. I guess that our block has a separate IP address of other blocks. Apparently the number after the third point is variable; a number any scope is ok. I couldn't communicate avec.115 but can avec.98

  I don't know why they changed, but the problem is solved, thank you.

  I also learned that when the router is enabled it will connect to the computer and display a signal, even if there is no connection to the internet.

• WRT54G good signal wireless but no internet connectivity.

  I have a WRT54G that has worked well for about a year. Last Sunday, I installed a couple of small updates from Microsoft on my main computer (cable via an ethernet cable from the router). At the same time, I installed service pack 3 on my girls (wireless) counter top.

  Since that time, on my three computers wireless I shows the strength of very good signal from the router but no internet connectivity. Internet works fine on the computer by cable.

  I have reset the router, no luck. Updated the firmware, no luck. Released and renewed until the cows came home and still no luck.

  I uninstalled the router of my main computer and reinstalled. During the installation it tells me that the router cannot find the internet even if the computer that works is connected through the router.

  I tried a different router (even part old version) which was a router to work when uninstalled about six months ago. I went through the installation process and it is the same, the router cannot find the internet.

  Is it possible to have two bad routers that the internet can pass through but the router cannot detect?

  At first I thought changing the setting of the Microsoft updates, but I restored my computer to a date before the updates and still have the same problem.

  Any help that anyone can give is most appreciated.

  Well there are some knows the problem with Service Pack 3 from Microsoft with wireless connectivity. You can uninstall SP3 from your computer and it will not solve the problem.

• strong wifi signal, but cannot connect to the internet

  I have a strong wifi signal, but I can't connect to the internet continues the smartphone and smart tv... help! We pay high speed internet but can not use it.

  Thank you

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand that you have trouble connecting to the WiFi in Windows 7. We'll help you probably with the same.

  1. What happens while you are trying to connect to the internet with the Wi - Fi network?
  2. You are able to connect to internet while, you use a wired connection?

  You can try to follow the following suggestions to solve the problem.

  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  I suggest you to consult the help articles and check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Additional information:

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks (Also applies to Windows 7)

  Wireless network card: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

  I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.

• Wireless network connection is connected with the strong signal, but stops working at random times

  Original title: internet says is connected with the strong signal, but stops working at random times?

  Hello
  For the last few weeks, I had problems with my internet connection. Wireless connections say I am connected and have the strength of the excellent signal. I know that this is not an ISP problem because my other computer works fine. I will be reviewed fine and then all of a sudden, the site doesn't load any more, although I'm always connected to the internet. This happens on Firefox and Internet Explorer, this isn't a browser issue.

  I read other offered on the internet and tried all, but nothing has changed. I have checked proxies, disabled antivirus and installed new, checked firewall, ran a check for malware, etc..

  Any help will be much appreciated because it becomes very frustrating to have to keep reconnected my internet when he says he's working.

  Hello

  I suggest you follow the links below and check them with the question:

  Method 1:

  Step 1:

  Start your computer in safe mode with network and check the number: http://windows.microsoft.com/en-US/windows7/Advanced-startup-options-including-safe-mode

  Step 2:

  You need perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot State, you must follow the steps in the article mentioned below and check with the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 7 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

  Method 2:

  Uninstall and reinstall the NIC drivers and check with the question.

  a. click on Start menu, in the Search tab type devmgmt.msc and press ENTER.

  b. right click on network adapters, and then click on uninstall and restart the computer.

  c. after rebooting, install network cards and check with the question.

  For reference:

  How can I troubleshoot network card? :

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

  I hope this helps.

• I have a yellow symbol Sun on my strength signal, but any other indicator bars works very well.

  signal strength indicator

  I have a yellow symbol Sun on my strength signal, but any other indicator bars works very well

  I am connected to my network, but still get the symbol as I said everything works fine

  Yes, but you have said that everything was  Come on, one could easily assume you meant everything but a connection to a wireless access point.  Never, you said that you were using a wireless connection, so that would not naturally be taken as part of anything else seen the way you described the problem.  * smile *.
  If it is purely aesthetic, you have two choices...
  (1) leave that would be.  To try to correct the cosmetic would actually damage something.
  (2) get the latest and the greatest drivers and full software for your network hardware manually by visiting the individual web pages for manufacturers and selecting the proper drivers, based on the model and operating system.  Uninstall all network components.  Restart so they reinstall.  Then, install the latest version that you downloaded.  Clear all memory networks and reconnect.  If this fails, consider using SFC/scannow.
  The second may or may not fix the problem.  The first works as it does now.  :-)

• Im having truoble internet connection, even if I have a signal and everything is connected

  Im having truoble internet connection, even if I have a signal and everything is connected.  I ran the repairs and doing what he had asked, however I am still unable to connect to the internet?

  I have a WiFi router, and even if my desktop pc lacks a coneection wirless, I bought a wireless adapter for it, so I can connect to the internet, but there is a problem with the connection.  everything worked fine and then it just stopped and refuses to connect. I run the diagnostic report and followed the instructions but it does not connect truncated.  What can I gdo now?

  Hello

  1. you get any error message?

  2. don't you make changes to the computer before the show?

  Please follow the steps below.

  Method 1:

  Follow the steps mentioned in the links below

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks (Also applies to Windows 7)

  Method 2:

  Follow the steps mentioned in the link below.

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

• Devices bluetooth audio seen paired, but does not connect unless that selected

  iPhone running 9.3.3

  Question is that devices audio bluetooth paired when turned on bluetooth settings will appear on the page, but they do not send audio to them automatically. They are listed under "My devices" but show "not connected". I can select the device in the menu settings and plays sounds as soon as I touch the name of the speaker, but not until I do. Same problem in the car too. Appears on the right, but shows not connected until I have the touch.

  I didn't open the bluetooth settings to on any prior iPhone iOS just selected a camera already attached before. I deleted and repaired, switched bluetooth, reboot the phone, soft reset the phone and even a network reset.

  Thank you.

  Try control centre. Swipe up from the Home button

  

  This screenshot of my iPad, it's the same on iPhone

• Update iPhone 4s to 9.2.1 says: impossible to verify the update you are no longer connected to the internet. but I am connected through wi - fi.

  Update iPhone 4s to 9.2.1 says: impossible to verify the update, you are no longer connected to the internet. But I am connected by wi - fi and I get an email on the phone. My existing operating system is 6.something.

  Go to settings > general > storage & use iCloud > manage storage (the first) > and if there is an update, delete it. Then go to settings > general > Software Update and try again.

  If that doesn't work, try updating through iTunes on your computer.

• When calling from my iphone, I get a busy signal, but it does not

  Iphone5S: when calling from my Iphone, they get a busy signal, but I do not use it.

  Is do not disturb on? (icon of Crescent Moon in the right line at the top)

• IPad used... software uppdate pop-up notification said - no 'connected to the internet' - but I am connected and works well.

  IPad 3 - software update notification.

  I try update - fails.

  tells me not connected to the internet. But I'm connected internet and works well. Made this for 2-3 days now.

  Please hold off on the update - there are problems with 9.3 known and she was withdrawn for many devices by Apple

  The 'list' of relevant articles that I know, they are now

  -You can read about the problems in the present statutes and possibly find workaround solutions, particularly in the last

  If you are unable to activate your iPhone, iPad or iPod touch after installing an update - Apple Support

  Apple iOS suspension 9.3 updates for older devices, work on activation fix | IVous

  Apple launches new version of iOS for iPad users 9.3 2 affected by bricking bug | 9to5Mac

  GSM of unfixed addresses Apple iPad 2 Bug with revised Activation iOS 9.3, but the larger question remains - Mac rumors

  If you are unable to activate your iPad 2 (GSM model) update to iOS 9.3 - Apple Support

  9.3 iOS update issues

  Leave a post by: ChitlinsCC

• NB100 - see network wireless, but unable to connect

  My girlfriend has removed the Atheros driver on his NB100. I just reinstalled the driver of this forum and the wireless icon is back in the lower right. I however still unable to connect to wireless internet and am use to operate the wireframe.
  Free configuration can see the wireless network but will not connect and windows said: there is none in the range.

  Help, please!

  Hi ig88uk,

  Please check the contents of the forum on the problems of WIFI. You will find hundreds of questions and I think that already is written here in the forum.

  I searched a little and founded this:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=49920&TSTART=50
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=51858&TSTART=0

• I deleted the majority of my photos from my phone but when I connect it to iTunes it always shows in the bar memory

  I deleted the majority of my photos from my phone, but when I connect it to iTunes it always shows in the bar of memory and it shows that I have no memory left

  You've synced the iPhone yet? It refreshes the data in iTunes.

  Furthermore, if you have configured to load music you deleted or the same photos of iTunes, iTunes will put this information on the iPhone when you synchronize.

  Try pressing sync and see if it changes at all.

• 21 Pro slate - Gets the IP address but no Internet connectivity

  Hi all

  I have a slate of 21 Pro with no internet connectivity at home.  The device gets an IP via DHCP on cable networks or wireless, but when you try to browse or access resources on the internet, it simply expires. I tried also to assigning a manual IP address without success. If I take the tablet in a café local wi - fi, it connects fine, but I can't make it work at home. My ISP is Baja broadband, a 50MB / 5MB cable connection LAN details below:

  * Arris T822G cable modem - no. ISP-condition, ability of routing and firewall, just a regular old modem

  * Cisco/Linksys E3000 router wifi - internal network gets NAT'ed here. not about filtering, fancy

  * Switch 24 port managed gigabit Netgear

  I tried bypassing the internal network and connect the slate 21 Pro directly to the modem Ethernet cable through cable. Same problem - it gets an IP (a public IP address in this case), but does not connect to all websites. HP sent me a replacement unit that shows exactly the same problem. Both units work very well at coffee wi-fi.

  (OS is Android 4.3 Jelly Bean. I could take the unit to the WiFi Café and see if there are updates available OTA if anyone thinks that might help).

  I am an engineer network with HER 25 years of experience. My home network is a mature network without problems. Connected to this network and works perfectly are: 2 iPhones, a Roku box, a smart LG TV, 2 Macs, Windows PCs 4. already had 2 HP Touch tablets, which were also very good. Home visits can connect their phones and tablets to our wi - fi without any problem. It's * just * slate 21 Pro, which is bad.

  I'm puzzled. Any ideas?

  Thank you
  Steve

  UPDATE: it's resolved. I found that I was able to gain access to Web sites by IP address, but no host name. There was something wonky with the DNS server provided by the ISP. Once I substituted another DNS server in the IP configuration, it works.

  Weird!

• IPhone unlocked 6 works on all carriers of the United Kingdom, but will not activate on mobile of delight that use EE network sim works in my 4S but 6 says not found carrier shows 3 bar on signal but will not activate the phone?

  uunlocked iphone6 works on all networks 4uk but does not work on mobile thegy delight use EE network it shows 3 bars of signal, but no name even sim card works fine in my 4S but bearer of 6 sows not found mobile delight just advise manual setting of the bu AFN will still not be enabled?

  any help appreciated MikeC

  Contact the carrier. In all cases the pleasure is not a carrier official iPhone.