WiFi signal but no internet connection

Similar Questions

• Excellent strengh of WiFi signal but no internet access

  I have a toshiba laptop with built-in adapter, adapter works fine with any other wireless networks that I connected without any problems at least 5 or 6.

  I have recently implemented a new network with new aol wireless router, a thompson speedtouch. The network is working properly and shows full signal strengh and connectivity, but I'm unable to access the internet.

  Other mobile home access the network perfectly, even if mine is the only laptop with Sp2! Is this a problem?
  I know very little technical jargon and saw hundreds of messages on google and this site, but none were of no help. I've done many things, but all seem to lead to ip/config - what happens with the error message - media disconnected and a timeout message and something about dhcp?

  Another path leads me to the "repair of the ' cannot complete this task and stop saying:"cannot renew ip address"." I downloaded the updates of microsoft for SP2, tried to update the driver for the card but tells me I have the latest firmware. Am completely stuck, reading around is not an uncommon problem, common but responses are not seeming to help me.

  Anyone with any help whatsoever would be amazing!

  Hello

  I also read on the net that sometimes if SP2 has been installed it of not possible to access the internet via WiFi network.
  AFAIK the SP2 installed and activated the firewall. Therefore, you should check if the firewall is disabled.
  In addition, the update of the driver may solve your problem.
  Check your WLan card driver version and if necessary, download and install a new one.

  The other possibility is that you have enabled filtering router's MAC address. Please check this box.

• Satellite P300 connected to the WiFi router, but no internet connection

  Help!

  I have a Satellite P300 installed with Windows Live Onecare... and a netgear Rangemax wireless router
  I have no idea as to overcome this problem... I just moved house and it worked just dandy in the old place

  Any suggestions would be greatly appreciated.

  Thank you

  Hello

  If everything worked correctly in your old House, then I guess there is no problem with the laptop but the router is simply not configured property or there is a problem with your ISP (internet service provider).

  Maybe you should get in contact with the ISP and need to check if the connection is ready and available!

  Welcome them

• strong wifi signal, but cannot connect to the internet

  I have a strong wifi signal, but I can't connect to the internet continues the smartphone and smart tv... help! We pay high speed internet but can not use it.

  Thank you

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand that you have trouble connecting to the WiFi in Windows 7. We'll help you probably with the same.

  1. What happens while you are trying to connect to the internet with the Wi - Fi network?
  2. You are able to connect to internet while, you use a wired connection?

  You can try to follow the following suggestions to solve the problem.

  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  I suggest you to consult the help articles and check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Additional information:

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks (Also applies to Windows 7)

  Wireless network card: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

  I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.

• WRT54G good signal wireless but no internet connectivity.

  I have a WRT54G that has worked well for about a year. Last Sunday, I installed a couple of small updates from Microsoft on my main computer (cable via an ethernet cable from the router). At the same time, I installed service pack 3 on my girls (wireless) counter top.

  Since that time, on my three computers wireless I shows the strength of very good signal from the router but no internet connectivity. Internet works fine on the computer by cable.

  I have reset the router, no luck. Updated the firmware, no luck. Released and renewed until the cows came home and still no luck.

  I uninstalled the router of my main computer and reinstalled. During the installation it tells me that the router cannot find the internet even if the computer that works is connected through the router.

  I tried a different router (even part old version) which was a router to work when uninstalled about six months ago. I went through the installation process and it is the same, the router cannot find the internet.

  Is it possible to have two bad routers that the internet can pass through but the router cannot detect?

  At first I thought changing the setting of the Microsoft updates, but I restored my computer to a date before the updates and still have the same problem.

  Any help that anyone can give is most appreciated.

  Well there are some knows the problem with Service Pack 3 from Microsoft with wireless connectivity. You can uninstall SP3 from your computer and it will not solve the problem.

• WIFI connects to the router but no internet connection on 15R 3521

  Hi, the new laptop 3521 with Win7 Pro the WLAN will connect to the selected wireless router but is unable to establish an internet connection.

  WLan Driver 1703 was duly installed once the Chipset driver was installed, as recommended.

  Fortunately, other mobile devices to connect to the same router. Ubuntu on this laptop was also happy to connect to internet on WIFI, only Win7 fails.

  Disabled the Win7 firewall, but no change. This connection, unidentified in the network and sharing Center.   Router SSID etc have been entered correctly. Remove the WLAN profile and not reinstated, no change.

  Tried to connect to another router wireless with the same result. I can only run this laptop on wired connection to the router.

  I am at a loss as to what other steps I could take to correct this key WLan / internet access.

  Any suggestions would be welcome. See you soon.

  Hi love,

  Thanks for your advice. I deleted the profiles (two identical found!), also removed all entries of all WiFi routers in Win 7 registry. This step has not resolved the problem.

  However, I found the reason for the connection problem and the solution is the following:

  In the wireless connected (TP-Link) router, wireless--> channel settings is set to 'AUTO' (which is to select automatically 20 MHz or 40 MHz).

  In the device driver Dell WLAN 1703 (properties--> advanced--> bandwidth 802.11 n, the value has been set on (ie the Atheros is the default!))  "20 MHz.

  Once I put the option value "20 MHz / 40 MHz Auto", the connection comes to life.

  What a relief!

  The question is now completely resolved. Thank you to all who have contributed.

  Better with respect to Dzsino.

• My IPad is connected to the WiFi router but will not connect to internet. My Internet works on my IPhone and Mac Book

  Since last night, my IPad connecting to my WiFi router, does not connect to the internet.

  Internet connection works for my IPhone and MacBook.

  Hello

  Go to settings resets the network settings on iPad.

  After reset, enter your key wireless router.

  See you soon

  Brian

• 21 Pro slate - Gets the IP address but no Internet connectivity

  Hi all

  I have a slate of 21 Pro with no internet connectivity at home.  The device gets an IP via DHCP on cable networks or wireless, but when you try to browse or access resources on the internet, it simply expires. I tried also to assigning a manual IP address without success. If I take the tablet in a café local wi - fi, it connects fine, but I can't make it work at home. My ISP is Baja broadband, a 50MB / 5MB cable connection LAN details below:

  * Arris T822G cable modem - no. ISP-condition, ability of routing and firewall, just a regular old modem

  * Cisco/Linksys E3000 router wifi - internal network gets NAT'ed here. not about filtering, fancy

  * Switch 24 port managed gigabit Netgear

  I tried bypassing the internal network and connect the slate 21 Pro directly to the modem Ethernet cable through cable. Same problem - it gets an IP (a public IP address in this case), but does not connect to all websites. HP sent me a replacement unit that shows exactly the same problem. Both units work very well at coffee wi-fi.

  (OS is Android 4.3 Jelly Bean. I could take the unit to the WiFi Café and see if there are updates available OTA if anyone thinks that might help).

  I am an engineer network with HER 25 years of experience. My home network is a mature network without problems. Connected to this network and works perfectly are: 2 iPhones, a Roku box, a smart LG TV, 2 Macs, Windows PCs 4. already had 2 HP Touch tablets, which were also very good. Home visits can connect their phones and tablets to our wi - fi without any problem. It's * just * slate 21 Pro, which is bad.

  I'm puzzled. Any ideas?

  Thank you
  Steve

  UPDATE: it's resolved. I found that I was able to gain access to Web sites by IP address, but no host name. There was something wonky with the DNS server provided by the ISP. Once I substituted another DNS server in the IP configuration, it works.

  Weird!

• WRT1900AC shows connected to the laptop wireless, but 'NO internet Connection' triangle

  recently replaced EA3500 Cisco that quit smoking with WRT1900AC

  configured for the wired network OK

  will connect WIFI for android Tablet

  DOES not connect to win 7 PC... worked fine with the old router (2 years)

  reset the WRT1900AC to factory settings... allowed 2.4 and 5 ghz...

  PC sees the wireless network and connects with password, still "NO internet connection".

  any ideas?

  Thank you waltinbatonrouge

  Thanks a lot for taking the time to suggest a fix... But the WRT1900AC went back to Best Buy yesterday. Easy back, by the way.

  Oh just a parenthesis... the WRT1900ac has finally connected ok Cat5. The speakeasy speedtest showed on 100-105Mbps of download, the same as the old EA3500 seized croasse.

  So, instead, I found an EA3500 used in a store of the local computer. Reset default and he already had the latest firmware.

  The old router Cisco EA3500 used the very simple "Cisco Conect" utility.

  Forums directed me to a version EA3500 of the "Linksys WiFi Smart" utility, which was a painless and immediately picked up the wireless for laptop Toshiba.

  He ran the same features on the speedtest and connected 'excellent' on room android...

  Have a great week!

• Wireless internet is connected but no internet connection.

  I used Idea_gprs to the Internet on my mobile galaxy s2. But when I attached mobile with my laptop via wifi hotspot mobile it shows yellow mark means no internet connection. I also have the laptop computer on the same BSNL broadband connection. Connection high speed works fine but I cannot attach my laptop to the pc.

  Windows IP configuration
  Name of the host...: my PC
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.
  ... DNS suffix search list: local.lan
  Wireless network connection Wireless LAN adapter:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Qualcomm, Atheros AR9285 802.11b/g/n WiFi
  Adapter
  Physical address.... : 74-DE-2B-A8-21-77
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Ethernet connection to the Local network card:
  The connection-specific DNS suffix. : local.lan
  Description...: Realtek PCIe GBE Family Controller
  Physical address.... : E4-11-5B-F7-58-21
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::9c6f:c68b:7099:bf7% 11 (Preferred)
  IPv4 address: 192.168.1.2 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: Tuesday, November 27, 2012 23:03
  End of the lease...: Wednesday, November 28, 2012 11:03
  ... Default gateway. : fe80::225:5eff:fe61:97bc % 11
  192.168.1.1
  DHCP server...: 192.168.1.1.
  DNS servers...: 192.168.1.1.
  NetBIOS over TCP/IP...: enabled
  Tunnel adapter ISATAP.local.LAN:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. : local.lan
  ... Description: Microsoft ISATAP adapter
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Card adapt 6TO4 tunnel:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 card
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Card tunnel Teredo Tunneling Pseudo-Interface:
  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  IPv6 address...: d 2001:0:9 38: 6ab8:1842:579:3f57:fefd (preferred
  EXEs)
  Address IPv6 local link...: fe80::1842:579:3f57:fefd % 13 (Preferred)
  ... Default gateway. : ::
  NetBIOS over TCP/IP...: disabled
  Tunnel adapter isatap. {A6912753-123B-462F-A80B-6E43DFDCE741}:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Adapter Microsoft ISATAP #2
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Reusable Microsoft 6To4 tunnel map:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  Description...
  . : Microsoft 6to4 adapt #2
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Card tunnel Local Area Connection * 15:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 adapt #3
  Physical address.... : 00-00-00-00-00-00-00-E0
  Active DHCP...
  . : No.
  Autoconfiguration enabled...: Yes
  Card tunnel Local Area Connection * 16:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: #4 Microsoft 6to4 card
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Card tunnel Local Area Connection * 17:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: #5 Microsoft 6to4 card
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Card tunnel Local Area Connection * 18:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: #6 Microsoft 6to4 card
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  So my question is how I connect to the internet by using the galaxy s2 on my laptop.

  Hi Vinod,

  The question you posted would be better suited in the Sumsung Forums. I would recommend posting your query in the TechNet Forums.

  Sumsung Support Forum

   

  http://www.Samsung.com/Levant/consumer/mobile-phones/mobile-phones/smart-phones/gt-I9100LKADAM-supportforward

   

  http://www.Samsung.com/Levant/support/troubleshootingguides/supportTroubleShootingGuidesMain.do

  Hope this information helps.

• I can connect to the router but no internet connect windows 8

  I took each of boredom that my NEW HP envy provides however I still get a no internet connect error.  If I reset my router and checked that it is acceptable.  I can reset everything and internet will work for no more than 30 sec. I know that the internet is able to work as I plugged the ethernet cable, but I want it is wireless! What to do next! ?? !!

  Hello

  Check with HP Support, their online documentation and drivers, diagnostics,
  and ask questions in the forums about known problems.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ===============================================

  Note the use of Win Key + X and Win Key + W (to access control panel, run,
  and settings according to needs). Win + D key calls to the office and use
  Win Key activates / deactivates the desktop and start screen.

  --------------------------------------------------------------

  Control Panel - Network and sharing Center - solve problems

  References to Vista also apply to Windows 7 and Windows 8.
  
  Your router be guess here, you have successfully updated the firmware a possible
  solution? And I would update your WiFi drivers on computers. How far away are they
  you have set in the router? Are there obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click
  top - tab of the driver - write version - click on update driver (can't do
  nothing that MS is far behind the certification of drivers). Then right click on the Wifi
  Device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Microsoft - How can Windows 8 - I fix the network adapter problems? (Do not forget to see
  This section-> update the NIC driver).
  http://Windows.Microsoft.com/en-us/Windows-8/fix-network-adapter-problems

  Drivers and Microsoft - Windows 8 - Hardware
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Microsoft - Windows 8 - why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  Microsoft - Windows 8 - what happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system Maker you can see the same device manufacturer
  more recent versions. (Those become your fonts of rescue system manufacturer).

  Repeat for network (NIC) card and is a good time to get the other update
  Drivers Windows 8 like updated drivers.

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - set up a new connection or network

  -----------------------------------------------------

  And:

  TechingItEasy - how to join a Wi - Fi network in Windows 8 by MVP Andre Da Costa
  http://techingiteasy.WordPress.com/2012/06/09/how-to-join-a-Wi-Fi-network-in-Windows-8/

  Microsoft - Windows 8 - Web & Networking
  http://Windows.Microsoft.com/en-us/Windows/Web-networking-help#V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1&Web-networking-help=Windows-8

  Microsoft - Windows 8 - Wi - Fi & Networking
  http://Windows.Microsoft.com/en-us/Windows-8/WiFi-networking#1TC=T1

  -----------------------------------------------------

  Microsoft - Windows 7 - Why is my Internet connection so slow? (applies to Windows 8)
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow

  Microsoft - Windows 8 - wired and wireless in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Windows 7 Dell computer laptop connects to the router, but the internet connection is spotty/slow

  I recently installed a new Comcast wireless gateway, which includes a built-in router.  My Ipod and Ipad work perfectly with this new router connection.  My Dell laptop, however, connects to the router without a problem, but it surfing the internet very slowly and sometimes can't access it at all.  The router connection remains strong during these periods of power failure, however.  I don't get online no problem when I connect directly to the router/modem with an Ethernet cable.  Network troubleshooting does not detect a problem, I have released/updated my IP address, and made sure I had updated drivers.  The issue still [persists.  Any input on what to try next?

  Hello Scot,

  Thanks for posting your question in the Microsoft Community forums.

  The description of the problem, I see that the Internet connection is very slow on the computer.

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  Maybe there's a chance that some network settings, start services application or a third party or a security software restricted it to connect properly and is responsible for the internet connection is slow.

  I suggest you to follow the steps below and see if it helps.

  Method 1

  I suggest you try the procedure described in the following Microsoft Article and check if it helps.

  Internet Explorer is slow? 5 things to try
  http://Windows.Microsoft.com/en-us/Windows/help/Internet-Explorer/slow-five-tips-to-boost-performance

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Method 2

  If the problem persists, I suggest you to follow the steps described in the following Microsoft tutorial and see if it helps.

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Why is my Internet connection so slow?

  http://Windows.Microsoft.com/en-us/Windows/why-Internet-connection-slow#why-Internet-connection-slow=Windows-7

  Method 3

  If after performing more high question method persist, try to perform the clean boot and temporarily disable security software and then check the speed of the Internet.

  Step 1: Perform the clean boot

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135/en-us

  Note: See "How to reset the computer to start normally after a boot minimum troubleshooting" to reset the computer to start as usual after a repair.

  Step 2: Temporarily disable security software.

  Disable the antivirus 

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attack.

  Method 4

  Since then, the issue is not resolved by disabling the security software, Windows Firewall could be the next possibility. So, I suggest, temporarily, disable the Windows Firewall and check if the problem persists.

  Refer to the following steps:

  1. Press the Windows key + R, type firewall.cpl , and press ENTER.
  2. Click turn Windows Firewall on or off. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. Click turn off (not recommended) Windows Firewall under each network location that you want to stop trying to protect, and then click OK.

  Caution:

  You should not turn off Windows Firewall unless you have another firewall is enabled. Turning off Windows Firewall may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers. You must reactivate as soon as you have completed troubleshooting.

  For more details, you can see the article mentioned below.

  Enable or disable Windows Firewall

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Signal, but no receivers connected to cope.

  Signal QDeclarativeEngine::quit() emitted, but no receivers connected to handle it.
  

  I can't operate the simplest QML. Who is created by the wizzards QML for Blackberry and Desktop. The same unchanged examples work on Windows and Symbian. But I always get the message that precedes, when I deploy the application on the Playbook.

  Is there any sample specifically for Playbook you tested tutorials or work?

  Put this line in main.cpp, has done:

  QObject::connect((QObject*)view.engine(), SIGNAL(quit()), &a, SLOT(quit()));
  

  Is this a bug?

• Flashing led but no internet connection

  Hi I have a gs108 switch and I connected to my modem and my pc and it works fine, so my problem is that when I connect an ethernet cable from the switch to my TV or ps3 im unable to get internet connection on my TV has recommended that I use a proxy, then I may be able to have a connection that i havnt tried yet and the ps3 seems to not detect the ip address

  Hello Cai,

  Welcome to the community!

  You will probably need a router instead of a switch, a basic modem can only give a unique IP address. Because you used the PC, he's already got the IP address of the modem. Why the TV and the PS3 does not get an IP address is because the modem can provide only 1 (one). Use of the switches is to receive and send the traffic, so it has nothing to do with the IP address.

  I hope this helps, if you have any other questions do not hesitate to ask.

  Thank you

• Satellite A110-293 connected to WiFi, but no Internet connection

  My Satellite A110-293 to connect to public WIFI, but he can't see internet of it.
  I click on the sign of X to fix Vista and vista restarted network and the adapter, but it's always the same.

  What should I do... ?

  You mean public wlan hotspots called?

  It would be good to know if your wireless network is running your Internet has the House or if it's just a problem with lan external / public.
  What I can tell you now, are looking for the latest drivers wlan on Toshiba download page and try to update.