Droid screen Dead Zone?

Similar Questions

• Dead zone near the top of the screen in Safari? Cannot use Safari to log even here, because the arear connection is at the top. Virtually all nearthe fields are dead. I have no problem going into the fields to halfway to the bottom of the screen. Chrome w

  Dead zone near the top of the screen in Safari? Cannot use Safari to log even here, because the login box is at the top. Virtually all of the fields near the top are dead. I have no problem going into the fields to halfway to the bottom of the screen. It comes to Chrome and it works very well.

  I suggest you only begin by taking the measures recommended in this support article.

• Dead zones of the screen when I write

  I get the dead zones of the screen when I write. They are not always in the same area of the screen, but go across the width.
  Everyone knows this and they found how to solve the problem?

  Hello

  It's not easy to say what can be the problem.
  Well, first of all, I would recommend to recover the OS with the recovery CD. If after this procedure, the problem persists then you should try to update the display driver. If this doesn't help, so I guess that it s something wrong with the hardware. In this case, you should ask for help ASP.

  Good bye

• OfficeJet 7500 a touchscreen has a dead zone

  Touchscreen has a dead zone. See the photo below.

  

  Will not respond to pressure. Re-connected, rebooted, activation/deactivation via the power cord, etc. No change. Cannot use updated touch screen to update the firmware because the 'OK' button on the screen is not responding to touch/pressure.

  Cannot send a fax of the touch screen (but he won't).

  Given that it is a partial failure, I am inclined to think that the touch screen needs to be replaced.

  If no solution for the touch screen, is there a workaround solution where I can use the computer it refers (via usb) to send a fax?

  Computer is running XP pro.

  You can use the driver to fax on the computer to send a fax. Open the document you want to send, click on print and then change the driver for the 7500 a fax driver. This will send the document by fax. With respect to the screen, it does not sound bad. I would contact HP support to see what options you have available at 1800-474-6836 if in the United States

• 2740 - Dead Zones touchscreen - blind spots keep alternating from consecutive cycles of power

  Hello

  I return my 2740 two days and since I am faced with the question of areas inaccessible to the corners of the touch screen.

  To explain further, I'm numbering of the corners as 1,2,3,4 from the top left and go elsewhere (with the display in normal mode for portable computer with keyboard open).

  I'm dead in 3 corners (2,3 and 4) zones. I can drag and drop the slider to one of those corners, I can do the selection rectangle on the desktop windows (but of course from a position away from these corners, when even it means that they are not totally dead), but I can't save any tap (i.e.. clique) on these corners for about 1 to 1.5 cm. considering that, in the corner 1 works perfectly.

  What makes this problem even more strange is that these dead zones alternating custody after consecutive/recovery stops after sleep, that is.

  After stop/standby #1: blind spots are # 2,3,4

  After stop/standby #2: blind spot is no. 1

  After stop/standby #3: blind spots are # 2,3,4

  After stop/standby #4: blind spot is no. 1

  After stop/standby #5: blind spots are # 2,3,4

  After stop/standby #6: blind spot is no. 1

  And a normal restart has no effect on blind spots, there must be a stop or a sleep-CV. Given that each of the corners work, but not all together, makes me very doubtful that this could be a hardware fault.

  I already tried the following hotfixes mentioned by people facing similar problems with their 2740:

  1. different "Wacom Digitizer Driver" published by HP, April 30, 2010, June 23, 2010 and November 22, 2010, respectively.

  2 reloaded Windows 7 Professional 64 bit from scratch and I tried all kinds of drivers, even those of Wacom Web site.

  3. power cycled my unit, that is. has out the battery and ran my unit from the mains without the battery.

  Any information would be extremely useful and appreciated. Others who are facing similar issues well to respond to this thread as well.

  Thank you

  Mrinal

  For reference:

  Corner #1: Top-left

  Corner #2: Top-right

  Corner #3: Down-right

  Corner #4: Left-bottom

  I was able to completely solve the problem of dead with a simple update zone

  For convinience other users faced with similar problems, I'm reposting the fix as suggested by in4mer. If you encounter problems with these steps, please browse the thread started by in4mer, to:
  Indoor/outdoor touch screen and the Pen Firmware update

  Please download and install the following ' Indoor/outdoor Touch Panel and Pen Firmware Update', by using the following link:
  HP EliteBook 2740 Tablet PC - interior/exterior touch screen and stylus updated Firmware - HP Business Support Center

  Don't forget to read the 'Installation Instructions'. If the executable provided by HP is unable to create the bootable USB key, then follow the next procedure.

  Step 1. Creating a USB bootable BACK by following the instructions at:
  How to format a USB stick

  Note: You don't need additional utilities, so no need to copy the files from the Win98 startup disk manually on the USB key, just leave him with the 3 files illustrated in the screenshot of last second.

  Step 2 Copy all the files in the folder "Rompaq" on USB. This folder can be located either in the directory "C:\SWSetup\sp49201", or anywhere where the executable updates downloaded to date (i.e. sp49201.exe) excerpt from its content. Or, you can just use 7 - zip to extract the content of sp49201.exe and to access the folder "Rompaq.

  Note: You may need to activate the options "Show hidden files" and "Visualize protected system files", which is located under the 'View' tab in 'Folder Options', which can be opened from the menu item "tools > Folder Options ' in 'Windows Explorer '. In ' Vista/Windows 7' press the 'Alt' key to make the menu bar in 'Windows Explorer' visible.

  Step 3 Start your computer using the USB. After the comand prompt appears, type "SAM. BEATS", and then press on enter if the value of your monitor starts with"DRY"or type"HYDIS. BEATS"and press ENTER if the value of your monitor starts with"BEP ".

  Note: Boot Menu options are available by pressing the key "F9" as soon as the computer starts to boot and HP logo appears.

  Note: he showed both old and new firmware as even by updating the firmware on my machine. But he still solves the problem.

• Dead zone wheel 3000 Microsoft wireless mouse

  Hello

  I don't know how find this problem on the internet so I wonder if anyone can help make me the right words to look for this problem.

  I have Windows Vista Ultimate x 64 and a 3000 Microsoft wireless mouse

  When I scroll with the wheel, if I go down and upward, there is a dead zone where nothing happens.  I rotate part 2 wheel lines, and on the other to scroll.

  For example if I scroll in IE, everything is fine until I have stop and reverse the first line and then nothing happens, no scrolling at all and when I'm in the second row, it starts to scroll the means that if I scroll and down just 1 line nothing happens and that means on both sides , which means only 2 lines of scrolling that does nothing.

  I checked all the configurations of driver for the mouse, and there is nothing about it.  I don't want this dead on the mouse wheel zone

  I would really appreciate links, ideas on this subject.  I don't know if it's a driver problem, a hardware problem or it's just the way the mouse works.

  Thank you

  Hey thanks. Method 1 worked at http://support.microsoft.com/kb/838398

• On my work pc, I can't click on the links at the top of the screen while using firefox. This "dead zone" only affects the top 20% of the page, while below that I can click on all the links.

  This does not happen on my laptop or any other my work computer program works.

  This problem can be caused by that extended the Yahoo! toolbar or extension of Babylon also well down and covers the top of the browser window and therefore links and buttons in this part of the screen not clickable.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode

• U430 Touch - screen dead?

  Hello

  My U430 screen recently stopped working, and I would like some advice on what to do to fix it. The laptop runs fine otherwise, only the monitor does not work.

  Here's what I've tried so far and what I discovered:

  • Turning on the laptop on a new - no change
  • Connection to the laptop to another monitor via HDMI - the laptop is fully functional, and the computer does not recognize the dead, only the other monitor screen

  I also noticed when I opened my laptop before cracking noises, and hinge seems to be compensated. This leads me to believe that the cable connecting the screen to the laptop got captured or cut through the hinge - especially with the rest of the laptop work properly. Is there a fix I can do manually, or I have to send the laptop at home?

  EDIT: What happened today (13 February) during normal use of the laptop (sitting on a desk) after 5-10 minutes of normal use. The screen went black without any warning and it was the first indication of any problems with the screen - it had worked perfectly up to this point.

  Lenovo has concluded an investigation into reports of mounting hinge laptop U430 Touch and U530 Touch chess. If the laptop has not been deleted or otherwise damaged and is under warranty, please contact Lenovo's Service for support.

  Thank you

• Firefox is not completely functional in certain areas. There are dead zones, and I have to scroll down to click on certain points.

  I have two main questions. First of all, if I want to click on the links at the top of my screen, I see is the pointer, so I can't click on the link. In addition, the arrow from the top on my scroll bar does not work and the scroll pane will not work unless is positioned lower. These problems with Firefox 9.0, but I've recently updated to Firefox 10.0. Yet, I have the same problems. I tried my other browsers and I don't have any of these problems with these browsers.

  This problem can be caused by that extended the Yahoo! toolbar or extension of Babylon also well down and covers the top of the browser window and therefore links and buttons in this part of the screen not clickable.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode

• Re: Screen dead on my Satellite A200-27U goed

  Intermittent (and frustrating!) problem with my new laptop Satellite A200-27U. Every now and then the screen turns white and the only way to return to work is power off (and the battery) before turning on again.
  This problem may occur twice in the space of an hour, or not at all for a day!

  Any ideas?

  Hello

  I assumed that the screen remains empty after that laptop computer went into sleep mode or displays have disappeared because of the power settings.
  Well, I read about it in the various threads and everybody says that the BIOS update should help resolve this annoying problem.

  So I would recommend visiting the European driver of Toshiba page, to download the good BIOS and then to perform the BIOS update.

  Good luck

• Qosmio F20-137 - black screen - dead graphics card?

  I have a F20-137. The screen is blank and also the laptop can't seem to fly other views or through the output S-video. It is used to go back to work if you out the battery and you press the 'works' for a while. No idea why this worked!

  It's probably the graphics card no longer works? If Yes, where can I get replacement second-hand (I'm sure they cost more than the value of the laptop to buy new).

  David

  Hello

  It may be a malfunction of the graphics card or a motherboard controller. In both cases, you must replace that costs a lot of money. Sometimes it is better to buy second-hand or a new laptop

• Satellite A100-200 - screen dead/black

  A100-200 laptop bought in November 2006 and have not used it since. Last year, the screen is lit and failed frequently until it now shines at all. The fans are working and heat production.

  Some people say the motherboard was going on, but this seems to be such an easy answer even for the so-called experts. A Dell laptop, that I didn't have with professionals, saying he needed a new motherboard.

  I put one in me only to find out that it was the power supply (brick) who needed to change!

  Who can make a trust?

  Ideas, people?

  Hi alexlendoye,

  In my view, quite easy, you can check the laptop: connect a monitor external and that s all!
  If the external monitor works well, you the internal screen is defective and must be replaced (perhaps only the FL inverter which controls the backlight).

  By the way: you can get the new spare parts of an authorized service provider. Technicians can also swap the display for you it's a little tricky.
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Good luck! :)

• Satellite P300D fell and screen dead - what now?

  Hello

  my phone fell while riding my bike home...

  When I got home she was still going to but the screen no longer works.

  It's a satellite p300d, I myself check if broken/disconnected the cables?

  What should I do?

  Thanks in advance,
  Jannick van ' t Ende

  Well, the warranty does not cover this damage because it was your own mistake.
  The Toshiba ASP would be able to replace the screen, but you will have spent the money for this service.
  The screens are not cheap about 300-360Euros.

  But you can ask the ASP.
  Contacting ASP guys your country and ask for more details and costs of the service.

  Good luck

• Satellite Pro A60 - screen 'dead '.

  Hi all, hope you can help.

  I have a Satellite Pro A60. I stopped as usual, the other night, when I turned on the machine the next morning, he made all the usual noises, but no screen - just empty (black). I can connect to an external display and it works perfectly, so I know it's just the screen.

  I took it to a local repair place and they asked if I had given up and said that she needed a new screen, 180 lbs please. Thought I'd take the first tips. Certainly, it has not been abandoned or suffered trauma, in fact it barely moves away from my place of work.

  Would it be a fuse or something similar, or screens just die and I'm going to need a new? If she needs a new screen, where can I buy one and it's easy to fit/connect?

  Thank you very much

  Sharon

  Hello Sharon

  I'm really sorry to hear you have such a problem. As already wrote kody, check please if you can see a small image on the screen. If so, there is problem with FL inverter. It is the component of small material placed under the screen and it offers the backlight.

  OK, to buy the new screen is not a problem. You'll find maybe used one and it will be much cheaper than a new one. Replacement is no problem, but this must be done after the disassembly procedure. Talk with your friends. Maybe someone can help you with this.

• IdeaPad Z575 sudden black screen dead State now.

  Suddenly our Ideapad z575 died yesterday. We were just scrolling social media hollow and the screen went all black, all the front are turned on. And the only way to turn it off is to remove the battery. (pressing power 8 seconds does not.)

  It now powers a State of death where all the lights are on. The fan comes into play. And then the fan goes faster after like 1 min. And just like that. Only way to turn off withdraws battery...

  So far, we tried:

  out of battery and the power of line button and press power for more than 30 seconds.

  Turn it on without a battery, you use only the AC adapter.

  Activate it using only the battery without AC adapter.

  Same result on all time.

  Someone saw something similar, we would really like to fix avoiding going to the retailer (as is more than 5 hours of travel to get there.)

  Thanks in advance!.

  R M.

  Hi Rmeillo,

  Thanks for posting your concerns. Stuy570 suggested would be a benefit for us all to get the machine going again. But I'm assuing that your machine is still under warranty and it would be best for you to contact our service team to get your machine looked at. If something is necessary to replace at least it will be covered by the warranty.

  I hope this helps.

  Concerning