Satellite A100-200 - screen dead/black

Similar Questions

• Satellite A100-495 - screen remains black after switching to food

  After feeding, the screen remains black, the computer no longer works.

  What can I do, why?

  > After the transition to power, the screen remains black, the computer no longer works

  It works fine on battery?

• Upgrade Satellite A100-200 RAM question

  Hello

  I have a Toshiba Satellite A100-200, I want to move to 4 GB.
  I install 2 x 2 GB kingston kvr667d2s5/2 GB pc-5300 ddr2 667 mhz.

  Every time I make a control sites Internet it tells me to install PC24200 ddr2 533.
  The above will work even as the 4200 ddr2 533hz as those that I want are a lot cheaper.
  Thank you.

  Will be two sets of ram pergorm exactly the same thing as long as they are paired.

  Thank you

  Hello

  It depends on your bus (FSB) front.
  If the modules of 667 Mhz FSB support 667 Mhz then the PC5300 inserted will be run with maximum efficiency (667 Mhz).

  But if supports FSB, only modules of 533 Mhz and RAM will run at 533 Mhz only even using the fastest modules (PC5300)

  So what you need to do is check the FSB value. You can install a hardware diagnostic tool (IE Everest home edition) to verify the FSB.

  See you soon

• When I start my Satellite A300 the screen remains black

  When I turn on my Satellite A300, the screen remains black and doesn't change at all... Any help please?

  What is password problem in your other thread? Already solved or what?
  If the problem persists, I don't see any sense to start this thread because people don't understand what the problem is.

  Please do not mix two questions and explain exactly what you see on the screen after turning on your laptop.

• Beeping sound and flashing - Satellite A100-200 at the beginning upward

  My Satellite A100-200 is three months old and stopped working. When I start there is a continuous beep and a flasher above the hard drive indicator.

  Is that what I can do or is it a warranty repair

  Hello

  stop your machine immediately, or that you have installed things before? Have you tried to remove the hard drive and if you have 2 RAM modules at least one of them?

  If all fails, you will need to give your machine a local service partner. They will then solve your problem.

  Welcome them

• Can not burn the backup of the data on a DVD - RW on the Satellite A100-200

  Hello

  I did a lot of audio and data cd using Nero burning, but can not burn a dvr - rw data backup.

  Advice please.

  Satellite A100-200 and xp home

  What do you mean with data backup?
  And have you tried other DVD discs? I think your drive is compatible with the player so test drive of other manufacturers.

  On the Toshiba laptop I always use verbatim, and I never had any problems with it.

• Satellite A100-999 - screen flickers and goes black

  Hi, I have a problem with my Satellite A100-999.

  The screen flickers and then goes black. The works still laptop as I can connect to external monitors, but the laptop monitor are almost entirely black. It's happened before, but a reboot seemed to solve, however, Noah, as soon as the sign of the intel appears at startup, the screen turns off. It is not completely black - you can see the contours of some things on the screen, but it is almost completely black.

  Thanks for your help.

  Hi xiuxiuejar_1,

  HM, if you can still see a picture on the laptop external monitor should be ok and it must be a problem with built-in LCD screen.

  Usually, if the display is it black malfunction in UPS s FL which controls the backlight of the screen, but if the screen flickers, it s the internal LCD display itself

  I guess that your laptop is not under warranty more so I would try exchanging the FL inverter it's a lot cheaper. You can order this FL inverter of an ASP or eBay but is not so easy to replace, because you have to disassemble the laptop monitor.

• Satellite A100-796 screen suddenly flips & occasionally turns black.

  9 months ago, I bought my laptop (Satellite A100-796).
  Since a week ago, the screen flickers from time to time very fast (for like a second). What's worse, the screen came to turn completely black twice suddenly while he was studying. It seems that the computer was still active, but the screen went black still (on the power but in black only). The only solution was to press the power button for like 10 seconds to stop the computer laptop everything.

  I have installed new software, so I don't really know if it of a hardware problem or not? Everyone recognizes these symptoms, or you can give me any advice? I always had a pick-up-and-return-guarantee, do I have to use this right now or is there a quicker and better solution?

  I really hope that someone can guide me through this, given that the laptop is very precious to me.

  Kind regards

  Liem

  We should read about some facts. The fact is that this issue must be linked to a hardware malfunction.
  Kody said the FL inverter could be faulty, but I think that the internal display could also causes this issue

  There is only one real way of this knowledge. The parts must be checked!

  So contact the ASP in your country and ask for verification of the laptop.

  Best regards

• Satellite X 200 - 23 g - black screen after install NVidia drivers

  The problem appeared after reinstall Windows XP Professional. With installed NVidia drivers (179.28) after reboot the screen is black. System booted normally, sounds, it has played. With no installed NVidia driver picture is normal. After reading forums I understand this problem with properties of the monitor's EDID.

  Linux systems to use the UseCustomEDID property, and use received monitor EDID struct everything works fine. Windows not not a similar option. Also, it is impossible to complete the installation from a resuscitator of disc. Black screen on the final stage. To restart with the mode VGA Vista say, who is unable to complete the installation in this mode.

  Can you help me?

  Hello!

  I've never heard of this EDID you want to say, but you should use Toshiba drivers.
  Because no Toshiba driver don t have the graphics card overheating protection can overheat. The graphics card may be damaged.
  With the Toshiba drivers, you are on the safe side

  http://forums.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Then try to start in safe mode, remove the old graphics driver, restart the computer and then install the drivers of Toshiba.

  Good bye

• Satellite X 200-pixel dead and guaranteed

  Hello.

  I counted two dead in mine satellite x 200 lcd pixels.
  If I bring my laptop for repair under warranty, did they replace lcd?

  How many dead pixels are to warranty service?
  Toshiba guarantees that they laptops will have any dead pixels?

  Thank you.

  Do you know Toshiba knowledge base Portal?
  You can make it there
  http://EU.computers.Toshiba-Europe.com/-> download-> Knowledge Base & support

  Here, you can search for different documents, FAQ and TSB!

  I searched and found these docs:
  [LCD displays - information about the technology and pixel screen fault tolerance | http://aps2.toshiba-tro.de/kb0/FAQ8702EI0000R01.htm]

  You will find all the details about the dead pixel policy!

  See you soon

• Satellite L10-333: screen stays black, until I hit the edge of the screen

  I have a Satellite L10-333, which is about 3 years old, it has suddenly started having screen problems.
  It started with a white screen instead of the normal and a black line all downstairs in the middle.

  Now when I turn on the pc, the screen remains black and dead until I hit the edge of the screen and when the screen comes alive, I must hold and press part of the cover, so that the display stays on...

  Anyone know what's the problem?
  I thought it might be a loose wire or connection.
  Someone else has or had this problem?

  Thanks for your help...

  I agree with you. It must be a contact problem. In my opinion, it is not important if anyone else has this problem too and you have to find the solution as soon as possible.
  The laptop must be disassembled and check the connection of the screen. Now the question is what to do. Can you check it alone or you need professional help?

• Satellite a200-1sv screen remains black at startup in Vista

  Hello

  We have a problem with Toshiba Satellite A200-1sv my girlfriend: when we started, most of the time, the screen remains black, while the computer starts: after awhile, we can hear the sound of windows (vista).

  In addition, if connect us another screen of the computer, it displays the scheduled start screen. In order to use the computer, it must launch a few times... The support guy where we bought the computer told us "the computer is not compatible with Vista, we cannot do something".

  Can we do something?

  Thanks in advance,
  Ju

  I have to smile to read this message
  Mainly, this statement is funny;
  > The support guys where we bought the computer told us "the computer is not compatible with Vista, we can't do something."

  I think that this laptop has been delivered with the Vista operating system. So why the guy said that the laptop is not compatible with Vista?  :| …. that's nonsense.

  First the A200-1SV belongs to the PSAE6E series and it s fully Vista capable.
  Secondly, like you say the external screen displays home Toshiba screen and so I guess that's just a matter of adjustment.
  What you can do is to use the FN + F5 key combination to switch between display devices.

  If it doesn't help to try to put the laptop back to the factory settings using the Toshiba Recovery CD!
  In this case, the new OS, driver and tools will be installed and then everything should work fine.

  Good bye

• Satellite P100 - the screen goes black

  Hello

  I have a Satellite P100 and randomly, the screen goes black but the system continues to operate. I downloaded the latest drivers from toshiba, all power options the maximum support, run ccleaner and driver Sweeper to remove the old entries driver, re-installed the login screen of the mobo and nothing seems to work.

  The screen goes black sometimes when using windows but STILL turns black as soon as the ramps of gpu for example of playing a video or comparative analysis of the graphics card.

  Any help would be greatly appreciated.

  Model: Toshiba Satellite P100-PSPA6A-02NO21
  Processor: Intel Core 2 Duo T7200@2GHz
  GPU: Nvidia Quadro nvs 510 m
  Chipset: Intel i945PM
  HARD drive: Fujitsu 148GB
  RAM 2 GB
  Windows 7 Ultimate SP1 operating system

  Hey,.

  > ALWAYS goes black as soon as the ramps of gpu for example of playing a video or comparative analysis of the graphics card.
  This means that the graphics card is defective

  Theoretically, it could be an overheating problem too. Higher time can also cause a black screen. You should try everything that is possible to clean your laptop using the jet of compressed air to blow the dust from the cooling fans.

  If it doesn t help it seems to be a hardware malfunction but seriously a point would be interesting: have you noticed the same thing with preinstalled OS (Vista) Toshiba?

• Re: Satellite M100-221: screen turns black, moving display

  Hello

  I have a problem with the LCD on toshiba satellite M100-221.

  When I move the screen, the screen goes black.

  The display only works correctly when the angle is close to 90 degrees.

  Hey Buddy,

  I m not a technician but I agree with the user above. For me it looks like a hardware problem and you should go to a service provider allowed. Technicians can check your defective parts for computer laptop notebook and Exchange.

  You can search for the nearest Toshiba for ASP site. ;)

• Satellite M30x-165 - screen is black

  Dear all,

  Unfortunately, my screen is black.

  Whenever I start my laptop / notebook my screen (display / monitor) is black.

  I can't use my laptop because I don't see anything. The system works.

  Why does this happen?
  What can I do against it?

  I'd appreciate any help.

  Best regards
  JJ

  Hi JJ,

  A friend of me had the same problem on his Satellite M30x too. He didn t see an image on the monitor internal but external monitor works properly.
  Also, do you have plugged an external monitor to the laptop? You see an image on the external monitor?

  However, after testing an external monitor that works, he replaced the internal screen FL inverter and the laptop working again properly. :)

  If t, you can see an image on the external monitor too, it seems to be a hardware problem, maybe the card mother or something else.
  You can access the BIOS?