Drucker USB keine zum Pc connection

Similar Questions

• C - USB VGA card cannot connect to Macbook pro Multiport

  C - USB VGA card cannot connect to Macbook Pro Multiport

  Writing an effective question of communities of Apple Support

• I have my camera, a Kodak M1033, connected to the computer by a usb cable. The connection is not recognized. What I can do.

  My laptop with Windows XP does not connect to the camera?  How can I reconnect these?

  I have my camera, a Kodak M1033, connected to the computer by a usb cable.  The connection is not recognized.  What I can do.

  Install the software from the CD provided with the camera. If no CD not supplied with the camera, you can download Easyshare for XP to Kodak support on kodak.co.uk

• The router configuration E3200 using USB Modem (wireless) to connect to internet

  How to configure a router E3200 using a USB wireless modem to connect to internet? It's my only choice, I don't have a wired connection and I do not have telephone wires and there is no authority to act differently. PLEASE I NEED IMMEDIATE HELP. I WAS TOLD THAT I COULD DO THAT!

  The only option is to use a computer to connect to the internet and then see the E3200 as access point and switch.

  See http://homecommunity.cisco.com/t5/Wireless-Routers/ICS-on-WRT54G-please-please-please-help/td-p/1184...

• HP laserjet pro m521dn mfp: HP jetdirect 2700w USB wireless print server connectivity

  I just bought a M521dn Pro Laserjet and a Jetdirect 2700w.  However, the M521dn has only a USB port that does not recognize the Jetdirect.  However, the Jetdirect 2700w is listed as an accessory for the M521.

  The Jetdirect 2700w works with the M521dn?

  Is there a hidden usb port, I am not find to connect to the wireless print server?

  Help, please

  Thanks in advance!

  Hello

  HP jetdirect 2700w USB wireless print server support M521 series including M521dn. Your printer has 2 USB ports, one on the front (use for direct printing without a computer) and the normal port is at the back (not flat port, I usually call it as 'round' port' and you need a normal/standard USB printer cable to connect to the Jetdirect 2700w (round end in the printer and the flat end to the Jetdirect 2700w).)

  

  Concerning

• Printer problem - after changing the cartridge, I get a message that the USB cable is not connected

  As above. I checked the USB port and it is connected.

  Original title: printer problem. After changing the cartridge, I get a message that the USB cable is not connected?

  Hello

  1. you receive an error message/code when you try to print?

  2. What is the serial number and model of the printer?
   
  Follow the steps.
   
  Method 1
  Run the hardware and devices Troubleshooter
  This utility checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Also run convenience store Print that would help us diagnose the problem better
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2

  (a) check the physical connection of the printer and make sure that the USB cable is properly plugged.

  (b) connect the printer to a different USB port and check if it helps.

  (c) check the on another computer.

  Method 3

  Run the fix - it tool from the link.

  Diagnose and automatically fix problems printing and printer http://support.Microsoft.com/mats/printing_problems/

  Method 4
  If the previous step fails, follow the steps described in the following link:
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
   
   
  Let us know if it helps.

• Connect iPad Pro 12.9 "on PC 3 USB port using the new USB 3 iPad camera connection kit

  Hello. I would like to connect my iPad Pro 12.9 "to my PC using the speed of the USB 3 port of lightning of the iPad for faster synchronization with back ups. I bought the new camera USB 3 connection and A kit to A 3 USB cable, put everything together and down to iTunes, but it does not recognize the iPad. Has anyone tried this before?

  You don't need the Camera Connection Kit for this. Connect your iPad to your PC using the lightning to the USB cable supplied with the iPad.

• Re: Toshiba Stor.E Basics 1.5 TB, USB 3.0 - about connection internal

  Please how can I know if inside the drive is sata native or with USB soldering on the circuit board?

  My model is: HDTB115EK3BA

  Thank you.

  Hello

  Unfortunately, the Toshiba STOR. E BASICS - BLACK 2.5 specifications page "-1.5 to provides no details on the controller, but in my view the inside of the box, you will find a common SATA 2.5 which is connected to a controller HDD USB SATA."
  http://www.Toshiba.EU/hard-drives/portable/store-basics/hdtb115ek3ba/

  You can also try some freeware like HDDscan for example tools to scan the HARD drive and get more details.

• Satellite A660-186 does not start when the USB nano-receiver is connected

  Recently I bought a mouse a4tech g7-750 with the nano-receiver into usb port plug.
  After the nano-receiver is inserted into the USB before lighting, computer laptop does not start.

  Only the cursor is displayed, so that it is displayed before the screen with the ability to enter the F2 BIOS or select the F12 boot device.
  Without the nano-receiver laptop runs without problem.

  Any advice?

  Thank you much in advance.

  Hello

  During the POST (power on self-test) all parts laptop as RAM, motherboard (also of connected devices) is enabled.
  If a problem (compatibility problems, etc.) would be detected during POST, then the laptop would not initialize correctly.

  This mouse nano-receiver is unknown to me and I m not very well what s wrong with this unit, but I doubt that this problem is related to the laptop.
  I guess that the laptop starts properly with other devices connected to the laptop. right? Well well, in such cases, there s no question cell phone but the 3rd unit affect the functionality of the laptop.

• Usb Extreme, by airport connection, printer shows offline

  I have 2 iMac, Airport Extreme using computers to connect wirelessly to the internet.  My HP Photosmart C4680 is connected to the Airport Extreme, by using the USB connection. I had little work on the House then I unplugged the printer from the network and now when I reconnect without other software changes, etc. - it just shows that the printer is off line as soon as I try to print anything.  I reset my Airport Extreme, checked the drivers (version 12.0 website says 11.0, so I did not tells them that the installation disk) for the printer, the worm of Mac Os X 10.6 is what I have.  The printer works fine if it is physically connected to the iMac (or the other), but does not work when it is connected to the Airport Extreme.

  First of all, using Airport utility, make sure that your airport has the latest firmware.

  On your Mac, download and install this: http://support.apple.com/kb/DL907
  
  Restart your Mac.

  Reset the printing system:
  
  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and then beside the dropdown 'Use', select the model of the printer (not AirPrint). Wait for the 'Add' button becomes available. Until it clicks.

• Device USB not recognized - device connected USB has malfunctioned and Windows does not recognize it

  I have a HP Pavilion dv4 laptop running Windows 7 Home Edition Premium and the USB ports worked well for a HP deskjet printer and an older Casio digital camera. Then one day, the laptop decided not to recognize the Casio digital camera and gave the error message "USB device not recognized" and also indicated that the device connected to the computer has malfunctioned. This prompted me to buy a new digital camera Canon. Well, a new camera has not fixed the problem. Now, anything that is connected to one of the 2 ports USB will not be recognized by my laptop. Help!  I am at a loss to understand this.  I tried using Microsoft suggested below:

  Suggestion 1: the problem with USB devices, uninstall and reinstall all USB controllers. This allows controllers to recover the port USB of his condition does not respond.
  USB controllers represent the USB ports in Device Manager.

  a. Click Start, type Manager of devices in the search box of start and press ENTER.
  b. expand Bus USB controllers.
  Note: you may scroll through the list to find this point.
  c. the first USB controller under Bus USB controllers right click and then click on uninstall to remove it.
  d. Repeat steps above for each controller USB is listed under Bus USB controllers.
  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.
  f. check the USB device to see if it works.

  This has not fixed the problem.  Then the Device Manager, I tried to update the drivers on all the USB controllers and root hubs. While some may have received software updates downloaded, it still has not corrected the problem of unrecognized USB device after the computer is restarted.  I hope that someone knows the solution to this situation and can pass it on to me. Thanks for reading and any help display.

  Read previous messages revealed the solution for USB devices not recognized on my HP Pavilion as well as several other laptop models.  Shut down the computer and remove the battery and wait for about 15 minutes. Reinstall the battery and restart the computer.  USB ports are working to download pictures from my digital camera from Canon and charging a cell phone, etc...   I hope it helps others with this problem!

• USB OTG does not connect in A6000

  Please advise how to connect the USB storage to Lenovo A6000 by OTG?

  If there is no activity on the phone if you connect USB OTG, it means that it is not supported

• Problems with USB-6218 in DAQmx connection diagram

  I use MAX to implement the tasks of measurement thermocouple for part of our engine Diesel DAQ. It's a simple enough part of DAQ - read in the thermocouple temperature measurement and then draw. The problem that I am running is with the wiring diagram. Looking at the USB-6218 casing, it is labeled for the analog inputs, but when I go back the stitching in the measurement and Automation Explorer (photo attached), it shows that the pins are marked differently.

  For example, that I choose to have a thermocouple (two sons) in analog input 0 (ai0). The diagram shows that I should connect the two wires of thermocouple to channels 15 and 16 which are AI0 and AI8, respectively in the pinout diagram. Then say I assign another thermocouple with 8 analog inputs (ai8), he tells me to write the two wires of thermocouple to 16 and 28 channels which are AI8 and AI GND, respectively on the pinout diagram. This is great except for the fact that both ai0 and ai8 use the same channels on the DAQ card.

  I get the same thing when I select ai1-> CH 17 (I 1) and 18 (AI 9) CH then ai9-> CH 18 (AI 9) and 28 CH (AI GND). Channel 18 (9 analog input) is used for both thermocouples.

  No idea as to why LabVIEW is bunk of the analog inputs?

  No, you cannot change the pairings and as shown in the picture, ai0 and ai8 are right next to each other. Can't be more close to everything.

• Der Sprzątanie Drucker works nicht über Zendfrequentie connection

  Mein Drucker korrespondiert offenbar nicht mit meinem Notebook drahtlos über Israel, obwohl both uber Israel connection make.  ERST mit einem.  pre-treatment Verbindungskabel druckt er

  Hello

  Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:

  http://support.Microsoft.com/common/international.aspx

  Thank you

• USB loses the external connection with hardrive

  Hello

  I have a new HP pavilion touchsmart 15 notebook PC 15 - n058ed with some problems on USB 3.0 in combibation with the Toshiba external hard drive.

  Sometimes, the connection is lost. So backup refuses to go. The message to reformat the drive to use it again.

  The hard drive is still powered. The laptop does not work. Turn off at night.

  Nobody knows what is happening.

  Best regards Jan

  Hello new probably,

  I'm sorry that the solution I linked you was too difficult to understand. I can certainly understand that as the site is not exactly easy to use. I'll give you a few steps to try until find us a solution that works for you. Please, try the steps what I am stating to you below:

  Step 1. In the tile Menu type 'Control Panel'

  Step 2. Click on Control Panel

  Step 3. Click Security / Power Options

  Step 4. Click on change power settings

  Step 5. Click on change advanced power settings

  Step 6. Scroll USB settings and disable the USB selective suspend setting

  This will prevent your system to put the USB drive in mode 'sleep' and should solve your problem. Please if the problem persists re-post and we can try additional steps. Thanks for posting this topic on the Forums of HP. Have a great day!