dual monitor shortcut past active windows

Similar Questions

• Satellite A30: Dual monitor not recognized by windows

  I fed the second monitor output of my Satellite A30 to an image converter to generate a composite video signal. So that windows activate second monitor output on the laptop I have to have either a monitor or a projector fixed. Y at - it a simple way to provide a "dummy" device to trick the laptop into thinking he has a second monitor and removing the need carry an additional kit around.

  Hello

  I put t know what is the problem. If you want to use the external monitor so use the RGB port on the back of the laptop. The use of the FN + F5 key combination to change the display device.

• Dual monitor boot problem with Windows 7 Professional 64 bit after installation of any graphics program like a game.

  I have built this platform with the help of the owner of a store of 4 cumputer teir 2 years ago. We initially put Windows Vista 32 bit on the system to Vista 64 bit unstable atm. For 2 years, the computer worked like a dream. Last week I made a clean wipe of windows vista and windows 7 professional 64-bit installed. The system has two monitors. The primary monitor is a sony bravia with 26 "led and secondary for watching movies is that a 55 '' led Samsung 1080 p 240 Hz. The graphics card is a geforce GTX 295 nividia. It has 12 GB of Ram and the CPU is an i7 965 @3.20.

  The problem I have is this. After the installation of any game average to work with windows 7, the screens to reset their resolutions automatically more than a few times as they are confused. Sometimes, I have to return the screen to its correct resolution after installation in full. Most of the games and then run fine. After installing the game or any game designed for win 7 startup of computers is all messed up for the monitors. After starting hand 26 "sets its resolution and then after about a second 30 pause the computer makes the sound (the double) that it is resolutuons to reset monitor again? After that this second reset about 1-2 minutes the computer is good to go, unless it sets the res evil. The problem is the computer has never done that with vista and it is very annoying say the least. It still freezes the installation of some games. The only way to resolve what I found is the restoration of the system. The computer starts normally and screen ground is defined once she has always been. The only problem is when you install another game, the problem is their new. This problem is worse in some games.

  The latest nvidia drivers have been installed. There is no conflict in the device with the exception of an old printer Manager. The two comes is set to 60 hertz. I searched all over the internet and there seems to be a problem with windows 7 without solution. I am at a loss. Any other information that you need let me know and I'll post it. Thank you!

  Hi ancientone618,

  It sounds almost as if there is a Windows update that is in conflict with your NVIDIA Driver Installer.  I would say to disable automatic updates of Windows to see if it might help:

  http://Windows.Microsoft.com/en-us/Windows7/turn-automatic-updating-on-or-off

  In addition, please see the article with some useful information:

  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Dual monitor problems

  I have been using two monitors (1 monitor my primary monitor, 2 monitor showing an extension of monitor 1) for several years now. All of a sudden, monitor 2 links is no longer. I swapped the connections from the cables to the back of my Tower. When I started my computer, startup began the 2 monitor, but as soon as Windows is fully booted, 1 monitor again became the primary monitor and 2 the screen went black. I guess this isn't a hardware problem.

  After some tinkering on the video card Control Panel, I could get 2 monitor to display, but it is no longer made reference the name of the 2 monitor (Asus) as a monitor. It refers to the second screen as "Digital Display" and considers it a generic Non - PnP monitor. I don't understand how it happened, why it happened or how to get my second screen displays correctly again. Currently, monitor 2 a haywire resolution, and I can't improve it (my own, its because he does not recognize the Asus monitor properly and does not know the capabilities of resolution of it).

  I hope someone can understand my problem and is able to help, because I simply can't understand it.

  Hello

  Sorry for the delay in response.

  Thanks for posting your query to the Microsoft community. If you are always faced with the question, I suggest you to follow the steps and check if it helps.
  First update all the drivers on the manufacturer's Web site. I also suggest you to re - configure multiple monitor configuration and check if it helps.
  Guided Help: Setup dual monitor is easy in Windows 7!

  Additional information:
  Move windows between multiple monitors

  Hope that the information provided has been helpful and let us know if you need assistance in the future. We will be happy to help you.

• Dual monitor Dell and your Sharp TV screen

  I have a Dell 3008WFP monitor and a TV Sharp LC52LE810UN of. The monitor is connected using DVI and the TV is connected using HDMI. In 'screen resolution' the recommended setting for the Dell monitor is 2560 x 1600. It is a 2 monitor. I can't double bill for work. correctly. The resolution gets blurred. The only way I can make it work is to expand the display. It has already used to work when it is used my Samsung P2770 monitor.

  I am running Windows 7 and my graphics card is NVIDIA GEForce 310.

  Can someone please.

  Hi ManajitSengupta,

  You want to hope that it is not a compatibility problem, because that could leave you a GROUND for a solution. Assuming that everyone even working on a solution. I had a few problems after the upgrade of Vista that never existed when running the Windows 7 RC on the same computer. The cause of a problem is not necessarily in a straight line between Win7 and the problem device. The only things I can think of now are the driver/software standard, tedious, technical troubleshooting. Starting by ' screens exhibit the same behavior when a simple SVGA driver is all that is installed? »

  Some device of even difficult problems have been resolved by reinstalling

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/cant-use-dual-monitor-with-Windows-7-64-bit-and/58f2706d-ed89-46ab-80f1-ad677b4c1e13

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/Windows-7-docking-station-dual-monitor-display/2abeebc6-8015-4FB1-B948-dba5e27c9bfb

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/dual-monitor-Setup-cannot-move-Windows-from-one/e14a0b3b-8e95-4FA5-9f68-036dde61f0b6

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/multi-monitor-support-in-Windows-7-Remote-Desktop/c629d317-88c2-48BA-973a-da04a8c9d579

  http://Windows.Microsoft.com/en-in/Windows-Vista/set-up-multiple-monitors

• I have a Setup dual monitor.  When I paste develop settings from one image to the other, Lightroom going on the active window.

  Strange problem.  5.5 Lightroom.  Windows 8.1. Setting up dual monitor.

  I am processing a lot important photos.  I have #1 monitor set as my main to develop the window with #2 monitor configured only to display a larger version of the image, I work with. If I copy the parameters of development out of a picture and try to paste them on another image, Lightroom will increase from the #1 to the monitor #2 monitor in the main window to develop and does not display anything on the monitor #1.

  If I then try to paste develop settings on another image on the monitor #2, LR then displays a larger version of the image, I have been working with the #1 monitor.

  To work like I want to, I have to constantly drag my develop the window back to the #1 monitor whenever I try to paste the settings on a new image of development. How can I make this stop?

  I have similar (but different) problems dual monitor. Just posted this on my thread unanswered. It may be useful:

  Blessed excrement! After frustrating months of bi-ecrans LR questions and a month of waiting for an answer on this forum, I called Adobe technical support. Only five minutes before dialing, I had updated my PhotoShop CC application. When the useful Adobe tech classmate is online, I can't reproduce all the issues that had been plaguing me. It is a stretch... a biiiiig stretch... but he is feels/figure/seems that PhotoShop CC update has fixed my bi-ecrans LR problems! I'll keep track of what other programs I use and open while LR - ing to see if they are relaxing, but for now, everything is quite in front of two monitors.

• What is a keyboard shortcut for the window active expansion/contract?

  What is the shortcut for maximize/minimize the active window?

  Open the system menu with Alt + space N

• Installation of the driver software window opens on the second monitor in a dual monitor extended installation of the monitor

  The "Software Installation" window will open on the second monitor in a dual monitor extended installation of the monitor

  I have a dual display setup. A 225WS 1680 x 1050 monitor LG is connected via a VGA cable and a VGA - DVI converter to a DVI port on a Radeon 6850 video card. The second screen is a Samsung HDTV set at 1920 x 1080 and connected via HDMI on the same video card. I have set up the screen LCD as main monitor and the Samsung HDTV as the extended display. HDTV is most of the time, but I use it at least once a day. This isn't a driver problem, because it happened also when I had an old Nvidia video card and it is fixed by a new installation of windows and setting up of screens from a square.

  The installer works great almost all the time except when I try to use some programs or Windows functions (7). When I try to start the MozBackup application or I pop in a new usb device and click on the notification bubble, both these windows (MozBackup and the "Driver software Installation" window) open in the center of the HDTV as opposed to the LCD (which is defined as primary). The problem is that the views are ~ 3 meters out and HDTV is mostly off.

  I sent a bug report to the developer of MozBackup because this part is perhaps a problem with its software or what old Windows functions and hooks it uses, but the window "Installing the driver software" (or who knows what other program Windows Basic) has exactly the same problem and is part of Windows.

  What can I do about it? I DIDN'T put the displays in any mode "clone" to have office in mirror between them. Is - this fixable somehow? I guess that is not a problem with the video card drivers because I used two different video cards with either the manufacturer or windows update drivers and the problem is the same.

  I'm talking about a window similar to this one
   
  http://jaunty-electronics.com/blog/wp-content/uploads/2012/09/Freedom_FRDM-KL25Z_driver_install.PNG

  Try changing the backup.ini

  you find it in

  .. \Program files (x86)\MozBackup\backup.ini

  Open the file backup.ini with editor

  Check if you have the rights to save the changed files in this directory. You may need to change the Directory rights

  Change the value of "1": monitor

  wyzodir =

  ; Monitor: the monitor number where MozBackup window will appear

  monitor =1

  '2' or whatever the value of your primary monitor is:

  wyzodir =

  ; Monitor: the monitor number where MozBackup window will appear

  monitor =2

  System main screen could be identified as '1 '. If you have changed the monitors, it can be used internally '2 '.

• Windows Snap function does not work inside a Setup dual monitor.

  I have Windows 7 Home Premium x 64 fully updated.  So far, it's great. But I have two monitors, 1440 x 900 primary and secondary 1280 x 1024 with the secondary monitor on the right of the main screen. When I try to 'break' a window on the edge of each monitor located next to the other monitor, nothing happens.  I was wondering if it was a typical problem people have seen or if it was just me and if there is no way to do work or if there was a patch for it. (A built-in feature of Google chrome "fit" allows inside monitors). Thanks for your help!

  Hello

  The action which engages a window on the side of a monitor, when you drag a window, is when the cursor comes in contact with the last row of pixels on the edge of the screen. Since there is no physical "edge" where monitors meet on a dual monitor configuration by dragging a window to that location does not work.

  You can always break a window inside edge on a double configuration monitor using the keyboard.

  = Wink left arrow Windows logo key + left key
  = Wink right arrow Windows logo key + right key

  I hope this helps.

  Thank you for using Windows 7 Ronnie Vernon MVP

• [JS SUI] If you use a dual monitor, how to set the location to see the window?

  If you use a dual monitor, (SUI) window is displayed on the main screen.

  I want to display the window (SUI) based on the location of InDesign.

  How to get location of InDesign?

  Thank you.

  app.activeWindow.bounds will give you the coordinates of the window further in Indesign. $.screens will give you information on the displays. You can use these two properties to deduce the position of indesign.

• Discover the problem of dual monitors in Windows 7.

  Hi all

  I have a problem on Windows 7, VMware View on two monitors, I can start a windows 7 Enterprise on two screens (extender mode) but all windows browsers or explorers can be moved easily from one screen to another screen, movement within a single screen is fine.

  However, Windows XP does not meet this problem...

  Anyone have the same problem and how can I solve it?

  My infrastructure: view vSphere vCenter 5.0 5.0 5.0

  Samson

  I've lived the same problem after upgrade to view 5.0 and this is what worked for me:

  http://VMtoday.com/2012/07/lag-when-dragging-a-window-between-monitors-in-VMware-view/

  Adding that the Configuration setting as shown it fixed on my dual monitor configurations.

• How to install dual monitors in Windows XP?

  Original title: I have more xp dell. Two monitors. A video card plus double the original video card. How can I get my TV wired to computer with s-video plug in? Thank you

  I installed the dual video card. I got hooked tv before but unplugged & cannot get hooked again.

  Hi Ben,

  Thanks for posting your question in the Microsoft Community.

  From your problem description, I understand that you cannot configure both monitors. Please let me know if this isn't the problem that you are experiencing.

  Before troubleshooting, I have little information on the issue.

  Did you of recent changes to the computer before this problem?

  Try the methods provided for in article below and then check after each method:

  Setting up dual monitor:

  http://www.Microsoft.com/athome/organization/twomonitors.aspx#fBid=1bZqH23uobu

  If the problem persists, post your reply with results and questions above. We are happy to help you with the advanced troubleshooting steps.

  It will be useful.

• Dual monitor second dark screen

  I use a Setup dual monitor both monitors same accurate on my pc at the same time on the same exact settings and one of the screens is much darker that the other I tried switching on the cable with no result and have searched the Internet for the past hours searching for answers with no result, any help would be appreciated , I'm completely at a loss I'm 100% sure that it is not a monitor problem

  Hello

  The mother system/card manufacturer and support of the manufacturer of video cards and devices, online
  documentation and drivers and forums would be a good source of help and information.

  These should help:

  Connect the multiple monitor to your PC
  http://Windows.Microsoft.com/en-us/Windows-8/how-connect-multiple-monitors

  Do more with multiple monitors
  http://Windows.Microsoft.com/en-us/Windows-8/multiple-monitors

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Dual monitor displays time #1 & 2 in 1. How can I fix it?

  While trying to set up multiple monitors, I realized #2 is not activated, then when I identified the two say #1.

  I've read this before, but can't remember how to fix it. I have readit was in initial Setup, which I just got.

  Help, please!

  Hello

  You can re-setup two monitors this link & check if the problem persists:

  How to configure and use multiple monitors in Windows XP?

  Reference: Setup dual monitor: two screens are better than one

  Hope the helps of information.

• The dual monitor settings not remembered

  I just added a second monitor (same size and resolution as the first monitor). After using "personalize > display settings", activating the second monitor in the mode double screen, monitor the position and resolution, then selecting "apply > Save Settings > OK" the new monitor will work fine. However, when I restart the PC, Windows knows more on the second monitor and I have to redo all the settings more. It's ALWAYS happening (and not sporadically). I've never had this happen before in configurations dual monitor. I don't do something correctly?

  I'm under Windows Vista Ultimate 64-bit, 2-24 "1920 x 1280 Digital monitors, graphic adapter advanced ATI HD 4850 with dual output DVI, 8 GB of memory.

  Thanks in advance for any help!

  Jon

  Jon,
  Download ATI Catalyst Control Center, which includes the updated drivers for your card, of the following:
  http://game.AMD.com/us-en/drivers_catalyst.aspx?p=Vista64/common-Vista64

  After installing the software and restarted, you can access their software by clicking on start-> all programs-> Catalyst Control Center, click on CCC
  Then adjust your settings of dual monitor since the display under chart type Manager, here you can set the desktop, the refresh rate resolution and you want 1 of a possible 5 modes (press F1 to get help with their applicaton) display. Make sure that save you after having selected the desired configuration. Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.