Dual monitor Dell and your Sharp TV screen

Similar Questions

• Dual monitor Mac - can only access secondary screen - cannot access main screen

  Hello

  Please excuse my bad English.

  I'm working on a Mac Mini with display dual display. When I run the Lightroom application, it displays on my main screen, the secondary display (magnifying glass mode) and I can't access the main panel of Lightroom (library, map, printing...).

  I first updated to the latest version, then restarted my computer. Still the same problem. When I turn off one of my screens, I can access the development tool. I then turn off the second screen. When I turn on my second monitor, Lightroom returns to the secondary display.

  How can I reset the settings in Lightroom to begin to work again with my two screens?

  Sounds like your second, secondary display is listed as principal by OS X.

  I run a Mac for a little more than 2 years, laptop to an external display connected several times, and in my humble OPINION Mac do all this while two screens. Not as easy as a Notepad of Windows.

• Help needed to put in place 2 monitors Dell and my Smart TV for PC Dell

  Could someone help me with the connectors I need to set up multiple monitors on my Dell system? (I intend to use the Dell or Amazon store).

  Here's what I would do:

  1. Connect my two Dell monitors so I can work on several tasks in Photoshop...

  2. Also to connect my PC to my Smart TV in order to view the video and make it sound on the web through my PC.

  3. I have listed below my model numbers and I'm comfortable with the techno talk and make connections once I have my plan

  Any ideas on the next steps for me?  No idea about the parts to order.

  Video card in Dell XPS 8700 GeForce GTX 745

  Reference Dell monitor SE2416H (primary)

  Reference Dell E207WFP monitor

  VIZIO smart TV M322i-B1 (2 HDMI ports)

  GeForce GTX 745 ports: VGA/HDMI/DVI-D
  SE2416H in the ports = VGA/HDMI
  E207WFP in ports: VGA/DVI-D
  M322i-B1 in ports = HDMI/HDMI

  You need to connect to all the monitors at the GeForce GTX 745 =
  GeForce GTX 745 output VGA--> VGA cable VGA--> SE2416H VGA (main screen)
  GeForce GTX 745 DVI - D on--> cable DVI to DVI--> E207WFP DVI (secondary monitor)
  GeForce GTX 745 out HDMI--> HDMI to HDMI cable--> M322i-B1 HDMI (monitor tertiary)

  You use the Nvidia Control Panel to activate the secondary and the tertiary sector as extended monitors.

• No display on the monitor, computer and your monitor work?

  I have a few years old desktop computer with windows XP a few days back I lost all the screen. I have looked for answers on YOUTUBE, what advice to clean the Rams

  I did the screen came back, but even once it is out after a few days. I can't do any screen of the monitor is turn on the computer, therefore, but not display.

  Can you please help!

  The first thing to try is to make sure that the cable that connects the monitor to the video card of the computer is properly connected and the screws are tight.

  RAM does not usually cause no problem 'display '.

• U2913WM, dual monitor, contrast and brightness configuration is reset to zero

  SER # CN-05W92N-74445-649-A3DL
  Computer DELL windows 10
  AMD Radeon 6900 with latest drivers
  Provided by Dell dvi - d cable
  2560 x 1080 at 60 Hz

  I bought this from Amazon, and it worked fine for a day or two. Now, when the computer shuts down or sleep the monitor turns on and has a signal, but the contrast and brightness are zero, I can raise them and discern the office, but the color is incorrect.

  This is part of a two-monitor display, the other monitor works fine.

  Did the hard reset, diagnostic on monitor, and diagnoses are normal.

   

   

  Get it exchanged.

• Supported dual monitor, Dell Dimension C521

  I am trying to upgrade my Dell Dimension C521 to enable bi-ecrans support.  My first approach was to buy a video card, hoping to use the VGA integrated with a low end ATI video card in the Slot PCI - E.  While the video card is well worked, by using the onboard VGA in conjunction with a video card is an "unsupported configuration". It is either / or situation, which means that a monitor at the same time.

  My second approach is to get a KFA2 GeForce 8400 GS graphics card, which seems to be one of the few that can be used in a low profile CPU and have a DVI and a VGA output. The problem, they do not work.  I say they, because I already tried two, and they both fail the same way: the computer seems to start up, but it is no output to the DVI cable.  If I plug the VGA cable and not on the DVI cable to the monitor, I just get a bunch of vertical lines on the monitor. I talked to a KFA technical support, although at first, they thought it would be a bad video card, they now think it might be related to the fact that power 280W does not meet the requirements of the Commission, which needs a minimum of a supply of 350W.

  It seems to me that there are a few options left:

  (1) find a video of lower power of cards that has two * real * outputs - DVI and VGA - (and not only replicated TV output). It will also take a low profile video card.  Any suggestions would be greatly appreciated.

  (2) upgrade of power supply 350W or more and use the 8400 GS graphics card. Unfortunately, Dell does not appear to make a more powerful PSU for the C521.  Is there power supplies for another half height Dell computers that might work?

  (3) as a last resort, a ditch the C521 and buy a more powerful computer.

  Are there options that I left out?

  Message edited by DrJJH on 09/23/2008 13:07
  
  

• HP 4183 cl - I want to turn my monitor off and same proximity laptop screen while listening to the music.

  I want to close my screen while listening to the music. I found the option to turn off the screen, but when I try to close the screen, it goes to standby mode.

  Please help me.

  Thank you.

  Check power in the Panel settings - there is a place where you can specify what happens when you close the lid.

• Insect caught in the monitor u2414Hb and support is a disaster. No service tag

  First of all the question I seek to solve. A small insect, probably a fly has managed to make its way into my monitor in any way. It became lodged between the Panel and an outer layer or in the Panel and quickly dies. And has been stuck in place for more than a month. Attempts to dislodge without disassembling the monitor failed.

  Now, AFAIK disassemble the monitor to clear it will void the warranty and risk of damage to the screen so I prefer to avoid. I decided to contact the Department of support or guarantee dell to see if we could do something on this end.

  The monitor was purchased new from NewEgg.com on 01/01/15, with an indicated 3 years manufacturer's warranty. So, it should always be in the manufacturers warranty period.

  Although none where Dells website, or via their telephone system you can contact the technical support or departments without a number of warranty service. My monitor does not have a serial number, and Dells own materials state clearly that stand-alone monitors sold prior to 2016 (like this one, in 2015, has bought manufactured 2014) do not always have a service key.

  I tried every number on my monitor and its box, both online and telephone assistance. A number search as a service on the Web site key (but not with the telephone assistance) and appears as a system of office since 1997.

  Telephone service has been terrible. Repeatedly asking a service key, even when I explained that I don't have not one. Repeatedly ask me about Dell computer system I bought it, despite my clear statement that my problem was equipped with a screen of stand-alone and that I was not the owner of a dell computer system. Repeatedly asking me a Dell order number, despite my stating clearly it was not purchased from Dell, but bought new from newegg.com. Repeatedly telling me to contact the seller (newegg) to some how get help as a guarantee of the manufacturer. They told me a serial number was unnecessary because millions of people had bought monitors with this serial number. As if this makes no sense at all. I was told that a product model could be used to find what product I was calling about. I was told no numbers appearing on my device, or on its original packaging (that I kept) could be found in any system. I was transferred to several operators in several services all followed the same scenario and giving the same spiel on the * service tag. Before an operator involved, I've been dishonest and has asked for my phone number. All this despite the pages of Dell support stating clearly that some of their products do not have a key support.

  It does not appear to be process at all to deal with Dell products manufactured and sold without this little number that supposedly so critical. Dell apparently cannot do anything with the model # and # series uses all manufacturers in the world.

  . Exactly how to make contact with the service the customer without a service key.

  And can do something about the dead bug that introduced itself in the center of my screen as a brown spot little? Or am I stuck risking the destruction of my monitor with a canceled warranty? It doesn't make sense that a bug should be frankly worm its way between the layers of the screen.

  Monitors without a number of service purchased from resellers (Amazon, Best Buy, Buy.com, cost Co, Wal-Mart, Sams, other boutique online, eBay, etc.)
  * Based on the start date of monitor 20 digit PPID number code, Dell will guarantee the monitor for 3 years for most monitors. There are exceptions (S2340M, S2340L, etc.) who had only 1 year warranty.
  * You must contact the Support of your country (1-866-618-2044 USA) by telephone. Tell them to open only one internal Dell Oracle knowledge Information Centre
  * In the search space, they should enter PNP13081, and then click search. This opens the article,
  "Replacement for the monitor Dell and procedure policy - political international Dell. They should read scenario 7

  Scenario 7 =.
  Discussion: The customer is unable to provide a Dell order number or monitor the Service tag number. The only information that the client has are the PPID 20 serial numbers for the monitor.
  Warranty: date 3 years from manufacturing monitor integrated in the PPID number 20 digits
  Replacement procedure: Implement the replacement of screen against the dummy tag

  * You would provide the following representative data if you need a replacement monitor in this 3-year period:
  Brick or shop online address and a copy of Bill of sale:
  Monitor model:
  Monitor 20 digits alphanumeric serial number PPID:
  [Your]
  E-mail address:
  Name:
  Shipping address:
  Phone number:
  Operating system:
  Video card:
  Video card ports tested:
  Question:
  Performed troubleshooting:
  Monitor the done Factory Reset
  Watch chess self-test Diagnostics and integrated
  * Post more troubleshooting

• Application of monitor Dell DDM with U2515H and U2412M dual screen setup and USB drive menu

  Hello

  I have U2515H and U2412M independently connected with DP cable to GTX960 video card.

  Two questions;

  1.

  I have the latest driver display and the last Application of monitor Dell DDM.  It detects U2515H OK but not U2412M.   necessary on the menu OSD is activated but still no go.    Is - this known issue?

  2.

  Also with U2515H, curiously section USB tab energy on screen Menu (the one who press the button) is grayed out.  Can not choose how the power of USB hub behave when the screen goes into sleep mode?    What cause this menu to be grayed out?    Factory reset has no effect on this menu item.

  Be aware that U2515H has been replaced by Dell last Friday with monitor construction January because the one originally, I got a defect on the bezel mounting, but this USB menu was selectable.   It was built in April/205.

  Thanks for the research.

  (Updated the model type edition only)

  There is no U2414M. Do you mean the U2412M? If so, the U2412M is not supported. It was an error in the web. DDM requires a year of Dell 2013 model year or newer.

  There is no U25125H or U2525H. Do you mean the U2515H? From the U2515H Manual page 41 =
  USB
  Allows you to enable or disable the USB function standby monitor.

  NOTE: USB power standby mode is available only when the USB upstream cable is disconnected. This option will be grayed out when the USB cable upstream traffic in.

• Dual monitor second dark screen

  I use a Setup dual monitor both monitors same accurate on my pc at the same time on the same exact settings and one of the screens is much darker that the other I tried switching on the cable with no result and have searched the Internet for the past hours searching for answers with no result, any help would be appreciated , I'm completely at a loss I'm 100% sure that it is not a monitor problem

  Hello

  The mother system/card manufacturer and support of the manufacturer of video cards and devices, online
  documentation and drivers and forums would be a good source of help and information.

  These should help:

  Connect the multiple monitor to your PC
  http://Windows.Microsoft.com/en-us/Windows-8/how-connect-multiple-monitors

  Do more with multiple monitors
  http://Windows.Microsoft.com/en-us/Windows-8/multiple-monitors

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• HP G42-415DX: in a Setup dual monitor, perhaps armored secondary monitor white screen?

  I have a Setup dual monitor, where the laptop is tied to a 2nd monitor (TV) via HDMI. I mainly use the 2nd monitor. Can I empty the 1st monitor (laptop screen) screen, yet still use the 2nd monitor with lid open to access the keyboard?

  (I noticed with parameters changed in the Panel of Win7, I can close the lid without cutting [sleep, Hibernate or shutdown] computer and had to lower the monitor display 2nd to adapt to the screen.) But to use the keyboard, open the lid of the portable computer, which involved the 1st screen)

  Thank you

  Hi Kalad,

  I think the same as you do sometimes, especially when I watch a movie and you want that it will display on the bigger screen and the simultaneouly have the laptop screen is off.

  As you need to use the keyboard of the laptop and want the second poster only, which suggests to select the "Projector" only option in the pop-up menu by pressing the Fn + F4 key.

  & to come back again having two screens or single screen press Fn Key & F4 on your keyboard and select "Extend" or 'Unplug the projector' options respectively.

  I am an employee of HP.

  Kind regards
  Mundutha

  Make it easier for others to find solutions, marking my answer "Accept as Solution" if it solves your problem.

  Click the "Thumbs up" button to the lower right side of my post to say thank you! ***.

• Dell MDS14 Dual Monitor Stand, Portrait orientation?

  Hi all there a Dell MDS14 Dual Monitor Stand. I just want to confirm if one of the monitors can be in portrait orientation?

  I want to mount one 24 inches horizontally and the other 24 inches in portrait mode.

  Thanks in advance.

  If anyone is interested, Yes, you can mount the monitor in portrait mode using the included vesa plate.

  All you need to do is fix the vesa plate in the necessary direction and fix.

  The only issue is that it adds about 5mm is not Ras if you align perfectly flat monitors horizontally.

  But if use you it like me and have a slight angle inward at the portrait screen it's a problem no.

  PS, if you need to rinse, you can always mount two monitors with vesa :) plate

• The main screen becomes secondary in a Setup dual monitor (DVI-HDMI)

  Original title: WINDOWS PROGRAMMERS: problem with OS Windows7 not being not able change the numbers of identifiers when using multiple screens and HDMI

  To be clear... This problem is with the Win7 OS - no video card GUI that allow to change number ID display on multiple monitors.

  Problem with several screens and the use of HDMI cables substituent and #1 assuming that for its corresponding display view identifier.

  Not always ID desired.

  But there is no way to change this.

  EXAMPLE:

  Monitor is configured as primary display (ID #1) using a DVI cable

  Then I connect my SONY Bravia or my LG HDTV displays using HDMI cables, the new screen automatically takes over as the display identifier #1 and the monitor becomes identifier #2.

  -This introduces to the identifiers is not something I want, need or want to deal with every time I use several displays. And it creates problems.

  There is NO way to correct or modify the identifiers.

  Please provide a FIX as soon as possible if you have an ounce of concern for the customer service.

  The solution can be as simple as:

  GO to THE control panel - appearance and customization - display - change display settings:

  Right CLICK... on one of the displays in the window to the left of "Detect" / "identify."

  Then the OPTION 'Change display login' with a list of relevant identifier numbers according to the number of multiple connected screens.

  Click 'apply '.

  CLICK ON 'OK '.

  and Voila! View identifiers are defined.

  WINDOWS:

  We, your customers, look forward to the difficulty of Windows update that contains this fix a lot expected and necessary.

  Thanks in advance for your collaboration and concerns about our satisfaction and ease of use than the loyal customers of your software.

  Feel free to send me the BETA version of the patch when his complete: * e-mail address is removed from the privacy *.

  Hi Jean-Pierre.

  Thank you for all the information related to the issue.

  This problem may occur if the display of the configuration settings dual monitor retain the configuration. Possible reasons could be installed on the computer outdated display driver.

  1. What is the brand and model of the computer or the graphics card?
  2. Are you using double display card? Sometimes changing the display settings for the display cards might solve the problem.

  First of all, if you have a display of the map or media panel installed on the computer, go to the control panel and change the setting under multiple display change. Assign the identity number according to the status monitor, then check if it retains the configuration when you restart the computer.

  Additionally, make sure that you have installed the latest version of the display driver for Windows 7 from the website of the manufacturer of the computer. Sometimes, if the driver is not being updated, the setting may not keep the entire installation. See the link to know how to update the driver on Windows 7:

  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

  Please keep us informed.

• HP 251-a123w: I have a Setup dual monitor using VGA and DVI - D ports?

  I want to connect my HP 22uh monitor to my office using a DVI - D to DVI - D configuration.  Then I would like to complete a Setup dual monitor by connecting an Acer X193w monitor to my office using a VGA VGA configuration.

  Is this possible?  Two ports on my desktop computer can be used at the same time to support dual monitor?

  I see that the cables double monitor are in the form of Y and I thought that maybe a single port may be used simultaneously.  If someone knew this information then it would save some time & money on experimentation...

  Monitor HP 22uh was bundled with my new desktop PC and I cleaned the Acer to my now deceased Vista system.  It is in very good condition, would like to add.

  LSUfan71

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post about the use of the video taken two DVI and VGA and wanted to help.

  According to the technical specifications of HP for your PC, both of these jacks can be used at the same time.
  
  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• When I have an icon on the second screen of my two monitors, it opens on the primary monitor first, and I have to drag it.

  Is it possible for me to make the window open only the screen that I opened in?

  Hello

  What operating system do you use?

  If you use windows7, I suggest you to follow the links and check out them.

  Setting up dual monitor: two screens are better than one

  http://www.Microsoft.com/athome/organization/twomonitors.aspx

  Move windows between multiple monitors

  http://Windows.Microsoft.com/en-us/Windows7/move-Windows-between-multiple-monitors

  Change icons appear in the notification area

  http://Windows.Microsoft.com/en-us/Windows7/change-how-icons-appear-in-the-notification-area