dual monitor

Similar Questions

• Dual monitor problems / external

  I recently bought a netbook NB200/007 and want to use two monitors (mainly for display of pictures etc on larger screens)

  It came preloaded with Windows 7 starter, after having found that the Starter edition did not support dual monitor that I've upgraded to Windows 7 Home Premium, but I'm still not yet to make it work.

  When the external monitor is connected, the netbook picks it up and sets up two monitors, but the external screen does not light (it remains in standby mode) I tried several different resolutions and also tried to use the external monitor as a single screen by selecting the option to have it as my main screen.

  If anyone has a suggestion of how I could get it to work, I would greatly appreciate.

  Kind regards.

  Hi puma325,
  install the 'value added package.
  This will add some features like "Fn + F5" for switching the display...

• HP Compaq dx2000 format Microtour - upgrading graphic support dual monitor?

  Hi, I have a question about the HP Compaq dx2000 format Microtour. The link to the form is here:

  http://h20000.www2.HP.com/bizsupport/TechSupport/DocumentIndex.jsp?lang=en&cc=us&ContentType=support...

  I was asked to provide a solution for this machine that will support dual monitor. Can someone tell me please on a possible graphics card I buy (probably second-hand) that will be compatible with the motherboard on this machine and will also support dual monitor?

  Thank you very much!

  Paul

  Hello:

  If you only run XP and don't have no plan to upgrade to Windows Vista or Windows 7 and just VGA (not DVI) output, this PCI video card should work for you, and your machine has only PCI slots.

  http://www.eBay.com/ITM/PNY-nvidia-fx5200-Dual-VGA-DDR-256MB-video-card-PCI-/160704820819?PT=PCC_Video_TV_Cards&hash=item256ac0f653

  You will need to read the installation manual on the support page and the driver of your PC because I believe that you need to change a setting in the BIOS to the PCI card to the video card main.

  Or you can search for a similar PCI card with a DMS-59 output with video split cable that goes to two monitors.

  Paul

• E-mail and calendar will not connect on a dual monitor system.

  I have a MacBook Pro (15-inch, mid-2012) running on Yosemite 10.10.5.  I currently have a system of dual monitor hooked up with an Acer monitor (version: AL1916W Abd ~ Jan. 2008).  When I use this monitor as Desktop 2 and move my apps to email and calendar to this office, I suddenly find that mail will not receive any new messages very well and the calendar will often lose the connection and does not update to mobile.  I thought maybe of interference on the WiFi, but Google Chrome runs on the desktop at the same speed as on my laptop.  Perhaps it is still a form of interference, but I don't know what is the cause or how to fix it.  Perhaps the monitor is too old and now is not compatible with my operating system?  The monitor is connected with a VGA XAVIER to converter Thunderbolt and a VGA cable normal VGA.

  The internet I use is the internet at the University where I work, so reset the router or something like that is not an option.  Help?

  Please open the Mission control pane in system preferences and uncheck the box marked

  Viewers have separate spaces

  Log off or restart the computer.

• HP 251-a123w: I have a Setup dual monitor using VGA and DVI - D ports?

  I want to connect my HP 22uh monitor to my office using a DVI - D to DVI - D configuration.  Then I would like to complete a Setup dual monitor by connecting an Acer X193w monitor to my office using a VGA VGA configuration.

  Is this possible?  Two ports on my desktop computer can be used at the same time to support dual monitor?

  I see that the cables double monitor are in the form of Y and I thought that maybe a single port may be used simultaneously.  If someone knew this information then it would save some time & money on experimentation...

  Monitor HP 22uh was bundled with my new desktop PC and I cleaned the Acer to my now deceased Vista system.  It is in very good condition, would like to add.

  LSUfan71

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post about the use of the video taken two DVI and VGA and wanted to help.

  According to the technical specifications of HP for your PC, both of these jacks can be used at the same time.
  
  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Dual monitor on HP Pavilion p6610f

  I would use two monitors on my HP Pavilion p6610f desktop computer.  I have two lcd monitors.   I buy a vga adapter digital and connected a monitor to the VGA in the back of the computer and plugged the adapter connected to the other lcd screen in the digital output on the back of the computer. The monitor connected to the digital output signals no signal.

  Can I use a Setup dual monitor on a pavilion p6610f using video output that is on the motherboard, or do I need an additional video card?

  Thank you

  cardsinstl

  Hello

  The monitor which does not have a DVI port?  What make and model of the monitor does not work?

  Sending a digital signal to an analog monitor won't work.

• Graphics card dual monitor will fit in an HP Pavilion Slimline s3600z

  I need to run two monitors to my HP Pavilion Slimline s3600z.

  My OS is Windows Vista 64 bit.

  I'm not a gamer; I teach in virtual classes and need to spread out the screen on two monitors.

  My graphics card is NVIDIA GeForce 9300 GE.

  The card offers the ability to set multiple views, so I bought a splitter.

  Unfortunately, this does solve the problem.

  I bought a low profile with two connections graphics card, but it was too big for the case.

  Is there a card dual monitor low profile that fits the business slimline?

  Here are the specifications of your HP CTO Slimline s3600z desktop. According to specifications, your computer has a power of 160 watts. This power supply is unlikely to fuel a retail graphics card. The simplest method to use two screens with your computer is probably a adapter USB-to-video EVGA + 19.

  Frank

• Dual monitor second dark screen

  I use a Setup dual monitor both monitors same accurate on my pc at the same time on the same exact settings and one of the screens is much darker that the other I tried switching on the cable with no result and have searched the Internet for the past hours searching for answers with no result, any help would be appreciated , I'm completely at a loss I'm 100% sure that it is not a monitor problem

  Hello

  The mother system/card manufacturer and support of the manufacturer of video cards and devices, online
  documentation and drivers and forums would be a good source of help and information.

  These should help:

  Connect the multiple monitor to your PC
  http://Windows.Microsoft.com/en-us/Windows-8/how-connect-multiple-monitors

  Do more with multiple monitors
  http://Windows.Microsoft.com/en-us/Windows-8/multiple-monitors

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Do I need a dedicated video card to run a Setup dual monitor with HP 700-327c?

  Recently replaced an old HP Desktop with the envy of 700 running Windows 7 Professional.

  Old facility had a Setup to dual monitor with a video card that had two monitors - one HDMI and a DVI connectors.  The standard connectors on the old PC were VGA and DVI, but both have been capped to prevent use.

  I wanted to set up monitors on this new PC to do the same thing and wanted to know if a video card with the two input connectors dedicated was the best set-up or simply use a mute adapter for VGA or DVI on the new PC ports.  The new PC has two video connectors standard - one VGA and one DVI currently.

  FYI: Using an Intel i7-4770 with 16 GB of RAM and a video card using an Intel HD Graphics 4600.

  An update as promised - not a problem - used another cord with the right connector and setting up monitors using Windows device settings and they work perfectly.  No need for a separate or higher video card as I am not in the game application for video features.  Thanks BH.

• How to install dual monitors in Windows XP?

  Original title: I have more xp dell. Two monitors. A video card plus double the original video card. How can I get my TV wired to computer with s-video plug in? Thank you

  I installed the dual video card. I got hooked tv before but unplugged & cannot get hooked again.

  Hi Ben,

  Thanks for posting your question in the Microsoft Community.

  From your problem description, I understand that you cannot configure both monitors. Please let me know if this isn't the problem that you are experiencing.

  Before troubleshooting, I have little information on the issue.

  Did you of recent changes to the computer before this problem?

  Try the methods provided for in article below and then check after each method:

  Setting up dual monitor:

  http://www.Microsoft.com/athome/organization/twomonitors.aspx#fBid=1bZqH23uobu

  If the problem persists, post your reply with results and questions above. We are happy to help you with the advanced troubleshooting steps.

  It will be useful.

• HP G42-415DX: in a Setup dual monitor, perhaps armored secondary monitor white screen?

  I have a Setup dual monitor, where the laptop is tied to a 2nd monitor (TV) via HDMI. I mainly use the 2nd monitor. Can I empty the 1st monitor (laptop screen) screen, yet still use the 2nd monitor with lid open to access the keyboard?

  (I noticed with parameters changed in the Panel of Win7, I can close the lid without cutting [sleep, Hibernate or shutdown] computer and had to lower the monitor display 2nd to adapt to the screen.) But to use the keyboard, open the lid of the portable computer, which involved the 1st screen)

  Thank you

  Hi Kalad,

  I think the same as you do sometimes, especially when I watch a movie and you want that it will display on the bigger screen and the simultaneouly have the laptop screen is off.

  As you need to use the keyboard of the laptop and want the second poster only, which suggests to select the "Projector" only option in the pop-up menu by pressing the Fn + F4 key.

  & to come back again having two screens or single screen press Fn Key & F4 on your keyboard and select "Extend" or 'Unplug the projector' options respectively.

  I am an employee of HP.

  Kind regards
  Mundutha

  Make it easier for others to find solutions, marking my answer "Accept as Solution" if it solves your problem.

  Click the "Thumbs up" button to the lower right side of my post to say thank you! ***.

• Dual monitor displays time #1 & 2 in 1. How can I fix it?

  While trying to set up multiple monitors, I realized #2 is not activated, then when I identified the two say #1.

  I've read this before, but can't remember how to fix it. I have readit was in initial Setup, which I just got.

  Help, please!

  Hello

  You can re-setup two monitors this link & check if the problem persists:

  How to configure and use multiple monitors in Windows XP?

  Reference: Setup dual monitor: two screens are better than one

  Hope the helps of information.

• How to hide the icon of Timbuktu pro, if you use a dual monitor?

  Original title: TIMBUKTU Pro

  Hello

  Is it possible to hide the icon of TIMBUKTU Pro, if you use a dual monitor?
  Either way, TIMBUKTU Pro is a program to monitor a machine without noticing that they are under surveillance.
  Thank you.
  Kind regards
  tan111

  Hello

  I "d suggest that you contact the manufacturer for the best help on the issue.

  http://www.Netopia.com/software/products/TB2/win/

• The dual monitor settings not remembered

  I just added a second monitor (same size and resolution as the first monitor). After using "personalize > display settings", activating the second monitor in the mode double screen, monitor the position and resolution, then selecting "apply > Save Settings > OK" the new monitor will work fine. However, when I restart the PC, Windows knows more on the second monitor and I have to redo all the settings more. It's ALWAYS happening (and not sporadically). I've never had this happen before in configurations dual monitor. I don't do something correctly?

  I'm under Windows Vista Ultimate 64-bit, 2-24 "1920 x 1280 Digital monitors, graphic adapter advanced ATI HD 4850 with dual output DVI, 8 GB of memory.

  Thanks in advance for any help!

  Jon

  Jon,
  Download ATI Catalyst Control Center, which includes the updated drivers for your card, of the following:
  http://game.AMD.com/us-en/drivers_catalyst.aspx?p=Vista64/common-Vista64

  After installing the software and restarted, you can access their software by clicking on start-> all programs-> Catalyst Control Center, click on CCC
  Then adjust your settings of dual monitor since the display under chart type Manager, here you can set the desktop, the refresh rate resolution and you want 1 of a possible 5 modes (press F1 to get help with their applicaton) display. Make sure that save you after having selected the desired configuration. Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems with dual monitor: VGA is out only work

  I have a dual monitor card galaxy geforce gf430 who worked on Sunday night before putting the computer to sleep. When I came back Wednesday on the side of the hdmi/vga/dvi vga worked the only possible output. After having checked all the settings and the cables and update of my computer, I had more than one screen. I went out and bought an asus hd 6450 and installed in the hope that I would have my screen. no luck I checked all the settings again and nothing. I ran the program provided with the card and so far nothing. It is not even read a different location for the screen. can someone please?
  Operating system
  MS Windows Vista Home Premium 32 bit SP2
  CENTRAL PROCESSING UNIT
  AMD Phenom X 3 8400 42 ° C
  Tolimán 65nm technology
  RAM
  1.50 GB Dual-Channel DDR2 @ 267 MHz (4-4-4-12)
  Motherboard
  ASUSTek Computer Inc. NARRA3 (Socket AM2) 44 ° c.
  Graphics
  Monitor Non Plug-and-Play generic (1024x768@60Hz)
  ASUS EAH6450 series (ASUStek Computer Inc.) 50 ° C
  Hard drives
  625 GB Western Digital WDC WD64 00AAKS-65A7B SCSI Disk Device (fiber)
  Optical drives
  ATAPI DVD A DH16A3L SCSI CdRom Device
  Audio
  Realtek High Definition Audio

  I took the liberty to do a little research on the ASUS HD 6450 map.  Are - what you got to get the ASUS HD6450 silent and low GPU or the bigger one with the fan?  It might be possible that those silent will not support Eyefinity technology since it was modeled for the home theater PC use.

  I noticed that the model with the fan on the radiator mentions he is compatible Eyefinity, while the silent model does not work, but it allows you to choose between a VGA, DVI or HDMI port, but do not use them simultaneously.

• Dual monitor - not compatible with this signal TV

  original title: dual monitor

  Hello!

  I connected my laptop to my LCD TV and chose the option to only display on the external monitor.  Unfortunately I get the error message on my TV "not compatible with this signal.  Because it does not work and I can't see I can't change all the options in the display configuration.  How can I restore my original settings so that when I connect to my TV the picture is displayed on my laptop?

  Thank you in advance for your help!

  XO steph

  Try typing the F8 key before Windows starts to appear in the start menu and select this option to start safe mode.  Make the changes to the view that you need to save and restart.  You can also try to plug an external monitor instead of your TV to see if you can see a picture then and make the necessary changes.

  "scaro013" wrote in the new message: * e-mail address is removed from the privacy... *

  Hello!

  I connected my laptop to my LCD TV and chose the option to only display on the external monitor.  Unfortunately I get the error message on my TV "not compatible with this signal.  Because it does not work and I can't see I can't change all the options in the display configuration.  How can I restore my original settings so that when I connect to my TV the picture is displayed on my laptop?

  Thank you in advance for your help!

  XO steph