During HotSync problem

Similar Questions

• motorcycle g, heating during calls problem

  How can I stop bike g third-generation phone to heat as the iron during a call?
  
  Additional information: 1. He has spent time in motorcycle duringsleep-game.
  
  2. He gave me blister on my face.

  If this happens on all phone calls, I suggest that you go in safe mode and test the call there. If you can't find hot, then you have a rogue application which is causing your problem.

  Please also asked what crystallet. Thank you and I hope this helps

• IR hotsync problem: "because the port is in use by another application."

  I finally got my system operation.  Sony Clie TJ - 25 pda, Palm Desktop 4.1, Windows 7 64 bit.  Very delicate balance.  I failed to install the new software released by aceeca.  I finally got it by infrared hotsync.  Several times.

  Now, today, I get the message on the Clie: "could not start the hotsync operation because the port is in use by another application."

  I saw this thread and in fact ensure that the transfer of images using a digital camera box is unchecked.  It still does not.  The icon hotsync in the lower right part of the screen, when I check that IR is checked, nothing else is.  It still does not.

  Thoughts?  Ideas?  Suggestions?

  Cidercat I had this happen to me with bluetooth hotsync before. I listen to radio, transfer files and surf the web with bluetooth. I could solve the problem by turning off the bluetooth, then turn it back on. Sometimes a warm reboot might also work. I came across a free application for the Palm tree named NetworkDown. It closes completely all active sessions down. You type right on the icon to run it. It works on my TX.

  http://www.metaviewsoft.de/en/software/PalmOS/freeware/other/NetworkDown.PRC

• HotSync problem, no contacts or calendar syncs on Treo 755 p. Help!

  I tried to hotsync my Treo but can hotsync everything except contacts and the calendar on my laptop running XP.  How can I get the contacts/calendar sync?

  The problem is more complicated.  I was able to synchronize only once when I got the last Treo Sept 2007.  If new data (Contacts/Calendar) since then cannot not be sync between the Treo & laptop.

  Photos & tasks & memos synchronize successfully, however.

  Now my screen is cracked.  I have a new TReo, but Service of Sprint could not extract data more because they have said that the screen is cracked.  I am told he is only average sync old Treo, and then synchronize the new Treo to get the data.  Because I can't have my old Treo to sync contacts/calendar for the past year, I'm afraid all of my data is LOST!  Help, please!

  Thank you very much for answering.  I really appreciate it.  Because no one responded, I decided that I had to solve this problem myself 2 nights ago.  I just finally figured this out after staying up to 4 hours after midnight searching for the answer online & after going back & forth between the old cracked Treo to retrieve data & download on the new Treo.  I also called the Sprint technical support at 03:00.  I didn't know that you can call Sprint for it!  The Sprint Lady said the same thing after that I thought about it.

  I also found that you can remove the EAS account in your Palm Desktop on your laptop on the Hotsync menu, Custom, and then change the VersaMail conduit.  Once you click on the change in the VersaMail, you have the ability to delete accounts. (I found online of the ways more complex to remove Regional service accounts using the Treo, which he did not work for me).

  Once the EAS is removed from the desktop, make sure files synchronization is enabled in the VersaMail conduit to allow this info in the past for the Treo.

  However, I also had to play with the lines of contacts because it is automatically extracted from "doing nothing" until the EAS account is deleted in the Treo.  It took a few tries, but it worked.

  The downside is that it reproduces all the hundreds of contacts I had currently on the Palm Desktop on the computer.  I so had to go and manually remove duplicates & then Resync.  That's why it took hours.  Just go back & suite.

  Thank you very much for answering!

  Message is about: Treo 755 p (Sprint)

• Vitsa 64 Hotsync problem (3rd time)

  What no other body has ever had this problem?  Appears so because no one answers.  Well here it is again.

  Palm 755 p, Vista 64-bit notebook PC, HotSync manager 7.0.2 PalmDesktop 6.2.2 DocsToGo 11.0. When I HotSync the Palm to PC via bluetooth, not only don't HotSync crash if there are a lot of documents selected for synchronization, HotSync wants to create a new document with a name that has been added with name_1 or name1, even if there is a document on the Palm and the PC with the same exact name. How can I get HotSync to understand that I want just to sync my Palm with PC using the same name? And why HotSync crash when several documants are selected for synchronization?

  Thank you...

• Bluetooth HotSync problem

  I can't do this job (not the least of my problems is that the instructions available in the link that I found on this forum (ts = Palm_External2001, case, k = PalmSupportKB and http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE?New = obj(21382)))

  not reflect the new HotSync 7.02.

  I bought a Bluetooth USB Dongle (Interlink Nano Bluetooth Class 2 Dongle VP6494 by SMK-Link). I installed the Dongle, then I followed the instructions to set up my 755 p. When I look at the Bluetooth software on my laptop, it shows the ID hotsync of my 755 p (right?) when I had the 755 p check out the adapter bluetooth on my laptop, she found too (great! right?). I chose my laptop as the mode of synchronization (below the synch button) for the 755 p, then pressed synch. I get a message saying "Connection with the desktop using laptop computer" (the name I gave the bluetooth device on my laptop) it sits there for several minutes, then gives me the "the connection between your handheld computer and the desktop could not be established. "Message if please check your configuration and try again. I don't know what to try next. Any ideas?

  Have you changed the type of Bluetooth connection instead of sync cable?

  http://KB.Palm.com and enter the number article 41559

  Message relates to: None

• USB (series VISA) during reset problem

  Hello

  Immediately to the problem that I'm using communications series in labview with microcntroller. Anyway, whenever I connect the USB cable then Labview detects the port and make the communication. But in the average process if I press delivery to ZERO (lost USB) button on the microcontroller then block visa series get the error and program continues to generate the final error with the code. By the way, this happens when ever I want to confirm the user that USB is disconnected or RESET is pressed. Also if you reconnect the USB at the back, then the program should work as usual. Even I tried with error display VI in the programming menu, but I hope it's wrong way. Finally, I would like to correct two things 1) if RESET is pressed to halfway, then it must show a perceptible message from the user. (2) the USb disconnected by person unknown so what can I do in this situation.

  I'm using LABVIEW 2009. Please help me.

  You can try something similar to the following. However, I would recommend against it because I found that LabVIEW generated errors are very useful for troubleshooting. Message/code often your own mistakes to mask the problems that will be easy to understand if you have the LabVIEW error.

  

• Palm Zire Hotsync problems

  Old Zire on Vista o/s computer.  While improving the old Palm software, I lost all the data on the desktop.  When Hotsynching my pocket with the new software (ACCESS) computer, all failed.  So I uninstalled the new software (ACCESS) and reinstalled the old Zire software from the CD I have.  It took some time, and then sent me error messages had not transferred data, contacts, etc..  Audit of the Office confirmed later.  Nothing there.  No help from the Palm.  Someone has any idea how to solve this problem?

  Have you read the sticky post above titled "Win7 and Vista sync instructions...". ».

  You have installed the file PalmHotsyncsetup of Pimlico software?  I guess that could be the problem if it is not installed.

  WyreNut

• Vista & Desktop 6.2 & 7.0 Hotsync problem

  I just bought a new Vista machine and I've tried to install the versions of Vista (6.2) Desktop and Hotsync (7.0), but when I get to the point where the installation is asking me to press the Sync button on my cable, Vista seems unable to locate the driver. Does anyone have a solution for this?

  I am in the same situation as you.  What I found is the there is not a USB driver for the Palm for Vista 64-bit platform.  Without this box, you will be unable to synchronize via USB.

  What I've found, is that Bluetooth is supported.  I have a USB Bluetooth adapter (~ $ 20) and used on my computer and set up my Palm to make a Bluetooth Hotsync.  It worked fine under Vista 64-bit.

  Message relates to: Centro (Verizon)

• 3 Palm hotsync problem

  I just got a Palm 3 last night and tried to hotsync since then. I tried chat Palm which did not help someone in this forum can guide me. I have xp home edition on a dell demision.

  When I try to hotsync, it says cannot communicate with my computer or the modem not hung. I think I need to make sure that my Palms reads the correct port to office? IF it is correct how do that?

  Any help will be appreciated. If my message is meaningless I will correct it when I get home from work. My Palm came with a disc, but I used it I used Palm download program, the disc does not load for some reason when I place it in the disc tray.

  Thank you

  Red.

  Thanks for all the help. I got this job do not ask me how.

  Message relates to: Palm III

• Zire HotSync problems

  I have a Zire m150 I mainly used as an address book. All was well with HotSynching my Zire with my laptop XP Home until two things happened. My husband bought me a new PC with XP Pro and I realized that my Zire battery was totally dead. So I recharged the battery and it seems that I've lost all addresses. Then I tried to HotSync the Zire with my XP Home on my old laptop. The Zire goes through all the steps for HotSync and said that everything is synchronized, but when I check it, there is nothing of the laptop. No address on my Zire. It seems it would be easy to HotSync my Zire with my old laptop, and then HotSync with my new PC. Help! I'm so frustrated and don't want to retype all those addresses! I'm not particularly tech fan, but may well follow the directions! Thanks for any help.

  First of all allows to check and see if you have more than one username in Palm Desktop. To make this opening Palm Desktop and in the upper right corner, you should see a user name. Click the menu drop down and see if there is more than one. If If hard reset your device by going here http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=887. Then re-sync and when it asks you to choose the username that has your address in Palm Desktop.

  If this is not the case, go next to your clock on your PC and look for the hotsync Manager. Do a right click on it and go to custom. Then go to the address or contacts. And select Edit. Do the so-called Office replaces handheld. It will have an arrow pointing from the computer to a device. Be sure it's from the PC to the device. If it is the opposite case, it will delete all your data from your PC. Synchronize and see if your data is there.

  Post back if you have any other questions.

  Message is about: Treo 800w (Sprint)

• Calendar not sych during HotSync

  I have a Tungsten E2, using Windows XP Home Edition and the latest office 4.X software. When I perform a HotSync it crashes when you try to synchronize calendar files. It appears in the race, but light for 30 minutes and when I try to cancel the operation, Windows says that the program is not responding. If I customize hot Synchronization Manager to doing nothing with the calendar files, the hotsync operation completed without cumulative. I do not use Outlook or other calendar program. Any ideas? Thank you.

  DrF

  I deleted the files in the folder of the agenda and then do a HotSync with Pocket crushing office. Who restored the handheld calendar. Then, I entered a few appointments both in the office and the palm and performed a HotSync sync files. IT WORKED! Of course, the Office database must have been corrupted and since I don't have any old data is perfect. Thanks for the help!

  Message relates to: Tungsten E2

• HotSync problems with Vista 64 & Tungsten E2

  Running win Vista 64 & have a Tungsten E2 - cannot HotSync over bluetooth. Download Palm Desktop 6.2 and computer is bluetooth compatible. One, I noticed is that "bluetooth" is not an option in the window connections HotSync (the only choices are USB, network and series)-l' one of the choices should not Bluetooth? If so, how can I bluetooth as a choice?

  All ideas, thoughts on how to connect?

  Thank you

  Chris

  After many hours of reading the discussions in all these conversations - the hot sync finally worked.

  Lessons learned

  (a) make a complete ' clean uninstall software palm "-see various discussions on how to complete

  (b) uninstall Bluetooth if already installed

  (c) re - install Bluetooth (in my case was a dongle from Kensington) and let Windows applies the correct drivers * DO NOT install the software from the CD with the dongle *.

  (d) re - install the Palm software

  In Hot Sync - I now have the box Bluetooth connections and followed by notes prescriped within Palm Assistance.

  Worked like a charm. Solved!

  System - Vista 64-bit

  Tungsten E2 Palm

  The road to the next issue of Vista!

• recognition of the camera during attachment problem

  New Macbook Pro won't recognize my Nikon 700/800, trying to tie. Old laptop did great.

  Yes, you should be able to attach it on the latest version of Lightroom.

• Problems HotSync - Bluetooth option missing in connections

  After installing Windows 7 RC, 64-bit, I had to HotSync my Tungsten E2 with Bluetooth, rather than use the cable.  I bought and installed an Azio Bluetooth dongle (and included the Toshiba Bluetooth software) without a hitch. However, when I created my HotSync options I found that I couldn't choose Bluetooth because the option was not simply present on HotSync Manager/connections.  VERY frustrating.

  Buried deep in a another thread on this forum was the solution: go to control panel | Programs, remove the Bluetooth drivers and restart.  The device is installed with the Windows drivers again.  As if by magic, the Bluetooth option appeared on the HotSync Manager Connections window and everything was good.

  Of course, some computers come with the included Bluetooth option.  For those with x 64 Windows AND have the third-party Bluetooth drivers (other than Windows) AND are having HotSync problems because there is no way to activate the Bluetooth option, the hotfix may be similar - uninstall the drivers and use the native Windows drivers instead.

  I suspect that this issue can come down more, that those who do not always have HotSynced with Bluetooth is now required to do it because they are moved to x 64 Vista or Windows 7.  Palm does not have this problem on one of their pages to support - that I could find.

  YES!  It worked for me: "buried deep in a another thread on this forum was the solution: go to control panel | Programs, remove the Bluetooth drivers and restart.  The device is installed with the Windows drivers again.  As if by magic, the Bluetooth option appeared on the HotSync Manager Connections window and everything was good."

  THANK YOU SO MUCH!