Zire HotSync problems

Similar Questions

• Palm Zire Hotsync problems

  Old Zire on Vista o/s computer.  While improving the old Palm software, I lost all the data on the desktop.  When Hotsynching my pocket with the new software (ACCESS) computer, all failed.  So I uninstalled the new software (ACCESS) and reinstalled the old Zire software from the CD I have.  It took some time, and then sent me error messages had not transferred data, contacts, etc..  Audit of the Office confirmed later.  Nothing there.  No help from the Palm.  Someone has any idea how to solve this problem?

  Have you read the sticky post above titled "Win7 and Vista sync instructions...". ».

  You have installed the file PalmHotsyncsetup of Pimlico software?  I guess that could be the problem if it is not installed.

  WyreNut

• IR hotsync problem: "because the port is in use by another application."

  I finally got my system operation.  Sony Clie TJ - 25 pda, Palm Desktop 4.1, Windows 7 64 bit.  Very delicate balance.  I failed to install the new software released by aceeca.  I finally got it by infrared hotsync.  Several times.

  Now, today, I get the message on the Clie: "could not start the hotsync operation because the port is in use by another application."

  I saw this thread and in fact ensure that the transfer of images using a digital camera box is unchecked.  It still does not.  The icon hotsync in the lower right part of the screen, when I check that IR is checked, nothing else is.  It still does not.

  Thoughts?  Ideas?  Suggestions?

  Cidercat I had this happen to me with bluetooth hotsync before. I listen to radio, transfer files and surf the web with bluetooth. I could solve the problem by turning off the bluetooth, then turn it back on. Sometimes a warm reboot might also work. I came across a free application for the Palm tree named NetworkDown. It closes completely all active sessions down. You type right on the icon to run it. It works on my TX.

  http://www.metaviewsoft.de/en/software/PalmOS/freeware/other/NetworkDown.PRC

• HotSync problem, no contacts or calendar syncs on Treo 755 p. Help!

  I tried to hotsync my Treo but can hotsync everything except contacts and the calendar on my laptop running XP.  How can I get the contacts/calendar sync?

  The problem is more complicated.  I was able to synchronize only once when I got the last Treo Sept 2007.  If new data (Contacts/Calendar) since then cannot not be sync between the Treo & laptop.

  Photos & tasks & memos synchronize successfully, however.

  Now my screen is cracked.  I have a new TReo, but Service of Sprint could not extract data more because they have said that the screen is cracked.  I am told he is only average sync old Treo, and then synchronize the new Treo to get the data.  Because I can't have my old Treo to sync contacts/calendar for the past year, I'm afraid all of my data is LOST!  Help, please!

  Thank you very much for answering.  I really appreciate it.  Because no one responded, I decided that I had to solve this problem myself 2 nights ago.  I just finally figured this out after staying up to 4 hours after midnight searching for the answer online & after going back & forth between the old cracked Treo to retrieve data & download on the new Treo.  I also called the Sprint technical support at 03:00.  I didn't know that you can call Sprint for it!  The Sprint Lady said the same thing after that I thought about it.

  I also found that you can remove the EAS account in your Palm Desktop on your laptop on the Hotsync menu, Custom, and then change the VersaMail conduit.  Once you click on the change in the VersaMail, you have the ability to delete accounts. (I found online of the ways more complex to remove Regional service accounts using the Treo, which he did not work for me).

  Once the EAS is removed from the desktop, make sure files synchronization is enabled in the VersaMail conduit to allow this info in the past for the Treo.

  However, I also had to play with the lines of contacts because it is automatically extracted from "doing nothing" until the EAS account is deleted in the Treo.  It took a few tries, but it worked.

  The downside is that it reproduces all the hundreds of contacts I had currently on the Palm Desktop on the computer.  I so had to go and manually remove duplicates & then Resync.  That's why it took hours.  Just go back & suite.

  Thank you very much for answering!

  Message is about: Treo 755 p (Sprint)

• Vitsa 64 Hotsync problem (3rd time)

  What no other body has ever had this problem?  Appears so because no one answers.  Well here it is again.

  Palm 755 p, Vista 64-bit notebook PC, HotSync manager 7.0.2 PalmDesktop 6.2.2 DocsToGo 11.0. When I HotSync the Palm to PC via bluetooth, not only don't HotSync crash if there are a lot of documents selected for synchronization, HotSync wants to create a new document with a name that has been added with name_1 or name1, even if there is a document on the Palm and the PC with the same exact name. How can I get HotSync to understand that I want just to sync my Palm with PC using the same name? And why HotSync crash when several documants are selected for synchronization?

  Thank you...

• Bluetooth HotSync problem

  I can't do this job (not the least of my problems is that the instructions available in the link that I found on this forum (ts = Palm_External2001, case, k = PalmSupportKB and http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE?New = obj(21382)))

  not reflect the new HotSync 7.02.

  I bought a Bluetooth USB Dongle (Interlink Nano Bluetooth Class 2 Dongle VP6494 by SMK-Link). I installed the Dongle, then I followed the instructions to set up my 755 p. When I look at the Bluetooth software on my laptop, it shows the ID hotsync of my 755 p (right?) when I had the 755 p check out the adapter bluetooth on my laptop, she found too (great! right?). I chose my laptop as the mode of synchronization (below the synch button) for the 755 p, then pressed synch. I get a message saying "Connection with the desktop using laptop computer" (the name I gave the bluetooth device on my laptop) it sits there for several minutes, then gives me the "the connection between your handheld computer and the desktop could not be established. "Message if please check your configuration and try again. I don't know what to try next. Any ideas?

  Have you changed the type of Bluetooth connection instead of sync cable?

  http://KB.Palm.com and enter the number article 41559

  Message relates to: None

• During HotSync problem

  It's on my desktop in XP, when I try to HotSync, I get the following:

  Cannot install the file: Video2.avi map SecureDigital (SD) (0 x 10006410)

  Install the map of synchronization failed

  HotSync failed connection is lost

  I do not have a video2.avi file on my computer

  Hot sync locked my Palm and I have to reset over and over again.

  I cannot hot sync.

  Help

  George

  It seems that the file video2.avi is trying to install on your handheld.  Go to your Start button, find the Palm application file and select quick installation Palm.  See if there isn't something in the install window... If Yes, remove it.

  Message relates to: Centro (AT & T)

• Vista & Desktop 6.2 & 7.0 Hotsync problem

  I just bought a new Vista machine and I've tried to install the versions of Vista (6.2) Desktop and Hotsync (7.0), but when I get to the point where the installation is asking me to press the Sync button on my cable, Vista seems unable to locate the driver. Does anyone have a solution for this?

  I am in the same situation as you.  What I found is the there is not a USB driver for the Palm for Vista 64-bit platform.  Without this box, you will be unable to synchronize via USB.

  What I've found, is that Bluetooth is supported.  I have a USB Bluetooth adapter (~ $ 20) and used on my computer and set up my Palm to make a Bluetooth Hotsync.  It worked fine under Vista 64-bit.

  Message relates to: Centro (Verizon)

• 3 Palm hotsync problem

  I just got a Palm 3 last night and tried to hotsync since then. I tried chat Palm which did not help someone in this forum can guide me. I have xp home edition on a dell demision.

  When I try to hotsync, it says cannot communicate with my computer or the modem not hung. I think I need to make sure that my Palms reads the correct port to office? IF it is correct how do that?

  Any help will be appreciated. If my message is meaningless I will correct it when I get home from work. My Palm came with a disc, but I used it I used Palm download program, the disc does not load for some reason when I place it in the disc tray.

  Thank you

  Red.

  Thanks for all the help. I got this job do not ask me how.

  Message relates to: Palm III

• Zire 21 problems with users of Vista-not?

  Hello. When I open Palm Desktop, he invites me to select a user, but it is not a he. I tried to reinstall my software palm several times. the strange thing is that during my first installation of Palm Desktop, it worked fine, but then I re-installed to have it synchronize with outlook, too, and then it stopped working and I have problems that I have just mentioned. Any suggestions, anyone?

  Try to remove the palmOne folder to C:\Program Files\ then put it back. * IT ERASES ALL YOUR DATA ON THE DESKTOP! *

  Message relates to: Tungsten C

• HotSync problems with Vista 64 & Tungsten E2

  Running win Vista 64 & have a Tungsten E2 - cannot HotSync over bluetooth. Download Palm Desktop 6.2 and computer is bluetooth compatible. One, I noticed is that "bluetooth" is not an option in the window connections HotSync (the only choices are USB, network and series)-l' one of the choices should not Bluetooth? If so, how can I bluetooth as a choice?

  All ideas, thoughts on how to connect?

  Thank you

  Chris

  After many hours of reading the discussions in all these conversations - the hot sync finally worked.

  Lessons learned

  (a) make a complete ' clean uninstall software palm "-see various discussions on how to complete

  (b) uninstall Bluetooth if already installed

  (c) re - install Bluetooth (in my case was a dongle from Kensington) and let Windows applies the correct drivers * DO NOT install the software from the CD with the dongle *.

  (d) re - install the Palm software

  In Hot Sync - I now have the box Bluetooth connections and followed by notes prescriped within Palm Assistance.

  Worked like a charm. Solved!

  System - Vista 64-bit

  Tungsten E2 Palm

  The road to the next issue of Vista!

• Problems HotSync - Bluetooth option missing in connections

  After installing Windows 7 RC, 64-bit, I had to HotSync my Tungsten E2 with Bluetooth, rather than use the cable.  I bought and installed an Azio Bluetooth dongle (and included the Toshiba Bluetooth software) without a hitch. However, when I created my HotSync options I found that I couldn't choose Bluetooth because the option was not simply present on HotSync Manager/connections.  VERY frustrating.

  Buried deep in a another thread on this forum was the solution: go to control panel | Programs, remove the Bluetooth drivers and restart.  The device is installed with the Windows drivers again.  As if by magic, the Bluetooth option appeared on the HotSync Manager Connections window and everything was good.

  Of course, some computers come with the included Bluetooth option.  For those with x 64 Windows AND have the third-party Bluetooth drivers (other than Windows) AND are having HotSync problems because there is no way to activate the Bluetooth option, the hotfix may be similar - uninstall the drivers and use the native Windows drivers instead.

  I suspect that this issue can come down more, that those who do not always have HotSynced with Bluetooth is now required to do it because they are moved to x 64 Vista or Windows 7.  Palm does not have this problem on one of their pages to support - that I could find.

  YES!  It worked for me: "buried deep in a another thread on this forum was the solution: go to control panel | Programs, remove the Bluetooth drivers and restart.  The device is installed with the Windows drivers again.  As if by magic, the Bluetooth option appeared on the HotSync Manager Connections window and everything was good."

  THANK YOU SO MUCH!

• Z22 will be with Desktop but not Outlook hotsync? Why?

  No device

  Microsoft Outlook has added to my PC, so it would be ready for the possible purchase of the iphone - my first smartphone.  Was so excited that I was able to port over my calendar information and address book of my Palm Z22 to the new smartphone.

  uninstalled (using revouninstaller) Palm Desktop, given that I read that I must have Outlook installed clean install first and necessary to be able to change the method of hotsync from palm desktop to outlook

  Reinstalled 6.2 Palm Desktop and when I got to the screen with the choice between Palm Desktop and Outlook, I clicked on the option I wanted to sync using Outlook.

  First hotsync went to Palm Desktop and Outlook calendar left et al. empty.  ??? Why?

  Even second HotSync problem.  ??? Why?

  Impossible to find anywhere in my hotsync Manager in the office or on the Z22 where I can make changes to the hotsync...

  So now I have handy dandy new version of Palm Desktop which is (still) syncs perfectly with my z22, but doesn't help me prepare for the Iphone, because I will need my calendar/address book/notes data in Microsoft Outlook in order to transfer to the iphone (or any other smartphone also)...

  Just to remind, never had / have problems with the hotsync process, just try to change when the data is intended.

  Using Windows XP and HotSync Manager 7.0.2 and Palm Desktop 6.2 with Palm Z22

  Want to synchronize with Microsoft Outlook 2007 (a SP2 already installed)

  Help!

  I did some research on Google more and FINALLY found some instructions that actually worked!  What are eHow entry titled "How to move a calendar from a Palm Desktop for Outlook".  I did NOT find it directly from Google, but rather as something in another post that brought me kind of by chance for this post...

  Anyway, everyone should carry out this manoeuvre, here are the instructions:

  Go to the start menu and select programs.

  Move the slider to the Palm folder in the menu programs

  Click on the choice "enable the palm outlook conduits".

  Bingo!  He corrects the outlook conduits, and then you are set.

  DON'T FORGET, IF YOU ARE NEW IN OUTLOOK AND YOU WANT TO TRANSFER INFORMATION FROM YOUR PALM, YOU MUST GO INTO MANAGER HOTSYNC IN APPLICATIONS AND ALL SET TO GO THE OFFICE RATHER THAN SYNCHRONIZE POCKET.  synchronize is the default value.  This gives you all this emptiness, that is losing your data... not a good idea.

  Beware that the first synchronization of your handheld to an empty outlook may take time LOOOOONg, if your calendar years ago your Palm like mine don't...

  Now, I have everything in Outlook.

  Case solved!

• Compaq Presario SR2010NX beep code error starting: longbeeppausecontinuinglongbeepspausebetweeneach

  Hello.  My Compaq Presario Desktop PC SR2010NX of 2006 began just not start.  It gives me a sound code of long beeps that accompany pause after each beep and continue indefinitely.  I have tried convenience cheques, and it looks as if it was the 'memory '.  My question, FEI's memory, what cards are hardware compatible with my PC.  I had a breakdown.    to install a new set of 2 GB cards in July - and I had technicians immediately reinstall my old 2 cards (issued factory) replacement cards they have advised me to buy are not compatible, and when I went to pick up my computer, the computer would not start.  I have askede to reinstall my old cards and the computer booted suceesfully, and I left the store!  I am sure that I do not know what new products could be compatible with my old PC.  I thhink 4 GB is too myuch for my computer, and he couldn't get half that - but what brand should be like new hardwrae?  I wasn't expecting my old cards fail when they were resettled - three months since the change of memory attempt - thre months they started normally.  They have been re-hurriedly harnessed and dismissed the case, and then I left the store.  (The tech threatedned me with fear of "motherboard failure", which just made get the computer and leave immediately.  The old cards cannot have been relocated safely.  I'm taking it - but I will not be pushed around.  Of course - as old as mine PC would gradually motherboard failure.  Until it fails.  It was the memory card, but what woud cards my PC take that would be accepted as new hardware and allow my PC to boot up normally, if it is the cards and not yet the motherboard?

  I have now read the post with indicator on the upgrade memory.  It was very useful, and I wrote notes for the Presario.

  It says, maximusmis 2 GB to 1 GB cards/no stamped with the form of the data of motherboard page.

  It is divided between 2 cards 512 MB factory.  It has only 2 slots.

  Thank you.  My Compaq desktop computer has grown on me.  I got Vista bfore and I didn't know what I think.  If it can be repaired, I think 8 years (purchase date 4 November 2006) were fun for the low-end model.  It was a good choice, and I have never regretted buying at what cost.  It was better than expected.

  I haven't used my Compaq Presario continually over the past eight years - that's why it lasted so long!  Dud ut do work, however.  I had retirement is put online last year

  I liked HP Photosmart first 6.5 photo editing.  I liked Wordpad.  Mechanically, it was scientifically.  The material began to go when the built-in CD/DVD internal drive has failed.  I bought and had a replacement (DVD player (cd) internal HP) installed in July 2014.

  The new internal DVD writer HP compatible service pack XP? I have SP2) - I don't think it's about compatible new material.  This caused unable to start new businesses after three months?  New feature of device recognistion and old motherboard? Don't know?  (short circuit)?  I left the old CD/DVD recorder factory in its case - it's there and the springs are working to open and close the casing and check it / A short?  Don't know anything about electric

  Another point, when the original memory card 512 MB on factory 2 cards have been resettled, he was press-technicians to get the computer to boot - so the computer's case has been closed.   (I took the PC on their part awqay as fast it was closed upward).  I thought safe in maintaining clips?  Maybe not securely harnessed.  Could also be from the old factory of 512 memory cards in each clip spare wedge - to alternate which card and which support clip.  I have not tried this or re-cutting to the place of repair.  (I do not have any technical installation and not have ny contact danger here - I do not touch the computer).  It is the matter of repair - these people in a hurry, they sell - they tell you something will work, they overtest, they overdiagnose - they push you autour-yyou never recover your computer to use as is - it is disturbing to go, if you are not a consumer savvy or technical.

  May not be able to take new material old = change motherboard in chipsets, etcs. features.

  Ialso had an error saying years only. IPC Port would not work.  (. COMI is the base model for the CPA called Palm Zire Hotsync Manager.  I don't think the Palm Zire software uninstalled iI, and the message is a (!) origin unknown error message is:. COMI, has failed to initialize.  It's a pop-up error message appeared during the startup process.  The repair people off the message.  The boot has been at once - disconnect - the plugin twice and electric start.  It was based on the plug in the socket, removed and reconnected before the start =.  Technicians tried to solve this problem, but it is not important from my point of view.  All of those, cumulatively, could be symptoms of a hardware change progressive until the end of the use of PC - they are all could be chips card mother falling out or something there (the CD player, the.) Port COMI - don't know about the real, even if start program - which can only be that.)

  I tried the power reset function discussed in the Troubleshooting Online Web pages - 5 seconds to reset, / 15 seconds to reset - power off (unplugged) and hold the power button / stop without plug-in for 5 or 15 seconds (depends on the Web page of the online manual!)  Once, after an attempt to reset of fifteen seconds, the computer has no beep, and he almost made a second rumble noise - but then no change afterwards.  The redonnee start-up sound code beep after that the computer was turned off and then restarted again.

  PC is sitting in his corner.  I don't want someone break while I think about what to do.  He's going nowhere right now.

  This is the first time, it would not start.  I am a bit worried and disappointed, but, I know that my PC is old, and one day, it will fail to work.  That is the reality.  If it fi fixable, I'm interested to hear about the fit-it.  Thanks again.

  Hello @lliil,

  I read what you posted and it seems that you have a hardware problem with your computer. The only thing I can do for you is to provide you with the HP support document: BIOS Beep Codes, which will help you to correctly identify what's wrong with your computer. Given the age of the computer apart from this if you want to know if it can be fixed, I recommend do you get into a local computer repair shop and let them take a look.

  I hope I helped. Thanks for posting on the HP Forums. Have a great day!

• no connection between my Palm Tungsten E2 device and the desktop

  Operating system windows 7

  HotSync problem appears and says please check your configuration and try again.

  local use with cable

  any ideas would be useful.

  Thank you

  After tinkering around a few others, I think he's starting to work as I had remembered.

  Thank you for your patience and your help.