Similar Questions

• H Satelite L755-13 - the speakers shut downs every few minutes

  I have experience with speaker problem. I have installed new drivers, even reinstalled new win7 64 bit.
  However, speakers shut downs every few minutes. If I start to use earphones instead speakers back in work.

  Please, help to solve this problem.

  How to understand this issue?
  You start your laptop and this computer you do exactly? What happens exactly?
  Is everything OK with headphones?

• Error: "iTunes has detected a problem in your audio configuration. Audio/video playback may not work correctly. »

  Original title: my sound card is missing or disabled?

  My sound worked very well with some speakers the other day, when suddenly it stopped working. The sounds again, but with sounds such as those where an error message is displayed is not default reading/game audio is not.

  I recently got this computer work again once I've been using another computer for awhile, so I was messing around with some parameters that could be the cause of this.

  One of my games says my sound card's 'missing or disabled', & iTunes says "iTunes has detected a problem in your audio configuration. Audio/video playback may not work correctly. »

  Thanks, Toby

  Re-install the drivers audio from the website of the manufacturer of the PC/laptop.

  See you soon,.

  Jerry

• A few minutes after HDMI connection my Satellite breaks down and restart

  Dear people of good day,

  I hope you can help me.

  My new laptop perfectly transfers the signal HDMI audio/video. However, after 3-10 minutes the following occurs:
  The laptop screen is almost entirely black. It remains strange pixelated horizontal stripes on the screen of the laptop. The TV screen has in which a fixed image. In addition, a buzz is coming during this process.
  Then the computer restarts, so is completely black and the HDMI signals transmission is interrupted.

  There is no difference is I use laptop on the power cord or try it on battery power.

  The laptop from my friend (different model, but also Windows 8) works correctly with the same TV and the same new HDMI cable.

  I hope someone can help me with this problem. Thank you in advance.
  If it is a warranty case I return again.

  Message was edited: assignment has been translated

  It is not easy to explain what the problem is here.
  I recommend you reinstall your laptop with version and function test of original Windows with the "settings" again. Do not install anything either and do not change the standard configuration. Just test it.

  If the problem persists I would recommend you to contact your reseller or Toshiba service provider directly.

• Gurgling noise in Audio/video playback

  Hi, I hope someone can help any detailed instructions would be great.

  When playing audio/video, an intermittent gurgling noise (freezes too) occurs if playing stored or streaming media (audio and video) for example iTunes, YouTube, windows media player, etc..

  All solutions please share! Have already updated drivers. Contacted customer service, basically, they did the same drivers uninstalled then reinstalled does not.

  Note After searching questions, which seems to be a problem for other people too, not only of Sony. If it helps, even if the laptop is model SVT13134CXS VAIO T series 13 Touch Ultrabook.

  Thanks in advance for any ideas.

  P.S. Here's an example of how it sounds, in my opinion, it starts at about 01:30
  http://m.YouTube.com/watch?v=CF9Pvdsz0UM

  To further isolate the issue, you can run the Checkdisk utility under windows.  You can also launch the VAIO Care and use the tools in this application.  There are some hardware diagnostics, as well as the VAIO Care convenience store and one-click-care.  These tools can scan your PC and try to solve the problems.  Give it a try and see if that will make a difference.

  If my post answered your question, please mark it as "accept as a Solution.

• (I tunes has detected a problem with your Setup audio. audio video playback is not always possible.)

  Have already downloaded a new audio driver on the internet, its max. To install it but still no sound. always the same error message. Wran diagnosed and sought to sounds and Audio devices in Control Panel, all devices are listed as working properly. frustrated and need help.              Ideas, please, I could use some help. Thank you...

  Hello

  Are you facing this problem with ITunes?

  Try to set up the device in the default playback tab and check whether the problem is resolved.

  1. Open Audio devices and sound themes by clicking the Start button, click Control Panel, hardware and sound, and then clicking sound.
  2. click on the playback tab, click speakers and set its default value.

  Check whether the problem is resolved.

  Try to play music using Windows media player and check if it works.

  If you are facing this problem with ITunes, you may have to uninstall and reinstall the program ITunes that could help you to fix the program.

  If this does not work, I suggest you to contact Apple for assistance. Unfortunately, we can not help with third party software/hardware changes.

  http://www.Apple.com/support/

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• Stuttering/buzzing for Audio/video playback

  Hello

  Recently I had a few problems reading any kind of media.  At regular intervals the audio will gel/jump for a second and make a loud grinding noise, then resume.  This happens with music, video streaming, games, pretty much everything.  If I watch a video or a game, the screen freezes for a second, and then resume.

  I use an Inspiron 1545 with Windows 7 64-bit, SP1.

  I tried everything I could think of, update all my drivers, codecs, anit-virus ongoing relocation of execution and cleaning on my system.  I have found that sometimes the offset is in my DPC latency spikes, but sometimes they aren't, and I don't know what is causing the spikes.  I tried most of the solutions here: http://en.community.dell.com/support-forums/laptop/f/3517/p/19142484/19265470.aspx#19265470 , but nothing seems to have helped, and I'm getting a little desperate.

  Any ideas?

  Try to uninstall Dell Support Center and see if you get an improvement.

• power audio, video playback

  I can't hear audio on videos, I play... volume checked and everything seems OK.

  Help!

  Is it a problem suddenly which has just started, or has it always been a problem?

  Also, I noticed that you posted in the section Windows 8.  Windows 8 is nearly three years old.  In recent years, Microsoft has fixed hundreds of problems and the 8.1 update to correct the problems.

  To solve your problems, I recommend you to install the update as soon as possible.

• Problems with audio/video playback and the Source window

  I have some videos that I try to import into my sequence. Whenever I have open the video in my source window (or drag it to the timeline), the sound goes crazy. He starts to jump and identified himself. When I open the movie file in Quicktime format on my computer, it opens and plays very well. In addition, I don't know if it is not connected, but sometimes, when I open a video in the window of my Source, there is no audio. I can drag to the sequence and double-click on it to put the video of the sequence in the Source window and it plays very well.

  The video that I have problems with is a .mov, filmed from an iPad (not sure what model of iPad). It is filmed in Portrait mode, do not know if it matters. Please let me know what other information would be necessary to solve this problem.

  
  Thank you!

  First, answer the questions in the FAQ of Information http://forums.adobe.com/message/4200840

  Second, it IS possible whether the ipad video like video iphone

  IPhone will not edit easily because it uses a variable rate

  -A fix in the #22 http://forums.adobe.com/thread/934466 message

• How do I change the speed of audio/video

  Hello
  I'm trying to change the speed of audio/video playback, so I could play faster, but I did not find any solution.
  It must be changed dynamicaly - there is no possibility of normal production, quick read of file.
  
  Thank you
  
  ----
  LN

  Quote:
  Posted by: spoofan
  Can Flex convert flv to swf somehow dynamically?

  N °

• ProBook G3 450: Impossible to update driver Conexant HD Audio

  I tried to update the Conexant HD Audio Driver on my ProBook 450 G3 (Win7 Pro 64 - bit) whenever HP Support Assistant offers the update. The last proposed update was SP74946 (10.0.877.61 Q5). The update seems to be successful and I am prompted to restart. After restarting, the older version of the driver (8.65.133.0) is still installed and HP Support Assistant continues to offer the update. My system is up to date with all of the other horses and Windows Update installed.

  Hello

  You are welcome

  This looking a little further, I think I can see what is the problem (I do not work for HP, so you can check this with them).

  Anyway, looking at the cva for this update on the link below (under the [General] section) the pilot that version is listed by Conexant as 10.0.877.61, however this is assigned the seller Version 8.65.133.0_9.0.69.53 - 2.109.0.0 which is what you have already installed.

  http://FTP.HP.com/pub/SoftPaq/sp74501-75000/sp74946.CVA

  So what I think happens is that HPSA sees 10.0.877.61 as a newer version, but it installs with the seller (HP) Version number 8.65.133.0 driver - and so the cycle continues.

  In addition, when you uncompress the SP74946 Installer, the worm text document lists the version of the driver as 8.65.133.0_9.0.69.53 - 2.109.0.0

  Kind regards

  DP - K

• Driver Conexant HD Audio - Satellite P100 PSPA3C Win XP problem

  I have a Satellite P100 PSPA3C MA202C.

  I found on the Web from Toshiba site a new Conexant HD Audio 3.44.0.0 driver version for my laptop (Windows XP, 3 GB of RAM)
  and had the bad idea to install it. After installation, the sound is terrible Crackle and interruptions.
  including the sound of Windows boot at startup, when you first open during playback and audio files.
  When a UC program gets started.
  It's never happened before.

  I acknowledge that during installation, I received a message from the system
  warning that this driver is not signed as having managed the "Windows logo test '.

  However, the same situation stands for previous versions of site Web from Toshiba, like 3.21.0.52, who gave the same problems.
  Then I wanted to let Windows choose the right driver, but it turns
  "Microsoft function driver UAA for HD Audio Conexant Waikiki" which provides its own, but has no audio in (microphone).

  So now I'm stuck with the crackling and interruptions of Conexant, or with Waikiki have no microphone.

  It's strange, because the initial configuration worked well. Unfortunately, I do not know how to restore the original configuration,
  It is not written anywhere, that the system cannot understand itself and of the restoration came with the computer dvd
  only allow for a radical total restoration of the status of the day of sale, which is not acceptable.

  What a disappointing experience!

  Can someone help, please?

  Hello!

  S DVD supplied with the computer are called recovery disks and it's the way to return to the factory settings.
  The disc contains the Windows preinstalled with all the drivers and tools of Toshiba.

  I know it's strange, but in my opinion, there is no other way to solve this problem. So back up your data first HARD drive will be completely formatted.

  Good bye

• Firefox hangs and I don't know where to find "subject: breaks down.

  In recent weeks, Firefox started to plant several times and quit unexpectedly - especially when I click to open it. I often get the annoying message "well, this is embarrassing." More useless. I sent the report of the accident and expect to hear from you as to why I have problems, but nothing happens. I can't find how to locate the ' topic: breaks down ' in the address bar. Can you explain this.

  On a Mac, it's Cmd + L to go to the address bar.

  If you have submitted incident Breakpad reports then it would help if you post the ID of one or more reports of incidents Breakpad.
  You can find the ID of the submitted crash reports on the Subject: hangs page.
  You can open the Subject: hangs page through the address bar just like you open a Web site (topic: is a protocol for accessing the internal pages).
  A GUID crash looks like: bp-xxxxxxxx-xxx-xxxx-xxxxxxxxxxxx

  You can copy and paste the links or the crash IDs of some of the most recent accidents, and post them on this forum.

• How can I make sure that my music on my Ipod Classic is not lost forever, if it breaks down?

  How can I make sure that my library of music on my Ipod Classic is not lost forever, if it breaks down?

  Back it up.

  Your music library should never exist only on your iPod.  It must be present on a computer in iTunes, and to be sure it must be saved on an external drive also.

  If your library no longer exists on your computer for whatever, reason, you need to extract the iPod.

  turingtest2 offers you several ways to do this in his user tip found here:

  Recover your iTunes from your iPod or an iOS device

• Break down and an object of a list/table of the index reference

  TestStand using I'm trying to figure out how to break down and an object reference to a table/list of the index. My sequence is attached. I received a few tips of the 3rd developer with VB code, what should be done. I'm having a problem translating in TestStand. VB code follows the description.

  I use .NET to run a 3rd party software using a sequence of imagery system and run 3rd party software tests. In TestStand, my "GetCurrentTests" approach, when an object for a specific sequence reference, returns a reference of type object ' object reference(system.collections.generic.list'1[Radiant.Imaging.TSEngine.ICommand]); expected return a list of tests in the sequence of part 3.

  Next steps "GetCurrentPattern" needs to index through this list in order to get and then define and display the display model of the specific test to start the specific test. This next step class is RadiantImaging.TSEngine.ICommand (interface) and returns an object reference (radiantImaging.PatternGenerator.Patterns.Patternbase): a reference to the model.

  What I'm confused about is decaying of the 'object reference(system.collections.generic.list'1[Radiant.Imaging.TSEngine.ICommand])' return value in order to provide the? indexed reference object for "Model of GetCurrent" step.

  VB code is provided below for me that shows how it can be done in VB. I'm not familiar enough with TestStand, .NET and VB to break down this >

  Any suggestions or advice is greatly appreciated.

  VB code:

  Public Class Form1

  Private PatternGenerator.IPatternGenerator MPG

  Private WithEvents mTestSequence as TSEngine.TestSequence Private Sub InitializeButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles InitializeButton.Click

  TSEngine.Settings.MeasurementSource = TSEngine.MeasurementSources.Camera

  TSEngine.Settings.SaveMeasurementsToDatabase = False

  TSEngine.Settings.SaveResultsToDatabase = True

  TSEngine.Settings.SerialNumberAllowDuplicates = True

  mPG = TSEngine.CurrentPatternGenerator

  TSEngine.Initialize ("C:\PM 4616197.rdb Calibration")

  TSEngine.Databasename = "C:\default Alpha_PEK_Date.pts".

  TSEngine.InitializeCamera)

  End Sub

  Private Sub RunButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles RunButton.Click

  mTestSequence = New TSEngine.TestSequence (1)

  Dim result as TSEngine.Tests.ResultEnum

  For i As Integer = 0 To mTestSequence.NumberTests

  Dim p As PatternGenerator.Patterns.PatternBase

  p = mTestSequence.CommandList (i). Model

  p.PatternGenerator = mi/gal

  mPG.MonitorType = PatternGenerator.Monitor.PrimaryPartial

  ' p.PatternGenerator.MonitorType = PatternGenerator.Monitor.PrimaryPartial

  p.PatternGenerator = mi/gal

  p.Show)

  result = mTestSequence.RunSingleTest (i)

  Dim results As List (Of TSEngine.IResult) = mTestSequence.CommandList (i). Result

  Results (i). Name

  mTestSequence.CommandList (i). ResultMeasurement.

  Next

  End Sub

  Technical support solution: "I spoke with R & D and they informed me that the type of data in question is a generic class that is not supported with the .NET adapter. You can change the data type of a code module to another using a data type of object reference, but you can not manipulate the generic classes within TestStand.

  "" "" You can find this information in aid of TestStand under NI TestStand environment reference help"TestStand adapters" adapters for .NET ' adapter .NET '.NET called settings ' settings not supported. Here, the solution would be to ask a code module that performs this task for you. »

  Change the settings for call .NET

  Parameters not supported

  The TestStand .NET adapter cannot call methods and properties that have arrays as parameters in staircase or return types and does not support structures that have shredded the members of the group.

  In addition, the .NET adapter does not support creating or call methods on generic classes.

  My solution was to implement the foregoing in VB.NET from TestStand .NET adapter does not support .NET generic data types.