DV6 1330et: HP dv6 1330et networ update map

Similar Questions

• HP Pavilion dv6 B8N04PA #ACJ: update the configuration of failure. Restoration of the changes

  Whenever the laptop to install the update. Then when you restart it will read the updates of configuration failure. Restoration of the changes.

  This continues until 30 minutes before it finally restarts

  Hi @mayurz91 ,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your problems of HP Pavilion dv6-7040tx laptop and with updates.

  Here is a link to the HP Support Assistant. Simply download and run the application and it will help with the software and drivers on your system.

  If you run an antivirus protection, this could be a problem. Disable temporarily to perform the required updates.

  Note Remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.

  Plug the power supply directly to a wall outlet works. Do not connect it a power strip, surge arrester, or secondary power source as this could cause and issue.

  I hope this helps.

  Thank you.

• Uncertain of the dv6 1143TX bios update

  Hello, I was wondering weather or not, I need to update my laptop Bios. I did not update the bios since I bought it and it does not say that there is an update available. I am skeptical about the weather or not, it's an updated value, because I saw many others users have serious problems of execution of such update.

  My laptop model No. is dv6-1143TX and my version of Bios F.12

  Do I have to update, what problems will / may incur the update, what happens if food not up to date, and if I need to update the update I don't I need?

  Any help, suggestions and information is welcome.

  ~ Josh

  Hello

  If everything is already running an update is not recommended.

  What can go wrong

  You can turn your laptop into a costly and unnecessary Clipboard if you don't update the BIOS by following the instructions with precision.

  This means that if you turn off your laptop during the update you will definitely brick your laptop.

  What happens if you don't update your laptop

  Nothing.

  If it works and you don't try to fix what's wrong, that then you does not work in Murphy's law. (Fix something that is not broken and it will probably break)

  Kind regards

  ERICO

• dv6 7309tx wanted: HP ENVY DV6 7309tx BIOS update after the corrupt bios, SP68425 F.2D does not work

  The problem began with a blue screen after the updated copy on the road on machine of internal to external hard drive...

  After the reboot, the screen went white and CAPS LOCK has 2 flashes

  Device: HP dv6 7309tx envy

  Current BIOS: 22/01/2013 F.24 / 181E

  Downloaded SP68425 with F.2D since 08/2014

  insydehflash.exe in the package on a spare computer (no HP) does not support the extraction to USB, I will need to update the bios on device dead...

  Device is now in HP PC Hardware Diagnostics UEFI, where I can add usb and start to update...

  However, the raw after extraction of sp68425 bin file is not accepted...

  and I can't go any further with the tool insydeh sp682425 because it does not allow me.

  There is no real BIOS option the last update on the HP support who is crazy enugh...

  F.2d

  FTP://FTP.HP.com/pub/SoftPaq/sp68001-68500/sp68425.html download: ftp://ftp.hp.com/pub/softpaq/sp68001-68500/sp68425.exe

  Please help to send me the appropriate files or explaining how I can generate in a different machine than the one update has no boot?

  Thank you

  Hi all

  If the solution was done by a kind shop in Hungary, http://reballing.hu

  and a specialist in firmware http://vinafix.vn

  So apperently my BIOS has been corrupted that CAPS lock sign showed and it could have been rewritten with HP Diagnostics if HP could provide the RSA key for her...

  In this case it is not provided, you don't have that one other solution, to find a nice (as reballing.hu) repair shop, where the guys are nice enough to disassemble your computer, take the chip and write the data without the requirement of RSA software HP Diag using a writer BIOS correctly. You can also buy writers of the bios and the tools, but he could be uite costly and risky for you to do...

  So you have a repair guy, the only other thing that you might need to trust is the dump of the BIOS correct, please note that the supplied with the softpaqs .bin file is encrypted, so it must be decrypted, it is not an easy task, it worked for me too after awhile, but better to find a provider of bios (saves time for you as well and that is why HP is not willing to give it to you, you have two choices: make a work computer, and read the bios in this way (you must have the identical chip and content, so preferabily the same card mother or product)

  Or go to www.vinafix.vn and ask them to provide you with, these people are kind enough to explain how the thing works and what you need to write your own return data.

  So once that you set is not more than 30 minutes for a handy guy and as they work at the time, it is fairly cheap as well, it cost me 25 USD total (10 for bios) and 15 for the actual work done

  It's a shame that yu can not really find information about this threat, and also that it can happen to your computer at any time it seems that, always in waiting to see what caused, and if she came back or not... but as of now, I am pleased that the computer is back on!

• Recovery BIOS dv6 - 1247cl - Help update!

  I am a professional person THERE who can not find a valid way of correcting a bad BIOS update.  I downloaded the latest BIOS online, only to have Flash my BIOS and in the end, freeze my laptop.  I left the laptop for an entire day, until that I had no choice but to unplug the unit turns off.  Now I have a laptop Bricked through Hewlett Packard.   The BIOS update is a package of Insyde.  I tried to put the BIOS file, I took out of the folder and tried to rename it to 3623.BIN and put on a USB Thum Drive AND even tried it on a CD - R.  Disconnected the battery and the power cord, then tried to turn on the laptop with the PEN drive installed, hold down the WINDOWS key + B key, as I read everywhere on the internet and also tried the method 4 ARROWS and even the ESC + FN and FN + B keys.  NOTHING HAS WORKED.  The laptop beeps SOUND repeat when lit and seems NEVER to play the CD or the USB key and close the CAP LOCK and NUM LOCK light just flashes after the approximately 10 beeps stop... anyone know how really solve this problem?  Believe me, I've read all over the Internet and everyone seems to have the USB STICK to boot on their DV6-XXXX models, but no one has confirmed this works on the model DV - 1247CL.   Seems like my last resort would be to send the laptop to someone who claims that they reprogram the BIOS in laptops for $100 + shipping... so it's $150 when I have a big feeling that they would do a recovery method that I can not make it work.  The HD has been deleted, so there's no EFI partition as a validation request he needs for the method WINDOWS + B works.  Any case, I have a laptop brick beep and I got mad HP is USELESS even responds to emails.   Maybe they'll wake up when someone sues them and it becomes a class action.   The FLASH worked, but then NEVER rebooted my laptop and has frozen, now it's a brick.  Any help would be appreciated because of all the methods I read did NOT work on mine.

  THE FIXED!  * beep *... took forever.  To start, my keychain Thumbnail-Sized Patriot-brand USB 4 GB drive has not been recognized by the laptop, so I tried a normal size 8 GB Memorex and it worked.  I'm not sure what makes the work, but I've mostly renamed my file 3623.bin for EACH product listed in the original softpaq platform.ini file (3623-3629) and also had .fd and ROM renames on the USB drive too to 100%.  I also did the Hewlett-Packard\BIOS\current and Hewlett\BIOS\previous records and the record of SystemDiag made by the UEFI utility that I have listed.  My computer seemed a beep every 5 seconds for about 5 minutes, until finally it stops.  When I turned it back on, it says my CMOS was disabled and I back when asked, rebooted, and not, I get the BIOS screen!  Finally!

• Need help. HP dv6 2090er. Update module Wi - fi

  
  

  You can use any wifi card listed in the manual, but there must be a version of the map with a HP part number, not just the same chipset. Make sure that you have the right manual for your dv6-2090er:

  Your manual

  P. 3-6 to 3-7. The card must also be the type for your country. I don't see the Broadcom 4313 on your list.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• DV6-6190us AMD update package fails. Necessary for recommended MS hotfix

  I get a blue screen of death after installing the recommended MS hotfix KB2670838 and using Internet EXPLORER 9. I stopped the problem by uninstalling the patch. Others on the MS for a report of similar problems with computers laptops HP and AMD switchable graphics card. MS advises prevention hot - fix for the moment and is apparently change an option until the issue is resolved.

  One user said that he solved the problem by upgrading the AMD drivers to the latest version. I tried that with the HP sp55092.exe install package on the download page of my dv6. Installation fails with the helpful message "Application install: install package failed! The progress screen said it was installing the MS Visual C++ 2010 redistributable runtime. MsiInstaller gives error event 1013 with the text "product: Microsoft Visual C++ 2010 Redistributable - 10.0.30319 64 x ‑‑ A later version of Microsoft Visual C++ 2010 Redistributable - 10.0.30319 64 x is already installed."

  Installed versions (x 86 & x 64) running on my computer are 10.0.3.40219.  It seems that the package installer on HP support site cannot handle a newer version of the execution. I presume that the reason for the new version on my computer is software that relies on the SP1 version, so downgraded to the old version would just move the problem even if it gets the driver AMD installed package.

  Anyone else seeing this? HP updates the installation package? Any ideas?

  JoeM

  Pavilion dv6-6190us; Win7 Home Premium 64

  I shot the most recent version of the C++ 2010 runtime that blocked the Softpaq installation, installation fact and re-updated C++ 2010 runtime to the current version. The Softpaq, Intel and AMD drivers updated to the latest versions (on the site of HP). Then I reinstalled the MS fix and were broadcast for 12 hours, with no more BSODs.Funny thing is that the Softpaq still gave me an error on installation (relating to execution C++ 2010) but this time continued and completed.

  I didn't want to steam. I'll look further and maintain the ITI in mind for future updates. It seems that HP is almost through with the software/firmware for the DV6s.

  Thanks for your suggestions,

  Joe

• Pavilion DV6 entertainment: software update the Pavilion DV6

  Madam/Sir.

  I own a hp Pavilion DV6 of Entertaiment, serial number; (Deleted content), product number; A7Q11EA, originally installed Windows 7 Home Premium, I decided to upgade Windows 10, strongly recommended by windows, but after a while the machine stopped working proply, sending a lot of warnings. I decided to go back to the original software installed but the phone asked a cd for a correct installation, of course, not having, that I found a copy of win7 Premium in which I installed in the hope of reaching to. I then reseached the net and discovered that a lot of windows, consumers have the same problem, at this point I don't know what to do could you please give me some advice on dealing with this problem? could hp provide me a copy of windows 7? If it would be useful if I could send the number of key windows installed originally on pc...

  I will be available at any time.

  Best regards

  Guido

  Hi @guido651,

  Welcome to the HP Forums!

  It's a great place to find answers and information.

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums.

  Learn how to post and more

  I understand that after upgrade to Windows 10 of Windows 7 that you had problems with the laptop.  You tried to return to your original operating system, but was invited to the disc that you did not.  Then, you used a Windows 7 disc to reinstall the operating system.

  If you do not format the drive and remove the recovery partition, you can use it to perform a recovery to factory.  If you format the disk and the partition has been deleted and you need to contact HP support to acquire a laptop HP recovery kit.

  Here is a link to help you try the recovery.

  HP computers - performing a recovery of system HP (Windows 7)

  During the recovery process, there will be an option to backup your data to prevent loss, if you don't the have not made one and I would like now is the time.

  HP and Compaq Desktop PCs - restore files that have been supported to the top using HP Recovery Manager (Windows 7).

  If you need to get the recovery kit, please contact HP to Contact HP Supportassistance.

  To say thanks for the reply please click thumbs up button below.

  If this Treaty your concern please choose the solution provided to help other posters.

  Good luck!

• HP Pavilion DV6-2090er CPU update

  Hello!

  Could you help me, please? I could change the CPU on my laptop HP Pavilion DV6-2090er for the best? What does not work on my PC?

  Hello:

  Yes, you can, but I don't think it would be worth the expense or effort to do so.

  Here is the link to the service manual for your laptop.

  http://h10032.www1.HP.com/CTG/manual/c01860375.PDF

  We'll find taken processors supported in Chapter 1, page 1.

  You can upgrade to the processor i7-820-QM, 1.73 GHz.

  Paul

• HP Pavilion dv6 6080 ep: update of HP Pavilion dv6 6080 ep memory

  Hello

  I own a HP Pavilion dv6 6080ep. It came with 4 GB of RAM and it has an intel processor i5. In order to do an upgrade of RAM I get Manual HP on memory full capacity. It is said that for this model, with the i5 processor it could go up to 16 GB of memory. When I searched for the spare part of HP, he said that both the 621569-001, the 4 GB and the 634091-001, for the 8 GB, should be replaced by 641369-001 and 670034-001. Let me stress to you that these replacements have slightly different form of the original. I searched among the brands of memory there, specifically Kingston and crucial that said for this model I can get 8GB in mind. I think sincerely lost now. The amount of memory can my laptop really gets and there is no record of RAM I should know about off?

  Thanks in advance,
  Paulo

  PS: I was planning on getting a tp of Kingston KVR1333D3S9 / 8G add to my original 4 GB. (for a total of 12 GB)

  This is max 16 GB of DDR3 - 1333 PC3 - 10600 SO-DIMM aka. DDR3-1600 will downclock at 1333, and that's what you're probably see. I'd get 2 identical modules and not mix and match old and more recent memory. You prefer the modules with 8 blocks of black memory on each side (low density) as the HPs like the better guy.

  This works, for example:

  http://www.Amazon.com/G-skill-204-pin-so-DIMM-laptop-F3-1600C11D-16GSL/DP/B00HHDUEDG/ref=sr_1_14?ie=UTF8&QID=1427144332&SR=8-14&keywords=DDR3-1600+so-DIMM

  Even though it says 1.35 volts it will work also to 1.5 volts if necessary. memory of 1.35 volts is a better product because they choose only the best RAM for low voltage memory chips.

  Manual

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• pavilion dv6 7031tx BIOS update

  I have a Pavilion DV6-7031TX laptop and I would like to add the latest version of the BIOS that I install windows 7 or 8 as UEFI. The bios that is currently on the laptop is dated 2013 and its number is F29. When I go to the support page, I get a listing for the f.0Une of the 2012 Version. When I check the windows list 8 it is a BIOS date of 2014 F.2D number.
  The BIOS located on the laptop is nowhere located? This machine is less than 12 months and it seems odd that this would have a version of BIOS HP does not list?

  I DID using the phone number and talked to someone who had NO IDEA what I was talking about and all I want is a simple answer, I do use install the BIOS listed for windows 8? (don't understand why HP has it filed under win8 just like win7 can also use UEFI environment).

  I hope that someone at HP knows the information I'm looking for?

  Hello

  It certainly isn't the first time I saw a laptop comes with a version of bios that will never appear as a download option - I do not work for HP, so I can't give you an explanation for this.

  Regarding the latest version of the bios of your laptop, F.2D, the cva file lists Windows 7 and Windows 8, which is what I expected.

  FTP://FTP.HP.com/pub/SoftPaq/sp68001-68500/sp68425.CVA

  Kind regards

  DP - K

• Pavilion dv6 6170sl: windows update

  failure of the update of Windows (KB3038314)

  Hello

  Many users have same error:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_update/kb3038314-fails-to-install-get-the-error-80092004/596a3bb5-151d-4742-8EAB-420e45840077

  Please wait for a fix from Microsoft.

  Kind regards.

• DV6 6c65se: hp pavilion dv6 6c65se RAM update more low-speed clock frequency

  Hi I dedided to chenage my original RAM memory to a

  Corsair CMSX8GX3M2A1600C9 NB Vengeance 8 GB (2x4gb) 1600 MHz CL9 DDR3 SO-DIMM two memory Module Kit Performance

  When I changed to RAMto a new and restart a system, I was surprised the classification System went down from 7.6 to 7.4 could someone explain to me why this happened if the old RAM was unbraned in trouble from China? Why my new performance as Corsair is defined by the hardware to work on the low clock speed, also is there nothing in the BIOS to change the clock speed of RAm etc.

  Could someone help me in this regard?

  Thank you

  Hello:

  I can't tell you why the performance of WEI memory went down, but he certainly wouldn't.

  The faster the memory will run in your computer laptop is 1333 MHz, because it is the fastest speed of the processor i7-2670QM FSB can run to, so installation PC3-12800 (1600) memory provides no advantage.

  The original memory regardless who did, should have been 1333 MHz.

  You need a PC with an Intel 7 series chipset and the 3rd generation of processor core to memory to operate at its rated 1600 MHz.

• Garmin Express will not update maps on Nuvi 660

  My Nuvi 660 well recognized by GE reports error when I try to load maps update for it. Simple message is error: could not update the contact Garmin maps.

  Garmin responded with the following message:

  We found that the issue is not with Express, but with your PC. We recommend that you contact Microsoft, as it is a matter of context. Please tell them the information below:

   A BadImageFormatException exception is thrown when the file image of a DLL or executable program is not valid.System.Management is a built in component of .NET
  

  We apologize for any inconvenience.

  That was the total message.

  Help, please. Where should I go from here?

  My last post on this issue seems to have been deleted this week end last after a response from MS that does not solve the problem.

  Hello Bill,

  Thank you for your response.

  As you mentioned in the first post that it displays an error, "unable to update the maps Garmin contact", it seems to be question of Garmin.

  However, you can try to load maps directly to a SD card for an update of the map.

  Refer to this article:
  Can I load maps directly to an SD card for a map update?
  https://support.Garmin.com/support/searchSupport/case.faces?caseId=%7B0b087770-5dba-11E1-DD60-000000000000%7d

  If this does not help, then I suggest you to again contact Garmin support.

  Garmin support
  http://www.Garmin.com/us/support/

  Thank you

• Question about updating map of RAM and graphics on Equium A100-027

  Hello
  I have an Equium A100-027 with 1 GB of RAM (2 x 512MB modules)
  If I would like to raise the speed, which RAM modules would need? I also need a new graphic card, can I buy a graphics card or should it be some for my laptop?

  Hello

  in regard to your question upgrade:

  RAM-> you need 200 pin DDR2 RAM: http://en.wikipedia.org/wiki/SO-DIMM

  Graphics-> update is not possible, because the graphics card is soldered on the motherboard of your laptop, which means it s 'wired '.

  That's all